* claim: #11103
* Hole: Bridge option for counterbores (#11103)
A counterbore hole takes an optional `bridge` length: two 3D-printing
layers that thick below the counterbore's floor, a slot along X across
the counterbore and then a square, both 0.02 mm wider than the hole, so
a printer bridges the step instead of sagging into it. Empty (the
default) keeps a plain counterbore.
The clearance keeps the bore, cut straight through both layers as for a
plain counterbore, clear of their sides: at exactly the hole's width it
ran tangent along them and broke through. The command and the geometry
refuse a layer that is not a positive length, layers that don't fit in
the hole below the counterbore, and a bridge on any other hole type.
The Hole dialog shows a Bridge field below Drill Point for counterbores.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: translate the Bridge label for the complete catalogs (#11103)
Arabic, Hebrew, Japanese, Vietnamese and Chinese carry every English
message, so `cargo xtask i18n --check` needs the new label in each.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Hole: bridged counterbores refuse layers past a through hole's exit, too narrow a counterbore and a malformed bridge (#11103)
- Through all, the second bridge layer must end inside a body (exact point classification),
short of the exit face; the tool's reach is no measure of the material.
- A bridged counterbore must be at least 0.04 mm wider than the hole, so the slot's ends have
room on its wall (no square root of a negative number reaches the extrude).
- `solid.hole` refuses a `bridge` that is given but not a length expression (`true`, `[]`, `""`)
instead of making a plain counterbore; `null` still leaves it out.
- Loop2 and Seg2 now come from solidcore_record (main moved them).
- The "nothing saved" check looks for the `"bridge"` key: `format_pending` names
`bridged-counterbore` in every design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Unit defaults test: solid.hole has the bridge field too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>