//! Inspection: measure bodies, describe the document, sketches and model topology.
use std::collections::BTreeMap;
use std::hash::{BuildHasher, RandomState};
use std::sync::atomic::{AtomicU64, Ordering};
use std::sync::{Arc, OnceLock, Weak};
use serde_json::{Value, json};
use solidcraft_sketch::CurveKind;
use super::CommandSpec;
use crate::params::{bad, bool_, str_, string_list};
use crate::{EngineError, Result, Session};
#[path = "appearance_chain.rs"]
mod appearance_chain;
pub static COMMANDS: &[CommandSpec] = &[
CommandSpec::new("inspect.colored_components", "Enable Component Colors", colored_components)
.at("SOLID", "INSPECT").icon("colored_components").noundo()
.params("enabled?: bool (omitted: toggle); temporary component colours, without changing appearances"),
CommandSpec::new("inspect.measure", "Measure", measure)
.at("SOLID", "INSPECT")
.icon("measure")
.key("I")
.noundo()
.params("bodies?: [names] (default all) → closed per body; volume_mm3, center_of_mass, density_g_cm3 and mass_g only for closed, consistently oriented bodies; area, bbox and counts for all; total.open_bodies_skipped counts bodies excluded from volume/mass totals; or items: [1-2 selections] (face/edge: type, body, point; index optional) → length/area/volume; diameter, radius, circumference or arc_length/angle_deg of circles, arcs and cylinders; slot sizes; min (distance_mm, from, to), max, center_distance (centre to centre, or from an axis) and angle"),
CommandSpec::new("document.inspect", "Inspect Design", inspect).icon("inspect").noundo().params("measure?: bool (include body measurements)"),
CommandSpec::new("document.revision", "Design Revision", revision).icon("inspect").noundo().params(
"→ document_id (this open design's id: kept while it stays open, another for each design started or opened), \
revision (moves whenever the design, what is hidden or a component's uncaptured position changes, \
never on a selection or a view; from one counter for the whole run, so it never repeats). Read-only",
),
CommandSpec::new("sketch.inspect", "Inspect Sketch", sketch_inspect).icon("inspect").noundo().params("sketch?: id|name (default active)"),
CommandSpec::new("model.edges", "List Edges", model_edges).icon("inspect").noundo().params("body: name"),
CommandSpec::new("model.faces", "List Faces", model_faces).icon("inspect").noundo().params(
"body: name → per face: index, name (what face.delete, sheet.convert `face`, solid.shell … take in place of a point), exact, area, centroid (not always on the face), \
plane_normal, point (a point on the face that picks it), cylinder? ({origin, axis, radius} of a cylindrical face), \
sheet_face? (a folded sheet's face: `sheet:
::`, panel base or a flange's tag F., side top | bottom | rim. | bend.inner | bend.outer; \
taken wherever a face name is, and it holds while sizes change and flanges come and go)",
),
CommandSpec::new("model.threads", "List Threads", model_threads).icon("inspect").noundo(),
CommandSpec::new("material.assign", "Physical Material", physical_material)
.at("SOLID", "MODIFY")
.icon("material")
.params("bodies: [names]; material: name (Steel, Aluminum, ABS Plastic, …, or one made with material.create; `material.list`)"),
CommandSpec::new("appearance.assign", "Appearance", appearance).at("SOLID", "MODIFY").icon("appearance").key("A").params(
"bodies?: [names]; faces?: [[x,y,z] on faces] (body?: which body, default the nearest); components?: [names or ids, or occurrence names]; \
appearance?: library name or stable starter.* ID (appearance.library) | color: \"#rrggbb\" or [r, g, b] (0–255), opacity? (0–1, default 1); \
name?: inert copied look label (requires color, mutually exclusive with appearance); pbr?: {metallic:0..1, roughness:0.045..1, dielectric_ior:1..3} (requires color/appearance and opacity 1); a starter ID or registered starter name resolves its recipe before color overrides; omitted pbr retains that response and pbr: null explicitly clears it. Unavailable glass recipes refuse through either selector. Other custom labels with an explicit color retain legacy scalar behavior. Neither appearance nor color (or color: null): clear, so the face follows its body, the body its component, the component its material",
),
CommandSpec::new("appearance.chain", "Appearance Chain", appearance_chain::chain).icon("inspect").noundo().params(
