Files
solidcraft/assets/locales/zh.json
T
SS-ENandClaude Opus 5.5 776541b081 Agent commands compute off the window thread, so the window stays live (opt-in) (#1989) (#3340)
An agent's design changes over the control channel (engine.execute, engine.batch) are evaluated
ahead on a copy of the session on an `agent` worker, then run on the window thread reusing every
feature computed there (doc::KeptResults, whatever the bounded evaluation cache dropped); the
worker also makes the display meshes of the bodies they end with. Exports run on a copy. While a
change computes, or the agent cursor acts one out, ui.*, inspection and screenshots answer; later
design changes wait their turn. A chip names the command with Stop. A person's edit meanwhile goes
first; a replaced design refuses the request. Preference: Preferences > AI, agent_off_thread, off
by default.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:58:56 +00:00

1895 lines
93 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"0 turns it off": "0 表示关闭",
"1. Open GitHub draft below, then paste the report copied to your clipboard.": "1. 点击下方按钮打开 GitHub 草稿,然后粘贴已复制到剪贴板的报告。",
"1. Open GitHub draft below. Your title and report will be filled in.": "1. 点击下方按钮打开 GitHub 草稿。标题和报告将自动填入。",
"2. Attach your screenshot: copy and paste it, or save and upload the PNG.": "2. 附上截图:复制并粘贴,或保存为 PNG 后上传。",
"2D": "2D",
"3. Click Submit new issue on GitHub to send your report.": "3. 在 GitHub 上点击 Submit new issue 发送报告。",
"A new configuration, a copy of the active one": "新建配置,为当前配置的副本",
"ARRANGE": "排列",
"About SolidCraft": "关于 SolidCraft",
"Acceleration": "加速度",
"Access": "可达性",
"Actions": "操作",
"Active": "活动",
"Active rule": "活动规则",
"Add": "添加",
"Add Key": "添加按键",
"Add Mid Radius": "添加中间半径",
"Add Row": "添加行",
"Add condition": "添加条件",
"Add or edit rule": "添加或编辑规则",
"Against": "对照",
"Alignment": "对齐",
"All Sketch Points": "所有草图点",
"All components": "所有零部件",
"All open designs": "所有打开的设计",
"Allowed expressions, separated by semicolons": "允许的表达式,以分号分隔",
"Also deletes": "同时删除",
"Angle 2": "角度 2",
"Animate": "动画",
"Appearance name": "外观名称",
"Applied Radius": "应用半径",
"Apply To": "应用于",
"Apply to selection": "应用到选择",
"Apply your appearance first. Exports assigned appearances and materials created in this design.": "请先应用外观。导出已指定的外观和在此设计中创建的材质。",
"Arc length": "弧长",
"Area": "面积",
"As-Built": "现有位置",
"Assign Rule": "分配规则",
"Attachment": "附着",
"BLEND SURFACE": "混合曲面",
"BOUNDARY SURFACE": "边界曲面",
"BROWSER": "浏览器",
"Bend Line Position": "弯折线位置",
"Bend Position": "折弯位置",
"Bend Radius": "折弯半径",
"Bend Table": "折弯表",
"Bends": "折弯",
"Bodies": "实体",
"Body": "实体",
"Boundary": "边界",
"Bounding box": "边界框",
"CHECK": "检查",
"COMPONENTS": "组件",
"CONFIGURATIONS": "配置",
"CONSTRAIN": "约束",
"CONTACT": "接触",
"CONVERT": "转换",
"CSV or JSON: updates existing parameters, adds new ones": "CSV 或 JSON:更新现有参数、添加新参数",
"Capture All Positions": "捕获所有位置",
"Capture Pos.": "捕获位置",
"Catch Direction": "卡扣方向",
"Cells": "区域",
"Center X": "中心 X",
"Center Y": "中心 Y",
"Center of mass": "质心",
"Centre to centre": "中心距",
"Chamfer Type": "倒角类型",
"Check collisions": "检查碰撞",
"Checked": "已检查",
"Choose a new plane. Sketch geometry and dimensions stay unchanged in its two-dimensional coordinates.": "选择一个新平面。草图几何和尺寸在其二维坐标中保持不变。",
"Choose…": "选择…",
"Circular": "圆周",
"Circumference": "周长",
"Close draft": "关闭草稿",
"Collisions": "碰撞",
"Colour": "颜色",
"Comment": "注释",
"Component1": "组件1",
"Config Table": "配置表",
"Configuration": "配置",
"Configuration rules": "配置规则",
"Contact": "接触",
"Contact Sets": "接触集",
"Contact sets": "接触集",
"Continuity": "连续性",
"Copy Error Message": "复制错误消息",
"Copy Warning Message": "复制警告消息",
"Copy all licences": "复制所有许可证",
"Copy diagnostic information": "复制诊断信息",
"Copy report": "复制报告",
"Copy screenshot": "复制截图",
"Corner Relief": "拐角释放",
"Corner Relief Shape": "拐角释放形状",
"Counterbore depth": "沉孔深度",
"Countersink angle": "沉头角度",
"Create Issue — review draft": "创建 Issue——审阅草稿",
"Cross curves": "交叉曲线",
"Cube": "立方体",
"Current orthographic view (1:1 mm)": "当前正交视图(1:1毫米)",
"Current perspective view": "当前透视视图",
"Curv. Comb": "曲率梳",
"Curvature (G2)": "曲率 (G2)",
"Curvature change (G3)": "曲率变化 (G3)",
"Customize Toolbar": "自定义工具栏",
"Delete": "删除",
"Delete all": "全部删除",
"Delete rule": "删除规则",
"Delete the row": "删除此行",
"Delete the set": "删除此集合",
"Density": "密度",
"Dependents": "依赖项",
"Designs you open or save appear here.": "你打开或保存的设计会显示在此处。",
"Determined by To Object. Choose Angle to edit the angular extent.": "由“到对象”确定。选择“角度”可编辑角度范围。",
"Direction": "方向",
"Discard": "放弃",
"Do not export hidden edges": "不导出隐藏线",
"Don't ask again": "不再询问",
"Double-click to rename": "双击重命名",
"Double-clicking the middle button in the view: Home (the home view, framing what is shown), Fit (frame what is shown, keeping the orientation) or nothing": "在视图中双击中键:主视图(主视图,框住所显示的内容)、适合窗口(框住所显示的内容,保持方向)或无动作",
"Drive Joint": "驱动接头",
"Duration": "时长",
"Edges": "边",
"Edit": "编辑",
"Edit Profile Sketch": "编辑轮廓草图",
"Enable rule": "启用规则",
"Enabled": "已启用",
"End bulge": "终止鼓度",
"End continuity": "终止连续性",
"Explode": "爆炸",
"Explode Text": "分解文字",
"Export Animation…": "导出动画…",
"Export CSV…": "导出 CSV…",
"Export Current View as DXF": "将当前视图导出为DXF",
"Export Current View as DXF…": "将当前视图导出为DXF…",
"Export DXF": "导出DXF",
"Export DXF…": "导出DXF…",
"Export JSON…": "导出 JSON…",
"Export hidden edges as dashed lines": "以虚线导出隐藏线",
"Expression": "表达式",
"Extend to meet": "延伸至相交",
"Extents": "范围",
"FILES": "文件",
"FLAT": "展开",
"Face": "面",
"Face attachment lost": "面附着丢失",
"Faces": "面",
"Faces / edges / vertices": "面 / 边 / 顶点",
"Fastener": "紧固件",
"Favorites": "收藏",
"Favourite": "收藏",
"Feature": "特征",
"Files from many CAD programs have Y up, so they open lying on their back here (Z up).": "许多 CAD 程序的文件以 Y 为上轴,因此在此处打开时会平躺(Z 朝上)。",
"Filter": "筛选",
"Find in Browser": "在浏览器中查找",
"Finish": "完成",
"Flat Pattern": "展开图",
"Flat size": "平板尺寸",
"Follow camera (Look At sketches)": "跟随相机(注视草图)",
"Follow the camera (Look At sketches)": "跟随相机(注视草图)",
"Font": "字体",
"From Bodies": "从实体创建",
"From edges": "起始边",
"Full Length": "全长",
"Gap": "间隙",
"Grid": "网格",
"HISTORY": "历史",
"Height": "高度",
"Hidden edges": "隐藏线",
"Holes": "孔",
"Holes (edges on them)": "孔(孔上的边)",
"Home view": "主视图",
"Horiz./Vert.": "水平 / 垂直",
"IMAGES": "图像",
"Import…": "导入…",
"In This Design": "在此设计中",
"In place (surfaces)": "原位(曲面)",
"In plane": "在平面内",
"Inside": "内侧",
"Interferes": "发生干涉",
"Isocurve": "等参线",
"Issue title": "Issue 标题",
"JOINTS": "关节",
"Joint Origin1": "接头原点1",
"Keep (points on it)": "保留(其上的点)",
"Keep Tools": "保留工具",
"Keep of the other surface": "另一曲面保留的部分",
"LIBRARY": "库",
"LINKS": "链接",
"Later": "稍后",
"Leave it": "保持原样",
"Legacy face attachment. Rebinding to a certified face creates an exact attachment.": "旧版面附着。重新绑定到经验证的面可创建精确附着。",
"Length": "长度",
"Length units": "长度单位",
"Letter Spacing": "字间距",
"Library": "零件库",
"Library file": "库文件",
"Line Spacing": "行间距",
"Local library": "本地库",
"Loop": "循环",
"MANAGE": "管理",
"MATERIALS": "材料",
"MODEL": "模型",
"MOTION": "运动",
"Margin": "余量",
"Mass": "质量",
"Mass Center": "质心",
"Matched restrictions check the final values.": "满足条件的限制规则检查最终值。",
"Material": "材质",
"Max": "最大",
"Mid Radius": "中间半径",
"Middle double-click": "中键双击",
"Min": "最小",
"Mitre": "斜接",
"Model Parameters": "模型参数",
"Modeled": "已建模",
"More toolbar panels": "更多工具栏面板",
"Motion": "运动",
"Move / Copy": "移动 / 复制",
"Move Type": "移动类型",
"Move down": "下移",
"Move earlier": "向前移动",
"Move later": "向后移动",
"Move up": "上移",
"Name": "名称",
"Nearest": "最近",
"New": "新建",
"New Comp.": "新建组件",
"New Sketch": "新建草图",
"New rule…": "新建规则…",
"New study": "新建研究",
"No crash reports.": "没有崩溃报告。",
"No matching appearance presets.": "没有匹配的外观预设。",
"No matching appearances": "没有匹配的外观",
"No visible bodies to export.": "没有可导出的可见实体。",
"None": "无",
"Not available yet": "暂不可用",
"Notch": "缺口",
"OUTPUT": "输出",
"Opacity": "不透明度",
"Open GitHub draft": "打开 GitHub 草稿",
"Open local libraries in the desktop app. You can export this design's library here.": "请在桌面应用中打开本地库。您可以在此导出当前设计的库。",
"Open-source parametric 3D CAD in Rust. Licensed MIT OR Apache-2.0.": "使用 Rust 编写的开源参数化 3D CAD。基于 MIT OR Apache-2.0 许可。",
"Operator": "运算符",
"Other side": "另一侧",
"Other surface (mutual trim)": "另一曲面(相互修剪)",
"Outside": "外侧",
"Overall length": "总长",
"Param. Graph": "参数图",
"Parameter": "参数",
"Parts": "零件",
"Pass through": "通过点",
"Path": "路径",
"Pattern": "阵列",
"Per Edge": "每条边",
