A tapped hole looked for the cylindrical wall its marking lies on in every face of every body of the design, measuring each face over all of its body's triangles. A body is now passed over when the drill line, widened by the hole's radius and a margin, misses its box (from the mesh it keeps, which the wall's triangles are part of): no face there can be the wall, so the marking stays the same. Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
1413 lines
66 KiB
Rust
1413 lines
66 KiB
Rust
//! What an evaluation costs after an edit at the end of a large design: the features before
|
|
//! the edit are reused, so the edit's cost must not grow with the bodies and imported files
|
|
//! the design already holds. A sketch on a fixed plane once moved every body of every placed
|
|
//! component into its frame, and every evaluation wrote every imported STEP file out again to
|
|
//! fingerprint it, so each sketch command took longer the more parts were inserted.
|
|
|
|
use std::cell::Cell;
|
|
use std::collections::BTreeMap;
|
|
use std::sync::Arc;
|
|
|
|
use solidcraft_geom::{Plane, Vec2, Vec3};
|
|
use solidcraft_kernel as kernel;
|
|
use solidcraft_sketch::Sketch;
|
|
|
|
use crate::eval::{PlacementReads, body_world, hash_placement, placement_digest};
|
|
use crate::*;
|
|
|
|
/// Work counted on this thread: bodies moved, STEP texts digested, joint faces and bodies
|
|
/// measured, bodies searched for by name, features searched for by id, bodies a cut (or
|
|
/// intersect) ran its booleans on, bodies searched for the cylinder a tap marking lies on, and
|
|
/// bodies whose faces a tapped hole read for its wall.
|
|
#[derive(Clone, Copy, Debug, Default, PartialEq)]
|
|
pub(super) struct Counts {
|
|
pub moved: usize,
|
|
pub digested: usize,
|
|
pub joint_faces: usize,
|
|
pub measures: usize,
|
|
pub body_searches: usize,
|
|
pub feature_searches: usize,
|
|
pub cut: usize,
|
|
pub cylinder_search: usize,
|
|
pub tapped_wall: usize,
|
|
}
|
|
|
|
thread_local! {
|
|
static COUNTS: Cell<Counts> = const {
|
|
Cell::new(Counts {
|
|
moved: 0,
|
|
digested: 0,
|
|
joint_faces: 0,
|
|
measures: 0,
|
|
body_searches: 0,
|
|
feature_searches: 0,
|
|
cut: 0,
|
|
cylinder_search: 0,
|
|
tapped_wall: 0,
|
|
})
|
|
};
|
|
}
|
|
|
|
pub(super) fn count(f: impl FnOnce(&mut Counts)) {
|
|
COUNTS.with(|c| {
|
|
let mut n = c.get();
|
|
f(&mut n);
|
|
c.set(n);
|
|
});
|
|
}
|
|
|
|
thread_local! {
|
|
static WRITTEN: Cell<usize> = const { Cell::new(0) };
|
|
}
|
|
|
|
/// A feature written out on this thread to be fingerprinted.
|
|
pub(super) fn count_written() {
|
|
WRITTEN.with(|c| c.set(c.get() + 1));
|
|
}
|
|
|
|
/// The features `f` writes out on this thread to fingerprint them.
|
|
fn written(f: impl FnOnce()) -> usize {
|
|
WRITTEN.with(|c| c.set(0));
|
|
f();
|
|
WRITTEN.with(Cell::get)
|
|
}
|
|
|
|
/// A search on this thread through all of a design's features for one.
|
|
pub(crate) fn count_feature_search() {
|
|
count(|c| c.feature_searches += 1);
|
|
}
|
|
|
|
/// The searches `f` makes on this thread through all features or all bodies.
|
|
fn searched(f: impl FnOnce()) -> usize {
|
|
let n = counted(f);
|
|
n.feature_searches + n.body_searches
|
|
}
|
|
|
|
/// The work `f` does on this thread.
|
|
fn counted(f: impl FnOnce()) -> Counts {
|
|
COUNTS.with(|c| c.set(Counts::default()));
|
|
f();
|
|
COUNTS.with(Cell::get)
|
|
}
|
|
|
|
#[test]
|
|
fn joint_face_measurements_are_shared_across_motion_samples_and_snap_kinds() {
|
|
use crate::joints::{Joint, JointKind, JointOrigin, Snap, XRef};
|
|
let mut doc = Document::new("joint face work");
|
|
let part = doc.add_component(Some("Crank"), 0).unwrap();
|
|
let occurrence = doc.occurrences.iter_mut().find(|o| o.component == part).unwrap();
|
|
occurrence.grounded = false;
|
|
let occurrence = occurrence.id;
|
|
let id = doc
|
|
.add_feature(
|
|
FeatureKind::Cylinder {
|
|
base: point_expr(Vec3::ZERO),
|
|
axis: Dir(Vec3::Z),
|
|
radius: "2".into(),
|
|
height: "10".into(),
|
|
operation: Operation::NewBody,
|
|
references: Vec::new(),
|
|
},
|
|
None,
|
|
)
|
|
.unwrap();
|
|
doc.feature_mut(id).unwrap().component = part;
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let state = model.state();
|
|
let pick = Vec3::new(0.0, 0.0, 10.0);
|
|
let face = joints::face_name_at(&doc, &state, part, pick, false).unwrap();
|
|
doc.assembly.joints.push(Joint {
|
|
id: 100,
|
|
name: "Pivot".into(),
|
|
kind: JointKind::Revolute,
|
|
a: JointOrigin { occurrence: 0, snap: Snap::Frame { origin: pick, z: Vec3::Z, x: Some(Vec3::X) } },
|
|
b: JointOrigin { occurrence, snap: Snap::FaceCenter { pick, face: None, x: Some(XRef::Dir(Vec3::X)) } },
|
|
values: vec![0.0],
|
|
limits: Vec::new(),
|
|
flip: true,
|
|
offset: 0.0,
|
|
angle: 0.0,
|
|
suppressed: false,
|
|
exprs: Default::default(),
|
|
});
|
|
// One body supplies both old nearest-face snaps and persistent named-face snaps.
|
|
// A scratch model shares its measurements, even though each sample changes the pose.
|
|
let snapshot = model.clone();
|
|
let work = counted(|| {
|
|
for name in [None, Some(face)] {
|
|
doc.assembly.joints[0].b.snap = Snap::FaceCenter { pick, face: name, x: Some(XRef::Dir(Vec3::X)) };
|
|
for k in 0..145 {
|
|
let angle = (k as f64 * 2.5).to_radians();
|
|
doc.assembly.joints[0].values[0] = angle;
|
|
let solution = joints::solve(&doc, &snapshot.state());
|
|
assert!(solution.errors.is_empty() && solution.conflicts.is_empty(), "{solution:?}");
|
|
let point = apply_point(&solution.world[&occurrence], Vec3::new(5.0, 0.0, 10.0));
|
|
assert!(point.dist(Vec3::new(5.0 * angle.cos(), 5.0 * angle.sin(), 10.0)) < 1e-9);
|
|
doc.apply_joint_solution(&solution);
|
|
}
|
|
}
|
|
});
|
|
assert_eq!(work.joint_faces, 1, "pose-only samples must not remeasure unchanged faces: {work:?}");
|
|
|
|
// Editing geometry creates a fresh measurement without changing a retained snapshot.
|
|
let FeatureKind::Cylinder { height, .. } = &mut doc.feature_mut(id).unwrap().kind else { panic!("cylinder") };
|
|
*height = "12".into();
|
|
model.evaluate(&doc);
|
|
let origin = &doc.assembly.joints[0].b;
|
|
let work = counted(|| {
|
|
let changed = joints::resolve_origin(&doc, &model.state(), origin).unwrap();
|
|
let retained = joints::resolve_origin(&doc, &snapshot.state(), origin).unwrap();
|
|
assert!((changed[3][2] - 12.0).abs() < 1e-9);
|
|
assert!((retained[3][2] - 10.0).abs() < 1e-9);
|
|
});
|
|
assert_eq!(work.joint_faces, 1, "only the edited body must be measured: {work:?}");
|
|
}
|
|
|
|
#[test]
|
|
fn joint_face_measurements_never_follow_a_replaced_body_or_stale_offset() {
|
|
use crate::joints::{JointOrigin, Snap};
|
|
let mut doc = Document::new("replaced joint geometry");
|
|
let mut state = ModelState::default();
|
|
state.bodies.push(ModelBody::new("Pin".into(), kernel::cylinder(Vec3::ZERO, Vec3::Z, 2.0, 10.0).unwrap(), 0));
|
|
let origin = JointOrigin { occurrence: 0, snap: Snap::FaceCenter { pick: Vec3::new(0.0, 0.0, 10.0), face: None, x: None } };
|
|
let work = counted(|| {
|
|
joints::resolve_origin(&doc, &state, &origin).unwrap();
|
|
});
|
|
assert_eq!(work.joint_faces, 1);
|
|
let retained = state.clone();
|
|
// Body is public; a clone's old measurement must never mask a direct replacement.
|
|
state.bodies[0].body = kernel::cylinder(Vec3::ZERO, Vec3::Z, 2.0, 12.0).unwrap();
|
|
let changed = joints::resolve_origin(&doc, &state, &origin).unwrap();
|
|
assert!((changed[3][2] - 12.0).abs() < 1e-9);
|
|
let work = counted(|| {
|
|
let old = joints::resolve_origin(&doc, &retained, &origin).unwrap();
|
|
assert!((old[3][2] - 10.0).abs() < 1e-9);
|
|
doc.body_offsets.insert("Pin".into(), rigid(Vec3::new(0.0, 0.0, 1.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
let moved = joints::resolve_origin(&doc, &retained, &origin).unwrap();
|
|
assert!((moved[3][2] - 11.0).abs() < 1e-9);
|
|
});
|
|
assert_eq!(work.joint_faces, 0, "offsets are applied after the shared face measurements");
|
|
}
|
|
|
|
/// Every solve of a drag resolves its edge origins again: they share the joint faces' one
|
|
/// measurement, as a face origin does, instead of tessellating the whole body each time.
