* claim: #4003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the profile library (#4003)
The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).
- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
with defaults worked out from the profile's size, refusals that name the
dimension that does not fit, anchors and placement, and exact section
properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
density) and frame.profile.insert (draws a profile into a sketch, locked by
default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
extrusion volume, undo; catalog entries in every locale; docs/frames.md;
ROADMAP M15.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: drop the built-in T-slot profile (#4003)
Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: members along frame sketch lines (#4003)
frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:
- profile: a built-in profile, or profile_sketch, a sketch whose material
(nested loops alternating, so two circles make a tube) is the section in
its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
reopen (format: pending/frame-members.rs), and are named after the profile
(Rect Tube 40x40x3, (2)…), numbering on past names already taken.
Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: fixes from the adversarial review (#4003)
- Default member lines are what was drawn: projected and other linked curves
and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
solid.extrude's "all" does, so a section sketched on a face works; the
even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
is the base): deleting or adding a line, or deleting another feature, no
longer renames other members, and frame.member stores every name it gives.
body.rename renames a member on its line (also for later member features);
a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
parameters, bare numbers take the design's units, and they are feature
inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
given are checked by name; a radius must be 0 or at least 0.01 mm; error
messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
refused; a 3D wire that runs back on itself is not a line.
Regression tests for each, from the review's scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the Frame Member dialog on the ribbon (#4003)
- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
picked in the view (or All Lines), a built-in profile and its dimensions or
a section picked in another sketch, anchor, angle, mirror and name, with a
live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
(the dialog shows the sketch instead of picking every region, which would
fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
thickness, so they translate apart from the existing Angle, Web and Flange;
the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
command labels it spells the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>