"Pick the tool bodies": "选择工具实体",
"Picked": "所选",
"Picked point": "选取的点",
"Place at the origin instead": "改为放置在原点",
"Plastic Rules": "塑料规则",
"Playback": "播放",
"Plot": "图表",
"Position": "位置",
"Position (0 to 1)": "位置(0 到 1)",
"Position (G0)": "位置 (G0)",
"Position along the edge, 0 at the start end, 1 at the other": "沿边的位置,起点端为 0,另一端为 1",
"Preferences › Design turns the offer back on": "可在 首选项 › 设计 中重新开启此提示",
"Preview Row": "预览行",
"Preview leaves the current design unchanged.": "预览不会更改当前设计。",
"Profiles/Curves": "轮廓/曲线",
"Quantity": "物理量",
"RECENT": "最近使用",
"REFERENCE": "参考",
"RULED SURFACE": "直纹曲面",
"RULES": "规则",
"Radius Fit": "半径拟合",
"Ratio": "比率",
"Reattach selected face": "重新附着所选面",
"Recover": "恢复",
"Recover unsaved design?": "恢复未保存的设计?",
"Rectangular": "矩形",
"Reference face": "参考面",
"Remove Tools": "移除工具",
"Remove from list": "从列表移除",
"Remove override": "移除覆盖",
"Remove private design details or paths before sharing.": "共享前请移除私密设计细节或路径。",
"Remove screenshot": "移除截图",
"Remove the column": "移除此列",
"Remove the track": "移除轨迹",
"Remove this point": "移除此点",
"Report a bug — review a screenshot and open a GitHub draft": "报告缺陷 — 复核截图并开启 GitHub 草稿",
"Reset Toolbar": "重置工具栏",
"Resize Part": "调整零件大小",
"Restore View": "恢复视图",
"Restore outer boundary": "恢复外边界",
"Restore the inherited component or physical material appearance": "还原继承的组件或物理材质外观",
"Result": "结果",
"Retake screenshot": "重新截图",
"Reverse": "反向",
"Reverse Direction": "反向",
"Revert": "还原",
"Revert All Positions": "还原所有位置",
"Revert Pos.": "还原位置",
"Revert Position": "恢复位置",
"Review the report and screenshot before opening GitHub.": "打开 GitHub 前请审阅报告和截图。",
"Rim Edge": "轮缘边",
"Roll History Marker Here": "将历史标记滚动到此处",
"Round": "圆角",
"Rule": "规则",
"Rule name": "规则名称",
"Rules run from top to bottom. Matched drives change effective values.": "规则从上到下依次运行。满足条件的驱动规则更改有效值。",
"SECTION": "剖面",
"SURFACE QUALITY": "曲面质量",
"Save Rule": "保存规则",
"Save View": "保存视图",
"Save the study as an animated GIF, seen as the viewport shows it": "按视口中的显示将研究保存为动画 GIF",
"Saved preview. Geometry is being checked before editing.": "已保存预览。编辑前正在检查几何。",
"Scale factor": "比例因子",
"Scene": "场景",
"Search": "搜索",
"Search commands": "搜索命令",
"Search this library": "搜索此库",
"Section": "剖面",
"Select Other: hold the left button still on the model (or right-click › Select Other…) to list everything under the cursor; click again on the same spot to select the next thing there. Double-click the middle button to go Home (Preferences › Navigation).": "“选择其他”:在模型上按住左键(或右键单击 › 选择其他…)列出光标下的所有对象;在同一位置再次单击可选择该处的下一个对象。双击中键转到主视图(首选项 › 导航)。",
"Select bodies (a face picks its body)": "选择实体(单击面即选择其所属实体)",
"Select bodies or faces instead": "改为选择实体或面",
"Selection filter": "选择筛选",
"Semantic faces share their appearance across instances.": "语义面在各实例间共享外观。",
"Send your report on GitHub": "在 GitHub 上发送报告",
"Shape": "形状",
"Sheet Rules": "钣金规则",
"Show Agent Cursor": "显示代理光标",
"Show in folder": "在文件夹中显示",
"Show the pointer an AI agent moves (#35)": "显示 AI 代理移动的指针(#35)",
"Signed axes": "带符号轴",
"Size": "大小",
"Sketch constraints": "草图约束",
"Sketch curves": "草图曲线",
"Sketch dimensions": "草图尺寸",
"Sketch geometry and profiles": "草图几何和轮廓",
"Sketch plane has no body-face attachment.": "草图平面没有实体面附着。",
"Sketch points": "草图点",
"Slot width": "槽宽",
"SolidCraft closed before these designs were saved. Their last autosave can be opened.": "SolidCraft 在这些设计保存前已关闭。可以打开它们的上次自动保存。",
"Specialise": "专用操作",
"Speed": "速度",
"Stand it up": "将其立起",
"Stand it up: a quarter turn about X, as one Move feature you can undo.": "将其立起:绕 X 轴旋转四分之一周,作为一个可撤销的移动特征。",
"Stand this part up?": "立起此零件?",
"Start bulge": "起始鼓度",
"Start continuity": "起始连续性",
"Step": "步骤",
"Steps": "步数",
"Stitch the kept pieces": "缝合保留的部分",
"Stitch to both bodies": "缝合到两个实体",
"Study": "研究",
"Style": "样式",
"Suppressed": "已抑制",
"Surface": "曲面",
"Swap Ends": "交换端点",
"TRIM": "修剪",
"Tangent (G1)": "相切 (G1)",
"Tangent Chain": "相切链",
"Tear": "撕裂",
"The dashed sketch is a saved plane guide. Select a new face to repair the attachment.": "虚线草图是已保存的平面引导。选择一个新面以修复附着。",
"The saved author occurrence is missing. Select a valid author placement before rebinding.": "保存的作者实例缺失。重新绑定前请选择有效的作者放置。",
"Then": "操作",
"These features will be deleted:": "以下特征将被删除:",
"These features will fail:": "以下特征将失败:",
"Thickness Outside": "外侧厚度",
"Thin": "薄壁",
"Thin Extrude": "薄壁拉伸",
"This child is shared. Deleting it removes it from every copy of its parent.": "此子项是共享的。删除它会从其父项的每个副本中移除。",
"This child is shared. Position changes apply to every copy of its parent.": "此子项是共享的。位置更改会应用到其父项的每个副本。",
"This face cannot provide a durable attachment. Choose another face or explicitly use a fixed plane.": "此面无法提供持久附着。请选择其他面或显式使用固定平面。",
"To Offset": "偏移",
"To edges": "终止边",
"Tolerance": "公差",
"Too close": "过近",
"Trimming tool (plane, face or curves)": "修剪工具(平面、面或曲线)",
"Turn off section analysis before exporting the view.": "请关闭截面分析后再导出视图。",
"Type": "类型",
"UNTRIM": "取消修剪",
"Unit": "单位",
"Updating the preview": "正在更新预览",
"Use active author placement": "使用活动作者放置",
"Use fixed plane": "使用固定平面",
"Use saved fixed plane": "使用已保存的固定平面",
"Use selected face as fixed plane": "使用所选面作为固定平面",
"User Parameters": "用户参数",
"VIEW": "视图",
"VIEWS": "视图",
"Value": "值",
"Velocity": "速度",
"Vertices": "顶点",
"View navigator": "视图导航器",
"Volume": "体积",
"Wall": "壁厚",
"Wall Location": "壁位置",
"Wall Thickness": "壁厚度",
"When": "条件",
"Width": "宽度",
"Will fail": "将失败",
"X angle": "X 角度",
"X distance": "X 距离",
"Y angle": "Y 角度",
"Y distance": "Y 距离",
"Z angle": "Z 角度",
"Z distance": "Z 距离",
"Zebra": "斑马纹",
"angle, height": "角度、高度",
"appearance.dielectric_ior": "电介质折射率",
"appearance.metallic": "金属度",
"appearance.pbr_help": "在渲染工作区或产品 PNG 中查看此表面。不支持折射或透射。",
"appearance.pbr_opaque": "不透明 PBR",
"appearance.roughness": "粗糙度",
"appearance.surface_response": "表面响应",
"browser.body_name": "实体{number}",
"browser.calibrate_title": "校准:{name}",
"browser.capture_many": "{count} 个组件已移动,但尚未捕获其位置。",
"browser.capture_note": "“捕获位置”保留新位置;“恢复位置”还原原先的位置。",
"browser.capture_one": "一个组件已移动,但尚未捕获其位置。",
"browser.component_name": "组件{number}",
"browser.edit_canvas_title": "编辑画布:{name}",
"browser.move_title": "移动:{name}",
"browser.parameters": "参数 ({count})",
"browser.precision": "精度: {precision}",
"browser.sketch_name": "草图{number}",
"browser.units": "单位: {units}",
"cam.flat": "平底",
"cam.follower": "从动件",
"cam.knife": "尖顶",
"cam.needs_joints": "需要一个旋转接头和一个滑动或摆动接头",
"cam.roller": "滚子",
"cam.roller_pick": "滚子(可选)",
"cam.tip_pick": "尖端(可选)",
"cmd.appearance_assign": "外观",
"cmd.appearance_library": "外观库",
"cmd.appearance_list": "列出外观",
"cmd.assembly_bom": "物料清单",
"cmd.body_rename": "重命名实体",
"cmd.browser_group": "新建组",
"cmd.browser_move": "移动浏览器项目",
"cmd.browser_order": "排列浏览器项目",
"cmd.browser_rename_group": "重命名组",
"cmd.browser_ungroup": "取消编组",
"cmd.browser_visibility": "显示/隐藏",
"cmd.canvas_calibrate": "校准画布",
"cmd.canvas_decal": "贴花",
"cmd.canvas_delete": "删除画布",
"cmd.canvas_edit": "编辑画布",
"cmd.canvas_insert": "画布",
"cmd.component_activate": "激活组件",
"cmd.component_break_link": "断开链接",
"cmd.component_capture_position": "捕获位置",
"cmd.component_create": "新建组件",
"cmd.component_delete": "删除组件",
"cmd.component_from_bodies": "由实体创建组件",
"cmd.component_insert_design": "插入设计",
"cmd.component_links": "列出链接",
"cmd.component_list": "列出组件",
"cmd.component_metadata": "零件属性",
"cmd.component_metadata_set": "更改零件属性",
"cmd.component_move_bodies": "将实体移至组件",
"cmd.component_move_sketches": "将草图移至组件",
"cmd.component_paste_new": "粘贴为新对象",
"cmd.component_properties": "组件物理属性",
"cmd.component_relink": "重新链接源文件",
"cmd.component_rename": "重命名组件",
"cmd.component_revert_position": "恢复位置",
"cmd.component_unlock": "解锁内容",
"cmd.component_update_links": "更新链接",
"cmd.config_activate": "激活配置",
"cmd.config_column": "配置列",
"cmd.config_configure": "配置",
"cmd.config_preview": "预览配置",
"cmd.config_row": "配置行",
"cmd.config_rule": "配置规则",
"cmd.config_rules": "配置规则",
"cmd.config_table": "显示配置表",
"cmd.construct_axis_edge": "过边的轴",
"cmd.construct_axis_normal_to_face": "垂直于面的轴",
"cmd.construct_axis_through_cylinder": "过圆柱/圆锥/圆环的轴",
"cmd.construct_axis_two_planes": "过两个平面的轴",
"cmd.construct_axis_two_points": "过两点的轴",
"cmd.construct_plane_along_path": "沿路径的平面",
"cmd.construct_plane_midplane": "中平面",
"cmd.construct_plane_perpendicular": "垂直平面",
"cmd.construct_plane_tangent": "相切平面",
"cmd.construct_plane_three_points": "过三点的平面",
"cmd.construct_plane_two_edges": "过两条边的平面",