"target: {body: name} | {body: name, face: zero-based model.faces index} | {component: name or id}. Returns steps [{step: face|body|component|material, look: {name,color,opacity,pbr?} or null}] in precedence order and active (step or null). Component material is the common default look of its directly owned bodies, null if mixed/empty. Imported paint is a display fallback outside the four steps. Read-only; no dialogs",
),
CommandSpec::new("appearance.replace", "Replace Appearance", appearance_chain::replace).icon("appearance").params(
"from: library name | saved look {name,color,opacity,pbr?} (copy appearance.list in_design); to: library name | assignment look {appearance? | color, name?, opacity?, pbr?} (appearance.assign rules; no clear). Matches the full look including name and PBR. scope?: {bodies?: [names], components?: [names or ids]}, at most 10000 targets; body scope includes face overrides, component scope selects only the component override. Omitted scope means all overrides, including hidden/suppressed ones; physical defaults are unchanged. Duplicate targets count once. Returns count of rewritten overrides; zero adds no history. One undo step, atomic; no dialogs. Designs above 100000 overrides refuse",
),
CommandSpec::new("appearance.library", "Appearance Library", appearance_library).icon("library")
.noundo()
.params("→ 20 legacy scalar appearances, six opaque PBR finishes and 40 starter recipes with IDs, categories, provenance, requirements and availability; six starter glass recipes are unavailable"),
CommandSpec::new("appearance.list", "List Appearances", appearance_list).icon("list")
.noundo()
.params("body?: name → assigned appearances; with body, its resolved look and its faces' (face index, look)"),
CommandSpec::new("material.list", "List Materials", material_list).icon("list")
.noundo()
.doc_only()
.params("→ built-in and design-owned materials (user: true, look, optional physical_card/physical_validation/density_comparison). Read-only; candidate engineering records do not certify sources or supply a solver"),
CommandSpec::new("engine.commands", "List Commands", commands).icon("list").noundo(),
CommandSpec::new("engine.describe", "Describe Command", crate::checked!("engine.describe", describe))
.icon("list")
.noundo()
.doc_only()
.contract(&DESCRIBE_CONTRACT)
.output(crate::schema::output_schema_for::)
.params("command: a command id. Returns {id, label, params, input, output} (and param_warnings in the warn parameter-check mode): the command's parameter documentation and, once the command has a typed contract, the JSON Schemas (2020-12) of its parameters and of a successful result (null otherwise). Read-only."),
];
/// Does `body` enclose a volume? A B-rep body does when every shell is closed and consistently
/// oriented (not a surface body), a mesh body when every triangle side is shared by exactly two
/// triangles. Only that is asked: other findings of a full validity check (faces that don't
/// mesh, tolerance gaps of an imported solid) don't take a closed body's volume away, and the
/// check stays cheap for designs with many bodies.
pub(crate) fn encloses_volume(body: &solidcraft_kernel::Body) -> bool {
if body.is_mesh() { body.is_closed_mesh() } else { !body.is_surface() }
}
pub fn measure_json(b: &solidcraft_doc::ModelBody) -> Value {
match b.measure() {
Ok(m) => {
let closed = encloses_volume(&b.body);
json!({
"name": b.name,
"closed": closed,
"volume_mm3": closed.then_some(m.volume),
"area_mm2": m.area,
"center_of_mass": closed.then_some(m.centroid),
"bbox": {"min": m.bbox.min, "max": m.bbox.max},
"faces": m.merged.faces,
"edges": m.merged.edges,
"vertices": m.merged.vertices,
"face_types": m.merged.face_types,
"kernel": {"faces": m.faces, "edges": m.edges, "vertices": m.vertices, "shells": m.shells},
})
}
Err(e) => json!({"name": b.name, "error": e.to_string()}),
}
}
fn measure(s: &mut Session, p: &Value) -> Result {
if let Some(items) = p.get("items") {
return super::measure_sel::measure_items(s, items);
}
let want = string_list(p, "bodies");
let st = s.world_state();
let selected: Vec<_> = st.bodies.iter().filter(|b| want.is_empty() || want.contains(&b.name)).collect();
// Each body is measured on its own: on all cores, in body order.
