Files
solidcraft/tests/kernel-cases/fillets/KNOWN_FAILING
T
jyvikoandClaude Opus 5.5 faf08ec1bb Wave 436/509: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-30 07:06:10 -04:00

53 lines
7.3 KiB
Plaintext

# The fillet cases that fail today, one a line: `<case> <why it fails today>`. Sorted. The fillet
# rig gate (.github/workflows/fillet-rig.yml) fails on a case that fails and is not listed here,
# and on a listed case that passes: a fix removes its line in the same pull request.
# Baseline: develop 242bbc89f with the SMLib fixes of 2026-10-29 (integration-overnight + b78bd4a), aarch64 Linux.
1080-chamfer-sloped-basin-0-5-mm-rim-as-wide-as-the-rim-refused builds the full-width chamfer where it should be refused, naming the largest that fits
1080-chamfer-sloped-basin-1-mm-rim-as-wide-as-the-rim-refused builds the full-width chamfer where it should be refused, naming the largest that fits
1080-fillet-equal-slope-basin-1-mm-rim-loop-0-5 SMLib's check refuses the round: SmSurfOfRevolution Test #7, polar curve intervals do not match the surface's domain
1080-fillet-equal-slope-basin-1-mm-rim-loop-4 not supported yet: a convex round past its face is not yet built by subtraction
1080-fillet-notched-block-top-outline-r8 not supported yet: a convex round past its face is not yet built by subtraction (largest that fits named 7 mm)
1080-fillet-sloped-basin-0-5-mm-rim-r4 not supported yet: a convex round past its face is not yet built by subtraction (largest that fits named 1.185 mm)
1080-fillet-sloped-basin-0-5-mm-rim-r4-4-edges not supported yet: a convex round past its face is not yet built by subtraction
1080-fillet-sloped-basin-1-mm-rim-r0-5-4-edges SMLib's check refuses the round: SmSurfOfRevolution Test #7, polar curve intervals do not match the surface's domain
1080-fillet-sloped-basin-1-mm-rim-r4 not supported yet: a convex round past its face is not yet built by subtraction (largest that fits named 2.329 mm)
1080-fillet-sloped-basin-1-mm-rim-r4-2-edges not supported yet: a convex round past its face is not yet built by subtraction
1080-fillet-sloped-basin-1-mm-rim-r4-4-edges not supported yet: a convex round past its face is not yet built by subtraction
1113-chamfer-arc-top-edge-full-wall-height-refused builds the chamfer as tall as the wall where it should be refused as too large
1207-fillet-bar-top-edge-after-boss-arc-round-r0-5 SMLib's check refuses the round: internal coincident control points in a B-spline curve (an internal pole)
1668-fillet-outer-top-edge-of-thin-wall-r7-past-inside-corner a slit along the hollow, 0.507 mm^3 off: 38458.389 is V0 less the round's whole section along 104, so the section's part over the hollow (0.005068 mm^2 along 100), which is not material, is taken anyway
190-fillet-disc-rim-past-its-2mm-wall SMLib status 1001: a convex round past its face is not yet built by subtraction
2852-fillet-outer-round-r30-past-inner-round-refused refused for another reason: SMLib's result is not a closed solid, not too large naming 25.24
2893-chamfer-distance-and-angle-past-the-wall-refused refused for another reason: SMLib SM_ERR_INVALID_INPUT, not a check saying the angle runs past the wall
2893-chamfer-two-distances-elliptical-rim SMLib status 1001 on the elliptical rim's chamfer
2893-chamfer-two-distances-past-the-bottom-refused refused for another reason: SMLib status 1001, not too large
4782-fillet-bar-edge-wider-than-both-faces SMLib status 1001: a convex round past both its faces is not yet built by subtraction
5158-fillet-round-just-past-a-10mm-face SMLib status 1001: a convex round 0.01 past its face is not yet built by subtraction (10.0001-10.04 open)
5835-chamfer-sloped-basin-1-mm-rim-0-5-4-edges SMLib status 1001 on the chamfers meeting at the rim's re-entrant corners
