Files
solidcraft/tests/KNOWN_FAILING_TESTS
T
lewis2eandClaude Opus 5.5 718d5a4383 Intersection Curve: take two sketch curves, no helper surfaces (#11048) (#11049)
* claim: #11048

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: take two sketch curves, no helper surfaces (#11048)

Intersection Curve now also takes curves of other sketches. Each curve
stands in for the surface you would get by extruding it along its own
sketch's normal, both ways and as far as needed, so two sketch curves
(or a curve and a face) give their 3D crossing without the two Surface >
Extrude features it used to take. The surface is never added to the
model. Sketches on parallel planes are refused with an error saying why.

The result stays a linked 3D wire that follows edits to either curve.
In the tool, a curve of another sketch fills a side like a face does;
after the first pick the status bar asks for the second, a right-click
starts the picks over, and the hint returns once the curve is made.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: keep other tools' right-click, update the tooltip, add a UI scenario (#11048)

The right-click change now applies to Intersection Curve only: Project to
Surface and Spun Profile behave as on main again.

The toolbar tooltip now says Intersection Curve also takes curves of other
sketches, in every catalog that has it, using each language's wording from
the Project to Surface tooltip.

New UI scenario intersection_curve_from_two_sketch_curves: a line on XY and
a line on YZ give one linked 3D wire along X at y = 0, z = 5; it also checks
the second-pick prompt and that a right-click starts the picks over.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GG4jU9aCv381PgLCsseQMP

* Intersection Curve: a picked spline wall meets whole, in one curve (#11048, #9009)

On the SMLib kernel a fit-point spline's wall is one face per span, and
Mesh::surface_patch keeps smooth-joined faces apart, so a face pick met
only the span under the pick and gave part of the crossing (#9009 again,
for faces as well as for sketch curves). A face pick now takes the faces
joined across seams and smooth joins, never across a crease.

The imprint also splits a crossing at every face boundary of either
side, so a crossing came as one wire per span. The pieces are now joined
end to end into one wire, keeping their exact curves; a piece that runs
the other way is reversed as a record curve.

A curve side's sweep is sized from the other body's exact bounds, not
its display mesh. The #9009 test's premise that the spans are one
surface_patch no longer holds and is removed; its checks are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Intersection Curve: a picked face joins only tangent spline faces, from exact geometry (#11048)

Which faces a face pick means is now decided on the exact surfaces, not the
display mesh: the picked face and the spline faces joined to it at least
tangentially (the kernel's seam check), so a spline wall's spans still meet
as one (#9009) while a plane, a round or any analytic face is that face
alone. The pieces of a crossing are joined within ten times the kernel's
intersection tolerance instead of a fixed 1e-4 mm.

Tests: a flat face beside a round and the round itself each give their own
crossing; two sketch curves give one curve at 1/100 and 100 times the size.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Known-failing tests: the picked spline wall's intersection curve passes now (#11048, #9009)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 06:52:54 +00:00