let mut bodies: Vec = solidcraft_kernel::map_on_threads(&selected, 16, |b| measure_json(b))
.into_iter()
.zip(&selected)
.map(|(m, b)| m.unwrap_or_else(|| json!({"name": b.name, "error": "measuring this body failed"})))
.collect();
// Mass from each body's material.
for (b, body) in bodies.iter_mut().zip(selected) {
let source = body.definition_name();
// Every body's material, measured or not: naming it takes no measuring.
b["material"] = json!(s.doc.body_material(source));
if let Some(v) = b["volume_mm3"].as_f64() {
let rho = s.doc.density(source);
b["density_g_cm3"] = json!(rho);
b["mass_g"] = json!(v * rho / 1000.0);
}
}
if !want.is_empty() && bodies.len() != want.len() {
return Err(bad("inspect.measure", "unknown body name"));
}
// Sheet metal keeps the edges where bends meet flat faces (so bends stay visible): count its
// B-rep faces as they are, without merging coplanar neighbours.
let sheets = s.model.state().sheets.clone();
for b in &mut bodies {
if let Some(sh) = sheets.iter().find(|x| b["name"].as_str() == Some(x.body.as_str())) {
let (df, de, dv) = sh.round_hole_correction();
for (k, d) in [("faces", df), ("edges", de), ("vertices", dv)] {
b[k] = json!(b["kernel"][k].as_i64().unwrap_or(0) + d);
}
b["sheet_metal"] = json!(true);
// A perforation field (#732) is not cut into the B-rep: take its open area out of the volume, the mass
// and the area (both faces minus the holes, plus the bores).
let open = sh.perforated_area();
if open > 0.0 {
if let Some(v) = b["volume_mm3"].as_f64() {
let nv = v - open * sh.t;
if let Some(m) = b["mass_g"].as_f64().filter(|_| v > 0.0) {
b["mass_g"] = json!(m * nv / v);
}
b["volume_mm3"] = json!(nv);
}
let bores: f64 = sh
.perforations
.iter()
.map(|p| sh.perforation_holes(p).map_or(0.0, |h| h.len() as f64) * std::f64::consts::PI * p.diameter * sh.t)
.sum();
b["area_mm2"] = json!(b["area_mm2"].as_f64().unwrap_or(0.0) - 2.0 * open + bores);
}
}
}
let skipped = bodies.iter().filter(|b| b["closed"] == false).count();
let tv: f64 = bodies.iter().filter_map(|b| b["volume_mm3"].as_f64()).sum();
let ta: f64 = bodies.iter().filter_map(|b| b["area_mm2"].as_f64()).sum();
let tf: u64 = bodies.iter().filter_map(|b| b["faces"].as_u64()).sum();
let te: u64 = bodies.iter().filter_map(|b| b["edges"].as_u64()).sum();
let tvx: u64 = bodies.iter().filter_map(|b| b["vertices"].as_u64()).sum();
let tm: f64 = bodies.iter().filter_map(|b| b["mass_g"].as_f64()).sum();
Ok(
json!({"body_count": bodies.len(), "bodies": bodies, "total": {"open_bodies_skipped": skipped, "volume_mm3": tv, "area_mm2": ta, "mass_g": tm, "faces": tf, "edges": te, "vertices": tvx}}),
)
}
fn sketch_json(s: &Session, id: u64) -> Option {
let state = s.model.state();
let ss = state.sketch(id)?;
// Where the sketch is in the world (its component's placement).
