* Extrude: a profile edge short of a face is not grown through the skin beyond it (#1669) A cut or join profile edge that lies on a face of the target is grown off it by 0.5 % of the body, so that the tool's wall does not lie in the face. Whether it lies on a face was judged half a growth step either side of it: empty just outside, material just inside. An edge 0.25 mm short of a 3.75 mm wall's far face reads the same, and the growth cut through the skin it should leave (55 050 mm³ instead of 56 130 on the test's wall). Now the space just past the edge, 1e-4 of the body out, must already be as the operation wants too. In #1669, the pleat's window built directly at the far end of a case opened through the wall at 3.75 and 4 mm, while its mirror, built without the growth, rightly left the skin and then failed to join the loft through it. Built either way, the window now leaves the skin. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Regression tests: the issue's pleats mirror and build at the far end (#1669) The issue's battery case at 3.5 mm: the mirror of the window and the pleat builds (it needed #1670's meshing of twisted faces), and at 3 mm the same window and pleat built directly at the far end of the finished case join it (they needed #1667's end rounds). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> * Far-end pleat test: the direct build matches the mirror's volume Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> --------- Co-authored-by: Erikas <erkexzcx@users.noreply.github.com> Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
40 lines
26 KiB
JSON
40 lines
26 KiB
JSON
{
|
|
"description": "A battery case shelled outward 3.5 mm, rounded R5 along its long edges and R1 round both ends (#1669). A window is cut through its front wall and a pleat lofted between an 18-point zig-zag and a flat band is joined into it; the window and the pleat are mirrored to the far end about a plane at half the length. The pleat's twisted ruled faces were meshed off their surfaces along their straight sides, so the meshes the joins are checked on misjudged them: the mirror failed with 'boolean Union: no result', and so did the same window and pleat built directly at the far end of the finished case at 3 mm.",
|
|
"commands": [
|
|
{"command": "parameters.add", "params": {"comment": "Battery flat top/bottom width", "expression": "290 mm", "name": "batt_w", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Side bulge past the top/bottom corners", "expression": "10 mm", "name": "batt_bulge", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Battery height", "expression": "92 mm", "name": "batt_h", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Height of the left side's widest point", "expression": "27 mm", "name": "peak_left", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Height of the right side's widest point", "expression": "batt_h - peak_left", "name": "peak_right", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Battery length", "expression": "198 mm", "name": "batt_len", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Connector tab width", "expression": "15 mm", "name": "tab_w", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Connector tab protrusion", "expression": "5.5 mm", "name": "tab_depth", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Ramp from tab back to the wall", "expression": "35 mm", "name": "ramp_len", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Blend radius ramp to wall", "expression": "80 mm", "name": "ramp_blend_wall", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Blend radius tab to ramp", "expression": "40 mm", "name": "ramp_blend_tab", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "TPU wall thickness", "expression": "3.5 mm", "name": "wall", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Fillet on the 4 long edges", "expression": "5 mm", "name": "r_big", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Fillet on all other edges", "expression": "1 mm", "name": "r_small", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Tool overshoot", "expression": "1 mm", "name": "clear", "unit": "mm"}},
