Files
solidcraft/crates/engine/src/cmd/mod.rs
T
Nathan Dane fbd30b0bd0 Panels: inspect and change layouts through commands (#11304) (#11454)
* claim: #11218

* Panels: add shared layout rules and retained content runtime

* claim: #11304

* Panels: inspect and change layouts through shared commands (#11304)

* Panels: account for layout commands in geometry coverage
2026-11-03 13:55:50 +00:00

449 lines
16 KiB
Rust

//! The command registry. Ids are SolidCraft's own dotted ids (`solid.extrude`,
//! `sketch.rectangle.two_point`); the toolbar placement (`tab`, `panel`) follows the familiar
//! Design workspace layout.
/// The params-doc note of every command that adds sketch geometry (see `sketch::created`).
macro_rules! created_doc {
() => {
". Returns created: {points, curves, constraints, dimensions}: the ids of what it added (stable and never reused: usable right away in sketch.dimension, sketch.constraint.*, sketch.delete…)"
};
}
/// A command that is designed and registered (id, toolbar place, icon, params doc) but not built
/// yet. It is disabled with the reason, so the toolbar greys it and says why, and its `run`
/// refuses too, however it is reached. `$issue` is the GitHub issue that tracks building it.
macro_rules! planned {
($id:literal, $label:literal, $issue:literal) => {
CommandSpec::new($id, $label, |_, _| Err(crate::EngineError::Other(concat!("not supported yet: ", $label, " (issue #", $issue, ")").into())))
.enabled(|_| Err(concat!("not supported yet (issue #", $issue, ")").into()))
.planned($issue)
};
}
mod bom;
mod browser;
pub(crate) mod clearance;
mod clipboard;
mod clipboard_foreign;
mod compare;
mod compare_picture;
#[cfg(test)]
mod compare_picture_tests;
mod component;
mod component_clone;
mod component_clone_assembly;
mod construct;
mod delete;
pub(crate) mod diagnostics;
mod edit;
mod face;
mod features;
mod features_more;
mod join_pieces;
pub(crate) use construct::{GeoForm, GeoFormError, REF as GEO_REF_FORMS, SKETCH_PART, geo_form, is_model_axis, plane_axis_point_kind};
pub(crate) use face::{FaceRefForm, face_ref_form};
pub(crate) use features::profiles as feature_profiles;
pub(crate) use features::{EdgeRefForm, PLANE_FORMS, axis_dir_form, axis_line_object, edge_ref_form, explicit_plane, plane_name_problem, sketch_key};
pub use features::{auto_operation, extrude_reach, shown_scope};
pub use file::open_steps::OpenSteps;
pub use join_pieces::{Addition, addition};
pub use parts::part_length_label;
pub use sketch::dimension_roles;
pub(crate) use sketch::face::face_pick_form;
pub use sketch_construction::{
ConstructionLine, construction_line_choice, construction_line_mode, construction_line_solutions, construction_line_takes_length,
construction_segment,
};
pub use sketch_create::{tangent_arc_preview, tangent_arc_starts_at};
pub use sketch_import::drawing_import_command;
pub use sketch_modify::{extend_arc_preview, extend_preview, trim_piece};
pub use view_dxf::sketch::exportable as view_dxf_exportable;
pub(crate) use view_navigation::camera_form;
pub use view_navigation::standard_view;
mod component_link;
pub use component_link::resolve_design_links;
mod config;
mod design_link;
mod file;
mod frame;
pub(crate) mod inspect;
mod interference;
pub(crate) mod joints;
mod libraries;
pub mod mass_properties;
mod material_properties;
mod materials;
mod measure_sel;
mod measure_shape;
mod mesh;
mod metadata;
pub(crate) mod motion;
mod parts;
mod point_cloud;
mod script;
mod section;
pub mod settings;
pub(crate) use measure_sel::{measure_items, shape_of};
pub(crate) use measure_shape::Shape;
#[cfg(test)]
mod kernel_heal_tests;
mod panels;
mod parameter_sweep;
mod parameters;
mod plastic;
mod print_face;
mod render;
mod render_ui;
#[cfg(test)]
mod script_tests;
mod sheet;
pub(crate) use sheet::{
FlangeType, ThenStep, flange_edge, flange_edge_list, flange_position, flange_type, fold_points, fold_position, perforation_pattern, sheet_points,
sheet_rule_name, then_list,
};
mod silhouette;
mod sketch;
pub(crate) use sketch::author_path_for_rebind;
pub(crate) use sketch::collapse_reason;
pub(crate) use sketch::created as sketch_created;
mod canvas_sketch;
mod sketch_3d;
mod sketch_canvas;
pub mod sketch_clipboard;
mod sketch_constraints;
mod sketch_construction;
mod sketch_create;
mod sketch_ends;
mod sketch_equation;
mod sketch_freeform;
mod sketch_import;
mod sketch_inspect;
mod sketch_modify;
mod sketch_project;
mod sketch_store;
mod surface;
mod surface_analysis;
mod surface_boundary;
mod surface_match;
mod view_dxf;
mod view_navigation;
use serde::Serialize;
use serde_json::Value;
use crate::{Result, Session};
pub type Run = fn(&mut Session, &Value) -> Result<Value>;
/// A command's form for one frame of an interactive gesture: its result and the sketch it
/// changed, for [`Session::execute`] to show without evaluating the rest of the model (`None`:
/// evaluate as usual).
