{ "sources": [ "tangency-labs/solidcraft#2193", "tangency-labs/solidcraft#2263", "tangency-labs/solidcraft#4153" ], "what": "a modelled M33x3.5 thread, a size the thread menu lacked (designation typed by hand), on a 33 mm shaft (4 turns)", "source": "analytic", "method": "ISO 68-1 basic profile: H = P sqrt3/2, basic depth 5H/8. External groove (the space between teeth): a trapezoid P/4 wide at the root radius d/2 - 5H/8, widening by 2 tan30 per unit of radius to 7P/8 at d/2. Internal groove: P/8 wide at the major radius d/2, widening to 3P/4 at the minor radius, cut only where there is material (r >= hole radius). Pappus: volume per turn = 2 pi A rc (A the trapezoid area, rc its centroid radius from the axis); a helical sweep of L/P turns removes exactly (L/P) x that, where each end of the thread is a free end or lies inside material. Shaft R=16.5 L=14, M33x3.5 (P=3.5) over its whole length, both ends free: V = pi R^2 L - (L/P) V_turn = 11974.1804 - 4 x 368.57682 = 10499.8731 mm3. COM on the axis at L/2 (7): the groove is symmetric over whole turns. Tolerance 1%: a modelled thread is a faceted helical solid (radial chord error up to 1% of the pitch on every wall, i.e. a volume deficit of about 4/3 x sag/R).", "outcome": "solid", "body_count": 1, "volume_mm3": 10499.8731, "center_of_mass": [ 0, 0, 7.0 ], "bbox": { "min": [ -16.5, -16.5, 0 ], "max": [ 16.5, 16.5, 14 ] }, "tolerance": { "rel": 0.01 } }