let world = s.world_state();
let plane = world.sketch(id).map(|w| w.plane).unwrap_or(ss.plane);
let sk = &ss.sketch;
let curves: Vec = sk
.curves
.iter()
.enumerate()
.map(|(i, c)| {
let det = ss.report.curve_determined.get(i).copied().unwrap_or(false);
let pid = |k: usize| sk.points.get(k).map(|p| p.id.clone()).unwrap_or_default();
let mut v = match c.kind {
CurveKind::Line { a, b } => json!({"id": c.id, "type": "line", "start": pid(a), "end": pid(b), "start_at": sk.point(a), "end_at": sk.point(b), "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
CurveKind::Circle { c: cc, r } => json!({"id": c.id, "type": "circle", "center": pid(cc), "center_at": sk.point(cc), "radius": r, "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
CurveKind::Arc { c: cc, a, b } => json!({"id": c.id, "type": "arc", "center": pid(cc), "start": pid(a), "end": pid(b), "center_at": sk.point(cc), "start_at": sk.point(a), "end_at": sk.point(b), "radius": sk.radius(i), "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
CurveKind::Ellipse { c: cc, m, r } => json!({"id": c.id, "type": "ellipse", "center": pid(cc), "major": pid(m), "center_at": sk.point(cc), "major_at": sk.point(m), "minor_radius": r, "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
CurveKind::Spline { ref pts, control, degree, periodic } => json!({"id": c.id, "type": "spline", "points": pts.iter().map(|q| pid(*q)).collect::>(), "points_at": pts.iter().map(|q| sk.point(*q)).collect::>(), "control": control, "degree": degree, "periodic": periodic, "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
CurveKind::Conic { a, b, apex, rho } => json!({"id": c.id, "type": "conic", "start": pid(a), "end": pid(b), "apex": pid(apex), "start_at": sk.point(a), "end_at": sk.point(b), "apex_at": sk.point(apex), "rho": rho, "construction": c.construction, "fixed": sk.curve_locked(i), "fully_constrained": det}),
};
if let (Some(l), Some(o)) = (&c.link, v.as_object_mut()) {
o.insert("link".into(), json!(l));
}
v
})
.collect();
let locked = sk.locked_points();
let points: Vec = sk
.points
.iter()
.enumerate()
.map(|(i, p)| json!({"id": p.id, "at": p.pos, "world": plane.to_world(p.pos), "fixed": locked.get(i).copied().unwrap_or(false), "link": p.link, "fully_constrained": ss.report.point_determined.get(i).copied().unwrap_or(false)}))
.collect();
let constraints: Vec = sk
.constraints
.iter()
.map(|c| {
let mut v = serde_json::to_value(&c.kind).unwrap_or_default();
if let Some(o) = v.as_object_mut() {
o.insert("id".into(), json!(c.id));
o.insert("name".into(), json!(c.kind.name()));
if let Some(p) = &c.param {
o.insert("param".into(), json!(p));
o.insert("expression".into(), json!(s.doc.param(p).map(|x| x.expr.clone())));
}
}
v
})
.collect();
let profiles: Vec = ss
.profiles
.iter()
.enumerate()
.map(|(i, p)| json!({"index": i, "area_mm2": p.area, "centroid_sketch": p.centroid, "curves": p.outer_curves, "holes": p.hole_curves}))
.collect();
Some(json!({
"id": id,
"name": ss.name,
"plane": ss.plane,
"status": ss.report.status,
"dof": ss.report.dof,
"fully_constrained": ss.report.fully_constrained(),
"failing": ss.report.failing,
"curves": curves,
"points": points,
"constraints": constraints,
"profiles": profiles,
"links": sk.links,
"wires": sk.wires.iter().map(|w| json!({"id": w.id, "points": w.pts.len(), "start": w.pts.first(), "end": w.pts.last(), "link": w.link, "arc": w.arc.map(|a| json!({"center": a.center, "radius": a.radius, "start": a.start, "end": a.end, "sweep_deg": solidcraft_sketch::arc_sweep(&a).to_degrees()}))})).collect::>(),
"visible": crate::view::sketch_shown(s, id),
}))
}
fn sketch_inspect(s: &mut Session, p: &Value) -> Result {
let id = match p.get("sketch") {
Some(Value::Number(n)) => s.doc.find_feature(&n.to_string()).map(|f| f.id),
Some(Value::String(x)) => s.doc.find_feature(x).map(|f| f.id),
_ => s.active_sketch,
}
.ok_or_else(|| bad("sketch.inspect", "no such sketch (and none is active)"))?;
sketch_json(s, id).ok_or_else(|| EngineError::Other("that sketch is not evaluated (rolled back or not a sketch)".into()))
}
/// Revisions of every design of this run (#6646).