pub type LiveRun = fn(&mut Session, &Value) -> Result<(Value, Option<crate::LiveEdit>)>;
pub type Enabled = fn(&Session) -> std::result::Result<(), String>;
pub type SchemaFn = fn() -> schemars::Schema;
pub struct CommandSpec {
pub id: &'static str,
pub label: &'static str,
/// Toolbar tab (`SOLID`, `SKETCH`…); empty = not on the toolbar.
pub tab: &'static str,
/// Toolbar panel (`CREATE`, `MODIFY`…).
pub panel: &'static str,
/// Icon name for the UI (drawn in code).
pub icon: &'static str,
pub shortcut: Option<&'static str>,
/// One-line parameter documentation.
pub params: &'static str,
pub enabled: Enabled,
pub run: Run,
pub undoable: bool,
/// What runs instead of `run` when the command is given `live: true` (a frame of an
/// interactive gesture, see [`Session::execute`]).
pub live: Option<LiveRun>,
/// Reads the evaluated model (the default). A command that reads only the document and the
/// session's history runs on a model left stale by a live gesture without evaluating it first.
pub reads_model: bool,
/// Registered but not built yet (see `planned!`): the GitHub issue number that tracks it.
pub planned: Option<&'static str>,
/// The command's typed parameter contract, which carries its input schema; `None` until
/// the command is converted (see `crate::schema`).
pub contract: Option<&'static dyn crate::schema::Contract>,
/// The JSON Schema of a successful result; `None` until described.
pub output: Option<SchemaFn>,
}
impl CommandSpec {
pub const fn new(id: &'static str, label: &'static str, run: Run) -> Self {
CommandSpec {
id,
label,
tab: "",
panel: "",
icon: "",
shortcut: None,
params: "",
enabled: always,
run,
undoable: true,
live: None,
reads_model: true,
planned: None,
contract: None,
output: None,
}
}
/// Not built yet; `issue` tracks building it.
pub const fn planned(mut self, issue: &'static str) -> Self {
self.planned = Some(issue);
self
}
/// Takes `live: true`, run by `run`.
pub const fn live(mut self, run: LiveRun) -> Self {
self.live = Some(run);
self
}
/// Reads only the document (and history), never the evaluated model.
pub const fn doc_only(mut self) -> Self {
self.reads_model = false;
self
}
pub const fn at(mut self, tab: &'static str, panel: &'static str) -> Self {
self.tab = tab;
self.panel = panel;
self
}
pub const fn icon(mut self, i: &'static str) -> Self {
self.icon = i;
self
}
pub const fn key(mut self, k: &'static str) -> Self {
self.shortcut = Some(k);
self
}
/// The command's typed parameter contract (see `crate::schema`).
pub const fn contract(mut self, c: &'static dyn crate::schema::Contract) -> Self {
self.contract = Some(c);
self
}
/// The JSON Schema of a successful result.
pub const fn output(mut self, f: SchemaFn) -> Self {
self.output = Some(f);
self
}
pub const fn params(mut self, p: &'static str) -> Self {
self.params = p;
self
}
pub const fn enabled(mut self, e: Enabled) -> Self {
self.enabled = e;
self
}
pub const fn noundo(mut self) -> Self {
self.undoable = false;
self
}
/// Run inside another command: when it is enabled, its `run` (the caller's command owns the
/// undo step and the evaluation).
pub(crate) fn run_nested(&self, s: &mut Session, p: &Value) -> Result<Value> {
(self.enabled)(s).map_err(|why| crate::EngineError::Disabled(self.id.to_string(), why))?;
let r = (self.run)(s, p);
// A parameter error that did not name the command names it here (see `Session::execute`).