"cmd.construct_point_along_path": "沿路径的点",
"cmd.construct_point_center": "圆/球/圆环中心的点",
"cmd.construct_point_edge_plane": "边与平面交点",
"cmd.construct_point_three_planes": "过三个平面的点",
"cmd.construct_point_two_edges": "过两条边的点",
"cmd.construct_point_vertex": "顶点处的点",
"cmd.contact_check": "检查接触",
"cmd.contact_create": "新建接触集",
"cmd.contact_disable_all": "禁用接触",
"cmd.contact_edit": "编辑接触集",
"cmd.contact_enable_all": "启用全部接触",
"cmd.contact_enable_sets": "启用接触集",
"cmd.contact_list": "列出接触集",
"cmd.diagnostics_crash_report": "崩溃报告",
"cmd.diagnostics_crash_reports": "崩溃报告",
"cmd.diagnostics_crash_reports_clear": "删除崩溃报告",
"cmd.diagnostics_crash_test": "崩溃测试",
"cmd.doc_recover": "恢复设计",
"cmd.doc_recovery_discard": "丢弃已恢复的设计",
"cmd.doc_recovery_list": "可恢复的设计",
"cmd.document_inspect": "检查设计",
"cmd.document_metadata": "设计属性",
"cmd.document_metadata_remove": "删除设计属性",
"cmd.document_metadata_set": "更改设计属性",
"cmd.document_units": "更改设计单位",
"cmd.edit_checkpoint": "检查点",
"cmd.edit_restore_checkpoint": "恢复检查点",
"cmd.engine_commands": "列出命令",
"cmd.engine_describe": "描述命令",
"cmd.explode_create": "爆炸图",
"cmd.explode_delete": "删除爆炸图",
"cmd.explode_list": "列出爆炸图",
"cmd.explode_show": "显示爆炸图",
"cmd.expr_evaluate": "计算表达式",
"cmd.face_delete": "删除面",
"cmd.file_export": "导出",
"cmd.file_insert_mesh": "插入网格",
"cmd.file_insert_step": "插入 STEP",
"cmd.file_save_mesh": "另存为网格",
"cmd.file_slicers": "已安装的切片软件",
"cmd.inspect_accessibility": "可达性分析",
"cmd.inspect_center_of_mass": "质心",
"cmd.inspect_clearance": "间隙",
"cmd.inspect_compare": "比较实体",
"cmd.inspect_continuity": "连续性分析",
"cmd.inspect_curvature_comb": "曲率梳分析",
"cmd.inspect_curvature_map": "曲率图分析",
"cmd.inspect_draft": "拔模分析",
"cmd.inspect_environment_map": "环境贴图分析",
"cmd.inspect_interference": "干涉",
"cmd.inspect_isocurve": "等参线分析",
"cmd.inspect_minimum_radius": "最小半径分析",
"cmd.inspect_silhouette": "轮廓",
"cmd.inspect_zebra": "斑马纹分析",
"cmd.joint_as_built": "现状接头",
"cmd.joint_cam": "凸轮",
"cmd.joint_create": "接头",
"cmd.joint_delete": "删除接头",
"cmd.joint_drive": "驱动接头",
"cmd.joint_edit": "编辑接头",
"cmd.joint_gear": "齿轮",
"cmd.joint_inspect": "检查接头",
"cmd.joint_limits": "接头限制",
"cmd.joint_list": "列出接头",
"cmd.joint_motion_link": "运动关联",
"cmd.joint_origin": "接头原点",
"cmd.joint_rack_pinion": "齿轮齿条",
"cmd.joint_reach": "到达点",
"cmd.joint_rigid_group": "刚性组",
"cmd.joint_screw": "螺旋",
"cmd.joint_solve": "解算接头",
"cmd.joint_sweep": "扫掠接头",
"cmd.library_apply": "应用本地库条目",
"cmd.library_export": "导出设计库",
"cmd.library_inspect": "检查本地库",
"cmd.material_assign": "物理材质",
"cmd.material_create": "新建物理材质",
"cmd.material_delete": "删除物理材质",
"cmd.material_edit": "编辑物理材质",
"cmd.material_list": "列出材质",
"cmd.material_properties_directional": "方向弹性模量",
"cmd.material_properties_validate": "验证物理材料数据",
"cmd.mesh_convert": "转换网格",
"cmd.model_edges": "列出边",
"cmd.model_faces": "列出面",
"cmd.model_threads": "列出螺纹",
"cmd.motion_delete": "删除运动研究",
"cmd.motion_export": "导出运动研究",
"cmd.motion_export_animation": "导出运动动画",
"cmd.motion_interference": "运动研究干涉",
"cmd.motion_list": "列出运动研究",
"cmd.motion_play": "播放运动研究",
"cmd.motion_plot": "运动研究图表",
"cmd.motion_study": "运动研究",
"cmd.motion_trace": "运动轨迹",
"cmd.motion_trace_keep": "保留运动轨迹",
"cmd.occurrence_copy": "粘贴(实例)",
"cmd.occurrence_ground": "固定",
"cmd.occurrence_move": "移动实例",
"cmd.occurrence_properties": "实例物理属性",
"cmd.parameters_add": "添加用户参数",
"cmd.parameters_change": "更改参数",
"cmd.parameters_comment": "注释参数",
"cmd.parameters_complete": "补全表达式",
"cmd.parameters_delete": "删除参数",
"cmd.parameters_export": "导出参数",
"cmd.parameters_favorite": "收藏参数",
"cmd.parameters_graph": "参数关系图",
"cmd.parameters_import": "导入参数",
"cmd.parameters_list": "列出参数",
"cmd.parameters_move": "移动参数",
"cmd.parameters_rename": "重命名参数",
"cmd.parameters_users": "参数使用者",
"cmd.parts_fastener": "插入紧固件",
"cmd.parts_insert": "插入零件",
"cmd.parts_library": "标准零件",
"cmd.parts_resize": "更改零件尺寸",
"cmd.plastic_assign_rule": "指定塑料规则",
"cmd.plastic_boss": "凸台",
"cmd.plastic_lip": "凸缘",
"cmd.plastic_manage_rules": "管理塑料规则",
"cmd.plastic_rest": "垫块",
"cmd.plastic_rules": "列出塑料规则",
"cmd.plastic_snap_fit": "卡扣",
"cmd.render_backends": "渲染后端",
"cmd.render_cancel": "取消渲染",
"cmd.render_export": "导出 PNG",
"cmd.render_preflight": "检查渲染请求",
"cmd.render_scene": "检查渲染场景",
"cmd.render_settings_apply": "应用渲染相机",
"cmd.render_settings_get": "渲染设置",
"cmd.render_settings_set": "保存渲染设置",
"cmd.render_start": "渲染图像",
"cmd.render_status": "渲染进度",
"cmd.select_clear": "清除选择",
"cmd.sheet_convert": "转换为钣金",
"cmd.sheet_export_bend_table": "导出折弯表",
"cmd.sheet_export_dxf": "将展开图导出为 DXF",
"cmd.sheet_flange": "法兰",
"cmd.sheet_flat_pattern": "创建展开图",
"cmd.sheet_fold": "折叠",
"cmd.sheet_hem": "卷边",
"cmd.sheet_manage_rules": "钣金规则",
"cmd.sheet_perforate": "冲孔",
"cmd.sheet_refold": "重新折弯",
"cmd.sheet_rules": "列出钣金规则",
"cmd.sheet_unfold": "展开",
"cmd.sketch_arc_center_point": "中心点圆弧",
"cmd.sketch_arc_tangent": "相切圆弧",
"cmd.sketch_arc_three_point": "三点圆弧",
"cmd.sketch_auto_constrain": "自动约束",
"cmd.sketch_auto_constrain_from_datum": "基于基准自动约束",
"cmd.sketch_auto_project": "自动投影边到参考",
"cmd.sketch_blend_curve": "混合曲线",
"cmd.sketch_chain": "连续链",
"cmd.sketch_chamfer_distance_angle": "距离和角度倒角",
"cmd.sketch_chamfer_equal_distance": "等距倒角",
"cmd.sketch_chamfer_two_distance": "双距离倒角",
"cmd.sketch_circle_center": "圆心直径圆",
"cmd.sketch_circle_three_point": "三点圆",
"cmd.sketch_circle_three_tangent": "三切线圆",
"cmd.sketch_circle_two_point": "两点圆",
"cmd.sketch_circle_two_tangent": "两切线圆",
"cmd.sketch_constrainer": "草图约束器",
"cmd.sketch_constraint_fix": "固定/解除固定",
"cmd.sketch_constraint_midpoint": "中点",
"cmd.sketch_construction": "普通/构造",
"cmd.sketch_copy": "复制草图图元",
"cmd.sketch_cut": "剪切草图图元",
"cmd.sketch_delete": "删除草图图元",
"cmd.sketch_dimension_text": "移动尺寸文字",
"cmd.sketch_drag": "拖动草图几何",
"cmd.sketch_drag_end": "结束草图拖动",
"cmd.sketch_draw_dimensioned": "绘制带尺寸的草图图元",
"cmd.sketch_edit": "编辑草图",
"cmd.sketch_edit_text": "编辑文字",
"cmd.sketch_export_dxf": "另存为 DXF",
"cmd.sketch_finish_auto_constrain": "使用自动约束完成",
"cmd.sketch_fit_curves_to_section": "将曲线拟合到网格截面",
"cmd.sketch_glyphs": "约束符号",
"cmd.sketch_include_3d": "包含三维几何",
"cmd.sketch_infinite": "无限长直线",
"cmd.sketch_insert_dxf": "插入 DXF",
"cmd.sketch_insert_svg": "插入 SVG",
"cmd.sketch_inspect": "检查草图",
"cmd.sketch_intersection_curve": "相交曲线",
"cmd.sketch_isoparametric_curve": "等参数曲线",
"cmd.sketch_line3d": "三维直线",
"cmd.sketch_line_midpoint": "中点线",
"cmd.sketch_loose_ends": "松散端点",
"cmd.sketch_loose_ends_tie": "约束松散端点",
"cmd.sketch_move": "移动/复制草图图元",
"cmd.sketch_move3d": "移动三维点",
"cmd.sketch_move_point": "拖动草图点",
"cmd.sketch_offset_break": "断开偏移关联",
"cmd.sketch_options": "草图选项板选项",
"cmd.sketch_paste": "粘贴草图图元",
"cmd.sketch_point3d": "三维点",
"cmd.sketch_polygon_circumscribed": "外切多边形",
"cmd.sketch_polygon_edge": "边长多边形",
"cmd.sketch_polygon_inscribed": "内接多边形",
"cmd.sketch_project_to_surface": "投影到曲面",
"cmd.sketch_rectangle_center": "中心矩形",
"cmd.sketch_rectangle_rounded": "圆角矩形",
"cmd.sketch_rectangle_three_point": "三点矩形",
"cmd.sketch_rectangle_two_point": "两点矩形",
"cmd.sketch_redefine": "重定义草图平面",
"cmd.sketch_slot_arc_center": "中心点圆弧槽",
"cmd.sketch_slot_arc_three_point": "三点圆弧槽",
"cmd.sketch_slot_center_point": "中心点槽",
"cmd.sketch_slot_center_to_center": "中心距槽",
"cmd.sketch_slot_overall": "全长槽",
"cmd.sketch_snap": "捕捉推断",
"cmd.sketch_solve": "解算草图",
"cmd.sketch_spline3d": "三维样条曲线",
"cmd.sketch_spline_control_point": "控制点样条曲线",
"cmd.sketch_spline_control_point_5": "控制点样条曲线(5 次)",
"cmd.sketch_spline_fit_point": "拟合点样条曲线",
"cmd.sketch_spun_profile": "旋转轮廓",
"cmd.sketch_toggle_driven": "切换被驱动尺寸",
"cmd.sketch_trim_path": "沿路径修剪",
"cmd.solid_align": "对齐",
"cmd.solid_boundary_fill": "边界填充",
"cmd.solid_bounding_solid": "包围实体",
"cmd.solid_emboss": "压印",
"cmd.solid_move": "移动/复制",
"cmd.solid_offset_face": "偏移面",
"cmd.solid_press_pull": "按压拖动",
"cmd.solid_remove": "移除",
"cmd.solid_replace_face": "替换面",
"cmd.solid_rib": "筋板",
"cmd.solid_split_face": "拆分面",
"cmd.solid_web": "网格筋",
"cmd.surface_blend": "混合曲面",
"cmd.surface_boundary": "边界曲面",
"cmd.surface_extrude": "曲面拉伸",
"cmd.surface_fair": "曲面光顺",
"cmd.surface_fillet": "曲面圆角",
"cmd.surface_loft": "曲面放样",
"cmd.surface_match": "曲面匹配",
"cmd.surface_offset": "偏移曲面",
"cmd.surface_patch": "补面",
"cmd.surface_reverse_normal": "反转法向",
"cmd.surface_revolve": "曲面旋转",
"cmd.surface_ruled": "直纹曲面",
"cmd.surface_stitch": "缝合",
"cmd.surface_sweep": "曲面扫掠",
"cmd.surface_thicken": "加厚",
"cmd.surface_unstitch": "取消缝合",