static NEXT_REVISION: AtomicU64 = AtomicU64::new(1);
/// The design as `document.revision` last saw it, which its revision names.
pub(crate) struct Followed {
/// Held weakly: a design something holds weakly is never changed in place (`Arc::make_mut`
/// moves it), and its address can't go to another design meanwhile.
doc: Weak,
visibility: crate::Visibility,
pending_moves: BTreeMap,
revision: u64,
}
/// A new design's id: one for this run, then a number, so no two designs of one run, or of two
/// runs, have the same.
pub(crate) fn new_document_id() -> String {
static RUN: OnceLock = OnceLock::new();
static NEXT: AtomicU64 = AtomicU64::new(1);
let run = RUN.get_or_init(|| {
let started = web_time::SystemTime::now().duration_since(web_time::UNIX_EPOCH).map_or(0, |d| d.as_nanos());
// Hashed with this process's random keys (where the system has them), so two runs differ
// even with the clock set back.
RandomState::new().hash_one(started)
});
format!("{run:016x}-{}", NEXT.fetch_add(1, Ordering::Relaxed))
}
impl Session {
/// The revision of what the design holds now (`document.revision`), a new one when it changed
/// since last asked. Changes between two asks that end where they began (an edit undone) need
/// no new one: the design is the one that revision named.
pub fn design_revision(&mut self) -> u64 {
let seen = |f: &Followed| {
std::ptr::eq(f.doc.as_ptr(), Arc::as_ptr(&self.doc)) && f.visibility == self.visibility && f.pending_moves == self.pending_moves
};
match self.followed.as_ref().filter(|f| seen(f)) {
Some(f) => f.revision,
None => {
let revision = NEXT_REVISION.fetch_add(1, Ordering::Relaxed);
let (doc, visibility, pending_moves) = (Arc::downgrade(&self.doc), self.visibility.clone(), self.pending_moves.clone());
self.followed = Some(Followed { doc, visibility, pending_moves, revision });
revision
}
}
}
}
/// `document.revision`: the design's id and [`Session::design_revision`].
fn revision(s: &mut Session, _p: &Value) -> Result {
let revision = s.design_revision();
Ok(json!({"document_id": s.document_id, "revision": revision}))
}
fn inspect(s: &mut Session, p: &Value) -> Result {
let st = s.model.state();
let (vals, perr) = s.doc.param_values();
let params: Vec = s
.doc
.params
.iter()
.map(|p| json!({"name": p.name, "expression": p.expr, "unit": p.unit, "value": vals.get(&p.name).map(|v| v.v), "model": p.model, "comment": p.comment, "error": perr.get(&p.name)}))
.collect();
let marker = s.doc.marker.unwrap_or(s.doc.features.len());
let timeline: Vec = s
.doc
.features
.iter()
.enumerate()
.map(|(i, f)| {
let r = s.model.result(f.id);
json!({
"id": f.id, "name": f.name, "type": f.kind.type_name(), "suppressed": f.suppressed, "rolled_back": i >= marker,
"error": r.and_then(|r| r.error.clone()), "warning": r.and_then(|r| r.warning.clone()), "ms": r.map(|r| r.ms),
"boolean_diagnostics": r.map(|r| &r.boolean_diagnostics),
})
})
.collect();
let with_measure = bool_(p, "measure").unwrap_or(false);
// Each body is measured on its own: on all cores, in body order (as `inspect.measure`).