|
|
#[test]
|
|
fn an_edge_origin_measures_its_faces_once() {
|
|
use crate::joints::{JointOrigin, Snap};
|
|
let doc = Document::new("edge origin");
|
|
let mut state = ModelState::default();
|
|
state.bodies.push(ModelBody::new("Block".into(), kernel::box_solid(Vec3::ZERO, Vec3::new(10.0, 10.0, 10.0)).unwrap(), 0));
|
|
let pick = Vec3::new(5.0, 0.0, 10.0);
|
|
let origin = JointOrigin { occurrence: 0, snap: Snap::Edge { pick, edge: None, face: None, corner: None, axis: None } };
|
|
let work = counted(|| {
|
|
for _ in 0..8 {
|
|
let frame = joints::resolve_origin(&doc, &state.clone(), &origin).unwrap();
|
|
assert!(apply_point(&frame, Vec3::ZERO).dist(pick) < 1e-9);
|
|
}
|
|
});
|
|
assert_eq!(work.joint_faces, 1, "a solve must not measure the faces again: {work:?}");
|
|
}
|
|
|
|
/// `parts` imported files of two boxes each, every one in its own component placed away from
|
|
/// the origin (as inserted parts are).
|
|
fn placed_imports(parts: usize) -> Document {
|
|
let mut doc = Document::new("placed imports");
|
|
for i in 0..parts {
|
|
let x = 30.0 * i as f64;
|
|
let a = kernel::box_solid(Vec3::new(x, 0.0, 0.0), Vec3::new(x + 10.0, 10.0, 10.0)).unwrap();
|
|
let b = kernel::box_solid(Vec3::new(x, 20.0, 0.0), Vec3::new(x + 5.0, 25.0, 5.0)).unwrap();
|
|
let step: Arc<str> = kernel::step_export(&[&a, &b], "test").unwrap().into();
|
|
let comp = doc.add_component(Some(&format!("Part {i}")), 0).unwrap();
|
|
let o = doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap();
|
|
o.transform = rigid(Vec3::new(0.0, 0.0, 5.0 * i as f64), Vec3::ZERO, Vec3::Z, 0.05 * i as f64);
|
|
let kind = FeatureKind::Import { file: format!("part{i}.step"), step, components: Vec::new(), skip: Vec::new() };
|
|
let id = doc.add_feature(kind, Some(&format!("Part {i}"))).unwrap();
|
|
doc.feature_mut(id).unwrap().component = comp;
|
|
}
|
|
doc
|
|
}
|
|
|
|
fn line_sketch(plane: PlaneRef, to: Vec2) -> FeatureKind {
|
|
let mut sk = Sketch::new();
|
|
let a = sk.add_point(Vec2::new(0.0, 0.0), None).unwrap();
|
|
let b = sk.add_point(to, None).unwrap();
|
|
sk.add_line_pts(a, b, None).unwrap();
|
|
FeatureKind::Sketch { plane, sketch: sk }
|
|
}
|
|
|
|
#[test]
|
|
fn a_sketch_on_a_fixed_plane_costs_the_same_in_a_large_placed_design() {
|
|
let parts = 12;
|
|
let mut doc = placed_imports(parts);
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
assert!(model.results.iter().all(|r| r.error.is_none()), "{:?}", model.results.iter().find(|r| r.error.is_some()));
|
|
assert_eq!(model.state().bodies.len(), parts * 2);
|
|
|
|
// A construction plane, then sketches on the origin planes, on an offset of one and on the
|
|
// construction plane, as commands make them one after another: no body is moved and no
|
|
// file digested again.
|
|
let plane = doc.add_feature(FeatureKind::ConstructionPlane { plane: PlaneRef::Origin { name: "XZ".into() } }, Some("Datum")).unwrap();
|
|
assert_eq!(counted(|| model.evaluate(&doc)), Counts::default(), "construction plane");
|
|
assert!(model.result(plane).unwrap().error.is_none());
|
|
let planes = [
|
|
PlaneRef::Origin { name: "XY".into() },
|
|
PlaneRef::Offset { base: Box::new(PlaneRef::Origin { name: "YZ".into() }), distance: "5 mm".into() },
|
|
PlaneRef::Construction { feature: plane.into() },
|
|
];
|
|
for (k, plane) in planes.into_iter().enumerate() {
|
|
let id = doc.add_feature(line_sketch(plane, Vec2::new(10.0, 1.0 + k as f64)), None).unwrap();
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(work, Counts::default(), "sketch {k}");
|
|
assert_eq!(model.last_recomputed, 1);
|
|
let r = model.result(id).unwrap();
|
|
assert!(r.error.is_none(), "{:?}", r.error);
|
|
assert_eq!(model.state().bodies.len(), parts * 2);
|
|
// Editing the sketch again recomputes it alone, for the same cost.
|
|
if let Ok(sk) = doc.sketch_mut(id)
|
|
&& let Some(p) = sk.points.get_mut(1)
|
|
{
|
|
p.pos = Vec2::new(12.0, 2.0);
|
|
}
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(work, Counts::default(), "sketch {k} edited");
|
|
assert_eq!(model.last_recomputed, 1);
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
fn a_sketch_on_a_face_still_sees_the_placed_bodies() {
|
|
let parts = 3;
|
|
let mut doc = placed_imports(parts);
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
// A face pick reads the model as the sketch's component sees it: the other components'
|
|
// bodies are moved into its frame, as before.
|
|
let top = Plane::new(Vec3::new(0.0, 0.0, 10.0), Vec3::X, Vec3::Y).unwrap();
|
|
let face = PlaneRef::Face { plane: top, at: Vec3::new(5.0, 5.0, 10.0), name: None, anchor: None };
|
|
doc.add_feature(line_sketch(face, Vec2::new(3.0, 3.0)), None).unwrap();
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert!(work.moved >= parts * 2 - 2, "{work:?}");
|
|
assert_eq!(work.digested, 0);
|
|
}
|
|
|
|
/// A sketch on a face of a plate placed turned (its own frame, so the plate is moved into it),
|
|
/// evaluated once: the design, its model, the plate's component, the sketch, its anchor and the
|
|
/// face picked.
|
|
fn sketch_on_a_turned_occurrence() -> (Document, Model, u64, u64, FaceAnchor, Plane) {
|
|
use solidcraft_sketch::{LinkKind, LinkSource};
|
|
|
|
let mut doc = Document::new("turned face");
|
|
let comp = doc.add_component(Some("Plate"), 0).unwrap();
|
|
let occurrence = doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap();
|
|
occurrence.transform = rigid(Vec3::ZERO, Vec3::ZERO, Vec3::X, std::f64::consts::FRAC_PI_2);
|
|
let path = vec![occurrence.id];
|
|
let kind = serde_json::from_value(serde_json::json!({
|
|
"type": "box", "corner": [0, 0, 0], "length": "90", "width": "120", "height": "8"
|
|
}))
|
|
.unwrap();
|
|
let plate = doc.add_feature(kind, Some("Plate")).unwrap();
|
|
doc.feature_mut(plate).unwrap().component = comp;
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let state = model.state();
|
|
let raw = state.bodies.first().unwrap();
|
|
let index = raw.body.face_sources().unwrap().iter().position(|s| matches!(s, Some(kernel::FaceSource::Box { axis: 2, high: true, .. }))).unwrap();
|
|
let world = world_state(&doc, &state);
|
|
let shown = world.bodies.first().unwrap();
|
|
let picked = shown.body.face_plane(index).unwrap();
|
|
let anchor = doc.capture_face_anchor(raw, index, &picked, &path, 0, &[]).unwrap();
|
|
let source = LinkSource::Face { body: raw.name.clone(), at: apply_point(&doc.component_transform(comp), Vec3::new(30., 60., 8.)) };
|
|
let resolved = crate::project::resolve(&doc, &BTreeMap::new(), &world, &picked, LinkKind::Project, &source).unwrap();
|
|
let plane = PlaneRef::Face { plane: picked, at: picked.origin, name: None, anchor: Some(Box::new(anchor.clone())) };
|
|
let mut sketch = Sketch::new();
|
|
let a = sketch.add_point(Vec2::ZERO, None).unwrap();
|
|
let b = sketch.add_point(Vec2::new(3., 3.), None).unwrap();
|
|
sketch.add_line_pts(a, b, None).unwrap();
|
|
sketch.add_link(LinkKind::Project, source, &resolved.geom).unwrap();
|
|
let id = doc.add_feature(FeatureKind::Sketch { plane, sketch }, None).unwrap();
|
|
doc.feature_mut(id).unwrap().component = 0;
|
|
let first = counted(|| model.evaluate(&doc));
|
|
assert!(first.moved > 0, "{first:?}");
|
|
assert!(model.result(id).unwrap().error.is_none(), "{:?}", model.result(id).unwrap().error);
|
|
(doc, model, comp, id, anchor, picked)
|
|
}
|
|
|
|
#[test]
|
|
fn editing_a_sketch_on_a_turned_occurrence_reuses_its_frame_bodies() {
|
|
let (mut doc, model, comp, id, anchor, picked) = sketch_on_a_turned_occurrence();
|
|
let reopened = Model::adopt(&doc, &model.saved(&doc).unwrap()).unwrap();
|
|
for mut model in [model, reopened] {
|
|
let before = state_in_face_anchor_frame(&doc, &model.state_before(id), &anchor, 0).unwrap().bodies.first().unwrap().mesh();
|
|
|
|
for to in [Vec2::new(4., 5.), Vec2::new(6., 7.)] {
|
|
doc.sketch_mut(id).unwrap().points.get_mut(1).unwrap().pos = to;
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(work.moved, 0, "sketch edit must reuse the unchanged placement: {work:?}");
|
|
assert_eq!(model.last_recomputed, 1);
|
|
let result = model.result(id).unwrap();
|
|
assert!(result.error.is_none(), "{:?}", result.error);
|
|
let solved = model.state();
|
|
let solved = solved.sketch(id).unwrap();
|
|
assert!(solved.sketch.links.iter().all(|link| !link.lost));
|
|
assert!((solved.plane.normal().dot(picked.normal()) - 1.).abs() < 1e-9);
|
|
let after = state_in_face_anchor_frame(&doc, &model.state_before(id), &anchor, 0).unwrap().bodies.first().unwrap().mesh();
|
|
assert!(Arc::ptr_eq(&before, &after), "the anchored body's mesh must survive sketch edits");
|
|
}
|
|
// A changed placement is a different frame: the body is moved again, not reused.