"cmd.surface_untrim": "取消修剪",
"cmd.timeline_add": "添加记录的特征",
"cmd.timeline_compute_all": "全部重新計算",
"cmd.timeline_copy": "复制特征",
"cmd.timeline_dependents": "特征依存项",
"cmd.timeline_export_script": "导出命令脚本",
"cmd.timeline_inspect": "检查特征",
"cmd.timeline_paste": "粘贴特征",
"cmd.timeline_redefine": "编辑特征",
"cmd.timeline_rename": "重命名",
"cmd.timeline_reorder": "重排特征",
"cmd.timeline_roll_to": "滚动历史标记",
"cmd.timeline_rollback": "移动时间线标记",
"cmd.timeline_suppress": "抑制特征",
"cmd.view_ambient_occlusion": "环境光遮蔽",
"cmd.view_apply": "还原命名视图",
"cmd.view_delete": "删除命名视图",
"cmd.view_graphics_preset": "图形预设",
"cmd.view_list": "列出命名视图",
"cmd.view_navigate": "导航视图",
"cmd.view_rename": "重命名命名视图",
"cmd.view_save": "新建命名视图",
"color.copy": "单击复制颜色值",
"color.edit": "单击编辑颜色",
"color.gamma": "以 0–255 伽马空间显示颜色值",
"color.hue": "色相",
"color.linear": "以 0–1 线性空间显示颜色值",
"color.saturation_value": "饱和度和明度",
"color.selected": "所选颜色",
"contact.components_count": "{count} 个组件",
"contact.enabled_label": "已启用",
"coupling.gear_1": "齿轮 1",
"coupling.gear_1_pick": "齿轮 1(可选)",
"coupling.gear_2": "齿轮 2",
"coupling.gear_2_pick": "齿轮 2(可选)",
"coupling.internal": "内齿轮",
"coupling.needs_turn_and_slide": "需要一个旋转接头和一个滑动接头",
"coupling.needs_turns": "需要两个旋转接头",
"coupling.not_round": "不是圆柱面",
"coupling.nut": "螺母",
"coupling.picked": "已拾取",
"coupling.pinion": "小齿轮",
"coupling.pinion_pick": "小齿轮(可选)",
"coupling.pitch": "螺距",
"coupling.rack": "齿条",
"coupling.radius_1": "半径 1",
"coupling.radius_2": "半径 2",
"crash.announce": "SolidCraft 上次意外关闭或发生了内部错误。崩溃报告已保存(帮助 > 崩溃报告…)。",
"crash.copy_folder": "复制文件夹路径",
"crash.copy_path": "复制路径",
"crash.deleted": "已删除 {count} 份报告。",
"crash.detected_time": "检测时间:{time} UTC",
"crash.intro": "崩溃报告保存在此计算机上,不会发送到任何地方。“报告…”会打开草稿,供您在分享前检查。",
"crash.kind_command": "命令内部错误",
"crash.kind_internal": "内部错误",
"crash.kind_kernel": "内核错误(已恢复)",
"crash.kind_unclean": "意外关闭",
"crash.previous_session": "较早的 SolidCraft 会话意外结束或发生了内部错误。未正常结束的会话会在启动时被检测到。详情请参阅 帮助 > 崩溃报告…。",
"crash.replayable": "可重放",
"crash.report": "报告…",
"crash.unclean_explanation": "在后续启动时检测到;未记录确切的退出时间。系统关机或强制停止也可能导致会话未正常结束。",
"delete.and_more": "…以及另外 {count} 项",
"dialog.bodies_count": "{count} 个实体",
"dialog.clearance_invalid": "间隙必须是 0 或更大的长度",
"dialog.compute": "计算",
"dialog.compute_again": "重新计算",
"dialog.computing": "正在计算… {seconds} 秒",
"dialog.could_not_be_checked": "无法检查",
"dialog.custom_axis": "↖ 自定义轴",
"dialog.dimension_insert_hint": "单击其他驱动尺寸以插入其名称",
"dialog.dimension_name": "尺寸:{name}",
"dialog.edit_title": "编辑 {title}",
"dialog.select": "↖ 选择",
"dialog.selected_count": "↖ 已选择 {count} 个",
"dialog.selection_guidance": "选择输入项进行修改。点击已选对象可取消选择;按住 Ctrl/Cmd 点击也可切换选择。检查预览后,再按“确定”。",
"dialog.selection_step": "第 {step} 步,共 {total} 步:选择{input}",
"dialog.step": "步骤",
"document.save_changes": "保存对 {name} 的更改?",
"document.unsaved_changes": "{name} 有未保存的更改。如果不保存,将丢失这些更改。",
"drive.stopped_by_contact": "停在 {value}:{a} 会穿过 {b}",
"drive.stopped_by_loop": "停在 {value}:经过 {joint} 的环路无法再闭合",
"drive.unconnected": "没有任何移动:{part} 未连接到任何固定的零部件",
"dxf.cancel_wait": "正在等待导出停止…",
"dxf.cancelled": "DXF 导出已取消",
"dxf.cancelling": "正在取消 DXF 导出",
"dxf.exporting": "正在导出 DXF",
"dxf.invalid_tolerance": "曲线公差必须介于 0.0001 和 1 mm 之间。",
"dxf.progress.index": "正在准备曲面 (2/5)",
"dxf.progress.meshes": "正在准备网格 (1/5)",
"dxf.progress.occlusion": "正在判定隐藏线 (4/5)",
"dxf.progress.projection": "正在投影几何体 (3/5)",
"dxf.progress.write": "正在写入 DXF (5/5)",
"dxf.tolerance": "曲线公差",
"dxf.tolerance_help": "仅导出可见实体。曲线使用直线段近似。公差越小,曲线越精细,但需要更多时间和内存。",
"file_load.built": "已构建:{built}/{total} 个特征。",
"file_load.converting": "正在转换实体 {done}/{total}",
"file_load.inserting": "正在插入几何体",
"file_load.opening": "正在打开设计",
"file_load.preparing_thumbnail": "正在准备缩略图...",
"file_load.preparing_view": "正在准备视图...",
"file_load.preview_note": "这是已保存的预览。正在检查几何体,完成后即可编辑。",
"file_load.reading": "正在读取文件...",
"file_load.reading_percent": "正在读取文件... {percent}%",
"file_load.rebuilding": "正在重建特征 {done}/{total}",
"file_load.recovering": "正在恢复设计",
"file_load.stopping": "正在等待上一次操作停止...",
"file_load.waiting": "正在等待文件操作",
"fits the face, e.g. M8": "适配该面,例如 M8",
"from the rule": "来自规则",
"help.apache": "Apache 许可证 2.0",
"help.attributions": "署名信息 (ATTRIBUTION.md)",
"help.build": "版本 {version} · 提交 {commit} · 构建日期 {date}",
"help.font_details": "界面使用 egui 的内置字体(Ubuntu Light 和 Hack,采用 Ubuntu Font Licence 和 MIT/Bitstream Vera 许可证;Noto Emoji 和表情图标字体,采用 OFL 和 MIT 许可证)。草图文本使用 Liberation Sans(SIL OFL 1.1)。The Crafting Apps 的可选字体包 craft-fonts(BIZ UDPGothic、Shippori Mincho、BIZ UDMincho、Noto Sans CJK SC、Noto Sans Arabic;SIL OFL 1.1)未随 SolidCraft 构建版本捆绑提供。",
"help.fonts": "字体",
"help.licences": "许可证",
"help.mit": "MIT 许可证",
"help.notice": "NOTICE",
"help.solid.chamfer": "用指定的距离在所选边上切出一个平直的斜面。用于去除锐边,或使销钉、螺钉更容易插入。",
"help.solid.extrude": "将草图轮廓按指定距离拉伸为三维形体,可以增加或去除材料。用于把平面轮廓变成方块、凸台或凹槽。",
"help.solid.fillet": "用指定半径的平滑圆弧将所选的边倒圆。用于出于强度、手感或外观的考虑而柔化锐边。",
"help.solid.hole": "在面上的指定位置钻出指定直径的圆孔。用于螺钉过孔、销孔等简单的圆形开口。",
"help.solid.revolve": "将草图轮廓绕一条轴旋转,生成圆形的实体。用于轴、旋钮、碗等围绕中心线呈圆形的零件。",
"help.solid.shell": "将实体掏空,留下指定厚度的壁,还可以打开所选的面。用于盒子、盖子等薄壁零件。",
"help.third_party": "第三方许可证",
"home.documentation": "文档",
"home.in_this_browser": "在此浏览器中",
"home.missing": "文件不存在",
"home.open": "打开…",
"home.opened_days_ago": "{count} 天前打开",
"home.opened_hours_ago": "{count} 小时前打开",
"home.opened_just_now": "刚刚打开",
"home.opened_minutes_ago": "{count} 分钟前打开",
"home.opening": "正在打开…",
"home.recent": "最近使用",
"home.report_issue": "报告问题",
"home.samples": "示例",
"home.whats_new": "新功能",
"install.button_tip": "将 SolidCraft 安装为应用:在独立窗口中打开,离线也能使用",
"install.dock_1": "选择“文件”›“添加到程序坞”。",
"install.dock_2": "点按“添加”。",
"install.dock_after": "之后 SolidCraft 从程序坞在独立窗口中打开,离线也能使用。",
"install.done": "完成",
"install.home_screen_1": "轻点“共享”(若不在工具栏上,则在 … 菜单中)。",
"install.home_screen_2": "选择“添加到主屏幕”。",
"install.home_screen_3": "轻点“添加”。",
"install.home_screen_after": "之后 SolidCraft 从主屏幕上的图标打开,不显示 Safari 的工具栏,离线也能使用。",
"install.menu": "安装应用…",
"install.steps_intro": "Safari 通过自身的菜单安装网页应用:",
"install.title": "安装 SolidCraft",
"issue.body_label": "报告正文",
"issue.note_image_copied": "请将图片粘贴到 GitHub 草稿中。如果无法复制图片,请保存 PNG。",
"issue.note_opened": "请检查 GitHub 草稿并附上截图。点击 GitHub 的 Submit new issue 按钮即可发布。",
"issue.note_opened_copied": "报告已复制。请粘贴到 GitHub 草稿中,附上截图,然后在 GitHub 上点击 Submit new issue。",
"issue.note_removed": "已从此草稿中移除截图。",
"issue.note_report_copied": "报告已复制。如有需要,请将其粘贴到 GitHub 草稿中。",
"issue.note_save_failed": "无法保存截图:{error}",
"issue.note_saved": "截图已保存。请在 GitHub 草稿中附上 PNG。",
"issue.save_screenshot": "保存截图…",
"joint.from_bodies_hint": "每个所选实体移入各自的新组件,位置保持不变。",
"joint.one_body": "两次选择都在 {body} 上。请在另一个零件上选择第二个。",
"joint.one_component": "这些零件是同一组件的实体:{bodies}。接头使一个组件相对另一个组件运动,因此每个零件都需要自己的组件。",
"keymap.command_id": "命令 ID",
"keymap.empty": "没有匹配的命令",
"keymap.use_anyway": "仍在此处使用 {key}",
"manage.appearance_hint": "为所选对象选择外观,或将色样拖到实体或面上。",
"manage.assign_hint": "选择实体并指定其塑料设计规则。",
"manage.config_hint": "编辑配置行、列和规则,然后激活或预览某一行。",
"manage.empty": "没有匹配的行。",
"manage.material_hint": "选择实体并指定其物理材质。",
"manage.parameters_hint": "编辑表达式和单位。按 Enter 或离开字段时应用更改。",
"manage.rules_hint": "选择要编辑的规则,或创建新规则。确认以保存规则。",
"measure.at": "位置",
"measure.item": "项目 {number}",
"messages.ago_h": "{n} 小时前",
"messages.ago_min": "{n} 分钟前",
"messages.ago_s": "{n} 秒前",
"messages.chip_hint": "点击查看本次会话的所有消息",
"messages.clear": "清除",
"messages.copy_all": "全部复制",
"messages.menu": "消息…",
"messages.none": "暂无消息。",
"messages.title": "消息",
"motion.checked_to": "仅检查到第 {step} 步:检查已用完其工作量上限",
"motion.collision": "{a} · {b}:第 {steps} 步",
"motion.delete_key": "删除关键帧",
"motion.duration_hint": "秒(留空:按步)",
"motion.key_here": "在此添加关键帧",
"motion.key_here_hint": "在此步骤添加关键帧,使用关节的当前值",
"motion.no_collisions": "整个研究中没有碰撞",
"motion.step_back": "上一步",
"motion.step_forward": "下一步",
"motion.to_end": "到结尾",
"motion.to_start": "到开头",
"motion.track_name": "轨道 {number}",
"nav.touchpad.help": "按住 Shift 并移动指针可平移;按住 Alt/Option 并移动可旋转。无需按鼠标按钮。垂直滚动可缩放。",
"nav.touchpad.label": "触控板",
"nav.touchpad.orbit": "旋转(按住 Alt/Option 并移动,无需鼠标按钮)",
"nav.touchpad.pan": "平移(按住 Shift 并移动,无需鼠标按钮)",
"nav.touchpad.scroll": "触控板使用垂直滚动进行缩放。双指平移设置将保留供其他预设使用。",
"nav.touchpad.zoom": "缩放(垂直滚动或双指捏合)",
"needs two joints": "需要两个接头",
"new configuration": "新配置",
"new parameter": "新参数",
"no hole": "无孔",
"no interference": "无干涉",
"no joint that moves yet": "尚无运动接头",
"no picture": "无图片",
"none": "无",
"parts.automatic_name": "自动",
"pattern.alignment_2": "对齐 2",