let mut measured = if with_measure { solidcraft_kernel::map_on_threads(&st.bodies, 16, measure_json) } else { Vec::new() }.into_iter();
let bodies: Vec = st
.bodies
.iter()
.map(|b| {
let mut v = match measured.next() {
Some(m) => m.unwrap_or_else(|| json!({"name": b.name, "error": "measuring this body failed"})),
None => json!({"name": b.name, "feature": b.feature}),
};
if let Some(o) = v.as_object_mut() {
o.insert("visible".into(), json!(s.body_visible(&b.name)));
if s.body_removed_later(&b.name) {
// Editing a sketch rolls the timeline back; this body is deleted further on.
o.insert("removed_later".into(), json!(true));
}
}
v
})
.collect();
let sketches: Vec = st
.sketches
.iter()
.map(|ss| json!({"id": ss.feature, "name": ss.name, "dof": ss.report.dof, "status": ss.report.status, "curves": ss.sketch.curves.len(), "profiles": ss.profiles.len(), "visible": crate::view::sketch_shown(s, ss.feature)}))
.collect();
Ok(json!({
"name": s.doc.name, "units": s.doc.units, "metadata": s.doc.metadata, "path": s.path, "dirty": s.is_dirty(), "revision": s.revision,
"active_sketch": s.active_sketch, "marker": marker,
"params": params, "timeline": timeline, "bodies": bodies, "sketches": sketches,
"selection": s.selection, "undo": s.undo.len(), "redo": s.redo.len(), "hidden_origin": s.visibility.hidden_origin,
}))
}
fn body_of<'a>(st: &'a solidcraft_doc::ModelState, p: &Value, cmd: &str) -> Result<&'a solidcraft_doc::ModelBody> {
let n = str_(p, "body").ok_or_else(|| bad(cmd, "`body` is required"))?;
st.body(n).ok_or_else(|| bad(cmd, format!("no body `{n}`")))
}
fn model_edges(s: &mut Session, p: &Value) -> Result {
let st = s.world_state();
let b = body_of(&st, p, "model.edges")?;
let tol = (b.body.size() * 2e-3).max(1e-3);
let names = solidcraft_doc::naming::edge_names(b);
let edges: Vec = b
.body
.edges(tol)?
.iter()
.map(|e| json!({"index": e.index, "name": names.get(e.index), "mid": e.mid, "length": e.length, "start": e.points.first(), "end": e.points.last()}))
.collect();
Ok(json!({"body": b.name, "edges": edges}))
}
fn model_faces(s: &mut Session, p: &Value) -> Result {
let st = s.world_state();
let b = body_of(&st, p, "model.faces")?;
let names = solidcraft_doc::naming::face_names(b);
let tol = (b.body.size() * 2e-3).max(1e-3);
let spots = solidcraft_doc::naming::face_spots(b);
// A folded sheet's faces also have the readable names its sheet gives them, worked out in
// the body's own coordinates.
let model = s.model.state();
let sheet_names = model.body(&b.name).map(|own| solidcraft_doc::sheet::body_sheet_face_names(&model, own)).unwrap_or_default();
let faces: Vec = b
.body
.faces(tol)?
.iter()
.map(|f| {
let spot = spots.get(f.index).copied().flatten();
let mut v = json!({"index": f.index, "name": names.get(f.index), "exact": solidcraft_doc::naming::face_name_exact(b, f.index),
"area": f.area, "centroid": f.centroid, "plane_normal": f.plane_normal, "point": spot.map(|x| x.point)});
if let (Some(Some(name)), Some(o)) = (sheet_names.get(f.index), v.as_object_mut()) {
o.insert("sheet_face".into(), json!(name));
}
if let (Some(solidcraft_kernel::FaceSurface::Cylinder { origin, axis, radius }), Some(o)) =
(spot.and_then(|x| x.surface), v.as_object_mut())
{
o.insert("cylinder".into(), json!({"origin": origin, "axis": axis, "radius": radius}));
}
v
})
.collect();
Ok(json!({"body": b.name, "faces": faces}))
}
const DESCRIBE_CONTRACT: crate::schema::TypedContract = crate::schema::TypedContract::new();
/// A command's prose documentation and, for converted commands, its schemas.