|
|
let turned = doc.occurrences.iter().find(|o| o.component == comp).unwrap().transform;
|
|
doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap().transform =
|
|
rigid(Vec3::ZERO, Vec3::ZERO, Vec3::X, std::f64::consts::FRAC_PI_3);
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert!(work.moved > 0, "a changed placement must move the body again: {work:?}");
|
|
doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap().transform = turned;
|
|
model.evaluate(&doc);
|
|
}
|
|
}
|
|
|
|
/// Evaluations between two edits of the sketch that move nothing (a delete refreshes the model
|
|
/// more than once, an undo can take its sketch from the cache) leave its frame bodies in place:
|
|
/// they once aged them out, and the next edit moved and meshed every placed body again, which
|
|
/// in a design of thousands of imported bodies took a minute per edit.
|
|
#[test]
|
|
fn evaluations_that_move_nothing_keep_the_frame_bodies() {
|
|
let (mut doc, mut model, _, id, _, _) = sketch_on_a_turned_occurrence();
|
|
let edit = |doc: &mut Document, to: Vec2| doc.sketch_mut(id).unwrap().points.get_mut(1).unwrap().pos = to;
|
|
edit(&mut doc, Vec2::new(4., 5.));
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(work.moved, 0, "{work:?}");
|
|
for _ in 0..3 {
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!((work.moved, model.last_recomputed), (0, 0), "{work:?}");
|
|
}
|
|
edit(&mut doc, Vec2::new(6., 7.));
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(model.last_recomputed, 1);
|
|
assert_eq!(work.moved, 0, "the edit after idle evaluations must reuse the moved plate: {work:?}");
|
|
}
|
|
|
|
#[test]
|
|
fn an_imported_file_is_fingerprinted_by_its_text() {
|
|
let doc = placed_imports(2);
|
|
let mut model = Model::new();
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(work.digested, 2);
|
|
let fingerprints = |m: &Model| m.results.iter().map(|r| r.fingerprint).collect::<Vec<_>>();
|
|
let before = fingerprints(&model);
|
|
|
|
// The same text held by another copy (an undo state, a design opened again): the same
|
|
// fingerprints, and nothing evaluated again.
|
|
let mut copy = doc.clone();
|
|
for f in &mut copy.features {
|
|
if let FeatureKind::Import { step, .. } = &mut f.kind {
|
|
*step = Arc::from(step.to_string());
|
|
}
|
|
}
|
|
let work = counted(|| model.evaluate(©));
|
|
assert_eq!(work.digested, 2);
|
|
assert_eq!(fingerprints(&model), before);
|
|
assert_eq!(model.last_recomputed, 0);
|
|
|
|
// Other text: that feature and the ones after it are evaluated again.
|
|
let other = kernel::box_solid(Vec3::ZERO, Vec3::new(4.0, 4.0, 4.0)).unwrap();
|
|
let text: Arc<str> = kernel::step_export(&[&other], "test").unwrap().into();
|
|
if let Some(FeatureKind::Import { step, .. }) = copy.features.last_mut().map(|f| &mut f.kind) {
|
|
*step = text;
|
|
}
|
|
let work = counted(|| model.evaluate(©));
|
|
assert_eq!(work.digested, 1);
|
|
let after = fingerprints(&model);
|
|
assert_eq!(after.first(), before.first());
|
|
assert_ne!(after.last(), before.last());
|
|
assert_eq!(model.last_recomputed, 1);
|
|
assert_eq!(model.state().bodies.len(), 3);
|
|
}
|
|
|
|
/// Pinning body names fingerprints the timeline again only from the first renamed feature on
|
|
/// (`Model::pinned_prefix`), and gives the fingerprints the full pass gives: random pins
|
|
/// on a timeline of boxes, cuts, patterns of features (one placed before its source, as one made
|
|
/// with the timeline rolled back is), a suppressed feature and a history marker, after an
|
|
/// evaluation and after earlier pins.
|
|
#[test]
|
|
fn pinning_body_names_fingerprints_as_the_full_pass_does() {
|
|
let kind = |v: serde_json::Value| serde_json::from_value::<FeatureKind>(v).unwrap();
|
|
let mut doc = Document::new("pins");
|
|
let mut ids = Vec::new();
|
|
for i in 0..10 {
|
|
let x = 20.0 * i as f64;
|
|
let b =
|
|
kind(serde_json::json!({"type": "box", "corner": [x, 0.0, 0.0], "length": "10", "width": "10", "height": "10", "operation": "new_body"}));
|
|
ids.push(doc.add_feature(b, None).unwrap());
|
|
if i % 3 == 1 {
|
|
let c = kind(
|
|
serde_json::json!({"type": "cylinder", "axis": [0.0, 0.0, 1.0], "base": [x + 5.0, 5.0, -1.0], "height": "12", "radius": "2", "operation": "cut"}),
|
|
);
|
|
ids.push(doc.add_feature(c, None).unwrap());
|
|
}
|
|
}
|
|
let circular = |features: Vec<u64>| {
|
|
kind(serde_json::json!({"type": "pattern", "features": features, "bodies": [],
|
|
"pattern": {"type": "circular", "angle": "360 deg", "axis": [0.0, 0.0, 1.0], "count": "3", "origin": [0.0, -40.0, 0.0]}}))
|
|
};
|
|
ids.push(doc.add_feature(circular(vec![ids[2]]), None).unwrap());
|
|
// A pattern of a later feature, placed early in the timeline.
|
|
let early = doc.add_feature(circular(vec![ids[9]]), None).unwrap();
|
|
let at = doc.features.iter().position(|f| f.id == early).unwrap();
|
|
let f = doc.features.remove(at);
|
|
doc.features.insert(3, f);
|
|
ids.push(early);
|
|
doc.feature_mut(ids[5]).unwrap().suppressed = true;
|
|
|
|
let mut seed = 0x2545_f491_4f6c_dd1du64;
|
|
let mut next = |n: usize| {
|
|
seed ^= seed << 13;
|
|
seed ^= seed >> 7;
|
|
seed ^= seed << 17;
|
|
(seed % n as u64) as usize
|
|
};
|
|
let fps = |m: &Model| m.results.iter().map(|r| (r.id, r.fingerprint)).collect::<Vec<_>>();
|
|
let mut old = Arc::new(doc);
|
|
let mut model = Model::new();
|
|
model.evaluate_shared(&old);
|
|
let (mut proven, mut kept) = (0, 0);
|
|
for round in 0..60 {
|
|
if round % 20 == 10 {
|
|
// From an evaluation's fingerprints again, with the marker in some rounds.
|
|
let mut d = (*old).clone();
|
|
d.marker = (round == 30).then_some(d.features.len() - 2);
|
|
old = Arc::new(d);
|
|
model.evaluate_shared(&old);
|
|
}
|
|
let mut new = (*old).clone();
|
|
let mut renamed = Vec::new();
|
|
for _ in 0..1 + next(3) {
|
|
let f = &mut new.features[next(old.features.len())];
|
|
let slot = next(3);
|
|
f.body_names.resize(f.body_names.len().max(slot + 1), String::new());
|
|
f.body_names[slot] = format!("Pinned {round} {slot}");
|
|
renamed.push(f.id);
|
|
}
|
|
new.reserved_body_names.insert(format!("Body{}", 100 + round));
|
|
let new = Arc::new(new);
|
|
let start = model.pinned_prefix(&old, &renamed);
|
|
let first = new.features.iter().position(|f| renamed.contains(&f.id)).unwrap();
|
|
assert!(start <= first, "round {round}: kept {start} past the first renamed feature {first}");
|
|
proven += usize::from(start > 0);
|
|
kept += start;
|
|
let mut partial = model.clone();
|
|
partial.refingerprint_shared(&new, start);
|
|
let mut full = model.clone();
|
|
full.refingerprint_shared(&new, 0);
|
|
assert_eq!(fps(&partial), fps(&full), "round {round}");
|
|
assert_ne!(fps(&partial), fps(&model), "round {round}: the names are fingerprinted");
|
|
// The pinned fingerprints prove themselves for the next pin, as the full pass's do.
|
|
assert_eq!(partial.fingerprinted.as_ref().map(|(_, d)| *d), full.fingerprinted.as_ref().map(|(_, d)| *d));
|
|
model = partial;
|
|
old = new;
|
|
}
|
|
assert!(proven > 40 && kept > 0, "the stored fingerprints were reused: {proven} rounds, {kept} results");
|
|
|
|
// No proof, no reuse: results changed since, another design, or the design about to change
|
|
// in place.
|
|
let last = [*ids.last().unwrap()];
|
|
assert!(model.pinned_prefix(&old, &last) > 0);
|
|
let mut changed = model.clone();
|
|
changed.results[0].fingerprint ^= 1;
|
|
assert_eq!(changed.pinned_prefix(&old, &last), 0);
|
|
assert_eq!(model.pinned_prefix(&Arc::new((*old).clone()), &last), 0);
|
|
let mut forgot = model.clone();
|
|
forgot.forget_fingerprints();
|
|
assert_eq!(forgot.pinned_prefix(&old, &last), 0);
|
|
}
|
|
|
|
/// A design evaluated ahead, on a worker thread of its own, fingerprints its features from the
|
|
/// texts the window's evaluation wrote: none is written out again there (the store was per
|
|
/// thread, and every ahead run started it empty), and the fingerprints are the same.
|
|
#[test]
|
|
fn an_evaluation_on_another_thread_reuses_the_written_features() {
|
|
let mut doc = Document::new("ahead");
|
|
// Ids no other test's design uses: the store is shared by the tests running beside this one.
|
|
doc.next_id = 0x0007_e57a_4ead_0000;
|
|
for i in 0..40 {
|
|
let x = 20.0 * i as f64;
|
|
let b = serde_json::json!({"type": "box", "corner": [x, 0.0, 0.0], "length": "10", "width": "10", "height": "10", "operation": "new_body"});
|
|
doc.add_feature(serde_json::from_value(b).unwrap(), None).unwrap();
|
|
}
|
|
let mut window = Model::new();
|
|
let first = written(|| window.evaluate(&doc));
|
|
assert!(first >= doc.features.len(), "{first} written");
|
|
let fps = |m: &Model| m.results.iter().map(|r| r.fingerprint).collect::<Vec<_>>();
|
|
let (doc2, mut ahead) = (doc.clone(), window.clone());
|
|
ahead.no_cache = true;
|
|
let (work, ahead_fps) = std::thread::spawn(move || {
|
|
let work = written(|| ahead.evaluate(&doc2));
|
|
(work, fps(&ahead))
|
|
})
|
|
.join()
|
|
.unwrap();
|
|
assert_eq!(work, 0, "features written out again");
|
|
assert_eq!(ahead_fps, fps(&window));
|
|
}
|
|
|
|
/// A 10 mm square plate per hole along X, 4 mm thick, in component `comp`, with `holes` square
|
|
/// holes cut through it by boxes drawn in component `tools` (the plate's own, usually). The
|
|
/// plate's body name.
