[ { "source": "tangency-labs/solidcraft#4155", "why": "user error: an edge flange on a body that is not sheet metal (\"there is no sheet metal body\"), working as designed; no geometry to grade" }, { "source": "tangency-labs/solidcraft#4100", "why": "assembly bookkeeping when deleting an inserted STEP, no geometry" }, { "source": "tangency-labs/solidcraft#4094", "why": "feature request: a contour flange that joins an existing sheet; the chained edge flange workaround it describes already builds, so there is no failing geometry" }, { "source": "tangency-labs/solidcraft#3819", "why": "sketch pattern preview, UI only" }, { "source": "tangency-labs/solidcraft#3722", "why": "origin plane colours, UI only" }, { "source": "tangency-labs/solidcraft#3719", "why": "feature request for cables, not sheet metal geometry" }, { "source": "tangency-labs/solidcraft#3516", "why": "feature request: an edge flange extent defined by vertices or edges; no failing geometry" }, { "source": "tangency-labs/solidcraft#3502", "why": "user error: an edge flange on a body that is not sheet metal (\"there is no sheet metal body\"), working as designed; no geometry to grade" }, { "source": "tangency-labs/solidcraft#3500", "why": "user error: an edge flange on a body that is not sheet metal (\"there is no sheet metal body\"), working as designed; no geometry to grade (the report has no steps at all)" }, { "source": "tangency-labs/solidcraft#3370", "why": "other area: fillets" }, { "source": "tangency-labs/solidcraft#3187", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#3170", "why": "feature request: overlapping corner joins (butt, partial or full overlap); nothing to compare against yet" }, { "source": "tangency-labs/solidcraft#3154", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild" }, { "source": "tangency-labs/solidcraft#2987", "why": "user error: an edge flange on a body that is not sheet metal (\"there is no sheet metal body\"), working as designed; no geometry to grade" }, { "source": "tangency-labs/solidcraft#2763", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#2732", "why": "feature wish list for flange parameters, no geometry" }, { "source": "tangency-labs/solidcraft#2729", "why": "feature request: per-segment flanges on one edge, no failing geometry" }, { "source": "tangency-labs/solidcraft#2621", "why": "sketch dragging behaviour, no solid geometry" }, { "source": "tangency-labs/solidcraft#2399", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild (a small body joined at a sheet corner, then flanged)" }, { "source": "tangency-labs/solidcraft#2298", "why": "chat backend, no geometry" }, { "source": "tangency-labs/solidcraft#2286", "why": "chat UI, no geometry" }, { "source": "tangency-labs/solidcraft#2272", "why": "face naming, no geometry" }, { "source": "tangency-labs/solidcraft#2009", "why": "no repro that fixes a right answer: screenshots of an extrude joined to a flange and a chamfer; the flat pattern part is the refusal in #3324" }, { "source": "tangency-labs/solidcraft#1603", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild (a folded drip tray edited through its parameters)" }, { "source": "tangency-labs/solidcraft#1483", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#1475", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild" }, { "source": "tangency-labs/solidcraft#1391", "why": "other area: booleans (a prism joined flush to a lofted tube's end face: Union: no result)" }, { "source": "tangency-labs/solidcraft#1326", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild" }, { "source": "tangency-labs/solidcraft#1325", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild" }, { "source": "tangency-labs/solidcraft#1284", "why": "flat-pattern DXF output only, no solid geometry" }, { "source": "tangency-labs/solidcraft#1231", "why": "a user's design: only the refused selection is recorded, no geometry to rebuild" }, { "source": "tangency-labs/solidcraft#1089", "why": "flat-pattern DXF output only, no solid geometry" }, { "source": "tangency-labs/solidcraft#758", "why": "feature specification for surface.offset, no failing geometry" }, { "source": "tangency-labs/solidcraft#732", "why": "perforation: the hole count follows the layout (staggered or square, margins), which has no closed form; the cut budget part is graded in 529-a-hundred-slots-and-four-folds" }, { "source": "tangency-labs/solidcraft#622", "why": "UI only, the agent cursor's menus" }, { "source": "tangency-labs/solidcraft#602", "why": "other area: threads (threads on objects, crash)" }, { "source": "tangency-labs/solidcraft#566", "why": "other area: shell (a swept bar and sheet metal parts refused by shell)" }, { "source": "tangency-labs/solidcraft#535", "why": "face naming, no geometry" }, { "source": "tangency-labs/solidcraft#533", "why": "assemblies: inserting a design as a linked component, not geometry" }, { "source": "tangency-labs/solidcraft#495", "why": "sketch attachment to thickness faces, not geometry" }, { "source": "tangency-labs/solidcraft#470", "why": "sketch attachment to a sheet panel, not