fn describe(_s: &mut Session, p: &Value) -> Result {
let id = p.get("command").and_then(Value::as_str).ok_or_else(|| crate::params::bad("engine.describe", "`command` must be a command id"))?;
let spec = super::find_command(id).ok_or_else(|| crate::EngineError::UnknownCommand(id.to_string()))?;
let reply = crate::schema::inspect::DescribeResult {
id: spec.id.to_string(),
label: spec.label.to_string(),
params: spec.params.to_string(),
input: spec.contract.map(|c| c.input_schema().to_value()),
output: spec.output.map(|f| f().to_value()),
param_warnings: Vec::new(),
};
serde_json::to_value(reply).map_err(|e| crate::EngineError::Other(e.to_string()))
}
fn commands(s: &mut Session, _p: &Value) -> Result {
Ok(Value::Array(crate::command_specs().iter().map(|c| serde_json::to_value(c.info(s)).unwrap_or_default()).collect()))
}
fn model_threads(s: &mut Session, _p: &Value) -> Result {
let st = s.world_state();
Ok(json!({ "threads": st.threads }))
}
fn physical_material(s: &mut Session, p: &Value) -> Result {
let cmd = "material.assign";
let bodies = string_list(p, "bodies");
let material = str_(p, "material").ok_or_else(|| bad(cmd, "`material` must be a material name"))?;
let canonical = s.doc.material_name(material).ok_or_else(|| bad(cmd, format!("unknown material `{material}` (see material.list)")))?;
let st = s.model.state();
if bodies.is_empty() || bodies.iter().any(|b| st.body(b).is_none()) {
return Err(bad(cmd, "`bodies` must list existing bodies"));
}
for b in &bodies {
if canonical == solidcraft_doc::DEFAULT_MATERIAL {
s.doc_mut().materials.remove(b);
} else {
s.doc_mut().materials.insert(b.clone(), canonical.clone());
}
}
Ok(json!({"bodies": bodies, "material": canonical}))
}
/// A colour parameter: `"#rrggbb"` or `[r, g, b]` (0–255).
pub(super) fn color_param(v: &Value) -> Option<[u8; 3]> {
if let Some(t) = v.as_str() {
let h = t.trim().trim_start_matches('#');
if h.len() != 6 || !h.is_ascii() {
return None;
}
let byte = |i: usize| h.get(i..i + 2).and_then(|x| u8::from_str_radix(x, 16).ok());
return Some([byte(0)?, byte(2)?, byte(4)?]);
}
let a = v.as_array().filter(|a| a.len() == 3)?;
let c = |i: usize| a.get(i).and_then(Value::as_f64).filter(|x| x.is_finite() && (0.0..=255.0).contains(x)).map(|x| x.round() as u8);
Some([c(0)?, c(1)?, c(2)?])
}
pub(super) fn appearance(s: &mut Session, p: &Value) -> Result {
use solidcraft_doc::appearance::FaceLook;
let cmd = "appearance.assign";
let look = appearance_look(cmd, p)?;
let bodies = string_list(p, "bodies");
let st = s.model.state();
if bodies.iter().any(|b| st.body(b).is_none()) {
return Err(bad(cmd, "`bodies` must list existing bodies"));
}
// Faces: a point on each, on the named body or the nearest one.