|
|
fn plate_with_holes(doc: &mut Document, comp: u64, tools: u64, holes: usize) -> String {
|
|
let length = format!("{}", 10 * holes.max(1));
|
|
let kind = FeatureKind::Box {
|
|
corner: point_expr(Vec3::ZERO),
|
|
length: length.into(),
|
|
width: "10".into(),
|
|
height: "4".into(),
|
|
operation: Operation::NewBody,
|
|
};
|
|
let plate = doc.add_feature(kind, None).unwrap();
|
|
doc.feature_mut(plate).unwrap().component = comp;
|
|
let mut model = Model::new();
|
|
model.evaluate(doc);
|
|
let body = model.state().bodies.iter().find(|b| b.feature == plate).unwrap().name.clone();
|
|
for k in 0..holes {
|
|
let corner = point_expr(Vec3::new(10.0 * k as f64 + 4.0, 4.0, -1.0));
|
|
let kind = FeatureKind::Box { corner, length: "2".into(), width: "2".into(), height: "6".into(), operation: Operation::Cut };
|
|
let id = doc.add_feature(kind, None).unwrap();
|
|
let f = doc.feature_mut(id).unwrap();
|
|
f.component = tools;
|
|
f.participants = vec![body.clone()];
|
|
}
|
|
body
|
|
}
|
|
|
|
fn place(doc: &mut Document, comp: u64, m: Mat) {
|
|
doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap().transform = m;
|
|
}
|
|
|
|
fn volume(model: &Model, body: &str) -> f64 {
|
|
kernel::measure(&model.state().body(body).unwrap().body).unwrap().volume
|
|
}
|
|
|
|
#[test]
|
|
fn turning_a_joint_between_parts_cuts_no_hole_again() {
|
|
let mut doc = Document::new("two parts");
|
|
let base = doc.add_component(Some("Base"), 0).unwrap();
|
|
let arm = doc.add_component(Some("Arm"), 0).unwrap();
|
|
let base_plate = plate_with_holes(&mut doc, base, base, 3);
|
|
let arm_plate = plate_with_holes(&mut doc, arm, arm, 3);
|
|
place(&mut doc, arm, rigid(Vec3::new(0.0, 0.0, 10.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
assert!(model.results.iter().all(|r| r.error.is_none()), "{:?}", model.results.iter().find(|r| r.error.is_some()));
|
|
assert!((volume(&model, &base_plate) - (1200.0 - 3.0 * 16.0)).abs() < 1e-6);
|
|
// Turning the arm (as a revolute joint does) moves it and nothing else: each part's holes
|
|
// stay cut in its own frame, so no hole is cut again.
|
|
for step in 1..=3 {
|
|
place(&mut doc, arm, rigid(Vec3::new(0.0, 0.0, 10.0), Vec3::ZERO, Vec3::Z, 0.3 * f64::from(step)));
|
|
model.evaluate(&doc);
|
|
assert_eq!(model.last_recomputed, 0, "step {step}");
|
|
assert!((volume(&model, &arm_plate) - (1200.0 - 3.0 * 16.0)).abs() < 1e-6);
|
|
}
|
|
// Moving both parts together changes nothing between them either.
|
|
for comp in [base, arm] {
|
|
place(&mut doc, comp, rigid(Vec3::new(5.0, 0.0, 0.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
}
|
|
model.evaluate(&doc);
|
|
assert_eq!(model.last_recomputed, 0);
|
|
}
|
|
|
|
#[test]
|
|
fn a_tool_cutting_another_part_cuts_again_when_that_part_moves() {
|
|
let mut doc = Document::new("cross part");
|
|
let tools = doc.add_component(Some("Tools"), 0).unwrap();
|
|
let plate = doc.add_component(Some("Plate"), 0).unwrap();
|
|
let other = doc.add_component(Some("Other"), 0).unwrap();
|
|
// The other part first, so the cut across parts is the last feature: it alone is evaluated
|
|
// again when it changes.
|
|
plate_with_holes(&mut doc, other, other, 1);
|
|
let body = plate_with_holes(&mut doc, plate, tools, 1);
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
assert!(model.results.iter().all(|r| r.error.is_none()), "{:?}", model.results.iter().find(|r| r.error.is_some()));
|
|
assert!((volume(&model, &body) - (400.0 - 16.0)).abs() < 1e-6);
|
|
// An unrelated part moving: the cut keeps its result.
|
|
place(&mut doc, other, rigid(Vec3::new(0.0, 40.0, 0.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
model.evaluate(&doc);
|
|
assert_eq!(model.last_recomputed, 0);
|
|
// The plate moving away from the tool by 5 mm: the hole is cut again where the tool now meets
|
|
// it, half of it on the plate.
|
|
place(&mut doc, plate, rigid(Vec3::new(5.0, 0.0, 0.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
model.evaluate(&doc);
|
|
assert_eq!(model.last_recomputed, 1);
|
|
assert!((volume(&model, &body) - (400.0 - 8.0)).abs() < 1e-6, "{}", volume(&model, &body));
|
|
// The tool's part following it: the hole is where it was at first, the first result again.
|
|
place(&mut doc, tools, rigid(Vec3::new(5.0, 0.0, 0.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
model.evaluate(&doc);
|
|
assert_eq!(model.last_recomputed, 0);
|
|
assert!((volume(&model, &body) - (400.0 - 16.0)).abs() < 1e-6, "{}", volume(&model, &body));
|
|
}
|
|
|
|
#[test]
|
|
fn a_body_is_measured_once_while_it_stays_the_same() {
|
|
let mut doc = Document::new("measured once");
|
|
let cylinder = |doc: &mut Document, x: f64| {
|
|
let kind = FeatureKind::Cylinder {
|
|
base: point_expr(Vec3::new(x, 0.0, 0.0)),
|
|
axis: Dir(Vec3::Z),
|
|
radius: "2".into(),
|
|
height: "10".into(),
|
|
operation: Operation::NewBody,
|
|
references: Vec::new(),
|
|
};
|
|
doc.add_feature(kind, None).unwrap();
|
|
};
|
|
cylinder(&mut doc, 0.0);
|
|
cylinder(&mut doc, 10.0);
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let measure_all = |st: &ModelState| {
|
|
for b in &st.bodies {
|
|
b.measure().unwrap();
|
|
}
|
|
};
|
|
let first = model.state();
|
|
assert_eq!(counted(|| measure_all(&first)).measures, 2);
|
|
assert_eq!(counted(|| measure_all(&first)).measures, 0, "measured again");
|
|
// A feature added: only its body is new.
|
|
cylinder(&mut doc, 20.0);
|
|
model.evaluate(&doc);
|
|
let st = model.state();
|
|
assert_eq!(counted(|| measure_all(&st)).measures, 1);
|
|
// A body replaced in its holder is measured as it is now; the others keep theirs.
|
|
let mut replaced = st.bodies[0].clone();
|
|
replaced.body = kernel::box_solid(Vec3::ZERO, Vec3::new(1.0, 2.0, 3.0)).unwrap();
|
|
assert!((replaced.measure().unwrap().volume - 6.0).abs() < 1e-9);
|
|
assert!((st.bodies[0].measure().unwrap().volume - first.bodies[0].measure().unwrap().volume).abs() < 1e-12);
|
|
}
|
|
|
|
#[test]
|
|
fn placed_bodies_taken_as_before_keep_their_measure() {
|
|
let mut doc = Document::new("placed measure");
|
|
let component = doc.add_component(Some("Part"), 0).unwrap();
|
|
doc.body_components.insert("Pin".into(), component);
|
|
doc.occurrences[0].transform = rigid(Vec3::new(10.0, 0.0, 0.0), Vec3::ZERO, Vec3::Y, 0.3);
|
|
let mut state = ModelState::default();
|
|
state.bodies.push(ModelBody::new("Pin".into(), kernel::cylinder(Vec3::ZERO, Vec3::Z, 2.0, 8.0).unwrap(), 1));
|
|
let mut cache = PlacedBodies::default();
|
|
let before = world_state_reusing(&doc, &state, &mut cache);
|
|
let centroid = before.bodies[0].measure().unwrap().centroid;
|
|
let again = world_state_reusing(&doc, &state, &mut cache);
|
|
assert_eq!(counted(|| assert_eq!(again.bodies[0].measure().unwrap().centroid, centroid)).measures, 0);
|
|
}
|
|
|
|
#[test]
|
|
fn shared_evaluation_requires_its_actual_model_and_unmodified_geometry_inputs() {
|
|
let mut doc = Document::new("shared evaluation");
|
|
let feature = doc
|
|
.add_feature(
|
|
FeatureKind::Box {
|
|
corner: point_expr(Vec3::ZERO),
|
|
length: "2".into(),
|
|
width: "3".into(),
|
|
height: "4".into(),
|
|
operation: Operation::NewBody,
|
|
},
|
|
None,
|
|
)
|
|
.unwrap();
|
|
let mut doc = Arc::new(doc);
|
|
let mut model = Model::new();
|
|
assert!(model.evaluate_shared(&doc));
|
|
let original = model.state();
|
|
assert!(!model.evaluate_shared(&doc));
|
|
assert_eq!(model.last_recomputed, 0);
|
|
assert!(Arc::ptr_eq(&original, &model.state()));
|
|
|
|
// A geometry edit must be seen even when a caller did not evaluate it before moving.