match r {
Err(crate::EngineError::BadParams { cmd, msg }) if cmd.is_empty() => Err(crate::EngineError::BadParams { cmd: self.id.to_string(), msg }),
other => other,
}
}
/// The refusal this command gives when it is not available in this session: none when it
/// is. It is the engine's own wording (`EngineError::Disabled`), so a caller that only has
/// the message can tell it from a failure of the command itself.
pub fn disabled_refusal(&self, s: &Session) -> Option<String> {
(self.enabled)(s).err().map(|why| crate::EngineError::Disabled(self.id.to_string(), why).to_string())
}
pub fn info(&self, s: &Session) -> CommandInfo {
let e = (self.enabled)(s);
let (label, icon) = match self.id {
"inspect.colored_components" if s.colored_components.is_some() => ("Disable Component Colors", "colored_components_off"),
_ => (self.label, self.icon),
};
CommandInfo {
id: self.id,
label,
tab: self.tab,
panel: self.panel,
icon,
shortcut: self.shortcut,
params: self.params,
enabled: e.is_ok(),
disabled_reason: e.err(),
planned: self.planned,
}
}
}
#[derive(Clone, Debug, Serialize)]
pub struct CommandInfo {
pub id: &'static str,
pub label: &'static str,
pub tab: &'static str,
pub panel: &'static str,
pub icon: &'static str,
pub shortcut: Option<&'static str>,
pub params: &'static str,
pub enabled: bool,
pub disabled_reason: Option<String>,
#[serde(skip_serializing_if = "Option::is_none")]
pub planned: Option<&'static str>,
}
pub fn always(_: &Session) -> std::result::Result<(), String> {
Ok(())
}
pub fn in_sketch(s: &Session) -> std::result::Result<(), String> {
if s.active_sketch.is_some() { Ok(()) } else { Err("no sketch is being edited (Create Sketch or Edit Sketch first)".into()) }
}
/// The mirror of [`in_sketch`], for a command that acts on bodies and has nothing to offer the
/// geometry under the cursor while a sketch is open.
pub fn not_in_sketch(s: &Session) -> std::result::Result<(), String> {
if s.active_sketch.is_none() { Ok(()) } else { Err("a sketch is being edited (this works on bodies: Finish Sketch first)".into()) }
}
/// Every command, in toolbar order.
pub fn command_specs() -> Vec<&'static CommandSpec> {
let mut v: Vec<&'static CommandSpec> = Vec::new();
v.extend(sketch::COMMANDS.iter());
v.extend(sketch_create::COMMANDS.iter());
v.extend(sketch_construction::COMMANDS.iter());
v.extend(sketch_equation::COMMANDS.iter());
v.extend(sketch_constraints::COMMANDS.iter());
v.extend(sketch_import::COMMANDS.iter());
v.extend(sketch_inspect::COMMANDS.iter());
v.extend(sketch_ends::COMMANDS.iter());
v.extend(sketch_canvas::COMMANDS.iter());
v.extend(canvas_sketch::COMMANDS.iter());
v.extend(point_cloud::COMMANDS.iter());
v.extend(sketch_3d::COMMANDS.iter());
v.extend(surface_analysis::COMMANDS.iter());
v.extend(surface_boundary::COMMANDS.iter());
v.extend(surface::COMMANDS.iter());
v.extend(surface_match::COMMANDS.iter());
v.extend(sketch_modify::COMMANDS.iter());
v.extend(sketch_project::COMMANDS.iter());
v.extend(features::COMMANDS.iter());
v.extend(features_more::COMMANDS.iter());
v.extend(mesh::COMMANDS.iter());
v.extend(construct::COMMANDS.iter());
v.extend(sheet::COMMANDS.iter());
v.extend(plastic::COMMANDS.iter());
v.extend(frame::COMMANDS.iter());
v.extend(component::COMMANDS.iter());
v.extend(component_link::COMMANDS.iter());
v.extend(joints::COMMANDS.iter());
v.extend(clearance::COMMANDS.iter());
v.extend(motion::COMMANDS.iter());
v.extend(panels::COMMANDS.iter());
v.extend(config::COMMANDS.iter());
v.extend(parts::COMMANDS.iter());
v.extend(bom::COMMANDS.iter());
v.extend(mass_properties::COMMANDS.iter());
v.extend(browser::COMMANDS.iter());
v.extend(delete::COMMANDS.iter());
v.extend(edit::COMMANDS.iter());
v.extend(clipboard::COMMANDS.iter());