let mut faces: Vec<(String, solidcraft_geom::Vec3)> = Vec::new();
if let Some(list) = p.get("faces") {
let list = list.as_array().filter(|a| a.len() <= 10_000).ok_or_else(|| bad(cmd, "`faces` must list points [x, y, z]"))?;
for v in list {
let pt = crate::params::vec3(v)
.or_else(|| v.get("point").and_then(crate::params::vec3))
.ok_or_else(|| bad(cmd, "`faces` must list points [x, y, z]"))?;
let on = |b: &solidcraft_doc::ModelBody| solidcraft_doc::appearance::face_index_at(b, pt).is_some();
let body = match v.get("body").and_then(Value::as_str).or_else(|| str_(p, "body")) {
Some(n) => st.body(n).filter(|b| on(b)).map(|b| b.name.clone()),
None => st.bodies.iter().filter(|b| on(b)).min_by(|a, b| dist_to(a, pt).total_cmp(&dist_to(b, pt))).map(|b| b.name.clone()),
};
faces.push((body.ok_or_else(|| bad(cmd, format!("no face at {pt:?}")))?, pt));
}
}
let mut comps: Vec = Vec::new();
for c in string_list(p, "components") {
let id = s
.doc
.find_component(&c)
.or_else(|| s.doc.occurrences.iter().find(|o| o.name == c).map(|o| o.component))
.filter(|id| *id != 0)
.ok_or_else(|| bad(cmd, format!("no component `{c}`")))?;
comps.push(id);
}
if bodies.is_empty() && faces.is_empty() && comps.is_empty() {
return Err(bad(cmd, "give `bodies`, `faces` or `components`"));
}
// Persistent names of the picked faces.
let st_names: Vec<(String, solidcraft_geom::Vec3, Option)> = faces
.iter()
.map(|(b, pt)| {
let n = st.body(b).and_then(|mb| {
solidcraft_doc::appearance::face_index_at(mb, *pt).and_then(|i| solidcraft_doc::naming::face_names(mb).get(i).cloned())
});
(b.clone(), *pt, n)
})
.collect();
let a = &mut s.doc_mut().appearances;
for b in &bodies {
match &look {
Some(l) => a.bodies.insert(b.clone(), l.clone()),
None => a.bodies.remove(b),
};
}
for (body, pt) in &faces {
// One entry per face: a new one replaces any at the same spot.
a.faces.retain(|f| !(f.body == *body && f.point.dist(*pt) < 1e-9));
if let Some(l) = &look {
if a.faces.len() >= 100_000 {
return Err(bad(cmd, "too many face appearances"));
}
let name = st_names.iter().find(|(b, p, _)| b == body && p.dist(*pt) < 1e-12).and_then(|(_, _, n)| n.clone());
a.faces.push(FaceLook { body: body.clone(), point: *pt, look: l.clone(), name, strict_name: false, certificate: None });
}
}
for c in &comps {
match &look {
Some(l) => a.components.insert(*c, l.clone()),
None => a.components.remove(c),
};
}
// Clearing a face: drop every entry on that face, not just at the same point.
if look.is_none() && !faces.is_empty() {
let st = s.model.state();
let doc = s.doc_mut();
let picked: Vec<(String, Option, Option)> = faces
.iter()
.map(|(b, pt)| {
(
b.clone(),
st.body(b).and_then(|mb| solidcraft_doc::appearance::face_index_at(mb, *pt)),
st_names.iter().find(|(name, p, _)| name == b && p.dist(*pt) < 1e-12).and_then(|(_, _, name)| name.clone()),
)
})
.collect();
doc.appearances.faces.retain(|f| {
let idx = st.body(&f.body).and_then(|mb| solidcraft_doc::appearance::face_index_at(mb, f.point));
!picked.iter().any(|(b, i, name)| {
*b == f.body
&& (f
.name
.as_ref()
.zip(name.as_ref())
.is_some_and(|(a, b)| solidcraft_doc::naming::strip_piece(a) == solidcraft_doc::naming::strip_piece(b))
|| (!f.strict_name && i.is_some() && *i == idx))
})
});
}
Ok(json!({
"bodies": bodies,
"faces": faces.iter().map(|(b, p)| json!({"body": b, "point": p})).collect::>(),
"components": comps,
"appearance": look.as_ref().map(look_json),
}))
}
/// Shared look parser for assignment and atomic replacement.
pub(super) fn appearance_look(cmd: &str, p: &Value) -> Result