|
|
let FeatureKind::Box { length, .. } = &mut Arc::make_mut(&mut doc).feature_mut(feature).unwrap().kind else { panic!("box") };
|
|
*length = "5".into();
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!((model.state().bodies[0].measure().unwrap().volume - 60.).abs() < 1e-8);
|
|
assert!((original.bodies[0].measure().unwrap().volume - 24.).abs() < 1e-8);
|
|
assert!(!model.evaluate_shared(&doc));
|
|
|
|
let mut other_doc = (*doc).clone();
|
|
let FeatureKind::Box { length, .. } = &mut other_doc.feature_mut(feature).unwrap().kind else { panic!("box") };
|
|
*length = "7".into();
|
|
let mut other = Model::new();
|
|
other.evaluate(&other_doc);
|
|
model.results = other.results;
|
|
assert!(model.evaluate_shared(&doc), "replaced results cannot use the retained proof");
|
|
assert_eq!(model.state().bodies.len(), 1);
|
|
model.no_cache = true;
|
|
assert!(model.evaluate_shared(&doc));
|
|
model.no_cache = false;
|
|
assert!(model.evaluate_shared(&doc));
|
|
let ahead = model.clone();
|
|
model.prime(&ahead);
|
|
assert!(model.evaluate_shared(&doc), "primed results use normal evaluation");
|
|
model.unprime();
|
|
assert!(model.evaluate_shared(&doc));
|
|
model.evaluate(&doc);
|
|
assert!(model.evaluate_shared(&doc), "the borrowed-document API invalidates the shared-input proof");
|
|
Arc::make_mut(&mut doc).set_param("Width", "6 mm", None, None).unwrap();
|
|
let FeatureKind::Box { width, .. } = &mut Arc::make_mut(&mut doc).feature_mut(feature).unwrap().kind else { panic!("box") };
|
|
*width = "Width".into();
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!((model.state().bodies[0].measure().unwrap().volume - 120.).abs() < 1e-8);
|
|
Arc::make_mut(&mut doc).set_param("Width", "9 mm", None, None).unwrap();
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!((model.state().bodies[0].measure().unwrap().volume - 180.).abs() < 1e-8);
|
|
// A primitive's label can change its result without replacing the geometry state.
|
|
// Restoring the earlier document must restore that label and fingerprint too.
|
|
let name = doc.feature(feature).unwrap().name.clone();
|
|
let mut renamed = (*doc).clone();
|
|
renamed.feature_mut(feature).unwrap().name = "Renamed box".into();
|
|
assert!(model.rename_feature(&renamed, feature));
|
|
assert!(model.evaluate_shared(&doc), "refingerprinted results must not keep the old shared-input proof");
|
|
assert_eq!(model.result(feature).unwrap().name, name);
|
|
assert!(model.is_current(&doc));
|
|
}
|
|
|
|
#[test]
|
|
fn shared_imported_mesh_inputs_keep_payload_identity_and_invalidate_replacements() {
|
|
let mut doc = Document::new("shared mesh input");
|
|
let component = doc.add_component(Some("Part"), 0).unwrap();
|
|
let feature = doc
|
|
.add_feature(
|
|
FeatureKind::MeshImport {
|
|
file: "triangle.stl".into(),
|
|
meshes: vec![MeshData {
|
|
name: "Triangle".into(),
|
|
positions: Arc::from([0., 0., 0., 1., 0., 0., 0., 1., 0.]),
|
|
triangles: Arc::from([0, 1, 2]),
|
|
color: None,
|
|
}],
|
|
},
|
|
None,
|
|
)
|
|
.unwrap();
|
|
doc.feature_mut(feature).unwrap().component = component;
|
|
let mut doc = Arc::new(doc);
|
|
let mut model = Model::new();
|
|
assert!(model.evaluate_shared(&doc));
|
|
let original = model.state();
|
|
Arc::make_mut(&mut doc).occurrences[0].transform = rigid(Vec3::new(10., 0., 0.), Vec3::ZERO, Vec3::Z, 0.3);
|
|
assert!(!model.evaluate_shared(&doc));
|
|
assert!(Arc::ptr_eq(&original, &model.state()));
|
|
for edit in 0..5 {
|
|
let FeatureKind::MeshImport { meshes, .. } = &mut Arc::make_mut(&mut doc).feature_mut(feature).unwrap().kind else { panic!("mesh") };
|
|
let mesh = &mut meshes[0];
|
|
match edit {
|
|
0 => Arc::make_mut(&mut mesh.positions)[3] = 2.,
|
|
1 => Arc::make_mut(&mut mesh.triangles).swap(1, 2),
|
|
2 => mesh.color = Some([0.2, 0.4, 0.6]),
|
|
3 => mesh.name = "Renamed".into(),
|
|
_ => mesh.positions = Arc::from(mesh.positions.to_vec()),
|
|
}
|
|
assert!(model.evaluate_shared(&doc), "mesh edit {edit} must invalidate");
|
|
assert!(model.results.iter().all(|r| r.error.is_none()));
|
|
let mut fresh = Model::new();
|
|
fresh.no_cache = true;
|
|
fresh.evaluate(&doc);
|
|
let (actual, expected) = (model.state(), fresh.state());
|
|
assert_eq!(actual.bodies[0].name, expected.bodies[0].name);
|
|
let (actual, expected) = (actual.bodies[0].mesh(), expected.bodies[0].mesh());
|
|
assert_eq!(actual.positions, expected.positions);
|
|
assert_eq!(actual.triangles, expected.triangles);
|
|
assert_eq!(actual.normals, expected.normals);
|
|
assert!(!model.evaluate_shared(&doc));
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
fn shared_evaluation_refreshes_live_sketches_and_keeps_unknown_features_conservative() {
|
|
let mut doc = Document::new("live and unknown inputs");
|
|
let feature = doc.add_feature(line_sketch(PlaneRef::Origin { name: "XY".into() }, Vec2::new(2., 1.)), None).unwrap();
|
|
let mut doc = Arc::new(doc);
|
|
let mut model = Model::new();
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!(!model.evaluate_shared(&doc));
|
|
let solved = model.state().sketch(feature).unwrap().clone();
|
|
let mut live = solved.sketch.clone();
|
|
live.points[1].pos.y += 2.;
|
|
assert!(model.show_live_sketch(feature, live, solved.report.clone()));
|
|
assert!(model.is_stale());
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!(!model.is_stale());
|
|
assert_eq!(model.state().sketch(feature).unwrap().sketch.points, solved.sketch.points);
|
|
Arc::make_mut(&mut doc).add_feature(FeatureKind::ConstructionPlane { plane: PlaneRef::Origin { name: "XY".into() } }, None).unwrap();
|
|
assert!(model.evaluate_shared(&doc));
|
|
assert!(model.results.iter().all(|r| r.error.is_none()));
|
|
assert!(model.evaluate_shared(&doc), "an unclassified feature must keep the ordinary evaluation path");
|
|
}
|
|
|
|
/// A saved model writes each set of sketch keys once, as the keys it sets and drops relative to
|
|
/// the set written before it (every state repeating its whole set made a 5,484-feature design's
|
|
/// model too large for its file, which then kept only some states and evaluated the rest on
|
|
/// opening). Every state reads back the keys it was evaluated with, also in a model thinned to
|
|
/// fewer states; a set that names no set before it is refused.
|
|
#[test]
|
|
fn saved_states_read_back_their_sketch_keys() {
|
|
let mut doc = Document::new("Sketch keys");
|
|
for i in 0..4 {
|
|
doc.add_feature(line_sketch(PlaneRef::Origin { name: "XY".into() }, Vec2::new(f64::from(i) + 1.0, 1.0)), None).unwrap();
|
|
for j in 0..3 {
|
|
let corner = point_expr(Vec3::new(f64::from(i) * 20.0, f64::from(j) * 20.0, 0.0));
|
|
let kind = FeatureKind::Box { corner, length: "5".into(), width: "5".into(), height: "5".into(), operation: Operation::NewBody };
|
|
doc.add_feature(kind, None).unwrap();
|
|
}
|
|
}
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let keys = |m: &Model| m.results.iter().map(|r| r.state.sketch_keys.clone()).collect::<Vec<_>>();
|
|
assert_eq!(model.state().sketch_keys.len(), 4);
|
|
let saved = model.saved(&doc).unwrap();
|
|
assert_eq!(saved.records["sketch_key_sets"].as_array().unwrap().len(), 4, "one set per sketch");
|
|
assert_eq!(saved.records["states"].as_array().unwrap().len(), doc.features.len());
|
|
assert_eq!(keys(&Model::adopt(&doc, &saved).unwrap()), keys(&model));
|
|
// The final state alone (every body costs more than the budget): the sets are all kept.
|
|
let pieces: Vec<Vec<(usize, usize)>> = (0..saved.bodies.len()).map(|i| vec![(i, 1 << 20)]).collect();
|
|
let (thinned, _, _) = saved.thinned(&pieces, 0).unwrap();
|
|
assert_eq!(thinned.records["states"].as_array().unwrap().len(), 1);
|
|
assert_eq!(thinned.final_state().unwrap().sketch_keys, model.state().sketch_keys);
|
|
assert_eq!(keys(&Model::adopt(&doc, &thinned).unwrap()), keys(&model));
|
|
// Sets and drops read as written; a base that is not an earlier set is refused.
|
|
let with_sets = |sets: serde_json::Value| SavedModel {
|
|
records: {
|
|
let mut r = saved.records.clone();
|
|
r["sketch_key_sets"] = sets;
|
|
r
|
|
},
|
|
bodies: saved.bodies.clone(),
|
|
};
|
|
let first = *model.state().sketch_keys.keys().next().unwrap();
|
|
let dropped = with_sets(serde_json::json!([
|
|
{"set": [[first, "0000000000000001"], [7, "0000000000000002"]], "drop": []},
|
|
{"base": 0, "set": [], "drop": []},
|
|
{"base": 1, "set": [[8, "0000000000000003"]], "drop": [first]},
|
|
{"base": 0, "set": [[7, "00000000000000ff"]], "drop": []},
|
|
]));
|
|
let want: BTreeMap<u64, u64> = [(7, 0xff), (first, 1)].into();
|
|
assert_eq!(dropped.final_state().unwrap().sketch_keys, want);
|
|
let dropped = with_sets(serde_json::json!([
|
|
{"set": [[first, "0000000000000001"], [7, "0000000000000002"]], "drop": []},
|
|
{"base": 0, "set": [], "drop": []},
|
|
{"base": 0, "set": [], "drop": []},
|
|
{"base": 1, "set": [[8, "0000000000000003"]], "drop": [first]},
|
|
]));
|
|
assert_eq!(dropped.final_state().unwrap().sketch_keys, [(7, 2), (8, 3)].into());
|
|
for base in [3, 4] {
|
|
let sets =
|
|
serde_json::json!([{"set": [], "drop": []}, {"set": [], "drop": []}, {"set": [], "drop": []}, {"base": base, "set": [], "drop": []}]);
|
|
assert!(with_sets(sets).final_state().is_err(), "base {base}");
|
|
}
|
|
}
|
|
|
|
/// The dirty check and autosave compare the whole document after every edit; a scanned
|
|
/// part's shared triangles must not be read for that. A coordinate that equals nothing (not a
|
|
/// number) shows whether the shared arrays were read: only reading them makes a mesh differ
|
|
/// from its own copy.
