4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop. -28e3b8a19jyviko: Continuity in words: surface dialogs and Continuity Analysis show no G codes -81ecc872fjyviko: Guide: the Fillet dialog's Type and Corners in their new words -d1a8f0417jyviko: Thread: a boss thread keeps clear of the plate below -a30a85698jyviko: Thread: the chamfered tip reaches ISO 724's external minor diameter Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
12 lines
1022 B
JSON
12 lines
1022 B
JSON
{
|
|
"sources": [],
|
|
"what": "001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the external minor diameter d3, cut after the groove",
|
|
"source": "analytic",
|
|
"method": "ISO 68-1 basic profile (60 deg, root flat P/4 at d - 5H/4 ... minor d1 = d - 1.0825 P, crest flat P/8): a helical groove of fixed section is a screw motion, so averaged over the turn every meridian half-plane holds the same section and V = 2 pi int int r m(r) dr dz over the stock's section, m the material fraction per pitch; the groove runs out past free ends. Tolerance 0.01%: SMLib's exact screw sweep; the chamfer is axisymmetric and cut after the groove, so it only lowers the stock's outer radius: r <= d_f/2 + distance from the end (45 deg), d_f the external minor diameter d3 = d - 1.226869 P = 8.160 (ISO 724; ISO 4753 chamfered end: the end's diameter at most the minor diameter), below the modelled root d1",
|
|
"body_count": 1,
|
|
"volume_mm3": 1945.354522563,
|
|
"tolerance": {
|
|
"rel": 0.0001
|
|
}
|
|
}
|