|
|
{"command": "parameters.add", "params": {"comment": "Height where the pleat fades out", "expression": "batt_h - 2 * r_small", "name": "pleat_top", "unit": "mm"}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 1, "name": "BatteryProfile", "plane": {"plane": {"origin": [0.0, 0.0, 0.0], "x_dir": [1.0, 0.0, 0.0], "y_dir": [-0.0, 0.0, 1.0]}, "type": "custom"}, "sketch": {"constraints": [{"id": "k1", "l": 0, "type": "horizontal"}, {"id": "k2", "l": 3, "type": "horizontal"}, {"a": 3, "b": 6, "id": "k3", "type": "collinear"}, {"id": "k4", "l": 7, "p": 1, "q": 2, "type": "symmetric"}, {"id": "k5", "l": 7, "p": 4, "q": 5, "type": "symmetric"}, {"id": "k6", "l": 0, "param": "d1", "type": "length", "value": 290.0}, {"id": "k7", "l": 3, "param": "d2", "type": "length", "value": 290.0}, {"id": "k8", "p": 1, "param": "d3", "q": 5, "type": "distance_y", "value": 92.0}, {"id": "k9", "p": 2, "param": "d4", "q": 3, "type": "distance_x", "value": 10.0}, {"id": "k10", "p": 4, "param": "d5", "q": 3, "type": "distance_y", "value": 65.0}, {"id": "k11", "p": 5, "param": "d6", "q": 6, "type": "distance_x", "value": 10.0}, {"id": "k12", "p": 5, "param": "d7", "q": 6, "type": "distance_y", "value": 27.0}], "counters": {"j": 2, "k": 12, "l": 8, "p": 4}, "curves": [{"a": 1, "b": 2, "construction": false, "id": "l1", "type": "line"}, {"a": 2, "b": 3, "construction": false, "id": "l2", "type": "line"}, {"a": 3, "b": 4, "construction": false, "id": "l3", "type": "line"}, {"a": 4, "b": 5, "construction": false, "id": "l4", "type": "line"}, {"a": 5, "b": 6, "construction": false, "id": "l5", "type": "line"}, {"a": 6, "b": 1, "construction": false, "id": "l6", "type": "line"}, {"a": 7, "b": 8, "construction": true, "id": "l7", "link": "j1", "type": "line"}, {"a": 9, "b": 10, "construction": true, "id": "l8", "link": "j2", "type": "line"}], "links": [{"id": "j1", "kind": "project", "source": {"name": "x", "type": "sketch_axis"}}, {"id": "j2", "kind": "project", "source": {"name": "y", "type": "sketch_axis"}}], "points": [{"fixed": true, "id": "origin", "pos": [0.0, 0.0]}, {"fixed": false, "id": "l1.start", "pos": [-145.0, 92.0]}, {"fixed": false, "id": "l1.end", "pos": [145.0, 92.0]}, {"fixed": false, "id": "l2.end", "pos": [155.0, 65.0]}, {"fixed": false, "id": "l3.end", "pos": [145.0, 0.0]}, {"fixed": false, "id": "l4.end", "pos": [-145.0, 0.0]}, {"fixed": false, "id": "l5.end", "pos": [-155.0, 27.0]}, {"fixed": true, "id": "p1", "link": "j1", "pos": [-100.0, 0.0]}, {"fixed": true, "id": "p2", "link": "j1", "pos": [100.0, 0.0]}, {"fixed": true, "id": "p3", "link": "j2", "pos": [0.0, -100.0]}, {"fixed": true, "id": "p4", "link": "j2", "pos": [0.0, 100.0]}]}, "suppressed": false, "type": "sketch"}, "params": [{"expression": "batt_w", "name": "d1", "unit": "mm"}, {"expression": "batt_w", "name": "d2", "unit": "mm"}, {"expression": "batt_h", "name": "d3", "unit": "mm"}, {"expression": "batt_bulge", "name": "d4", "unit": "mm"}, {"expression": "peak_right", "name": "d5", "unit": "mm"}, {"expression": "batt_bulge", "name": "d6", "unit": "mm"}, {"expression": "peak_left", "name": "d7", "unit": "mm"}]}},
|
|
