Rig (fillets/KNOWN_FAILING.solidcore): the two 851 rows develop now rounds with their tangent chain fail 1001 as on SMLib; the pipe on a plate's curvature round is graded to 5e8c9c1's section, which solidcore has yet to port. Tests (KNOWN_FAILING_TESTS): main's box STL and boss-torus tests, as on SMLib; the box-corner test and four C++ comparisons that expect 5e8c9c1's Ball corners and rounds. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
38 lines
6.5 KiB
Plaintext
38 lines
6.5 KiB
Plaintext
# The fillets cases that fail today on solidcore, one a line: `<case> <why it fails today>`. Sorted.
|
|
# The kernel rig gate fails on a case that fails and is not listed, and on a listed case that passes.
|
|
# Baseline: solidcore pin de85a3e00, tests/kernel-cases run by `cargo xtask kernel-cases`, x86_64 Linux.
|
|
1080-fillet-equal-slope-basin-1-mm-rim-loop-4 [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam
|
|
1080-fillet-sloped-basin-1-mm-rim-r4-2-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam
|
|
1080-fillet-sloped-basin-1-mm-rim-r4-4-edges [fail] continuity_order: got {'body': 'Slab', 'edges': 'blend', 'order': 'g0', want >= g1 at every blend seam
|
|
1207-fillet-bar-top-edge-after-boss-arc-round-r0-5 [fail] step 4 (solid.fillet): body `Arm`: the operation failed: SMLib fillet: SMLib's check refuses the result: 5 failed tests: SmBSplineCurve::Test #15 Bad Repeated CPts: BSplineCurve has Internal Coincident ControlPoints (causes
|
|
2893-chamfer-distance-and-angle-past-the-wall-refused [fail] refused, but not because "angle": step 2 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT)
|
|
2893-chamfer-two-distances-elliptical-rim [fail] refused, but not because "not supported yet": step 3 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001) (tangent propagation blended the picked edges' tangent chain with them; with it off, tangent_chain:
|
|
4782-fillet-bar-edge-wider-than-both-faces [fail] continuity_order: got Box: no null seams want >= g1 at every blend seam
|
|
5158-fillet-round-just-past-a-10mm-face [fail] step 2 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001)
|
|
851-fillet-arc-then-top-front [fail] fillet status 1001, as on SMLib 5e8c9c1 (see KNOWN_FAILING): with tangent_chain true since 21f00a917 the top front edge's chain takes the arc round's end curve, where the R2 ball sits on that round's centre circle (a torus of tube-centre radius 0, the three-edge rolling-ball corner)
|
|
851-fillet-top-front-then-upright [fail] fillet status 1001, as on SMLib 5e8c9c1 (see KNOWN_FAILING): with tangent_chain true since 21f00a917 the upright's chain takes the first round's end curve, where the R2 ball sits on that round's axis (a torus of tube-centre radius 0, the three-edge rolling-ball corner)
|
|
9-fillet-corner-curvature-with-reduce-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only
|
|
9-fillet-corner-curvature-with-taper-fit [unsupported] solid.fillet builds `corner: g2` with `fit: exact` only
|
|
cov-fillet-g2-corner-beside-a-cylinder [fail] step 6 (solid.fillet): the open setback corner is not a closed solid, as on SMLib d01d7b0
|
|
cov-fillet-g2-five-edge-apex-corner [fail] step 12 (solid.fillet): invalid input: the setback must be more than 3.5056 mm at the corner (-0.000, 0.000, 30.000): the rounds' contact lines meet 3
|
|
cov-fillet-g2-four-edge-apex-corner [fail] step 11 (solid.fillet): invalid input: the setback must be more than 3.9027 mm at the corner (0.000, 0.000, 30.000): the rounds' contact lines meet 3.
|
|
cov-fillet-g2-mixed-corner [unsupported] refused as on SMLib d01d7b0: a G2 corner is set back only where every edge meeting it is rounded and all are convex or all concave
|
|
cov-fillet-g2-oblique-three-edge-corner [unsupported] refused on solidcore: its three edges meet at different wedge angles, and one curvature fillet takes the first edge's equal-area thumbweight for every edge (solidcore#2250, issuecomment-6563419897); SMLib d01d7b0 fails it too (see KNOWN_FAILING)
|
|
cov-fillet-g2-pocket-corner [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING)
|
|
cov-fillet-section-curvature-pipe-on-plate-r2 [fail] solidcore builds the order-2 section as SMLib d01d7b0 did (40302.5908, G2 on both seams); the case now grades SMLib 5e8c9c1's section, the round as its definition, G3 on the pipe and 40307.8856 (fork 4a10ed8 and 79db628, to be ported in solidcore#2273)
|
|
cov-fillet-turn-swept-boss-base-r1 [fail] as on SMLib: solid.fillet has no `turn`; the corners are mitred (12508.9675, the Mitre case's volume)
|
|
cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 [fail] as on SMLib: solid.fillet has no `turn`, so the sharp concave corners are mitred, not refused
|
|
cov-junction-boss-tilt-20-root-round [fail] fillet status 1001 on a cylinder tilted 20 degrees into the plate, as on SMLib
|
|
cov-junction-boss-tilt-40-root-round [fail] fillet status 1001 on a cylinder tilted 40 degrees into the plate, as on SMLib
|
|
cov-junction-tee-equal-round [fail] the result is not a closed solid, as on SMLib: equal pipes' intersection is two plane ellipses crossing, a corner the old corner code cannot join (the corner step)
|
|
cov-junction-y-junction-120-round [unsupported] refused as on SMLib: the faces between the three intersection curves narrow to nothing at the two triple points, so the room check trips (the corner step)
|
|
report-drafted-peg-front-and-concave-rounds-together-r2 [unsupported] step 13 (solid.fillet): invalid input: not supported yet: the fillet meets a corner of this kind, which SMLib's blends do not handle yet (where its ed
|
|
report-fillet-concave-arc-and-front-top-edge-together-r5-solver-residues [fail] bbox.min: got [0.4892940775280783, 0.05636444090890084, 0.0] want [0.4892940775280783, 0.05792545052986289, 0.0]
|
|
report-fillet-concave-arc-and-front-top-edge-together-r7-solver-residues [fail] bbox.min: got [0.4892940775169876, 0.02441657049978923, 0.0] want [0.4892940775280783, 0.05792545052986289, 0.0]
|
|
report-fillet-curvature-three-edges-at-bar-corner [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING)
|
|
report-fillet-curvature-three-edges-at-bar-corner-solver-residues [fail] continuity_order: G1 at one seam where the corner patch meets a contact face (g2 wanted), as on SMLib d01d7b0 (see KNOWN_FAILING)
|
|
report-peg-front-and-concave-chamfers-together-d2 [fail] step 13 (solid.chamfer): SMLib chamfer: operation: SMLib failed (status 1001)
|
|
report-peg-front-and-concave-rounds-together-r2 [fail] continuity_order: got {'body': 'Peg', 'edges': 'blend', 'order': 'g0', ' want >= g1 at every blend seam
|
|
report-peg-front-and-concave-rounds-together-r5 [fail] continuity_order: got {'body': 'Peg', 'edges': 'blend', 'order': 'g0', ' want >= g1 at every blend seam
|
|
report-peg-step-front-and-concave-rounds-together-r2 [fail] continuity_order: got {'body': 'Peg', 'edges': 'blend', 'order': 'g0', ' want >= g1 at every blend seam
|