jyviko and Claude Opus 5.5
75deb73aa7
Thread: ISO 228-1, ISO 7-1 and NPT pipe threads, taper threads by a radial law
...
Three forms: `bspp` (G, ISO 228-1, 55° parallel), `bspt` (R external, Rc internal, ISO 7-1,
55° taper 1 in 16) and `npt` (ASME B1.20.1, 60° taper 1 in 16). Their sizes are tabulated
from the public sources: ISO 7-1:1978 Table 1 (its gauge-plane diameters are the G sizes)
and NBS Handbook H28 (1957) Table VII.2; tests check every row against the standards' own
relations.
A taper thread starts at its free end with its standard diameter there (external: the gauge
diameter its gauge length in, internal: at the face). Its groove is the screw sweep with the
section moved 1/32 of the axial travel off the axis (the radial law the runouts use, added to
it), its section reaching just past the crest, and the material beyond the major cone (or
inside the minor cone) is cut with it, as a die or tap cuts the crests. An external one runs
its standard length by default.
The volumes are checked against the profile's material fraction integrated over the tapered
radii: G 1/2 to 2e-6, R 1/2, Rc 1/2 and 1/2-14 NPT within 0.2 % of the cut.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com >
2026-10-27 13:02:32 -04:00
..
2026-10-27 02:28:53 -04:00
2026-10-26 20:03:22 +00:00
2026-10-26 20:03:22 +00:00
2026-10-27 02:28:53 -04:00
2026-10-27 01:39:18 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-15 12:45:43 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 00:33:57 +00:00
2026-10-27 00:33:57 +00:00
2026-10-27 02:28:50 -04:00
2026-10-27 02:28:47 -04:00
2026-10-27 02:28:53 -04:00
2026-10-23 23:15:34 +00:00
2026-10-27 02:28:53 -04:00
2026-10-27 02:28:51 -04:00
2026-10-18 22:03:20 -04:00
2026-10-27 00:33:57 +00:00
2026-10-23 23:15:34 +00:00
2026-10-25 17:21:39 +00:00
2026-10-23 23:15:34 +00:00
2026-10-27 00:33:57 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 00:33:57 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-23 23:15:34 +00:00
2026-10-27 02:28:47 -04:00
2026-10-26 04:50:46 +00:00
2026-10-27 03:10:16 +00:00
2026-10-27 11:40:49 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-19 16:05:45 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-27 02:28:53 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 13:02:32 -04:00
2026-10-27 02:28:53 -04:00
2026-10-23 14:31:08 +00:00
2026-10-26 19:59:35 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 11:40:49 -04:00
2026-10-15 22:40:09 -04:00
2026-10-23 23:15:34 +00:00
2026-10-26 12:24:38 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:52 -04:00
2026-10-27 02:28:51 -04:00
2026-10-25 02:29:08 +00:00
2026-10-18 18:10:28 -04:00
2026-10-19 16:10:10 -04:00
2026-10-16 10:26:35 -04:00
2026-10-23 23:15:34 +00:00
2026-10-18 22:13:13 -04:00
2026-10-26 04:05:26 +00:00
2026-10-25 01:48:26 +00:00
2026-10-19 23:56:32 +00:00
2026-10-23 13:42:49 +00:00
2026-10-19 16:08:23 -04:00
2026-10-27 02:28:50 -04:00
2026-10-19 05:54:21 -04:00
2026-10-27 02:28:50 -04:00
Command ids are SolveCraft's own: 173 ids that were another product's internal command ids become dotted, lower-case ids (<area>.<thing>[.<variant>]: solid.extrude, sketch.rectangle.two_point, sheet.flange, joint.drive, ...), in the registry, toolbar, dialogs, shortcuts, palette, control channel, MCP, examples, scenarios and docs