"pattern.alignment_hint": "数量包含原始图形。居中时副本分布在两侧;数量为偶数时,反转可切换多一个副本的一侧。",
"pattern.direction_1": "方向 1",
"pattern.direction_2": "方向 2",
"pattern.flip_direction": "反转方向",
"pick a hole to seat it, or OK places it at the origin": "选择一个孔放置,或单击确定放置在原点",
"pick one or two vertices, edges or faces": "选择一个或两个顶点、边或面",
"prefs.cpu": "CPU(软件)",
"prefs.minutes_suffix": " min",
"properties.title": "属性:{name}",
"recovery.days_ago": "{count} 天前",
"recovery.detail": "{file} · {features} 个特征 · 自动保存于 {when}",
"recovery.hours_ago": "{count} 小时前",
"recovery.just_now": "刚刚",
"recovery.min_ago": "{count} 分钟前",
"recovery.never_saved": "从未保存",
"render.background": "场景背景",
"render.fit": "适配产品视图",
"render.image_cancelled": "渲染已取消",
"render.image_cancelling": "正在取消",
"render.image_completed": "图像可导出",
"render.image_encoding": "正在编码 PNG",
"render.image_export": "导出 PNG",
"render.image_failed": "渲染失败",
"render.image_height": "高度",
"render.image_help": "CPU 预览图像 · PNG · 近似透明度",
"render.image_overwrite": "替换现有文件",
"render.image_preparing": "正在准备图像",
"render.image_queued": "等待渲染",
"render.image_reduce": "请尝试更小的图像或更简单的场景。",
"render.image_running": "正在渲染图像",
"render.image_stale": "此图像使用后续更改之前捕获的场景。",
"render.image_start": "开始渲染",
"render.image_supported": "支持此渲染请求;开始时将再次检查队列和内存池。",
"render.image_title": "渲染图像",
"render.image_too_large": "超出图像限制:每边 4096 像素,总计 4,194,304 像素。",
"render.image_transparent": "透明背景",
"render.image_unknown": "渲染状态不可用",
"render.image_use_largest": "使用此宽高比下的最大尺寸:",
"render.image_width": "宽度",
"render.navigation_help": "相机的操作与设计中相同(首选项 › 导航)。保存设置会记录当前相机。",
"render.opaque_image_summary": "预览 PNG · 不透明 PBR · 混合透明",
"render.opaque_preview_help": "不透明 PBR 和纯色;透明效果使用混合。不支持折射、HDRI 和最终渲染。",
"render.perspective": "透视相机",
"render.preview": "集成预览",
"render.preview_help": "光栅着色和混合透明度。暂不支持折射、HDRI 和最终渲染。",
"render.reload_settings": "重新加载已保存设置",
"render.restore_camera": "恢复已保存相机",
"render.return_design": "返回设计",
"render.save_setup": "保存设置",
"render.setup_name": "设置名称",
"render.unavailable_preview": "此设置请求了不可用的预览配置。",
"render.unsaved": "未保存的预览更改",
"render.use_preview": "使用集成预览",
"sample.bracket.about": "基于 2 mm 钣金规则的基础法兰、边线法兰和卷边",
"sample.bracket.name": "钣金支架",
"sample.enclosure.about": "带凸缘、螺钉凸台、垫块和卡扣的抽壳长方体",
"sample.enclosure.name": "塑料外壳",
"sample.flange.about": "带有由参数驱动的圆形阵列的轮毂和法兰",
"sample.flange.name": "螺栓法兰",
"sample.hinge.about": "两个组件和一个旋转接头,驱动到 60°",
"sample.hinge.name": "铰链装配体",
"sample.plate.about": "带圆角、孔和镗孔凸台的参数化板",
"sample.plate.name": "示例板",
"sample.vents.about": "按矩形阵列排列的槽:行数、列数和间距均为参数",
"sample.vents.name": "通风板",
"search.command_keys": "Enter 运行 Shift+Enter 运行并保持打开 Esc 关闭",
"search.commands": "命令",
"search.design": "此设计中",
"search.feature": "特征",
"search.invalid": "无效",
"search.keys": "↑ ↓ 选择 Enter 运行 Tab 补全名称 Esc 关闭",
"search.no_match": "没有与“{query}”匹配的命令",
"search.parameter": "参数",
"search.recent": "最近使用",
"search.run": "运行命令",
"search.suggest": "您是否想找 {label}?",
"search.try": "输入命令名称、此设计中的特征或参数。要带值运行命令,请输入其ID和JSON对象:{example}",
"search.valid": "有效",
"settings.display_quality_note": "级别越精细,曲面和边显示越平滑,但网格生成耗时更长。只影响视口,不影响设计或导出。",
"settings.frame_rate_note": "在视图右下角显示每秒帧数。开启时视图会持续重绘。",
"settings.measure_axis_distances": "显示 X/Y/Z 距离",
"settings.measure_axis_distances_help": "测量对话框打开时,在总距离之外显示沿世界坐标轴方向的尺寸线和距离。",
"settings.msaa_applies_on_restart": "抗锯齿将在下次启动 SolidCraft 时生效",
"settings.msaa_reset": "{setting}: {requested}× 不受此图形设备支持;已重置为 {reset}× (支持: {supported})。",
"settings.msaa_unsupported": "此图形设备不支持",
"settings.reset_intro": "这些设置在此计算机上无法正常工作,会导致 SolidCraft 无法启动,因此已更改:",
"settings.reset_title": "设置已更改",
"settings.supersampling_note": "以更高分辨率绘制视图再缩小:在低于 4K 的屏幕上边、线和网格更平滑。会消耗 GPU 时间:1.5× 时约 2.25 倍像素,2× 时 4 倍。",
"shortcut.json_error": "参数必须采用 JSON 格式:{error}",
"shortcut.no_command": "没有命令 `{id}`;JSON 前的文本必须是命令 ID",
"shortcut.pin": "固定到 S 框顶部",
"shortcut.unpin": "取消固定",
"sketch.degrees_of_freedom": "{count} 个自由度",
"sketch.dof_left": "剩余 {count} 个自由度",
"sketch.dof_left_one": "剩余 {count} 个自由度",
"sketch.draw_curves": "绘制为 {linetype}",
"sketch.make_selection": "将选择转换为 {linetype}",
"sketch.open_ends": "开放 {count}",
"sketch.untied_ends": "未约束 {count}",
"sketch_panel.attached": "附着到 {body} / {path}",
"sketch_panel.author": "创建时的放置:{path}",
"sketch_panel.dimension_hint": "输入数值或表达式,然后按“确定”。",
"sketch_panel.move_hint": "输入距离和角度,然后按“确定”。",
"sketch_panel.redefine_title": "{command}:{name}",
"sketch_panel.sheet_attachment": "附着到钣金实体的平面上;钣金变化时会跟随该面板。",
"sketch_panel.text_hint": "编辑文字及其位置,然后按“确定”。",
"sketch_panel.use_plane": "使用 {plane} 平面",
"sketch_text.align_center": "居中",
"sketch_text.align_left": "左对齐",
"sketch_text.align_right": "右对齐",
"sketch_text.bold": "粗体",
"sketch_text.builtin_font": "{family}(内置)",
"sketch_text.italic": "斜体",
"sketch_text.loading_fonts": "正在查找已安装字体…",
"sketch_text.on_path": "文字沿路径排列:由曲线放置",
"sketch_text.path_clear": "将文字移离其曲线",
"sketch_text.path_hint": "文字所跟随的草图曲线:先单击此处,再选择曲线",
"sketch_text.use_font_file": "使用字体文件 {path}",
"solid": "实心",
"the parts library is not available": "零件库不可用",
"thread.automatic_size": "自动尺寸",
"thread.designation": "螺纹标记",
"thread.iso_metric": "ISO 公制",
"thread.select_size": "选择尺寸",
"timeline.group": "新建特征文件夹",
"timeline.move_many": "移动时间线项目",
"timeline.move_to_group": "将特征移至文件夹",
"timeline.rename_group": "重命名特征文件夹",
"timeline.reorder_many": "特征重新排序",
"timeline.ungroup": "移除特征文件夹",
"to the face": "到面",
"to the next face": "到下一个面",
"toolbar.customize_note": "{tab} 选项卡。勾选命令可将其按钮添加到工具栏。您也可以将面板下拉菜单中的某一行拖到工具栏,将按钮拖出工具栏以移除,或使用下拉菜单行中的固定图标。",
"toolbar.image": "图像",
"toolbar.render": "渲染",
"toolbar.render_scene": "场景",
"trace.points": "路径上的 {count} 个点",
"trace.stopped_by_contact": "在采样 {sample} 处结束:{a} 会穿过 {b}",
"trace.stopped_by_loop": "在采样 {sample} 处结束:经过 {joint} 的环路无法再闭合",
"ui.1_degree_of_freedom": "1 个自由度",
"ui.3d_mouse_speed": "3D 鼠标速度",
"ui.3d_sketch": "3D 草图",
"ui.activate": "激活",
"ui.active_component": "活动组件",
"ui.add_configuration": "添加配置",
"ui.add_parameter": "添加参数",
"ui.agent_chat": "智能体聊天",
"ui.agent_chat_add": "附加文件",
"ui.agent_chat_add_file": "选择文件…",
"ui.agent_chat_allow": "允许",
"ui.agent_chat_allowed": "已允许",
"ui.agent_chat_answered": "回答:{option}",
"ui.agent_chat_approval": "允许智能体执行此操作吗?",
"ui.agent_chat_attach_view": "附加视图",
"ui.agent_chat_attach_view_tip": "随消息发送当前视图的图片",
"ui.agent_chat_attachable": "图片、PDF、文本和 CAD 文件",
"ui.agent_chat_auth_agent": "使用 {name} 登录",
"ui.agent_chat_auth_env": "请在环境中设置 {vars},然后重启 SolidCraft。",
"ui.agent_chat_auth_needed": "智能体要求你登录。登录在智能体本身完成;SolidCraft 从不接触你的密码或密钥。",
"ui.agent_chat_auth_none": "该智能体未在此提供登录方式:请按照它自己的文档登录。",
"ui.agent_chat_auth_retry": "我已登录:重新连接",
"ui.agent_chat_auth_terminal": "在终端中运行以下命令,然后再次点击连接:",
"ui.agent_chat_auth_title": "登录智能体",
"ui.agent_chat_cancel": "取消",
"ui.agent_chat_changes": "{n} 项更改,一步撤销",
"ui.agent_chat_changes_of": "更改 {n}/{limit}",
"ui.agent_chat_close": "关闭",
"ui.agent_chat_command": "智能体命令",
"ui.agent_chat_connect": "连接",
"ui.agent_chat_copy": "复制",
"ui.agent_chat_custom_hint": "任何通过标准输入输出使用 Agent Client Protocol 的程序。不经过 shell 运行。",
"ui.agent_chat_denied": "已拒绝",
"ui.agent_chat_deny": "拒绝",
"ui.agent_chat_desktop_only": "智能体聊天需要桌面应用。",
"ui.agent_chat_detecting": "正在查找智能体…",
"ui.agent_chat_dock": "停靠到侧面板",
"ui.agent_chat_dock_left": "停靠在左侧",
"ui.agent_chat_dock_right": "停靠在右侧",
"ui.agent_chat_drop_hint": "拖放到此处,附加到下一条消息",
"ui.agent_chat_edit": "编辑",
"ui.agent_chat_exited": "智能体已停止。",
"ui.agent_chat_failed_start": "智能体无法启动:{error}",
"ui.agent_chat_file_cad_not_read": "{name}:CAD 文件会导入设计,而不是读取",
"ui.agent_chat_file_empty_picture": "{name}:空图片",
"ui.agent_chat_file_error": "{name}:{error}",
"ui.agent_chat_file_heic": "{name}:这里无法读取 HEIC 图片;请先导出为 JPEG 或 PNG",
"ui.agent_chat_file_importing": "正在导入设计…",
"ui.agent_chat_file_kinds": "{name}:可以附加图片(PNG、JPEG、GIF、WebP、BMP、TIFF)、文本文件(包括 SVG)和 CAD 文件(STEP、IGES、FreeCAD、Rhino、STL、3MF、OBJ、glTF)",
"ui.agent_chat_file_loading": "正在读取文件…",
"ui.agent_chat_file_not_a_file": "{name}:不是文件",
"ui.agent_chat_file_not_a_picture": "{name}:不是图片",
"ui.agent_chat_file_not_utf8": "{name}:不是 UTF-8 文本",
"ui.agent_chat_file_picture_too_big": "{name}:图片最大 {max} MB",
"ui.agent_chat_file_text_too_big": "{name}:文本文件最大 {max} KB",
"ui.agent_chat_file_too_large": "{name}:太大",
"ui.agent_chat_file_too_large_to_send": "{name}:即使缩小也太大,无法发送",
"ui.agent_chat_file_unreadable_picture": "{name}:无法读取的图片",
"ui.agent_chat_files": "文件:{files}",
"ui.agent_chat_files_left_out": "一条消息最多发送 {max} 个文件;未发送:{files}",