|
|
#[test]
|
|
fn comparing_a_copied_mesh_does_not_read_its_shared_arrays() {
|
|
let mesh = MeshData {
|
|
name: "Scan".into(),
|
|
positions: Arc::from([0., 0., 0., 1., 0., 0., 0., 1., f64::NAN]),
|
|
triangles: Arc::from([0, 1, 2]),
|
|
color: None,
|
|
};
|
|
let copy = mesh.clone();
|
|
assert!(copy == mesh, "a copy shares the arrays and is the same mesh without reading them");
|
|
let mut renamed = mesh.clone();
|
|
renamed.name = "Other".into();
|
|
assert!(renamed != mesh);
|
|
let mut coloured = mesh.clone();
|
|
coloured.color = Some([0.2, 0.4, 0.6]);
|
|
assert!(coloured != mesh);
|
|
let unshared = MeshData { positions: Arc::from(mesh.positions.to_vec()), ..mesh.clone() };
|
|
assert!(unshared != mesh, "arrays that are not shared still compare value by value");
|
|
let finite = MeshData { positions: Arc::from([0., 0., 0., 1., 0., 0., 0., 1., 0.]), ..mesh.clone() };
|
|
let equal = MeshData { positions: Arc::from(finite.positions.to_vec()), triangles: Arc::from(finite.triangles.to_vec()), ..finite.clone() };
|
|
assert!(equal == finite, "equal values in other arrays are the same mesh");
|
|
let flipped = MeshData { triangles: Arc::from([0, 2, 1]), ..finite.clone() };
|
|
assert!(flipped != finite);
|
|
}
|
|
|
|
/// `blocks` boxes, each its own body, in component `comp`, then a cut box without targets
|
|
/// through each of the first `cuts` (it cuts every body of its component).
|
|
fn blocks_with_cuts(doc: &mut Document, comp: u64, blocks: usize, cuts: usize) {
|
|
let y = 100.0 * comp as f64;
|
|
for k in 0..blocks {
|
|
let corner = point_expr(Vec3::new(20.0 * k as f64, y, 0.0));
|
|
let kind = FeatureKind::Box { corner, length: "10".into(), width: "10".into(), height: "4".into(), operation: Operation::NewBody };
|
|
let id = doc.add_feature(kind, None).unwrap();
|
|
doc.feature_mut(id).unwrap().component = comp;
|
|
}
|
|
for k in 0..cuts {
|
|
let corner = point_expr(Vec3::new(20.0 * k as f64 + 4.0, y + 4.0, -1.0));
|
|
let kind = FeatureKind::Box { corner, length: "2".into(), width: "2".into(), height: "6".into(), operation: Operation::Cut };
|
|
let id = doc.add_feature(kind, None).unwrap();
|
|
doc.feature_mut(id).unwrap().component = comp;
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
fn an_evaluation_from_the_cache_does_not_search_the_bodies_for_each_cut() {
|
|
// Each cut reads where every body of its component is placed; looking each one up by name
|
|
// made an evaluation quadratic in the bodies, even with every feature taken from the cache.
|
|
let searches = |blocks: usize| {
|
|
let mut doc = Document::new("blocks");
|
|
blocks_with_cuts(&mut doc, 0, blocks, 3);
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
assert!(model.results.iter().all(|r| r.error.is_none()), "{:?}", model.results.iter().find(|r| r.error.is_some()));
|
|
let work = counted(|| model.evaluate(&doc));
|
|
assert_eq!(model.last_recomputed, 0);
|
|
work.body_searches
|
|
};
|
|
let (few, many) = (searches(4), searches(24));
|
|
assert_eq!(few, many, "searches grew with the bodies: {few} for 4 blocks, {many} for 24");
|
|
}
|
|
|
|
/// The bodies part of the placement digest as it was before the bodies were looked up once:
|
|
/// each body searched by name, placed through [`body_world`].
|
|
fn digest_searching_each_body(doc: &Document, f: &Feature, st: &ModelState) -> u64 {
|
|
use std::hash::{Hash, Hasher};
|
|
let mut reads = PlacementReads::default();
|
|
reads.drawn_targets(Some(st), f);
|
|
let inverse = mat_inverse(&doc.component_transform(f.component)).unwrap();
|
|
let mut h = std::collections::hash_map::DefaultHasher::new();
|
|
for name in &reads.bodies {
|
|
name.hash(&mut h);
|
|
match st.body(name) {
|
|
Some(b) => hash_placement(&mat_mul(&inverse, &body_world(doc, b)), &mut h),
|
|
None => u8::MAX.hash(&mut h),
|
|
}
|
|
}
|
|
h.finish() | 1
|
|
}
|
|
|
|
#[test]
|
|
fn looking_bodies_up_once_keeps_every_placement_digest() {
|
|
// Two parts placed apart, a body moved into the other part and one moved within its part:
|
|
// each cut's digest is the one searching each body gave, bit for bit, so saved caches stay
|
|
// valid.
|
|
let mut doc = Document::new("digests");
|
|
let a = doc.add_component(Some("A"), 0).unwrap();
|
|
let b = doc.add_component(Some("B"), 0).unwrap();
|
|
blocks_with_cuts(&mut doc, a, 5, 2);
|
|
blocks_with_cuts(&mut doc, b, 4, 2);
|
|
blocks_with_cuts(&mut doc, 0, 3, 1);
|
|
place(&mut doc, a, rigid(Vec3::new(3.0, -7.0, 1.5), Vec3::ZERO, Vec3::Z, 0.4));
|
|
place(&mut doc, b, rigid(Vec3::new(-20.0, 5.0, 0.0), Vec3::ZERO, Vec3::X, 0.25));
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let names: Vec<String> = model.state().bodies.iter().map(|b| b.name.clone()).collect();
|
|
assert_eq!(names.len(), 12);
|
|
doc.body_components.insert(names[1].clone(), b);
|
|
doc.body_offsets.insert(names[2].clone(), rigid(Vec3::new(0.0, 0.0, 2.0), Vec3::ZERO, Vec3::Y, 0.1));
|
|
doc.body_offsets.insert(names[6].clone(), rigid(Vec3::new(1.0, 1.0, 0.0), Vec3::ZERO, Vec3::Z, -0.3));
|
|
model.evaluate(&doc);
|
|
let st = model.state();
|
|
let cuts: Vec<&Feature> = doc.features.iter().filter(|f| matches!(f.kind, FeatureKind::Box { operation: Operation::Cut, .. })).collect();
|
|
assert_eq!(cuts.len(), 5);
|
|
for f in cuts {
|
|
let digest = placement_digest(&doc, f, Some(&st));
|
|
assert_ne!(digest, 0);
|
|
assert_eq!(digest, digest_searching_each_body(&doc, f, &st), "cut {}", f.id);
|
|
}
|
|
}
|
|
|
|
/// `comps` parts, each with `bodies` boxes, `sketches` sketches and `taps` taps, placed `copies`
|
|
/// times: a design and its state, made without evaluating it.
|
|
fn placed_parts(comps: usize, bodies: usize, sketches: usize, taps: usize, copies: usize) -> (Document, ModelState) {
|
|
let mut doc = Document::new("placed parts");
|
|
let mut one = Document::new("one sketch");
|
|
one.add_feature(line_sketch(PlaneRef::Origin { name: "XY".into() }, Vec2::new(3.0, 4.0)), None).unwrap();
|
|
let mut m = Model::new();
|
|
m.evaluate(&one);
|
|
let solved = m.state().sketches.first().unwrap().clone();
|
|
let mut st = ModelState::default();
|
|
let solid = kernel::box_solid(Vec3::ZERO, Vec3::new(2.0, 3.0, 4.0)).unwrap();
|
|
for c in 0..comps {
|
|
let comp = doc.add_component(Some(&format!("C{c}")), 0).unwrap();
|
|
let o = doc.occurrences.iter_mut().find(|o| o.component == comp).unwrap();
|
|
o.transform = rigid(Vec3::new(10.0 * c as f64, 0.0, 0.0), Vec3::ZERO, Vec3::Z, 0.01 * c as f64);
|
|
for k in 1..copies {
|
|
doc.add_occurrence(comp, 0, rigid(Vec3::new(10.0 * c as f64, 20.0 * k as f64, 0.0), Vec3::ZERO, Vec3::Z, 0.02 * k as f64)).unwrap();
|
|
}
|
|
let mut names = Vec::new();
|
|
for b in 0..bodies {
|
|
let kind =
|
|
serde_json::from_value(serde_json::json!({"type": "box", "corner": [0, 0, 0], "length": "2", "width": "3", "height": "4"})).unwrap();
|
|
let name = format!("B{c}_{b}");
|
|
let id = doc.add_feature(kind, Some(&name)).unwrap();
|
|
doc.feature_mut(id).unwrap().component = comp;
|
|
st.bodies.push(ModelBody::new(name.clone(), solid.clone(), id));
|
|
names.push((name, id));
|
|
}
|
|
for s in 0..sketches {
|
|
let id = doc.add_feature(line_sketch(PlaneRef::Origin { name: "XY".into() }, Vec2::new(1.0 + s as f64, 2.0)), None).unwrap();
|
|
doc.feature_mut(id).unwrap().component = comp;
|
|
let mut s2 = SolvedSketch::clone(&solved);
|
|
s2.feature = id;
|
|
st.sketches.push(Arc::new(s2));
|
|
}
|
|
for t in 0..taps {
|
|
let (body, feature) = names[t % names.len()].clone();
|
|
st.threads.push(ThreadInfo {
|
|
feature,
|
|
body,
|
|
designation: "M6".into(),
|
|
major_diameter: 6.0,
|
|
radius: 3.0,
|
|
pitch: 1.0,
|
|
internal: true,
|
|
handedness: Default::default(),
|
|
axis_point: Vec3::new(1.0, 1.0, 0.0),
|
|
axis: solidcraft_geom::UnitVec3::Z,
|
|
start: 0.0,
|
|
end: 4.0,
|
|
});
|
|
}
|
|
}
|
|
(doc, st)
|
|
}
|
|
|
|
#[test]
|
|
fn placing_parts_looks_each_sketch_and_tap_up_once() {
|
|
// A large assembly searched all features for every sketch and construction, and all bodies
|
|
// twice for every tap and placement, each time its world state was made (every command).