{"command": "timeline.add", "params": {"feature": {"body_names": ["Battery"], "extent": {"convention": "total_distance", "direction": "positive", "distance": "batt_len + tab_depth + clear"}, "id": 2, "name": "BatteryStock", "operation": "new_body", "param_names": ["d8"], "profiles": {"type": "all"}, "sketch": 1, "suppressed": false, "type": "extrude"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 3, "name": "PlanOutline", "param_names": ["d9"], "plane": {"base": {"name": "XY", "type": "origin"}, "distance": "-clear", "type": "offset"}, "sketch": {"constraints": [{"id": "k1", "l": 0, "type": "horizontal"}, {"id": "k2", "l": 1, "type": "vertical"}, {"id": "k3", "l": 2, "type": "horizontal"}, {"id": "k4", "l": 4, "type": "horizontal"}, {"id": "k5", "l": 5, "type": "vertical"}, {"id": "k6", "l": 6, "p": 1, "q": 2, "type": "symmetric"}, {"id": "k7", "l": 0, "param": "d10", "type": "length", "value": 320.0}, {"id": "k8", "p": 0, "param": "d11", "q": 1, "type": "distance_y", "value": 1.0}, {"id": "k9", "p": 0, "param": "d12", "q": 3, "type": "distance_y", "value": 198.0}, {"id": "k10", "p": 0, "param": "d13", "q": 5, "type": "distance_y", "value": 203.5}, {"id": "k11", "p": 0, "param": "d14", "q": 5, "type": "distance_x", "value": 130.0}, {"id": "k12", "p": 5, "param": "d15", "q": 4, "type": "distance_x", "value": 35.0}, {"c": 2, "id": "k13", "p": 4, "type": "point_on_curve"}, {"c": 3, "id": "k14", "p": 4, "type": "point_on_curve"}, {"a": 2, "b": 7, "id": "k15", "type": "tangent"}, {"a": 3, "b": 7, "id": "k16", "type": "tangent"}, {"c": 7, "id": "k17", "param": "d16", "type": "radius", "value": 80.0}, {"c": 3, "id": "k18", "p": 5, "type": "point_on_curve"}, {"c": 4, "id": "k19", "p": 5, "type": "point_on_curve"}, {"a": 3, "b": 8, "id": "k20", "type": "tangent"}, {"a": 4, "b": 8, "id": "k21", "type": "tangent"}, {"c": 8, "id": "k22", "param": "d17", "type": "radius", "value": 40.0}], "counters": {"a": 2, "corner": 2, "j": 1, "k": 22, "l": 7, "p": 6}, "curves": [{"a": 1, "b": 2, "construction": false, "id": "l1", "type": "line"}, {"a": 2, "b": 3, "construction": false, "id": "l2", "type": "line"}, {"a": 3, "b": 9, "construction": false, "id": "l3", "type": "line"}, {"a": 10, "b": 12, "construction": false, "id": "l4", "type": "line"}, {"a": 13, "b": 6, "construction": false, "id": "l5", "type": "line"}, {"a": 6, "b": 1, "construction": false, "id": "l6", "type": "line"}, {"a": 7, "b": 8, "construction": true, "id": "l7", "link": "j1", "type": "line"}, {"a": 9, "b": 10, "c": 11, "construction": false, "id": "a1", "type": "arc"}, {"a": 13, "b": 12, "c": 14, "construction": false, "id": "a2", "type": "arc"}], "links": [{"id": "j1", "kind": "project", "source": {"name": "y", "type": "sketch_axis"}}], "points": [{"fixed": true, "id": "origin", "pos": [0.0, 0.0]}, {"fixed": false, "id": "l1.start", "pos": [-160.0, 1.0]}, {"fixed": false, "id": "l1.end", "pos": [160.0, 1.0]}, {"fixed": false, "id": "l2.end", "pos": [160.0, -198.0]}, {"fixed": false, "id": "corner1", "pos": [-95.0, -198.0]}, {"fixed": false, "id": "corner2", "pos": [-130.0, -203.5]}, {"fixed": false, "id": "l5.end", "pos": [-160.0, -203.5]}, {"fixed": true, "id": "p1", "link": "j1", "pos": [0.0, -100.0]}, {"fixed": true, "id": "p2", "link": "j1", "pos": [0.0, 100.0]}, {"fixed": false, "id": "p3", "pos": [-88.75261852925456, -198.0]}, {"fixed": false, "id": "p4", "pos": [-101.17164524862525, -198.96982996764112]}, {"fixed": false, "id": "a1.center", "pos": [-88.75261852925458, -278.0]}, {"fixed": false, "id": "p5", "pos": [-126.91417737568737, -203.01508501617946]}, {"fixed": false, "id": "p6", "pos": [-133.12369073537272, -203.5]}, {"fixed": false, "id": "a2.center", "pos": [-133.12369073537272, -163.5]}]}, "suppressed": false, "type": "sketch"}, "params": [{"expression": "batt_w + 2 * batt_bulge + 10 * clear", "name": "d10", "unit": "mm"}, {"expression": "clear", "name": "d11", "unit": "mm"}, {"expression": "batt_len", "name": "d12", "unit": "mm"}, {"expression": "batt_len + tab_depth", "name": "d13", "unit": "mm"}, {"expression": "batt_w / 2 - tab_w", "name": "d14", "unit": "mm"}, {"expression": "ramp_len", "name": "d15", "unit": "mm"}, {"expression": "ramp_blend_wall", "name": "d16", "unit": "mm"}, {"expression": "ramp_blend_tab", "name": "d17", "unit": "mm"}]}},