"ui.agent_chat_files_loading": "正在等待文件读取完成",
"ui.agent_chat_files_max": "一条消息最多附加 {max} 个文件",
"ui.agent_chat_import_failed": "{name}:导入失败:{error}",
"ui.agent_chat_intro": "与你已在使用的编程智能体或你选择的模型端点聊天。它通过 SolidCraft 的工具处理打开的设计:更改即时显示,每条消息的更改可一步撤销。无需询问即可执行的范围在“首选项 > AI”中设置。",
"ui.agent_chat_key_in_env": "已设置密钥",
"ui.agent_chat_left": "左侧",
"ui.agent_chat_limit": "智能体已达到每条消息 {limit} 项更改的上限。再发送一条消息可让它继续。",
"ui.agent_chat_minimize": "最小化为细条",
"ui.agent_chat_model_tip": "智能体使用的模型。你的选择会为此智能体记住。",
"ui.agent_chat_new": "新对话",
"ui.agent_chat_new_confirm": "开始新对话?当前对话将被清除。",
"ui.agent_chat_next_picture": "下一张图片",
"ui.agent_chat_no_cli": "在应用旁边未找到 solidcraft-cli,因此智能体无法访问设计。",
"ui.agent_chat_no_control": "智能体聊天的端点未能启动,因此智能体无法访问设计。",
"ui.agent_chat_no_images": "该智能体不接收图片",
"ui.agent_chat_no_picture": "剪贴板上没有图片",
"ui.agent_chat_none_found": "未找到编程智能体。请安装以下之一,然后点击刷新:",
"ui.agent_chat_none_found_short": "未找到智能体",
"ui.agent_chat_not_installed": "未安装",
"ui.agent_chat_not_signed_in": "未登录",
"ui.agent_chat_own_window": "独立窗口",
"ui.agent_chat_paste_picture": "粘贴图片",
"ui.agent_chat_permission": "智能体请求运行:{title}",
"ui.agent_chat_pick": "智能体",
"ui.agent_chat_placeholder": "让智能体修改设计…",
"ui.agent_chat_placeholder_busy": "输入消息,待智能体完成后发送(Ctrl+Enter:立即发送)",
"ui.agent_chat_pop_out": "在独立窗口中打开(可移到另一个屏幕)",
"ui.agent_chat_previous_picture": "上一张图片",
"ui.agent_chat_privacy": "除了你以自己的账户运行的智能体之外,不会向任何地方发送任何内容。",
"ui.agent_chat_privacy_note": "SolidCraft 不向任何地方发送任何内容:你运行的智能体以你自己的账户与它自己的服务通信。SolidCraft 从不查看或保存任何密钥或密码。",
"ui.agent_chat_queue": "加入队列",
"ui.agent_chat_queue_full": "等待中的消息太多:请删除一条,或等待智能体完成。",
"ui.agent_chat_queued": "已排队",
"ui.agent_chat_queued_stopped": "已排队(已停止,未发送)",
"ui.agent_chat_refresh": "刷新",
"ui.agent_chat_refused": "不允许智能体执行:{reason}",
"ui.agent_chat_remove": "从队列中移除",
"ui.agent_chat_remove_file": "从这条消息中移除",
"ui.agent_chat_remove_imported": "从这条消息中移除;零件仍保留在设计中(撤销可将其删除)",
"ui.agent_chat_right": "右侧",
"ui.agent_chat_save": "保存",
"ui.agent_chat_send": "发送",
"ui.agent_chat_send_now": "立即发送",
"ui.agent_chat_send_now_tip": "停止智能体当前的步骤,并接着发送这条消息(Ctrl+Enter)",
"ui.agent_chat_side": "智能体聊天位置",
"ui.agent_chat_signed_in": "已登录",
"ui.agent_chat_state_auth": "需要登录",
"ui.agent_chat_state_busy": "工作中…",
"ui.agent_chat_state_exited": "智能体已停止",
"ui.agent_chat_state_off": "未连接",
"ui.agent_chat_state_ready": "就绪",
"ui.agent_chat_state_starting": "正在启动…",
"ui.agent_chat_stop": "停止",
"ui.agent_chat_stop_tip": "停止智能体及其启动的所有进程",
"ui.agent_chat_stop_turn_tip": "停止智能体(Esc)。排队的消息仍保持排队。",
"ui.agent_chat_turn_limit": "每条消息的更改数",
"ui.agent_chat_undo_changes": "撤销这些更改",
"ui.agent_chat_undo_label": "智能体聊天:{message}",
"ui.agent_chat_undone": "(已撤销)",
"ui.agent_chat_view_attached": "已附加视图",
"ui.agent_cursor": "代理光标",
"ui.agent_cursor_speed": "代理光标速度",
"ui.agent_off_thread": "代理运行命令时保持窗口响应",
"ui.agent_off_thread_note": "代理(来自 AI 面板或 MCP 客户端)的耗时命令在窗口之外计算:运行时仍可旋转和查看视图,并可在视图中的提示上停止它。关闭:每条命令在窗口线程上运行,窗口会等待其完成。",
"ui.ai_add": "添加",
"ui.ai_add_agent": "添加智能体…",
"ui.ai_add_agent_title": "添加智能体",
"ui.ai_add_api": "OpenAI 兼容 API",
"ui.ai_add_custom": "自定义命令",
"ui.ai_add_installed": "已安装的智能体",
"ui.ai_add_installed_note": "为已安装的智能体添加一个自己的条目,例如使用其他参数。已安装的智能体会自动列出。",
"ui.ai_added": "已添加",
"ui.ai_agent_mode_tip": "智能体自己的模式:它自己的工具(shell、文件编辑)遵循此模式。SolidCraft 的工具遵循“首选项 > AI”中的权限。",
"ui.ai_agents": "智能体",
"ui.ai_always_allow": "始终允许",
"ui.ai_always_allow_tip": "从现在起允许该智能体使用 {tool},不再询问",
"ui.ai_always_allowed": "始终允许的项目",
"ui.ai_always_allowed_none": "尚无始终允许的项目。你在聊天中选择“始终允许”的回答会列在这里。",
"ui.ai_auto_allowed": "已自动允许:{title}({why})",
"ui.ai_auto_mode": "你的权限设置",
"ui.ai_auto_ours": "SolidCraft 会自行检查它自己的工具",
"ui.ai_auto_remembered": "你选择了始终允许",
"ui.ai_bad_url": "请输入以 http:// 或 https:// 开头的 URL",
"ui.ai_base_url": "基础 URL",
"ui.ai_button": "AI",
"ui.ai_command_hint": "my-agent --acp",
"ui.ai_copy_suffix": "副本",
"ui.ai_custom_url": "自定义 URL",
"ui.ai_default": "默认",
"ui.ai_http_busy": "端点繁忙或已达上限,请稍后再试",
"ui.ai_http_key": "端点拒绝了密钥:请在“首选项 > AI”中检查",
"ui.ai_http_not_found": "找不到该端点或模型:请检查基础 URL 和模型名称",
"ui.ai_key": "API 密钥",
"ui.ai_key_hint": "可选;保存在系统钥匙串中",
"ui.ai_key_needs_https": "密钥只会通过 HTTPS 发送,或发送到本机。",
"ui.ai_key_note": "保存在系统钥匙串中,绝不保存在 SolidCraft 的设置里。本地服务器可留空。",
"ui.ai_keychain_error": "系统钥匙串拒绝:{error}",
"ui.ai_mode_all": "全部允许",
"ui.ai_mode_all_note": "不再询问。崩溃报告仍不可访问,文件夹限制仍然有效。",
"ui.ai_mode_all_warning": "智能体可以不经询问保存、覆盖、导出和替换你的设计。只在你信任的智能体和已保存的设计上使用。",
"ui.ai_mode_ask": "每次询问",
"ui.ai_mode_ask_note": "对设计的每项更改和每个文件操作都要等待你的允许。",
"ui.ai_mode_edits": "自动允许模型编辑",
"ui.ai_mode_edits_note": "建模命令无需询问即可运行;保存、打开、导出等文件操作或破坏性操作仍会询问。",
"ui.ai_mode_global": "按上方设置",
"ui.ai_model": "模型",
"ui.ai_model_hint": "qwen3:14b",
"ui.ai_modes_scope": "这些设置适用于 SolidCraft 的工具。智能体自己的工具(它的 shell、文件编辑)遵循智能体自己的模式;如果智能体提供模式,可在聊天面板标题栏中选择。",
"ui.ai_name": "名称",
"ui.ai_name_hint": "我的智能体",
"ui.ai_need_command": "请输入启动智能体的命令",
"ui.ai_need_model": "请输入模型名称",
"ui.ai_no_answer": "智能体未及时响应",
"ui.ai_no_http": "此版本无法访问 API 端点",
"ui.ai_no_keychain": "系统钥匙串不可用,无法保存密钥。无需密钥的本地服务器仍可使用。",
"ui.ai_panel": "面板",
"ui.ai_permissions": "权限",
"ui.ai_preset": "预设",
"ui.ai_remove": "移除",
"ui.ai_request_limit": "每条消息 24 次请求后已停止;再发送一条消息即可继续",
"ui.ai_reset": "重置",
"ui.ai_settings": "AI 设置…",
"ui.ai_show_features": "显示 AI 功能",
"ui.ai_show_features_note": "智能体聊天:一个面板,由你已在使用的编程智能体或你选择的模型端点处理打开的设计。关闭后:没有 AI 按钮、快捷键、菜单项或面板,也不会查找或启动任何程序。",
"ui.ai_switch_tip": "更改此对话的智能体",
"ui.ai_test": "测试",
"ui.ai_test_acp_ok": "已响应:{agent}",
"ui.ai_test_acp_tip": "短暂启动智能体并请求一个会话,然后结束它",
"ui.ai_test_api_tip": "向端点查询其模型列表",
"ui.ai_test_no_model": "已连接:{count} 个模型,但没有 {model}",
"ui.ai_test_ok": "已连接:{count} 个模型",
"ui.ai_testing": "正在测试…",
"ui.ai_tool_done": "完成",
"ui.ai_tool_failed": "失败",
"ui.ai_tool_running": "运行中",
"ui.ai_tool_unfold": "点击显示返回内容",
"ui.ai_tool_waiting": "等待中",
"ui.ai_toolbar_button": "在工具栏显示按钮",
"ui.ai_toolbar_button_note": "工具栏右端的 AI 按钮。Ctrl+Shift+A 和视图菜单仍可打开面板。",
"ui.ai_undo_tip": "将智能体为此消息所做的全部更改一步撤销",
"ui.ai_url_hint": "https://example.com/v1",
"ui.all": "全部",
"ui.ambient_occlusion": "环境光遮蔽",
"ui.ambient_occlusion_help": "在不透明表面相接处添加柔和阴影。需要 GPU 视口。",
"ui.analysis": "分析",
"ui.angle": "角度",
"ui.angle_decimals": "角度小数位",
"ui.animateJoint": "动画接头",
"ui.animate_view_changes": "视图变化动画",
"ui.animation": "动画",
"ui.animation_speed": "动画速度",
"ui.anti_aliasing": "抗锯齿",
"ui.apply": "应用",
"ui.arc": "圆弧",
"ui.assistant": "助手",
"ui.assistant_waiting": "{count} 个批准请求等待中",
"ui.autosave_every": "自动保存间隔",
"ui.axes": "轴",
"ui.axis": "轴",
"ui.back": "返回",
"ui.base_point": "基点",
"ui.blocked": "被遮挡",
"ui.bodies": "实体",
"ui.bodies_all_if_none": "实体(未选择则全部)",
"ui.box": "长方体",
"ui.break": "打断",
"ui.browser_bodies_one": "{count} 个实体",
"ui.browser_bodies_other": "{count} 个实体",
"ui.browser_collapse": "折叠浏览器",
"ui.browser_expand": "展开浏览器",
"ui.browser_title": "浏览器",
"ui.calibrate": "校准",
"ui.cancel": "取消",
"ui.canvases": "画布",
"ui.center": "中心",
"ui.centerline": "中心线",
"ui.chain": "链",
"ui.chamfer": "倒角",
"ui.chamfer_type": "倒角类型",
"ui.change_workspace": "更改工作区",
"ui.circle": "圆",
"ui.circular_pattern": "圆形阵列",
"ui.clear": "清除",
"ui.clear_recent": "清除最近",
"ui.clear_the_selection": "清除选择",
"ui.click_selects_whole_bodies": "单击选择整个实体",
"ui.click_then_press_key": "单击,然后按新按键",
"ui.close": "关闭",
"ui.coil": "螺旋",
"ui.coincident": "重合",
"ui.collapse": "折叠",
"ui.collinear": "共线",
"ui.colour_vision": "色觉",
"ui.colour_vision_deutan": "绿色觉异常(Deutan)",
"ui.colour_vision_deutan_tip": "绿色感知较弱或缺失时使用",
"ui.colour_vision_failed": "失败",
"ui.colour_vision_fixed": "固定",
"ui.colour_vision_mode": "模式",
"ui.colour_vision_note": "更改表示含义的颜色:草图状态、轴、折弯、分析和图标。如果使用 Windows 颜色滤镜,请保持“关闭”。",
"ui.colour_vision_off": "关闭",
"ui.colour_vision_off_tip": "主题本身的颜色",
"ui.colour_vision_projected": "投影",
"ui.colour_vision_protan": "红色觉异常(Protan)",
"ui.colour_vision_protan_tip": "红色感知较弱或缺失时使用",
"ui.colour_vision_sample": "示例",
"ui.colour_vision_tritan": "蓝色觉异常(Tritan)",
"ui.colour_vision_tritan_tip": "蓝色感知较弱或缺失时使用",
"ui.combine": "组合",
"ui.coming_later": "即将推出",
"ui.command_done": "{command} 完成",
"ui.command_palette_hint": "输入命令,例如 {example} — 或按 S 搜索",
"ui.concentric": "同心",
"ui.conic_curve": "圆锥曲线",
"ui.constant": "恒定",
"ui.constraints_conflict": "约束冲突",
"ui.construction": "构造",
"ui.context_menu": "上下文菜单",
"ui.continuity_g0": "G0 折痕",
"ui.continuity_g1": "G1 相切",
"ui.continuity_g2": "G2 曲率",
"ui.continuity_gap": "缝隙",
"ui.copy": "复制",
"ui.corner": "角",
"ui.corners": "角点",
"ui.counterbore": "沉头孔",