|
|
let searches = |sketches: usize, taps: usize| {
|
|
let (doc, state) = placed_parts(4, 2, sketches, taps, 3);
|
|
let mut world = ModelState::default();
|
|
let n = searched(|| world = world_state(&doc, &state));
|
|
assert_eq!(world.bodies.len(), 4 * 2 * 3);
|
|
assert_eq!(world.sketches.len(), 4 * sketches);
|
|
assert_eq!(world.threads.len(), 4 * taps * 3);
|
|
n
|
|
};
|
|
assert_eq!(searches(8, 6), searches(1, 1));
|
|
}
|
|
|
|
#[test]
|
|
fn a_placed_tap_follows_its_body_offset() {
|
|
let (mut doc, state) = placed_parts(1, 1, 0, 1, 1);
|
|
let comp = doc.components[0].id;
|
|
doc.body_offsets.insert("B0_0".into(), rigid(Vec3::new(0.0, 0.0, 7.0), Vec3::ZERO, Vec3::Z, 0.0));
|
|
let world = world_state(&doc, &state);
|
|
let tap = world.threads.first().unwrap();
|
|
let expected =
|
|
apply_point(&mat_mul(&doc.component_transform(comp), &rigid(Vec3::new(0.0, 0.0, 7.0), Vec3::ZERO, Vec3::Z, 0.0)), Vec3::new(1.0, 1.0, 0.0));
|
|
assert!(tap.axis_point.dist(expected) < 1e-9, "{:?} {expected:?}", tap.axis_point);
|
|
}
|
|
|
|
/// What adding a feature of `kind` at the end of `doc` did to the bodies already there: how many
|
|
/// its cut ran booleans on, and which it left exactly as they were (the same geometry, its name,
|
|
/// key and face names carried over). A cut that cannot reach a body hands it back as it was, and
|
|
/// must not pay a whole boolean to find that out (#10225); the sheet metal hole (#10226) and the
|
|
/// cosmetic thread (#10227) check their own shortcuts with it too.
|
|
pub(super) struct CutWork {
|
|
pub cut: usize,
|
|
pub kept: Vec<String>,
|
|
pub model: Model,
|
|
}
|
|
|
|
pub(super) fn cut_work(doc: &mut Document, kind: FeatureKind) -> CutWork {
|
|
let mut model = Model::new();
|
|
model.evaluate(doc);
|
|
let id = doc.add_feature(kind, None).unwrap();
|
|
let work = counted(|| model.evaluate(doc));
|
|
let result = model.result(id).unwrap();
|
|
assert_eq!(result.error, None, "the feature builds");
|
|
let before = model.state_before(id);
|
|
let kept = result
|
|
.state
|
|
.bodies
|
|
.iter()
|
|
.filter(|b| {
|
|
before
|
|
.body(&b.name)
|
|
.is_some_and(|old| old.body.same(&b.body) && old.key == b.key && crate::naming::face_names(old) == crate::naming::face_names(b))
|
|
})
|
|
.map(|b| b.name.clone())
|
|
.collect();
|
|
CutWork { cut: work.cut, kept, model }
|
|
}
|
|
|
|
/// A box body named `name`, `size` long on each side from `corner`.
|
|
fn block(doc: &mut Document, name: &str, corner: Vec3, size: [f64; 3]) {
|
|
let id = doc
|
|
.add_feature(
|
|
FeatureKind::Box {
|
|
corner: point_expr(corner),
|
|
length: size[0].to_string().into(),
|
|
width: size[1].to_string().into(),
|
|
height: size[2].to_string().into(),
|
|
operation: Operation::NewBody,
|
|
},
|
|
None,
|
|
)
|
|
.unwrap();
|
|
doc.feature_mut(id).unwrap().body_names = vec![name.into()];
|
|
}
|
|
|
|
/// A cylinder that cuts, standing on `base` along Z.
|
|
fn cutter(base: Vec3, radius: f64, height: f64) -> FeatureKind {
|
|
FeatureKind::Cylinder {
|
|
base: point_expr(base),
|
|
axis: Dir(Vec3::Z),
|
|
radius: radius.to_string().into(),
|
|
height: height.to_string().into(),
|
|
operation: Operation::Cut,
|
|
references: Vec::new(),
|
|
}
|
|
}
|
|
|
|
/// A cut leaves the bodies its tool cannot reach as they were, without a boolean on each: in a
|
|
/// design of many bodies those booleans were most of a hole's time (#10225).
|
|
#[test]
|
|
fn a_cut_leaves_bodies_it_cannot_reach_as_they_were() {
|
|
let mut doc = Document::new("far");
|
|
block(&mut doc, "Near", Vec3::ZERO, [50.0, 40.0, 30.0]);
|
|
// 0.5 mm clear of the tool, and far off.
|
|
block(&mut doc, "Beside", Vec3::new(13.5, 0.0, 0.0), [20.0, 40.0, 30.0]);
|
|
for i in 0..5 {
|
|
block(&mut doc, &format!("Far{i}"), Vec3::new(200.0 * (i + 1) as f64, 0.0, 0.0), [50.0, 40.0, 30.0]);
|
|
}
|
|
// Near and Beside overlap; the hole goes through Near only, beside Beside.
|
|
let work = cut_work(&mut doc, cutter(Vec3::new(10.0, 20.0, -5.0), 3.0, 40.0));
|
|
assert_eq!(work.cut, 1, "only the body the tool reaches goes through the boolean");
|
|
assert_eq!(work.kept, ["Beside", "Far0", "Far1", "Far2", "Far3", "Far4"]);
|
|
assert!(volume(&work.model, "Near") < 60_000.0 - 800.0, "and it is cut");
|
|
}
|
|
|
|
/// A cut still goes through the boolean wherever its tool reaches a body or comes close: on a
|
|
/// face, along a line, a hair beside it, into a dome above its edge circle. (Bodies its tool
|
|
/// cannot reach are left out of it: `a_cut_leaves_bodies_it_cannot_reach_as_they_were`.)
|
|
#[test]
|
|
fn a_cut_still_runs_where_its_tool_touches_grazes_or_meets_a_curved_face() {
|
|
// A cylinder whose side is tangent to the face x = 50, one a hair clear of it, one 0.1 mm in.
|
|
for (x, cuts) in [(53.0, false), (53.0005, false), (52.9, true)] {
|
|
let mut doc = Document::new("graze");
|
|
block(&mut doc, "A", Vec3::ZERO, [50.0, 40.0, 30.0]);
|
|
let work = cut_work(&mut doc, cutter(Vec3::new(x, 20.0, 0.0), 3.0, 30.0));
|
|
assert_eq!(work.cut, 1, "the tool at x = {x} goes through the boolean");
|
|
let v = volume(&work.model, "A");
|
|
assert_eq!(v < 60_000.0 - 1.0, cuts, "the tool at x = {x} cuts material: {v}");
|
|
assert!(!cuts || work.kept.is_empty(), "a body cut is a new body");
|
|
}
|
|
// A box meeting the block only along its top edge.
|
|
let mut doc = Document::new("edge");
|
|
block(&mut doc, "A", Vec3::ZERO, [50.0, 40.0, 30.0]);
|
|
let along = FeatureKind::Box {
|
|
corner: point_expr(Vec3::new(50.0, 0.0, 30.0)),
|
|
length: "10".into(),
|
|
width: "40".into(),
|
|
height: "10".into(),
|
|
operation: Operation::Cut,
|
|
};
|
|
assert_eq!(cut_work(&mut doc, along).cut, 1);
|
|
// A dome: a sphere's cap rising 10 mm above the circle it stands on. A thin tool drilled into
|
|
// its top near the apex, well above that circle, cuts it.
|
|
let mut doc = Document::new("dome");
|
|
doc.add_feature(FeatureKind::Sphere { center: point_expr(Vec3::new(0.0, 0.0, -10.0)), radius: "20".into(), operation: Operation::NewBody }, None)
|
|
.unwrap();
|
|
let below = FeatureKind::Box {
|
|
corner: point_expr(Vec3::new(-30.0, -30.0, -40.0)),
|
|
length: "60".into(),
|
|
width: "60".into(),
|
|
height: "40".into(),
|
|
operation: Operation::Cut,
|
|
};
|
|
doc.add_feature(below, None).unwrap();
|
|
let mut model = Model::new();
|
|
model.evaluate(&doc);
|
|
let dome = model.state().bodies[0].name.clone();
|
|
let whole = volume(&model, &dome);
|
|
let work = cut_work(&mut doc, cutter(Vec3::new(2.0, 1.0, 8.0), 1.0, 5.0));
|
|
assert_eq!(work.cut, 1);
|
|
assert!(volume(&work.model, &dome) < whole - 1.0, "the drill cuts into the dome");
|
|
assert!(work.kept.is_empty());
|
|
}
|
|
|
|
/// A cylinder body named `name` standing on `base` along Z.
|
|
fn shaft(doc: &mut Document, name: &str, base: Vec3, radius: f64, height: f64) {
|
|
let id = doc
|
|
.add_feature(
|
|
FeatureKind::Cylinder {
|
|
base: point_expr(base),
|
|
axis: Dir(Vec3::Z),
|
|
radius: radius.to_string().into(),
|
|
height: height.to_string().into(),
|
|
operation: Operation::NewBody,
|
|
references: Vec::new(),
|
|
},
|
|
None,
|
|
)
|
|
.unwrap();
|
|
doc.feature_mut(id).unwrap().body_names = vec![name.into()];
|
|
}
|
|
|
|
/// The work of adding `kind` at the end of `doc`, and the tap markings the design then has.