|
|
{"command": "timeline.add", "params": {"feature": {"extent": {"convention": "total_distance", "direction": "positive", "distance": "batt_h + 2 * clear"}, "id": 4, "name": "TabAndRamp", "operation": "intersect", "param_names": ["d18"], "profiles": {"type": "all"}, "sketch": 3, "suppressed": false, "targets": ["Battery"], "type": "extrude"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"bodies": ["Battery"], "body_names": ["Case"], "copy": true, "id": 5, "name": "CopyForCase", "param_names": ["d19", "d20", "d21"], "suppressed": false, "translate": ["0", "0", "0"], "type": "move"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "direction": "outside", "face_names": ["F2:side:l4"], "faces": [[0.0, -100.0, 0.0]], "id": 6, "name": "CaseShell", "param_names": ["d22"], "suppressed": false, "thickness": "wall", "type": "shell"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 7, "name": "PleatCutSketch", "param_names": ["d23"], "plane": {"base": {"name": "XY", "type": "origin"}, "distance": "-clear", "type": "offset"}, "sketch": {"constraints": [{"id": "k1", "l": 0, "type": "horizontal"}, {"id": "k2", "l": 2, "type": "horizontal"}, {"id": "k3", "l": 1, "type": "vertical"}, {"id": "k4", "l": 3, "type": "vertical"}], "counters": {"k": 4, "l": 4, "p": 4}, "curves": [{"a": 1, "b": 2, "construction": false, "id": "l1", "type": "line"}, {"a": 2, "b": 3, "construction": false, "id": "l2", "type": "line"}, {"a": 3, "b": 4, "construction": false, "id": "l3", "type": "line"}, {"a": 4, "b": 1, "construction": false, "id": "l4", "type": "line"}], "points": [{"fixed": true, "id": "origin", "pos": [0.0, 0.0]}, {"fixed": false, "id": "p1", "pos": [-24.0, -0.5]}, {"fixed": false, "id": "p2", "pos": [24.0, -0.5]}, {"fixed": false, "id": "p3", "pos": [24.0, 3.5]}, {"fixed": false, "id": "p4", "pos": [-24.0, 3.5]}]}, "suppressed": false, "type": "sketch"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"extent": {"convention": "total_distance", "direction": "positive", "distance": "pleat_top + clear"}, "id": 8, "name": "PleatCut", "operation": "cut", "param_names": ["d24"], "profiles": {"type": "all"}, "sketch": 7, "suppressed": false, "targets": ["Case"], "type": "extrude"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 9, "name": "PleatBottom", "plane": {"name": "XY", "type": "origin"}, "sketch": {"constraints": [], "counters": {"l": 18}, "curves": [{"a": 1, "b": 2, "construction": false, "id": "l1", "type": "line"}, {"a": 2, "b": 3, "construction": false, "id": "l2", "type": "line"}, {"a": 3, "b": 4, "construction": false, "id": "l3", "type": "line"}, {"a": 4, "b": 5, "construction": false, "id": "l4", "type": "line"}, {"a": 5, "b": 6, "construction": false, "id": "l5", "type": "line"}, {"a": 6, "b": 7, "construction": false, "id": "l6", "type": "line"}, {"a": 7, "b": 8, "construction": false, "id": "l7", "type": "line"}, {"a": 8, "b": 9, "construction": false, "id": "l8", "type": "line"}, {"a": 9, "b": 10, "construction": false, "id": "l9", "type": "line"}, {"a": 10, "b": 11, "construction": false, "id": "l10", "type": "line"}, {"a": 11, "b": 12, "construction": false, "id": "l11", "type": "line"}, {"a": 12, "b": 13, "construction": false, "id": "l12", "type": "line"}, {"a": 13, "b": 14, "construction": false, "id": "l13", "type": "line"}, {"a": 14, "b": 15, "construction": false, "id": "l14", "type": "line"}, {"a": 15, "b": 16, "construction": false, "id": "l15", "type": "line"}, {"a": 16, "b": 17, "construction": false, "id": "l16", "type": "line"}, {"a": 