"ui.countersink": "锥形沉孔",
"ui.create": "创建",
"ui.create_copy": "创建副本",
"ui.create_sketch": "创建草图",
"ui.current": "当前",
"ui.curvature": "曲率",
"ui.curvature_g2": "曲率连续 (G2)",
"ui.curves": "曲线",
"ui.custom_program": "自定义…",
"ui.custom_program_tip": "选择要添加到列表的切片软件程序",
"ui.customizeToolbar": "自定义工具栏…",
"ui.cut": "剪切",
"ui.cylinder": "圆柱体",
"ui.dark": "深色",
"ui.default_modelling_orientation": "默认建模方向",
"ui.delete": "删除",
"ui.depth": "深度",
"ui.design": "设计",
"ui.design_properties.author": "作者",
"ui.design_properties.description": "描述",
"ui.design_properties.exports": "导出 STEP、IGES 和 3MF 时,若格式有对应字段,会写入这些属性。",
"ui.design_properties.license": "许可证",
"ui.design_properties.not_text": "已保存为非文本值;在此输入将替换它。",
"ui.design_properties.organization": "组织",
"ui.design_properties.others": "其他工具的数据",
"ui.design_properties.others_note": "按原样保存在设计中,从不导出。",
"ui.design_properties.part_number": "零件号",
"ui.design_properties.project": "项目",
"ui.design_properties.revision": "版本",
"ui.diameter": "直径",
"ui.dimension": "尺寸",
"ui.direction": "方向",
"ui.display_quality": "显示质量",
"ui.display_quality_coarse": "粗糙",
"ui.display_quality_fine": "精细",
"ui.display_quality_normal": "标准",
"ui.display_quality_ultra": "极高",
"ui.distance": "距离",
"ui.distance_1": "距离 1",
"ui.distance_2": "距离 2",
"ui.document_settings": "文档设置",
"ui.don_t_save": "不保存",
"ui.draft": "拔模",
"ui.drawing": "绘图",
"ui.drill_point": "钻尖",
"ui.edit": "编辑",
"ui.editJointLimits": "编辑接头限制",
"ui.edit_section_analysis": "编辑截面分析",
"ui.ellipse": "椭圆",
"ui.end_radius": "结束半径",
"ui.end_scale": "末端缩放",
"ui.entities": "实体",
"ui.equal": "相等",
"ui.equivalent_radius": "等效半径",
"ui.expand": "展开",
"ui.exportDxf": "导出 DXF…",
"ui.export_ellipsis_keymap": "导出…",
"ui.export_keymap_tip": "将按键、S 框收藏和工具栏导出为文件",
"ui.extend": "延伸",
"ui.extent_type": "延伸类型",
"ui.extrude": "拉伸",
"ui.factor": "系数",
"ui.feature_history": "特征历史",
"ui.feature_options": "特征选项",
"ui.features": "特征",
"ui.file": "文件",
"ui.fillet": "圆角",
"ui.filter_commands_or_keys": "筛选命令或按键",
"ui.findInTimeline": "在时间线中查找",
"ui.findInWindow": "在窗口中查找",
"ui.finish_sketch": "完成草图",
"ui.fit": "适合",
"ui.fix_unfix": "固定/取消固定",
"ui.flat": "平面",
"ui.flip": "翻转",
"ui.format": "格式",
"ui.frame_rate": "帧率",
"ui.front": "前视",
"ui.fully_constrained": "完全约束",
"ui.function": "函数",
"ui.general": "常规",
"ui.graphics": "图形",
"ui.graphics_custom": "自定义",
"ui.graphics_performance": "性能",
"ui.graphics_preset": "图形预设",
"ui.graphics_preset_help": "质量:环境光遮蔽、精细显示质量和自适应2×超采样。性能:关闭环境光遮蔽、普通显示质量和关闭超采样。手动修改显示为自定义。MSAA保持不变。",
"ui.graphics_quality": "质量",
"ui.grid_follows_view": "网格跟随视图",
"ui.grid_follows_view_hint": "在侧视图中,将网格显示在朝向该视图的竖直平面上,而不是地面上",
"ui.ground_shadow": "地面阴影",
"ui.groupSelected": "将所选编组",
"ui.heading_add_ins": "加载项",
"ui.heading_assemble": "装配",
"ui.heading_box": "长方体",
"ui.heading_chamfer": "倒角",
"ui.heading_circular_pattern": "圆形阵列",
"ui.heading_coil": "螺旋",
"ui.heading_combine": "组合",
"ui.heading_configure": "配置",
"ui.heading_constraints": "约束",
"ui.heading_construct": "构造",
"ui.heading_create": "创建",
"ui.heading_create_sketch": "创建草图",
"ui.heading_cylinder": "圆柱体",
"ui.heading_design": "设计",
"ui.heading_draft": "拔模",
"ui.heading_edit": "编辑",
"ui.heading_extrude": "拉伸",
"ui.heading_fillet": "圆角",
"ui.heading_finish_sketch": "完成草图",
"ui.heading_front": "前视",
"ui.heading_hole": "孔",
"ui.heading_home": "主页",
"ui.heading_insert": "插入",
"ui.heading_inspect": "检查",
"ui.heading_interference": "干涉",
"ui.heading_loft": "放样",
"ui.heading_make": "制作",
"ui.heading_measure": "测量",
"ui.heading_mesh": "网格",
"ui.heading_mirror": "镜像",
"ui.heading_modify": "修改",
"ui.heading_move": "移动",
"ui.heading_move_copy": "移动/复制",
"ui.heading_offset": "偏移",
"ui.heading_offset_plane": "偏移平面",
"ui.heading_ok": "确定",
"ui.heading_parameters": "参数",
"ui.heading_pattern": "阵列",
"ui.heading_pattern_on_path": "路径阵列",
"ui.heading_pipe": "管道",
"ui.heading_plane_at_angle": "角度平面",
"ui.heading_plastic": "塑料",
"ui.heading_position": "位置",
"ui.heading_prepare": "准备",
"ui.heading_rectangular_pattern": "矩形阵列",
"ui.heading_revolve": "旋转",
"ui.heading_right": "右视",
"ui.heading_save_mesh": "另存为网格",
"ui.heading_scale": "缩放",
"ui.heading_section_analysis": "截面分析",
"ui.heading_select": "选择",
"ui.heading_setup": "设置",
"ui.heading_sheet_metal": "钣金",
"ui.heading_shell": "抽壳",
"ui.heading_sketch": "草图",
"ui.heading_sketch_scale": "草图缩放",
"ui.heading_solid": "实体",
"ui.heading_sphere": "球体",
"ui.heading_split_body": "分割实体",
"ui.heading_surface": "曲面",
"ui.heading_sweep": "扫掠",
"ui.heading_thread": "螺纹",
"ui.heading_top": "上视",
"ui.heading_torus": "圆环体",
"ui.heading_utilities": "工具",
"ui.heading_utility": "实用工具",
"ui.help": "帮助",
"ui.hide": "隐藏",
"ui.hideAxes": "隐藏轴",
"ui.hideDimension": "隐藏尺寸",
"ui.hideOrigin": "隐藏原点",
"ui.hidePlanes": "隐藏平面",
"ui.hideProfile": "隐藏轮廓",
"ui.history_title": "历史",
"ui.hole": "孔",
"ui.hole_tap_type": "孔攻丝类型",
"ui.hole_type": "孔类型",
"ui.home": "主页",
"ui.homeView": "主视图",
"ui.horizontal_vertical": "水平/垂直",
"ui.import_ellipsis": "导入…",
"ui.infinite": "无限",
"ui.insert": "插入",
"ui.inspect": "检查",
"ui.intersect": "相交",
"ui.isolate": "隔离",
"ui.join": "连接",
"ui.joints": "关节",
"ui.keyboard_shortcuts": "键盘快捷键",
"ui.language": "语言",
"ui.length_decimals": "长度小数位",
"ui.light": "浅色",
"ui.line": "直线",
"ui.lock": "锁定",
"ui.loft": "放样",
"ui.look_at": "朝向",
"ui.look_at_anim_desc": "轴视图、注视、主视图与适合窗口",
"ui.manipulator_free_alt": "操纵器自由拖动也适用于 Alt/Option",
"ui.manipulator_free_alt_tip": "开:在拉伸/小控件箭头上按 Alt/Option 或 Ctrl/Cmd 可关闭数值捕捉。关:仅 Ctrl/Cmd。",
"ui.manufacture": "制造",
"ui.material_review.axes": "材料局部坐标轴;不指定实体方向。",
"ui.material_review.claims": "来源和许可证声明未经核实。缺失值保持未知。",
"ui.material_review.compressive_strength": "抗压强度",
"ui.material_review.conditions": "声明的条件",
"ui.material_review.density": "密度",
"ui.material_review.derived": "推导的各向同性模量",
"ui.material_review.elasticity": "弹性",
"ui.material_review.input": "粘贴架构版本1的材料卡(JSON)",
"ui.material_review.limit": "材料卡超过256 KiB输入限制。",
"ui.material_review.moisture_unit": "kg 水 / kg 干燥材料",
"ui.material_review.properties": "属性",
"ui.material_review.review": "检查材料卡",
"ui.material_review.scope": "仅检查候选数据:不指定或保存。数值验证不等于工程认证。",
"ui.material_review.shear_strength": "抗剪强度",
"ui.material_review.source": "来源",
"ui.material_review.specific_heat": "比热容",
"ui.material_review.tensile_strength": "抗拉强度",
"ui.material_review.thermal_conductivity": "导热系数",
"ui.material_review.thermal_expansion": "热膨胀",
"ui.material_review.title": "检查物理材料数据",
"ui.material_review.unknown": "未知",
"ui.material_review.yield_strength": "屈服强度",
"ui.measure": "测量",
"ui.mesh_format_3mf": "3MF",
"ui.mesh_format_3mf_tagged": "带面标签的 3MF",
"ui.mesh_format_stl": "STL",
"ui.mirror": "镜像",
"ui.mirror_line": "镜像线",
"ui.move": "移动",
"ui.multiple": "多个",
"ui.named_views": "命名视图",
"ui.navigation": "导航",
"ui.needs_design": "{command}: 请先打开一个设计",
"ui.newSketchGroup": "新建草图组",
"ui.new_body": "新建实体",
"ui.new_design": "新建设计",
"ui.no_geometry_yet": "尚无几何图形",
"ui.no_slicer_found": "未找到切片软件",
"ui.normal": "法向",
"ui.normalConstruction": "普通 / 构造",
"ui.not_a_program": "{path} 不是可以启动的程序",
"ui.object_type": "对象类型",
"ui.objects": "对象",
"ui.offer_to_stand_up_y_up_files": "提供站立 Y-up 文件",
"ui.offset": "偏移",
"ui.offset_plane": "偏移平面",
"ui.one_side": "单侧",
"ui.open": "打开",
"ui.open_ends_tip": "未接触任何曲线",
"ui.open_preferences": "打开首选项",
"ui.open_recent": "打开最近",
"ui.operation": "操作",
"ui.options": "选项",
"ui.orbit": "环绕",
"ui.orbit_around": "环绕",
"ui.orientation": "定向",
"ui.origin": "原点",
"ui.palette_construction_mode": "构造模式 (X)",
"ui.palette_more": "更多",
"ui.palette_sketch_options": "草图选项",
"ui.pan": "平移",
"ui.pan_zoom_orbit": "平移、缩放、环绕",
"ui.parallel": "平行",
"ui.parameters": "参数",
"ui.part_size_shared": "重新生成零件并替换额外添加的特征。此零部件的所有实例都会更新。",
"ui.paste": "粘贴",
"ui.path": "路径",
"ui.pattern_on_path": "路径阵列",
"ui.perpendicular": "垂直",
"ui.perspective_view": "透视图",
"ui.pinToShortcuts": "固定到快捷方式",
"ui.pinToToolbar": "固定到工具栏",
"ui.pipe": "管道",
"ui.placement": "放置",
"ui.plane": "平面",
"ui.plane_at_angle": "角度平面",
"ui.plugins": "插件",
"ui.plugins_desktop": "插件仅在桌面版中可用。",
"ui.plugins_empty": "尚未安装插件。",
"ui.plugins_note": "每个插件是 {path} 里的一个文件夹,其中有 plugin.json。SolidCraft 只读取该文件,不运行文件夹里的代码。关闭插件仍会保留安装。",
"ui.plugins_skipped": "有 {count} 个文件夹无法读取。",
"ui.plugins_version": "{version}",
"ui.point": "点",
"ui.point_under_the_cursor": "光标下的点",
"ui.points": "点",
"ui.polygon": "多边形",
"ui.preferences": "首选项",
"ui.press_a_key": "按一个键…",
"ui.profile": "轮廓",
"ui.profile_plane": "轮廓平面",