40 lines
7.3 KiB
Plaintext

# The cargo tests that fail today on the kernel, solidcore, one a line: `<test> <why it fails
# today>`, with the issue that tracks it when there is one. Sorted. `<test>` is nextest's
# `<binary id>::<test name>`, as the junit report names it. CI's test jobs (`cargo xtask known-failing`)
# fail on a test that fails and is not listed here, and on a listed test that passes: a fix removes its
# line in the same pull request. The tests stay un-ignored, so every run shows whether they still fail.
# Refresh: download the junit artifacts of develop's latest CI run, one directory each
# (`gh run download <run> -R tangency-labs/solidcraft -n <artifact> -D <dir>/<artifact>` for junit
# and junit-gpu-1..4), run `cargo xtask known-failing --junit <dir>`, then drop each FIXED line and
# add each REGRESSION line with its cause, from the test's failure message.
solidcraft-cli::action_matrix::action_matrix_sample 3 baseline actions fail, the same 3 as on C++: 2 shells (Bad Loop Orient on issue-616-lid-ribs; status 1001 on filleted-shelled-box), 1 fillet (SmSurfOfRevolution Test #7 on oblique_cut_of_cylinder)
solidcraft-cli::model_cache::a_later_round_after_opening_blends_the_saved_rounds_again the later r3 round at the r2 mitre builds solidcore's 10-face corner (7928.743041), the test wants SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310: 15 faces, 7928.142563938
solidcraft-cli::naming_corpus::corpus_designs_name_alike_every_build_and_fail_where_a_reference_is_gone oracle/83-boundary-loop-thicken does not load: step 8, thicken status 1001, as on C++
solidcraft-doc::eval::cost_tests::a_tap_marking_searches_only_the_bodies_near_it main's mesh-based version (#10303) not taken; the exact replacement is to come
solidcraft-doc::eval::cost_tests::a_tap_marking_still_searches_the_bodies_within_its_reach main's mesh-based version (#10303) not taken; the exact replacement is to come
solidcraft-engine::cmd::edit::tests::inserting_variable_fillet_control_preserves_parameters_at_existing_positions solidcore refuses a variable fillet whose law has a corner (solidcore#430)
solidcraft-engine::cmd::file::tests::each_format_has_an_export_command_of_its_own the box's planar faces are meshed into 124 triangles, not 12 (the STL is 6284 bytes, the test counts 84 + 50 x 12), as on SMLib
solidcraft-engine::extent_tests::cut_to_the_far_side_of_a_curved_wall main's mesh-based version (#8634) not taken; the exact replacement is to come
solidcraft-engine::face_name_tests::a_join_that_makes_the_body_bigger_leaves_round_walls_it_never_touched_alone main's edge lookup by a stored point (#11286) finds the edge on the display mesh (edge_near on the body's mesh), not taken; the exact replacement is to come
solidcraft-engine::hole_face_tests::a_hole_wider_than_the_part_says_it_removes_all_of_it a 40 mm hole at (10, 10) touches the plate's edge y = 30 at one point; the kernel parts the plate there into 2 bodies, the test wants truck's 1, as on SMLib
solidcraft-engine::measure_centre_tests::a_fillet_round_a_boss_reports_its_radius the round at the foot of a boss is not an analytic torus of minor radius 3, so no face of the body is (the test finds none to measure), as on SMLib
solidcraft-engine::tests::chord_and_variable_fillets its 2 → 4 → 2 waist: solidcore refuses a variable fillet whose law has a corner (solidcore#430)
solidcraft-engine::tests::fillet_fit_taper_closes_to_a_point fillet status 1001 on the taper fit (radius 16 closing to 0), as on C++
solidcraft-engine::tests::mirror_placed::dragging_a_mirrored_part_meshes_its_copies_once a copy of a copy drawn from its first copy's triangles (#10101) is triangulated differently from a fresh mesh of it, where truck's meshes are the same under a rigid move, as on SMLib
solidcraft-engine::tests::shell_tangent_chain_that_opens_every_face_explains_how_to_keep_walls the 2 mm shell of the box with every edge rounded r 1.5, its front face open, fails SM_ERR_INVALID_INPUT at solidcore 8ddce9016: the wall is thicker than the rounds and their Ball corners (BallPatch, fillet_blend_corner), whose inward offsets collapse
solidcraft-kernel::blend::corner_tests::a_round_ending_in_an_earlier_round_matches_both_together fillet status 1001 on the round that ends in the earlier one, as on C++
solidcraft-kernel::blend::corner_tests::corner_blends_hold_at_any_scale at 0.01x the arc case's rounds remove 72.783 (scaled back) against 72.713 at 1x, as on C++
solidcraft-kernel::blend_corner::tests::issue2422_vertical_after_separate_bottom_rounds the vertical edge after the separate bottom rounds is refused as smooth ("its faces meet tangentially, so there is nothing to round"): the rounds leave it tangent at solidcore 8ddce9016
solidcraft-kernel::blend_corner::tests::three_rounds_at_a_corner the corner's variable-radius transition between rounds of different radii meets its neighbours at 0.144 degrees once its sections are the balls' touch circles (fillet_gn_section_generator, solidcore#2262; 0 with the great circles), as on SMLib d01d7b0; the corner step replaces that transition
solidcraft-kernel::blend_variable::tests::variable_radius_on_a_box_edge the variable round r 2 to 5 along a box edge fails status 1001 at solidcore 8ddce9016
solidcraft-kernel::blend_variable::tests::variable_radius_with_a_corner_through_a_middle_point solidcore refuses a variable fillet whose law has a corner (solidcore#430)
solidcraft-kernel::blend_wrong_way_tests::a_chamfer_that_would_grow_the_part_on_a_convex_edge_is_refused at solidcore 8ddce9016 the 0.5 chamfer of the ball cut's rim is no longer refused as too large: the session builds no face (made no change), its tangent chain running into an unblended edge
solidcraft-kernel::corner_g2::tests::a_long_setback_keeps_the_g2_patch_inside_the_box at set backs 11 to 15 the G2 corner patch bulges past the box, as on C++
solidcraft-kernel::corner_g2::tests::curvature_rounds_meet_at_a_g2_corner the corner between curvature rounds jumps 2.07 in curvature over 538 stations on solidcore; the test wants it curvature continuous, as SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 builds it
solidcraft-kernel::corner_g2::tests::the_box_corner_g2_patch_is_a_closed_solid_curvature_continuous_to_its_neighbours the fitted G2 corner patch bulges 1.7e-5 past the box, as on C++
solidcraft-kernel::fillet_setback_tests::a_setback_not_past_the_radius_is_refused_naming_the_least solidcore builds setback 5.5 (15 faces) where SMLib f916a8d's setback corner (smlib#104), which solidcore ports in solidcore#2310 refuses it naming the least that builds; nothing names the least setback on solidcore until then
solidcraft-kernel::modify_history_tests::fillet_variable_and_chord the variable round r 2 to 5 along the cube's edge fails status 1001 at solidcore 8ddce9016, as variable_radius_on_a_box_edge
solidcraft-kernel::native::tests::box_and_fillet_have_stable_wire_records the box-edge round's wire record differs from the fixture at solidcore 8ddce9016 (a value 3 is 5): the fixture is re-blessed (NATIVE_BREP_BLESS=1) once the change is shown right
solidcraft-smlib::ops::tests::a_variable_round_with_a_corner_in_its_law_is_its_balls_union solidcore refuses a variable fillet whose law has a corner (solidcore#430)
solidcraft-ui-egui::preselect_tests::variable_fillet_round_trip the dialog's variable round fails status 1001 at solidcore 8ddce9016, as variable_radius_on_a_box_edge