17, "b": 18, "construction": false, "id": "l17", "type": "line"}, {"a": 18, "b": 1, "construction": false, "id": "l18", "type": "line"}], "points": [{"fixed": true, "id": "origin", "pos": [0.0, 0.0]}, {"fixed": false, "id": "l1.start", "pos": [-26.0, 3.0]}, {"fixed": false, "id": "l1.end", "pos": [-24.76384, 3.0]}, {"fixed": false, "id": "l2.end", "pos": [-16.0568, 14.97217]}, {"fixed": false, "id": "l3.end", "pos": [-8.0, 4.90117]}, {"fixed": false, "id": "l4.end", "pos": [0.0, 14.90117]}, {"fixed": false, "id": "l5.end", "pos": [8.0, 4.90117]}, {"fixed": false, "id": "l6.end", "pos": [16.0568, 14.97217]}, {"fixed": false, "id": "l7.end", "pos": [24.76384, 3.0]}, {"fixed": false, "id": "l8.end", "pos": [26.0, 3.0]}, {"fixed": false, "id": "l9.end", "pos": [26.0, 0.0]}, {"fixed": false, "id": "l10.end", "pos": [23.23616, 0.0]}, {"fixed": false, "id": "l11.end", "pos": [15.9432, 10.02783]}, {"fixed": false, "id": "l12.end", "pos": [8.0, 0.09883]}, {"fixed": false, "id": "l13.end", "pos": [0.0, 10.09883]}, {"fixed": false, "id": "l14.end", "pos": [-8.0, 0.09883]}, {"fixed": false, "id": "l15.end", "pos": [-15.9432, 10.02783]}, {"fixed": false, "id": "l16.end", "pos": [-23.23616, 0.0]}, {"fixed": false, "id": "l17.end", "pos": [-26.0, 0.0]}]}, "suppressed": false, "type": "sketch"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 10, "name": "PleatTop", "param_names": ["d25"], "plane": {"base": {"name": "XY", "type": "origin"}, "distance": "pleat_top + 0.5 mm", "type": "offset"}, "sketch": {"constraints": [], "counters": {"l": 18}, "curves": [{"a": 1, "b": 2, "construction": false, "id": "l1", "type": "line"}, {"a": 2, "b": 3, "construction": false, "id": "l2", "type": "line"}, {"a": 3, "b": 4, "construction": false, "id": "l3", "type": "line"}, {"a": 4, "b": 5, "construction": false, "id": "l4", "type": "line"}, {"a": 5, "b": 6, "construction": false, "id": "l5", "type": "line"}, {"a": 6, "b": 7, "construction": false, "id": "l6", "type": "line"}, {"a": 7, "b": 8, "construction": false, "id": "l7", "type": "line"}, {"a": 8, "b": 9, "construction": false, "id": "l8", "type": "line"}, {"a": 9, "b": 10, "construction": false, "id": "l9", "type": "line"}, {"a": 10, "b": 11, "construction": false, "id": "l10", "type": "line"}, {"a": 11, "b": 12, "construction": false, "id": "l11", "type": "line"}, {"a": 12, "b": 13, "construction": false, "id": "l12", "type": "line"}, {"a": 13, "b": 14, "construction": false, "id": "l13", "type": "line"}, {"a": 14, "b": 15, "construction": false, "id": "l14", "type": "line"}, {"a": 15, "b": 16, "construction": false, "id": "l15", "type": "line"}, {"a": 16, "b": 17, "construction": false, "id": "l16", "type": "line"}, {"a": 17, "b": 18, "construction": false, "id": "l17", "type": "line"}, {"a": 18, "b": 1, "construction": false, "id": "l18", "type": "line"}], "points": [{"fixed": true, "id": "origin", "pos": [0.0, 0.0]}, {"fixed": false, "id": "l1.start", "pos": [-26.0, 3.0]}, {"fixed": false, "id": "l1.end", "pos": [-24.0, 3.0]}, {"fixed": false, "id": "l2.end", "pos": [-16.0, 3.0]}, {"fixed": false, "id": "l3.end", "pos": [-8.0, 3.0]}, {"fixed": false, "id": "l4.end", "pos": [0.0, 3.0]}, {"fixed": false, "id": "l5.end", "pos": [8.0, 3.0]}, {"fixed": false, "id": "l6.end", "pos": [16.0, 3.0]}, {"fixed": false, "id": "l7.end", "pos": [24.0, 3.0]}, {"fixed": false, "id": "l8.end", "pos": [26.0, 3.0]}, {"fixed": false, "id": "l9.end", "pos": [26.0, 0.0]}, {"fixed": false, "id": "l10.end", "pos": [24.0, 0.0]}, {"fixed": false, "id": "l11.end", "pos": [16.0, 0.0]}, {"fixed": false, "id": "l12.end", "pos": [8.0, 0.0]}, {"fixed": false, "id": "l13.end", "pos": [0.0, 0.0]}, {"fixed": false, "id": "l14.end", "pos": [-8.0, 0.0]}, {"fixed": false, "id": "l15.end", "pos": [-16.0, 