5835-chamfer-sloped-basin-1-mm-rim-2-two-edges-refused refused for another reason: SMLib status 1001, not too large naming the largest that fits
5835-chamfer-sloped-basin-4-mm-rim-2-2-edges SMLib status 1001 on the chamfers meeting at the rim's re-entrant corner
5835-chamfer-sloped-basin-4-mm-rim-2-4-edges SMLib status 1001 on the chamfers meeting at the rim's re-entrant corners
851-chamfer-knife-edge-tip-0-5 SMLib SM_ERR_INVALID_INPUT on the knife edge (opposite normals on its two faces)
851-chamfer-knife-edge-tip-2 SMLib SM_ERR_INVALID_INPUT on the knife edge (opposite normals on its two faces)
851-chamfer-knife-edge-tip-2-box-less-cylinder SMLib SM_ERR_INVALID_INPUT on the knife edge (opposite normals on its two faces)
851-chamfer-knife-edge-tip-2-sketched SMLib SM_ERR_INVALID_INPUT on the knife edge (opposite normals on its two faces)
851-chamfer-knife-edge-tip-5 SMLib SM_ERR_INVALID_INPUT on the knife edge (opposite normals on its two faces)
9-fillet-corner-curvature-with-reduce-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
9-fillet-corner-curvature-with-taper-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
926-chamfer-top-edge-ending-on-boss-wall-above-it not supported yet: the chamfer is refused as larger than its faces where it ends on the boss's wall
cov-chamfer-concave-edge-through-up-down-joined-squares SMLib status 1001 on the concave chamfer's tangent chain
cov-chamfer-outer-corner-edge-of-a-shelled-box-with-a-lip SMLib's chamfer result is not a closed solid where it ends on the lip
cov-fillet-arc-edge-on-an-oblique-cut-of-a-bar SMLib's check refuses the round: internal coincident control points in a B-spline curve
every-block-cylinder-crease-top-edge-after-arc-round-r1 the r1 round's contact seam with the block's side face reads 60 degrees (the cylinder wall's normal) at its end on the crease (8.660, 5, 15.284): G0 where the round is built tangent
every-chamfer-pocket-rim-5-5-refused refused naming 5 mm as the largest distance: the full-width chamfer (legs as deep as the 5 mm walls) builds instead of being refused
every-chamfer-pocket-rim-5-full-depth-refused the full-width chamfer (legs as deep as the 5 mm walls) builds instead of being refused
every-hole-top-rim-chamfer-10-full-depth-refused the full-width chamfer (leg as deep as the 10 mm plate) builds instead of being refused
every-hole-top-rim-r12-past-plate-bottom SMLib status 1001: a convex round past its face on the tangent side is not yet built by subtraction
every-pocket-floor-and-rim-edges-r2 a corner patch where two rim rounds meet at each concave pocket corner (23 faces, not 19) instead of the mitre the rounds make running into each other
every-pocket-rim-edges-r2 a corner patch where two rim rounds meet at each concave pocket corner (19 faces, not 15) instead of the mitre the rounds make running into each other
every-pocket-rim-edges-r5-as-deep-as-pocket a corner patch where two rim rounds meet at each concave pocket corner (15 faces, not 11) instead of the mitre the rounds make running into each other
report-fillet-concave-arc-bar-top-into-cylinder-solver-residues SMLib status 1001: SmFilletNx1Corner cannot make the topology at the arc's end (fillet error 3, corner type 8)
report-fillet-corner-after-round-running-into-cylinder-solver-residues SMLib's check refuses the round: its corner's surface of revolution is close to singular at its boundary (SmSurface test 5)
report-fillet-curvature-three-edges-at-bar-corner SMLib's check refuses the open setback sheet of curvature rounds: a 2D B-spline curve cusp (SmBSplineCurve test 13)
report-fillet-edge-tangent-at-one-end-into-cylinder SMLib refuses the round as larger than the faces beside its edges allow (SMLIB_ERR_NO_ROOM): it fades to nothing at the edge's tangent end, on the wall SMLib now gets back as its cylinder