"ui.profiles": "轮廓",
"ui.project": "投影",
"ui.project_face_edges_sketch": "将面的边投影到新草图",
"ui.properties": "属性",
"ui.pull_direction": "拔模方向",
"ui.quantity": "数量",
"ui.quantity_2": "数量 2",
"ui.quit": "退出",
"ui.radial_context_menu": "环形上下文菜单",
"ui.radius": "半径",
"ui.rail": "导轨",
"ui.rail_fit": "导轨适配方式",
"ui.reachable": "可到达",
"ui.rectangle": "矩形",
"ui.rectangular_pattern": "矩形阵列",
"ui.redo": "重做",
"ui.relink_design_changed": "选择源文件时装配已更改。请重新开始链接。",
"ui.relink_done": "已为所有实例重新链接源文件。",
"ui.relink_not_linked": "此组件未链接到源设计。",
"ui.relink_select_one": "请先选择一个链接组件或其实例。",
"ui.relink_source_all": "重新链接源文件(所有实例)…",
"ui.removeFromToolbar": "从工具栏移除",
"ui.removeSection": "移除剖面",
"ui.render": "渲染",
"ui.renderer": "渲染器",
"ui.repeat": "重复",
"ui.report_a_bug": "报告缺陷",
"ui.reset": "重置",
"ui.reset_all": "全部重置",
"ui.reset_the_settings_on_this_page": "重置此页面上的设置",
"ui.restore": "还原",
"ui.restore_defaults": "恢复默认值",
"ui.reverse_horizontal_pan_direction": "反转水平平移方向",
"ui.reverse_horizontal_pan_tip": "水平双指滚动和拇指滚轮向相反方向平移",
"ui.reverse_zoom_direction": "反转缩放方向",
"ui.revolve": "旋转",
"ui.ribbon_exit": "退出",
"ui.ribbon_pin_footer": "固定的命令显示在功能区中。将指针悬停在行上可固定或取消固定。",
"ui.ribbon_workspace": "工作区",
"ui.right": "右视",
"ui.save": "保存",
"ui.save_as": "另存为",
"ui.save_mesh_no_slicer": "未找到切片软件:请选择“自定义…”并指定切片软件程序,或关闭“发送到切片软件”",
"ui.save_mesh_pick_bodies": "请选择要保存的实体",
"ui.save_mesh_temp_failed": "无法创建 {folder}:{error}",
"ui.saved_to": "已保存:{path}",
"ui.sbox_pin": "固定到 S 框顶部",
"ui.sbox_unpin": "取消固定",
"ui.scale": "缩放",
"ui.second_rail": "第二导轨",
"ui.section_analysis": "截面分析",
"ui.select": "选择",
"ui.selectOther": "选择其他…",
"ui.selectTangentChain": "选择相切链",
"ui.selection": "选择",
"ui.selection_modifiers": "选择修饰键",
"ui.selection_shift_add_only": "Shift+点击仅添加、不取消选择",
"ui.selection_shift_add_only_tip": "开:Shift 添加,Ctrl/Cmd 切换。关(默认):Shift 与 Ctrl/Cmd 均可切换。",
"ui.send": "发送",
"ui.send_to_slicer": "发送到切片软件",
"ui.sent_to_slicer": "已发送到 {slicer}",
"ui.sheet_gap": "间隙",
"ui.shell": "抽壳",
"ui.show": "显示",
"ui.showAll": "显示全部",
"ui.showAllBodies": "显示所有实体",
"ui.showAxes": "显示轴",
"ui.showDimension": "显示尺寸",
"ui.showOrigin": "显示原点",
"ui.showPlanes": "显示平面",
"ui.show_constraints": "约束",
"ui.show_construction_geometries": "构造几何图元",
"ui.show_dimensions": "尺寸",
"ui.show_profile": "显示轮廓",
"ui.show_projected_geometries": "投影几何",
"ui.simple": "简单",
"ui.simulation": "仿真",
"ui.single": "单个",
"ui.sketch": "草图",
"ui.sketch_dimension": "草图尺寸",
"ui.sketch_grid": "草图网格",
"ui.sketch_modifiers": "草图修饰键",
"ui.sketch_scale": "草图比例",
"ui.sketches": "草图",
"ui.slice": "切片",
"ui.slicer": "切片软件",
"ui.slicer_delete_tip": "{program}\n按 Delete 键从列表中移除",
"ui.slot": "槽",
"ui.smooth": "平滑",
"ui.smooth_wheel_zoom": "平滑滚轮缩放",
"ui.smooth_wheel_zoom_tip": "关闭后每个滚轮事件立即生效,不做平滑延迟",
"ui.snap": "捕捉",
"ui.space_mouse_calibrate": "校准…",
"ui.space_mouse_calibrate_tip": "按窗口提示移动摇杆帽,SolidCraft 会记住这个 3D 鼠标每个轴的方向和行程。校准结果按此 3D 鼠标保存。",
"ui.space_mouse_calibrate_title": "校准 3D 鼠标",
"ui.space_mouse_calibrated": "已校准",
"ui.space_mouse_calibration": "3D 鼠标校准",
"ui.space_mouse_calibration_done": "完成。保存后,每次连接此 3D 鼠标都会使用它。",
"ui.space_mouse_calibration_no_response": "有一个轴几乎没有移动,因此无法校准。请重新开始,并且每次把摇杆帽移得更远。",
"ui.space_mouse_dead_zone": "死区",
"ui.space_mouse_dead_zone_tip": "视图开始移动前摇杆帽需要移动的距离,以其全行程的比例表示。如果摇杆帽静止时视图仍在漂移,请调大。",
"ui.space_mouse_forget": "清除校准",
"ui.space_mouse_hint": "同时移动和旋转视图;草图中仅支持平移和缩放。",
"ui.space_mouse_navigate": "使用 SpaceNavigator / SpaceMouse 导航",
"ui.space_mouse_none": "未找到 3D 鼠标",
"ui.space_mouse_not_calibrated": "未校准",
"ui.space_mouse_reading": "读数",
"ui.space_mouse_step_lift": "向上提起摇杆帽,保持住,然后松开。",
"ui.space_mouse_step_press": "向下按压摇杆帽,保持住,然后松开。",
"ui.space_mouse_step_pull": "把摇杆帽拉向自己,保持住,然后松开。",
"ui.space_mouse_step_push": "把摇杆帽推离自己,保持住,然后松开。",
"ui.space_mouse_step_rest": "请把手从摇杆帽上移开,让它保持静止。",
"ui.space_mouse_step_slide_left": "向左推动摇杆帽,保持住,然后松开。",
"ui.space_mouse_step_slide_right": "向右推动摇杆帽,保持住,然后松开。",
"ui.space_mouse_step_tilt_back": "向后倾斜摇杆帽(前缘向上),保持住,然后松开。",
"ui.space_mouse_step_tilt_forward": "向前倾斜摇杆帽(前缘向下),保持住,然后松开。",
"ui.space_mouse_step_tilt_left": "向左倾斜摇杆帽(左缘向下),保持住,然后松开。",
"ui.space_mouse_step_tilt_right": "向右倾斜摇杆帽(右缘向下),保持住,然后松开。",
"ui.space_mouse_step_twist_clockwise": "顺时针扭转摇杆帽,保持住,然后松开。",
"ui.space_mouse_step_twist_counterclockwise": "逆时针扭转摇杆帽,保持住,然后松开。",
"ui.spacing": "间距",
"ui.spacing_2": "间距 2",
"ui.sphere": "球体",
"ui.spline": "样条曲线",
"ui.split_body": "分割实体",
"ui.stand_up_tip": "当 Z 朝上的 STEP 或 IGES 文件打开后,提示绕 X 轴旋转四分之一周",
"ui.start": "开始",
"ui.start_over": "重新开始",
"ui.start_page": "起始页",
"ui.stretch": "伸展",
"ui.supersampling": "超级采样 (SSAA)",
"ui.supersampling_adaptive": "仅在视图静止时",
"ui.supersampling_off": "关 (1×)",
"ui.suppress": "抑制",
"ui.suppress_auto_snap": "绘制/拖动时抑制自动捕捉",
"ui.suppress_auto_snap_note": "默认:Ctrl/Cmd 或 Alt/Option 均可抑制草图捕捉。也可改成只认其中一个键。",
"ui.sweep": "扫掠",
"ui.sweep_follow_direction": "跟随方向",
"ui.sweep_keep_as_drawn": "保持绘制方向",
"ui.sweep_turn_with_path": "随路径转动",
"ui.symmetric": "对称",
"ui.symmetry": "对称",
"ui.system": "系统",
"ui.tangent": "相切",
"ui.taper_angle": "锥角",
"ui.tapped": "攻丝",
"ui.text": "文本",
"ui.theme": "主题",
"ui.thickness": "厚度",
"ui.thread": "螺纹",
"ui.tie_ends": "约束",
"ui.tie_ends_tip": "约束全部未约束端点",
"ui.timeline_bottom": "底部时间轴",
"ui.timeline_left_note": "左侧布局下,回退条显示在零件和场景浏览器的上方。",
"ui.timeline_left_sidebar": "左侧边栏",
"ui.tip_angle": "尖端角度",
"ui.to_object": "到对象",
"ui.tool_direction": "刀具方向",
"ui.top": "上视",
"ui.torus": "圆环体",
"ui.total_angle": "总角度",
"ui.trackpad_pan_tip": "触控板手势用于平移(关闭:像滚轮一样缩放);鼠标滚轮缩放、拇指滚轮横向平移、双指捏合始终缩放",
"ui.trim": "修剪",
"ui.twist": "扭转",
"ui.two_finger_scroll_pans": "双指滚动平移",
"ui.two_sides": "双侧",
"ui.ui_scale": "界面缩放",
"ui.undo": "撤销",
"ui.unground": "取消固定",
"ui.unisolate": "取消隔离",
"ui.units": "单位",
"ui.units_of_new_designs": "新设计的单位",
"ui.unlock": "解锁",
"ui.unsuppress": "取消抑制",
"ui.untied_ends_tip": "仅位置重合",
"ui.untitled": "无标题",
"ui.up_axis_note": "视图中朝上的轴(轴视图、主视图、注视)。设计本身不变。",
"ui.updateToCurrentView": "更新为当前视图",
"ui.view_centre": "视图中心",
"ui.visual_shaded_hidden_edges": "带隐藏边的着色",
"ui.visual_shaded_with_edges": "带边着色",
"ui.visual_style": "视觉样式",
"ui.visual_wireframe": "线框",
"ui.workspace": "工作区",
"ui.workspace_animation_description": "爆炸视图、运动研究和故事板",
"ui.workspace_available": "可用",
"ui.workspace_current": "当前",
"ui.workspace_design_description": "草图、建模、装配和检查",
"ui.workspace_design_tabs": "模型 · 曲面 · 装配 · 插入 · 检查 · 管理 · 视图",
"ui.workspace_drawing_description": "包含视图、尺寸和标题栏的二维图纸",
"ui.workspace_footer": "所有工作区使用同一设计、历史记录和选择,仅功能区选项卡发生变化。编辑草图或特征时,切换器将被锁定。",
"ui.workspace_manufacture_description": "切片、刀具路径和设置",
"ui.workspace_planned": "计划中",
"ui.workspace_render_description": "产品预览、场景设置和渲染图像",
"ui.workspace_render_tabs": "场景 · 图像",
"ui.workspace_simulation_description": "载荷、约束和结果",
"ui.x_distance": "X 距离",
"ui.y_distance": "Y 距离",
"ui.y_up": "Y 朝上",
"ui.z_up": "Z 朝上",
"ui.zoom": "缩放",
"ui.zoom_to_cursor_tip": "滚轮向光标所在点缩放(关闭:向视图中心缩放)",
"ui.zoom_to_the_cursor": "缩放到光标",
"update.available": "SolidCraft {version} 已发布",
"update.button": "更新",
"update.button_version": "更新到 {version}",
"update.check_automatically": "自动检查更新",
"update.check_now": "立即检查",
"update.checking": "正在检查…",
"update.copy": "复制",
"update.dmg_opened": "磁盘映像已校验并打开:将 SolidCraft 拖到“应用程序”替换旧版本,然后重启 SolidCraft。",
"update.download": "下载",
"update.download_open": "下载并打开",
"update.downloading": "正在下载并校验… {done} / {total} MB",
"update.failed": "无法检查: {error}",
"update.file": "将下载 {file}。",
"update.install_failed": "更新未安装:{error}。未做任何更改;可用“下载”获取安装包。",
"update.install_msi": "安装(将关闭 SolidCraft)",
"update.installed": "SolidCraft {version} 已安装。重新启动后生效。",
"update.installer_started": "SolidCraft 关闭后将启动安装程序。",
"update.later": "稍后提醒",
"update.no_notes": "此版本没有发布说明。",
"update.package_hint": "此副本来自 {kind}。下载新软件包后用以下命令安装:",
"update.prefs_dev": "这是开发版本({version}),不检查更新。",
"update.prefs_flatpak": "此副本({version})由 Flatpak 更新:运行 {command} 或使用软件中心。SolidCraft 不会自行检查。",
"update.prefs_label": "更新",
"update.prefs_note": "当前为 SolidCraft {version}({kind})。检查时只向 GitHub 查询最新版本,不发送其他任何数据。",
"update.release_page": "打开发布页面",
"update.restart": "立即重启",
"update.restart_later": "稍后",
"update.show": "显示 {version} 更新",
"update.skip": "跳过此版本",
"update.system_hint": "此副本为 {kind}。用以下命令更新:",
"update.title": "有可用更新",
"update.up_to_date": "SolidCraft 已是最新版本。",
"update.update_now": "立即更新",
"update.you_have": "当前版本为 {version}。",
"↑ ↓ choose · Enter / Tab complete · Esc dismiss": "↑ ↓ 选择 · Enter / Tab 补全 · Esc 关闭"
}