0.0]}, {"fixed": false, "id": "l16.end", "pos": [-24.0, 0.0]}, {"fixed": false, "id": "l17.end", "pos": [-26.0, 0.0]}]}, "suppressed": false, "type": "sketch"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 11, "name": "PleatNear", "operation": "join", "sections": [{"profiles": {"type": "all"}, "sketch": 9}, {"profiles": {"type": "all"}, "sketch": 10}], "suppressed": false, "targets": ["Case"], "type": "loft"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"id": 12, "name": "MidLength", "param_names": ["d26"], "plane": {"base": {"name": "XZ", "type": "origin"}, "distance": "-batt_len / 2", "type": "offset"}, "suppressed": false, "type": "construction_plane"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"features": ["PleatCut", "PleatNear"], "id": 13, "name": "PleatFar", "plane": {"name": "MidLength", "type": "construction"}, "suppressed": false, "type": "mirror"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "edge_names": ["F2:side:l5@F5.1|F2:side:l6@F5.1", "F2:side:l1@F5.1|F2:side:l6@F5.1", "F2:side:l1@F5.1|F2:side:l2@F5.1", "F2:side:l2@F5.1|F2:side:l3@F5.1", "F6:inner:F2:side:l5@F5.1|F6:inner:F2:side:l6@F5.1", "F6:inner:F2:side:l1@F5.1|F6:inner:F2:side:l6@F5.1", "F6:inner:F2:side:l1@F5.1|F6:inner:F2:side:l2@F5.1", "F6:inner:F2:side:l2@F5.1|F6:inner:F2:side:l3@F5.1"], "edge_refs": [{"dir": [0.0, -1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, -1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, 1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, -1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, 1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, 1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, -1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.0, 1.0, 0.0], "max": [158.08338344416106, 14.97245064486031, 95.00000000000003], "min": [-158.0833834441611, -212.97245548710006, -0.0005980913533997968]}], "edges": [[-158.0834, -101.75, 26.6874], [-147.5738, -101.75, 95.0], [147.088, -99.0, 95.0], [158.0834, -99.0, 65.3126], [-155.0, -101.75, 27.0], [-145.0, -101.75, 92.0], [145.0, -99.0, 92.0], [155.0, -99.0, 65.0]], "id": 14, "name": "FilletBig", "param_names": ["d27"], "radius": "r_big", "suppressed": false, "type": "fillet"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "edge_names": ["F2:side:l2@F5.1|F2:start@F5.1", "F2:side:l3@F5.1|F2:start@F5.1", "F2:side:l5@F5.1|F2:start@F5.1", "F2:side:l6@F5.1|F2:start@F5.1", "F2:side:l1@F5.1|F2:start@F5.1"], "edge_refs": [{"dir": [0.34731435582359377, 0.0, -0.9377487607237037], "max": [157.9189160095873, 14.97245064486031, 95.00000000000003], "min": [-157.9189160095873, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.1520571842539413, 6.854850442197856e-18, -0.9883716976506173], "max": [157.9189160095873, 14.97245064486031, 95.00000000000003], "min": [-157.9189160095873, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.3473143558235947, 0.0, 0.9377487607237034], "max": [157.9189160095873, 14.97245064486031, 95.00000000000003], "min": [-157.9189160095873, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.15205718425394107, 6.990187846251234e-18, 0.9883716976506172], "max": [157.9189160095873, 14.97245064486031, 95.00000000000003], "min": [-157.9189160095873, -212.97245548710006, -0.0005980913533997968]}, {"dir": [1.0, -1.5479309295511088e-18, 0.0], "max": [157.9189160095873, 14.97245064486031, 95.00000000000003], "min": [-157.9189160095873, -212.97245548710006, -0.0005980913533997968]}], "edges": [[152.5857, 3.0, 80.1563], [153.0593, 3.0, 32.6563], [-153.1413, 3.0, 13.3437], [-152.8286, 3.0, 60.8437], [-80.0, 3.0, 95.0]], "id": 