|
|
fn marking_work(doc: &mut Document, kind: FeatureKind) -> (Counts, Vec<ThreadInfo>) {
|
|
let mut model = Model::new();
|
|
model.evaluate(doc);
|
|
let id = doc.add_feature(kind, None).unwrap();
|
|
let work = counted(|| model.evaluate(doc));
|
|
assert_eq!(model.result(id).unwrap().error, None, "the feature builds");
|
|
(work, model.state().threads.clone())
|
|
}
|
|
|
|
/// A cosmetic tap marking at `p`.
|
|
fn marking(p: Vec3) -> FeatureKind {
|
|
FeatureKind::Thread { face: FacePick(p), designation: Some("M6".into()), length: None, modeled: false, handedness: ThreadHandedness::Right }
|
|
}
|
|
|
|
/// A tap marking looks for its cylinder in the bodies near it only: each body searched was
|
|
/// tessellated again, so many markings in a design of many bodies took quadratic time (#10227).
|
|
#[test]
|
|
fn a_tap_marking_searches_only_the_bodies_near_it() {
|
|
let mut doc = Document::new("far");
|
|
shaft(&mut doc, "Shaft", Vec3::ZERO, 3.0, 6.0);
|
|
for i in 0..5 {
|
|
block(&mut doc, &format!("Far{i}"), Vec3::new(200.0 * (i + 1) as f64, 0.0, 0.0), [50.0, 40.0, 30.0]);
|
|
}
|
|
let (work, threads) = marking_work(&mut doc, marking(Vec3::new(3.0, 0.0, 3.0)));
|
|
assert_eq!(work.cylinder_search, 1, "only the shaft is searched");
|
|
assert_eq!(threads.len(), 1);
|
|
assert_eq!(threads[0].body, "Shaft");
|
|
assert_eq!(threads[0].designation, "M6");
|
|
assert!((threads[0].radius - 3.0).abs() < 1e-6 && !threads[0].internal);
|
|
|
|
// A tapped hole in a plate among far bodies: only the plate is searched for its wall.
|
|
let mut doc = Document::new("tapped");
|
|
block(&mut doc, "Plate", Vec3::ZERO, [60.0, 60.0, 12.0]);
|
|
for i in 0..5 {
|
|
block(&mut doc, &format!("Far{i}"), Vec3::new(200.0 * (i + 1) as f64, 0.0, 0.0), [50.0, 40.0, 30.0]);
|
|
}
|
|
let hole = FeatureKind::Hole {
|
|
position: FacePick(Vec3::new(30.0, 30.0, 12.0)),
|
|
at: None,
|
|
direction: Dir(-Vec3::Z),
|
|
diameter: "5".into(),
|
|
depth: Some("10".into()),
|
|
hole: HoleKind::default(),
|
|
points: None,
|
|
thread: Some("M6".into()),
|
|
thread_depth: None,
|
|
handedness: ThreadHandedness::Right,
|
|
to: None,
|
|
references: Vec::new(),
|
|
};
|
|
let (work, threads) = marking_work(&mut doc, hole);
|
|
assert_eq!(work.cylinder_search, 1, "only the plate is searched");
|
|
assert_eq!(work.tapped_wall, 1, "only the plate's faces are read for the wall");
|
|
assert_eq!(threads.len(), 1);
|
|
assert_eq!(threads[0].body, "Plate");
|
|
assert!(threads[0].internal && (threads[0].radius - 2.5).abs() < 1e-6);
|
|
}
|
|
|
|
/// Bodies within reach of a tap marking are still searched: the shaft it lies on, a block 3 mm
|
|
/// off (within a twentieth of the block's size, where the cylinder search itself looks), and one
|
|
/// 3.6 mm off (just past it, but within the margin the boxes keep); a block 4.5 mm off is not.
|
|
/// The marking stays on the shaft.
|
|
#[test]
|
|
fn a_tap_marking_still_searches_the_bodies_within_its_reach() {
|
|
let mut doc = Document::new("near");
|
|
shaft(&mut doc, "Shaft", Vec3::ZERO, 3.0, 6.0);
|
|
// Each block is 50 x 40 x 30 (a twentieth of its size is 3.54 mm), its face x = 3 + gap.
|
|
for (name, gap) in [("Close", 3.0), ("Edge", 3.6), ("Clear", 4.5)] {
|
|
block(&mut doc, name, Vec3::new(3.0 + gap, -20.0, 0.0), [50.0, 40.0, 30.0]);
|
|
}
|
|
let (work, threads) = marking_work(&mut doc, marking(Vec3::new(3.0, 0.0, 3.0)));
|
|
assert_eq!(work.cylinder_search, 3, "the shaft, Close and Edge are searched");
|
|
assert_eq!(threads.len(), 1);
|
|
assert_eq!(threads[0].body, "Shaft");
|
|
|
|
// A pin in a hole a hair wider: a marking on the pin, and one on the hole's wall.
|
|
for (p, body, internal) in [(Vec3::new(2.0, 0.0, 5.0), "Pin", false), (Vec3::new(2.5, 0.0, 5.0), "Plate", true)] {
|
|
let mut doc = Document::new("pin");
|
|
block(&mut doc, "Plate", Vec3::new(-20.0, -20.0, 0.0), [40.0, 40.0, 10.0]);
|
|
let bore = FeatureKind::Cylinder {
|
|
base: point_expr(Vec3::new(0.0, 0.0, -1.0)),
|
|
axis: Dir(Vec3::Z),
|
|
radius: "2.5".into(),
|
|
height: "12".into(),
|
|
operation: Operation::Cut,
|
|
references: Vec::new(),
|
|
};
|
|
doc.add_feature(bore, None).unwrap();
|
|
shaft(&mut doc, "Pin", Vec3::ZERO, 2.0, 10.0);
|
|
let mut kind = marking(p);
|
|
if let FeatureKind::Thread { designation, .. } = &mut kind {
|
|
*designation = None;
|
|
}
|
|
let (work, threads) = marking_work(&mut doc, kind);
|
|
assert_eq!(work.cylinder_search, 2, "both bodies are searched for {body}");
|
|
assert_eq!(threads.len(), 1);
|
|
assert_eq!(threads[0].body, body);
|
|
assert_eq!(threads[0].internal, internal);
|
|
}
|
|
}
|
|
|
|
/// A flat sheet of the default rule (2.5 mm steel) on a `w` x `h` rectangle from `corner` on XY.
|
|
fn flat_sheet(doc: &mut Document, corner: Vec2, w: f64, h: f64) {
|
|
let mut sk = Sketch::new();
|
|
let p = [corner, corner + Vec2::new(w, 0.0), corner + Vec2::new(w, h), corner + Vec2::new(0.0, h)].map(|q| sk.add_point(q, None).unwrap());
|
|
for k in 0..4 {
|
|
sk.add_line_pts(p[k], p[(k + 1) % 4], None).unwrap();
|
|
}
|
|
let sketch = doc.add_feature(FeatureKind::Sketch { plane: PlaneRef::Origin { name: "XY".into() }, sketch: sk }, None).unwrap();
|
|
doc.add_feature(FeatureKind::SheetBase { sketch: SketchId(sketch), profiles: ProfileSel::All, rule: None, flip: false }, None).unwrap();
|
|
}
|
|
|
|
/// The sheet metal bodies of a model.
|
|
fn sheet_bodies(model: &Model) -> Vec<String> {
|
|
model.state().sheets.iter().map(|s| s.body.clone()).collect()
|
|
}
|
|
|
|
/// A cut leaves the sheets it cannot reach as they were, without checking that it would leave
|
|
/// each one unchanged (#10226).
|
|
#[test]
|
|
fn a_cut_leaves_sheets_it_cannot_reach_as_they_were() {
|
|
let mut doc = Document::new("far sheets");
|
|
for i in 0..5 {
|
|
flat_sheet(&mut doc, Vec2::new(200.0 * i as f64, 0.0), 150.0, 100.0);
|
|
}
|
|
block(&mut doc, "Plate", Vec3::new(0.0, -200.0, 0.0), [60.0, 60.0, 12.0]);
|
|
let work = cut_work(&mut doc, cutter(Vec3::new(30.0, -170.0, -1.0), 3.0, 20.0));
|
|
assert_eq!(work.cut, 1, "only the plate goes through a boolean");
|
|
assert_eq!(work.kept, sheet_bodies(&work.model), "every sheet is left as it was");
|
|
assert!(volume(&work.model, "Plate") < 43_200.0 - 300.0, "and the plate is cut");
|
|
}
|
|
|
|
/// A tapped hole reads for its wall the faces of the bodies its drill line comes near: the plate
|
|
/// it is drilled in, a block far below on the same line, and one whose side lies a radius off the
|
|
/// line; not a block beside it. The marking stays in the plate's hole.
|
|
#[test]
|
|
fn a_tapped_hole_reads_the_bodies_along_its_drill_line() {
|
|
let mut doc = Document::new("line");
|
|
block(&mut doc, "Plate", Vec3::ZERO, [60.0, 60.0, 12.0]);
|
|
block(&mut doc, "Below", Vec3::new(20.0, 20.0, -150.0), [20.0, 20.0, 20.0]);
|
|
block(&mut doc, "Grazing", Vec3::new(32.5, 20.0, -60.0), [20.0, 20.0, 20.0]);
|
|
block(&mut doc, "Beside", Vec3::new(50.0, 20.0, -60.0), [20.0, 20.0, 20.0]);
|
|
let hole = FeatureKind::Hole {
|
|
position: FacePick(Vec3::new(30.0, 30.0, 12.0)),
|
|
at: None,
|
|
direction: Dir(-Vec3::Z),
|
|
diameter: "5".into(),
|
|
depth: Some("10".into()),
|
|
hole: HoleKind::default(),
|
|
points: None,
|
|
thread: Some("M6".into()),
|
|
thread_depth: None,
|
|
handedness: ThreadHandedness::Right,
|
|
to: None,
|
|
references: Vec::new(),
|
|
};
|
|
let (work, threads) = marking_work(&mut doc, hole);
|
|
assert_eq!(work.tapped_wall, 3, "Plate, Below and Grazing are read");
|
|
assert_eq!(threads.len(), 1);
|
|
assert_eq!(threads[0].body, "Plate");
|
|
assert!(threads[0].internal && (threads[0].radius - 2.5).abs() < 1e-6);
|
|
}
|