v.extend(sketch_clipboard::COMMANDS.iter());
v.extend(script::COMMANDS.iter());
v.extend(parameters::COMMANDS.iter());
v.extend(parameter_sweep::COMMANDS.iter());
v.extend(file::COMMANDS.iter());
v.extend(print_face::COMMANDS.iter());
v.extend(metadata::COMMANDS.iter());
v.extend(inspect::COMMANDS.iter());
v.extend(compare::COMMANDS.iter());
v.extend(compare_picture::COMMANDS.iter());
v.extend(silhouette::COMMANDS.iter());
v.extend(materials::COMMANDS.iter());
v.extend(material_properties::COMMANDS.iter());
v.extend(libraries::COMMANDS.iter());
v.extend(section::COMMANDS.iter());
v.extend(view_navigation::COMMANDS.iter());
v.extend(view_dxf::COMMANDS.iter());
v.extend(settings::COMMANDS.iter());
v.extend(diagnostics::COMMANDS.iter());
v.extend(render::COMMANDS.iter());
v.extend(render_ui::COMMANDS.iter());
v
}
pub fn find_command(id: &str) -> Option<&'static CommandSpec> {
let all = command_specs();
all.iter().find(|c| c.id == id).or_else(|| all.iter().find(|c| c.id.eq_ignore_ascii_case(id))).copied()
}
/// The end of an unknown command's error: up to three ids like `id`, nearest first. Ids a few
/// letters away (`solid.extrud` → `solid.extrude`) come before ids that end in the same word
/// (`file.open` → `doc.open`). Empty when nothing is close.
pub(crate) fn did_you_mean(id: &str) -> String {
let id = id.to_ascii_lowercase();
if id.len() > 64 {
return String::new();
}
let last = |s: &str| s.rsplit('.').next().unwrap_or(s).to_string();
let near = (id.chars().count() / 4).max(2);
let mut found: Vec<(bool, usize, &str)> = command_specs()
.iter()
.filter_map(|c| {
let d = edit_distance(&id, c.id);
(d <= near || last(&id) == last(c.id)).then_some((d > near, d, c.id))
})
.collect();
found.sort();
let ids: Vec<String> = found.iter().take(3).map(|(_, _, c)| format!("`{c}`")).collect();
match ids.as_slice() {
[] => String::new(),
[one] => format!(" (did you mean {one}?)"),
[rest @ .., end] => format!(" (did you mean {} or {end}?)", rest.join(", ")),
}
}
/// "no body `name`", and the closest of `bodies` when it is near enough to be a typo or another
/// case of the same name (`b` for `B`): `no body `Bdy`; did you mean `Body`?` (#9740).
pub(crate) fn no_body<'a>(name: &str, bodies: impl IntoIterator<Item = &'a str>) -> String {
let want = name.to_lowercase();
let near = (want.chars().count() / 3).max(1);
let closest = (want.len() <= 256)
.then(|| bodies.into_iter().map(|b| (edit_distance(&want, &b.to_lowercase()), b)).filter(|(d, _)| *d <= near).min_by_key(|(d, _)| *d))
.flatten();
match closest {
Some((_, b)) => format!("no body `{name}`; did you mean `{b}`?"),
None => format!("no body `{name}`"),
}
}
/// Levenshtein distance: the single-character edits that turn `a` into `b`.
pub(crate) fn edit_distance(a: &str, b: &str) -> usize {
let b: Vec<char> = b.chars().collect();
let mut row: Vec<usize> = (0..=b.len()).collect();
for (i, ca) in a.chars().enumerate() {
let mut prev = row[0];
row[0] = i + 1;
for (j, cb) in b.iter().enumerate() {
let next = (prev + usize::from(ca != *cb)).min(row[j] + 1).min(row[j + 1] + 1);
prev = row[j + 1];
row[j + 1] = next;
}
}
row[b.len()]
}
pub(super) fn alignment_param(p: &Value, key: &str, cmd: &str) -> Result<solidcraft_sketch::PatternAlignment> {
p.get(key).map_or(Ok(solidcraft_sketch::PatternAlignment::default()), |value| {
serde_json::from_value(value.clone()).map_err(|_| crate::params::bad(cmd, format!("`{key}` must be left, center or right")))
})
}
pub(super) fn reversed_param(p: &Value, key: &str, cmd: &str) -> Result<bool> {
p.get(key).map_or(Ok(false), |value| {
serde_json::from_value(value.clone()).map_err(|_| crate::params::bad(cmd, format!("`{key}` must be true or false")))
})
}