15, "name": "FilletFrontOuter", "param_names": ["d28"], "radius": "r_small", "suppressed": false, "type": "fillet"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "edge_names": ["F2:side:l3@F5.1|F4:side:l3@F5.1", "F2:side:l2@F5.1|F4:side:l3@F5.1", "F2:side:l5@F5.1|F4:side:l5@F5.1", "F2:side:l6@F5.1|F4:side:l5@F5.1", "F2:side:l1@F5.1|F4:side:l3@F5.1"], "edge_refs": [{"dir": [-0.1520571842539413, 0.0, -0.9883716976506173], "max": [157.92605659069403, 14.97245064486031, 95.00000000000003], "min": [-157.92605659069406, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.34731435582359377, 0.0, -0.9377487607237037], "max": [157.92605659069403, 14.97245064486031, 95.00000000000003], "min": [-157.92605659069406, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.3473143558235947, 0.0, 0.9377487607237034], "max": [157.92605659069403, 14.97245064486031, 95.00000000000003], "min": [-157.92605659069406, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.15205718425394107, 0.0, 0.9883716976506172], "max": [157.92605659069403, 14.97245064486031, 95.00000000000003], "min": [-157.92605659069406, -212.97245548710006, -0.0005980913533997968]}, {"dir": [1.0, 2.4463450711209976e-16, 0.0], "max": [157.92605659069403, 14.97245064486031, 95.00000000000003], "min": [-157.92605659069406, -212.97245548710006, -0.0005980913533997968]}], "edges": [[153.0593, -201.0, 32.6563], [152.5857, -201.0, 80.1563], [-153.1413, -206.5, 13.3437], [-152.8286, -206.5, 60.8437], [50.0, -201.0, 95.0]], "id": 16, "name": "FilletRearOuter", "param_names": ["d29"], "radius": "r_small", "suppressed": false, "type": "fillet"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "edge_names": ["F6:inner:F2:side:l3@F5.1|F6:inner:F2:start@F5.1", "F6:inner:F2:side:l2@F5.1|F6:inner:F2:start@F5.1", "F6:inner:F2:side:l1@F5.1|F6:inner:F2:start@F5.1", "F6:inner:F2:side:l6@F5.1|F6:inner:F2:start@F5.1", "F6:inner:F2:side:l5@F5.1|F6:inner:F2:start@F5.1"], "edge_refs": [{"dir": [0.1520571842539411, 0.0, 0.988371697650617], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.34731435582359377, 0.0, 0.9377487607237037], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-1.0, 0.0, 0.0], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.15205718425394102, 0.0, -0.9883716976506172], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.3473143558235949, 0.0, -0.9377487607237033], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}], "edges": [[149.9014, 0.0, 31.8594], [150.3792, 0.0, 77.4761], [80.0, 0.0, 92.0], [-150.2276, 0.0, 58.0208], [-149.7749, 0.0, 12.8922]], "id": 17, "name": "FilletFrontInner", "param_names": ["d30"], "radius": "r_small", "suppressed": false, "type": "fillet"}}},
|
|
{"command": "timeline.add", "params": {"feature": {"body": "Case", "edge_names": ["F6:inner:F2:side:l3@F5.1|F6:inner:F4:side:l3@F5.1", "F6:inner:F2:side:l2@F5.1|F6:inner:F4:side:l3@F5.1", "F6:inner:F2:side:l1@F5.1|F6:inner:F4:side:l3@F5.1", "F6:inner:F2:side:l6@F5.1|F6:inner:F4:side:l5@F5.1", "F6:inner:F2:side:l5@F5.1|F6:inner:F4:side:l5@F5.1"], "edge_refs": [{"dir": [0.1520571842539411, 0.0, 0.988371697650617], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.34731435582359377, 0.0, 0.9377487607237037], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-1.0, -2.4685277687458984e-16, 0.0], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [-0.15205718425394102, 0.0, -0.9883716976506172], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}, {"dir": [0.347314355823594, 0.0, -0.9377487607237036], "max": [157.92605659097126, 14.97245064486031, 95.00000000000001], "min": [-157.9260565909712, -212.97245548710006, -0.0005980913533997968]}], "edges": [[149.9014, -198.0, 31.8594], [150.3792, -198.0, 77.4761], [80.0, -198.0, 92.0], [-150.2276, -203.5, 58.0208], [-149.7749, -203.5, 12.8922]], "id": 18, "name": "FilletRearInner", "param_names": ["d31"], "radius": "r_small", "suppressed": false, "type": "fillet"}}}
|
|
]
|
|
}
|