geometry" }, { "source": "tangency-labs/solidcraft#391", "why": "other area: booleans (a text deboss cut on a filleted and shelled body: boolean Cut, no result)" }, { "source": "tangency-labs/solidcraft#390", "why": "other area: booleans (a draft on a flange end face)" }, { "source": "tangency-labs/solidcraft#271", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#59", "why": "the hem's default side is the owner's decision (the oracle case 73-sm-hem fixes it inward); no right answer to grade" }, { "source": "tangency-labs/solidcraft#50", "why": "UI only, no geometry (viewport highlight)" }, { "source": "tangency-labs/solidcraft#40", "why": "sketch projection ids, not geometry" }, { "source": "tangency-labs/solidcraft#30", "why": "profile picks by index, not geometry" }, { "source": "tangency-labs/solidcraft#4096", "why": "open draft for the contour flange request #4094; a feature, no failing geometry" }, { "source": "tangency-labs/solidcraft#3946", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#3937", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#3908", "why": "other area: fillets (chamfering the rims of a flange's holes; closed unmerged)" }, { "source": "tangency-labs/solidcraft#3581", "why": "sketch move, no solid geometry" }, { "source": "tangency-labs/solidcraft#3472", "why": "open pull request for the overlap corner join feature #3170; a feature, no failing geometry" }, { "source": "tangency-labs/solidcraft#3439", "why": "sketch dimensions, no solid geometry" }, { "source": "tangency-labs/solidcraft#3397", "why": "assembly joint drive, no geometry" }, { "source": "tangency-labs/solidcraft#3188", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#2894", "why": "other area: fillets (chamfers past the faces)" }, { "source": "tangency-labs/solidcraft#2409", "why": "construction geometry references, not solid geometry" }, { "source": "tangency-labs/solidcraft#2275", "why": "face naming, no geometry" }, { "source": "tangency-labs/solidcraft#1929", "why": "robustness goldens, test infrastructure" }, { "source": "tangency-labs/solidcraft#1851", "why": "robustness goldens, test infrastructure" }, { "source": "tangency-labs/solidcraft#1683", "why": "parameter references of hole positions, no failing geometry" }, { "source": "tangency-labs/solidcraft#1556", "why": "other area: booleans (the retry for #1391)" }, { "source": "tangency-labs/solidcraft#1501", "why": "parameter references of a mirror plane's origin, no failing geometry" }, { "source": "tangency-labs/solidcraft#1484", "why": "UI only, no geometry" }, { "source": "tangency-labs/solidcraft#1446", "why": "other area: booleans (a text cut in one exact boolean)" }, { "source": "tangency-labs/solidcraft#1324", "why": "flat-pattern DXF output only, no solid geometry" }, { "source": "tangency-labs/solidcraft#1251", "why": "test infrastructure (feature walks)" }, { "source": "tangency-labs/solidcraft#1041", "why": "perforation field: the hole count follows the layout (margins to the outline and bends), no closed form" }, { "source": "tangency-labs/solidcraft#982", "why": "test infrastructure (offline web test)" }, { "source": "tangency-labs/solidcraft#956", "why": "other area: sweeps (loft vertex pairing)" }, { "source": "tangency-labs/solidcraft#894", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#893", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#889", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#888", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#700", "why": "file format and naming, no geometry" }, { "source": "tangency-labs/solidcraft#677", "why": "face attachments of sheet metal features, not geometry" }, { "source": "tangency-labs/solidcraft#607", "why": "the bend table and bend lines after cut-outs: bend table values are not a graded quantity of the rig" }, { "source": "tangency-labs/solidcraft#539", "why": "face naming (an ignored regression test), no geometry" }, { "source": "tangency-labs/solidcraft#534", "why": "assemblies: an ignored regression test for #533, not geometry" }, { "source": "tangency-labs/solidcraft#482", "why": "file format note, no geometry" }, { "source": "tangency-labs/solidcraft#474", "why": "sketch attachment to a sheet panel, not geometry" }, { "source": "tangency-labs/solidcraft#299", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#286", "why": "docs wording only" }, { "source": "tangency-labs/solidcraft#118", "why": "other area: booleans (error messages of a failed boolean)" }, { "source": "tangency-labs/solidcraft#117", "why": "profile picks by curves, not geometry" }, { "source": "tangency-labs/solidcraft#2461", "why": "auto-report with command parameters only (an extrude cut on a face of a sheet metal bracket refused for touching a bend); the bracket is not in the report and the refusal is the documented behaviour, no number to grade" }, { "source": "tangency-labs/solidcraft#3680", "why": "auto-report with command parameters only (a 5 mm drilled hole at one point of a sheet metal bracket, refused as unsupported 3D machining); no design, and holes in flat sheet are covered by 560 and 955" } ]