# Cylindrical coffee housing variant Use `coffee-cylinder-sweep.json` with `coffee-cylinder-render.json` for the continuous CAD cyclorama. `coffee-cylinder.json` is the flat-floor counterpart. These are separate original variants of the closer, lower coffee framing. Regenerate with `python examples/studio/author_coffee_cylinder.py` after placing the framing recipes beside the authoring tool. Three existing bodies receive cylindrical CAD construction. The plinth is an R76 mm cylinder at [0, 8, 30], 12 mm high. The tall housing has R70 mm outside and R65 mm inside, from Z55 to Z265. Its through-cavity cutter extends 1 mm past both ends to avoid coincident boolean caps. The round shoulder is R70 mm, from Z265 to Z273. All three share the same XY axis at [0, 8]. The visible outer skin is an analytic cylinder with a continuous broad curved silhouette. The open brewing bay removes X[-47,47], Y[-80,0], Z[88,237] mm from the annular shell. It opens the front wall while retaining side cheeks, a 33 mm lower band and a 28 mm upper band. There are no new decorative parts. The separate head, bent chrome lever and ball ends, tank, ribbed bin, perforated grate, service panel, screws, cable and plug retain the framing recipe's geometry and moves. The expected final body list remains the 32 names in the `coffee-exploded` entry of `materials.json`, in exactly that order. Replacing the three original sketch/extrude blocks creates no temporary additional bodies. The seven coating overrides and two closed-mesh dielectric overrides retain their named ordinals. The render request is copied byte-for-byte from `coffee-framing-render.json`, including the corrected fill, 1920x1080 camera, 256 samples and depth 12. This is independently authored SolidCraft geometry under MIT OR Apache-2.0. No reference models, image assets, logos, product-specific detailing or triangle soups are imported. Dimensions describe an original generic appliance study. CAD replay, actual `render.scene` body-order checks, material validation and rendered visual review are pending. Source command inspection alone does not establish successful booleans or the quality of the glossy cylindrical result.