2026-10-09 12:17:23 +00:00
2026-10-27 02:28:53 -04:00
2026-10-24 14:21:59 +00:00
2026-10-27 02:28:47 -04:00
2026-10-27 02:28:51 -04:00
2026-10-24 14:21:58 +00:00
2026-10-24 18:53:40 -04:00
2026-10-24 14:21:59 +00:00
2026-10-27 02:28:53 -04:00
2026-10-18 21:16:31 -04:00
2026-10-23 13:45:13 +00:00
2026-10-26 20:03:22 +00:00
2026-10-27 03:10:16 +00:00
2026-10-27 02:28:53 -04:00
2026-10-16 17:52:39 +02:00
2026-10-19 16:07:44 -04:00
2026-10-27 02:28:51 -04:00
2026-10-23 23:15:34 +00:00
2026-10-19 16:07:44 -04:00
2026-10-27 02:28:53 -04:00
2026-10-26 04:05:26 +00:00
2026-10-27 02:28:51 -04:00
2026-10-13 11:43:45 -04:00
2026-10-27 02:28:53 -04:00
2026-10-27 02:28:51 -04:00
2026-10-18 21:16:43 -04:00
2026-10-27 02:28:51 -04:00
2026-10-25 02:29:28 +00:00
2026-10-27 02:28:51 -04:00
2026-10-25 01:19:00 +00:00
2026-10-25 01:19:00 +00:00
2026-10-24 07:35:31 +00:00
2026-10-26 23:03:31 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-24 14:21:59 +00:00
2026-10-26 11:09:30 +00:00
2026-10-16 03:26:13 -04:00
2026-10-24 14:21:59 +00:00
2026-10-27 02:28:47 -04:00
2026-10-26 22:56:06 +00:00
2026-10-26 22:56:06 +00:00
2026-10-26 22:56:06 +00:00
2026-10-17 08:52:19 -04:00
2026-10-27 02:28:52 -04:00
2026-10-25 05:11:13 +00:00
2026-10-19 16:08:01 -04:00
2026-10-27 02:28:52 -04:00
2026-10-25 16:25:18 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:52 -04:00
2026-10-27 02:28:53 -04:00
2026-10-26 16:29:39 +00:00
2026-10-13 10:12:55 -04:00
2026-10-22 18:31:39 +00:00
2026-10-26 11:09:52 +00:00
2026-10-26 11:14:59 +00:00
2026-10-27 02:28:51 -04:00
2026-10-25 18:20:03 +00:00
2026-10-25 22:17:01 +00:00
2026-10-26 11:16:12 +00:00
2026-10-18 21:16:11 -04:00
2026-10-25 20:24:23 +00:00
2026-10-27 02:28:51 -04:00
2026-10-26 11:14:22 +00:00
2026-10-27 02:28:51 -04:00
2026-10-26 11:12:40 +00:00
2026-10-17 18:52:12 -04:00
2026-10-17 18:52:12 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:47 -04:00
2026-10-16 03:00:24 -04:00
2026-10-20 14:20:12 +00:00
2026-10-12 17:17:01 -04:00
2026-10-12 17:17:01 -04:00
2026-10-27 01:39:18 +00:00
2026-10-26 11:09:42 +00:00
2026-10-20 03:44:49 +00:00
2026-10-20 03:44:16 +00:00
2026-10-12 21:27:28 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 03:34:07 +00:00
2026-10-27 02:28:53 -04:00
2026-10-26 04:31:55 +00:00
2026-10-12 17:17:01 -04:00
2026-10-19 13:05:28 -04:00
2026-10-26 11:10:35 +00:00
2026-10-25 01:55:17 +00:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-10 12:08:19 -04:00
2026-10-13 10:12:55 -04:00
2026-10-24 20:46:44 +00:00
2026-10-13 23:52:10 -04:00
2026-10-24 20:46:44 +00:00
2026-10-15 03:47:37 -04:00
2026-10-25 20:24:23 +00:00
2026-10-27 02:28:51 -04:00
2026-10-20 14:20:12 +00:00
2026-10-26 23:03:31 +00:00
2026-10-27 01:39:18 +00:00
2026-10-26 11:12:50 +00:00
2026-10-13 05:26:29 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-17 21:47:38 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:51 -04:00
2026-10-27 02:28:53 -04:00
2026-10-23 23:15:34 +00:00
2026-10-27 02:28:51 -04:00
2026-10-16 10:26:27 -04:00
2026-10-21 23:09:57 +00:00
2026-10-25 01:49:58 +00:00
2026-10-27 02:28:53 -04:00
2026-10-21 23:09:57 +00:00
2026-10-25 11:01:32 +00:00
2026-10-27 02:28:53 -04:00