[ { "source": "tangency-labs/solidcraft#3404", "why": "needs a user's design (plate with a tab profile) that can't be rebuilt: the report names only the failing join extrude" }, { "source": "tangency-labs/solidcraft#3405", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3406", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" }, { "source": "tangency-labs/solidcraft#3411", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of three bodies, 'Union: no result')" }, { "source": "tangency-labs/solidcraft#3426", "why": "UI only: the extrude preview's initial direction on a picked face, no wrong geometry" }, { "source": "tangency-labs/solidcraft#3427", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3428", "why": "other area: crashes (kernel panic in a cut with an imported STEP bolt; the STEP file is from a parts library and can't be rebuilt)" }, { "source": "tangency-labs/solidcraft#3448", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude of two profiles, 'Union: no result', cylinders)" }, { "source": "tangency-labs/solidcraft#3479", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (rectangular pattern of a chamfer and an extrude: 'no edge near ...')" }, { "source": "tangency-labs/solidcraft#3496", "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')" }, { "source": "tangency-labs/solidcraft#3498", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" }, { "source": "tangency-labs/solidcraft#3514", "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)" }, { "source": "tangency-labs/solidcraft#3518", "why": "needs a user's design that can't be rebuilt synthetically: a plane split (XZ) of one body of a 41-body design, no geometry given; plain plane splits are covered by case 13" }, { "source": "tangency-labs/solidcraft#3531", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3539", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (thin extrude of a curve, join)" }, { "source": "tangency-labs/solidcraft#3547", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (cut through an extruded spline)" }, { "source": "tangency-labs/solidcraft#3563", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3578", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of a revolve with a chamfered box: the description is too vague to rebuild)" }, { "source": "tangency-labs/solidcraft#3586", "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)" }, { "source": "tangency-labs/solidcraft#3598", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (a fake edge left after an extrude chain on a chamfer)" }, { "source": "tangency-labs/solidcraft#3602", "why": "needs a user's design that can't be rebuilt synthetically: a split by a sketch line (l8 of sketch 9) of one body, the body is not given; plain splits are covered by case 13" }, { "source": "tangency-labs/solidcraft#3607", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3608", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (circular pattern of an extrude feature, cut 'no result')" }, { "source": "tangency-labs/solidcraft#3632", "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" }, { "source": "tangency-labs/solidcraft#3634", "why": "UI only: hole tool auto-switching to multi-hole mode" }, { "source": "tangency-labs/solidcraft#3645", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3648", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3649", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude refusing for zero-thickness edge contact; the contact is not described, see #3841 for the circular-edge case)" }, { "source": "tangency-labs/solidcraft#3656", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3657", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3667", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3680", "why": "other area: sheet metal (a hole in sheet-metal material is refused)" }, { "source": "tangency-labs/solidcraft#3707", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3709", "why": "no geometry: a video of cutting a bolt in another CAD tool, no model or command" }, { "source": "tangency-labs/solidcraft#3725", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3727", "why": "UI only: sketch.pattern.circular was run with no sketch being edited" }, { "source": "tangency-labs/solidcraft#3732", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (French report: Combine cut keeping the tool gives nothing, parts are named Equerre and Rallonge2)" }, { "source": "tangency-labs/solidcraft#3734", "why": "not geometry: the failing step is a profile that is not closed in the user's sketch" }, { "source": "tangency-labs/solidcraft#3753", "why": "other area: fillets (a chamfer inside a circular pattern is too large for the edge, 'grow the part'; the pattern itself is not at fault)" }, { "source": "tangency-labs/solidcraft#3757", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" }, { "source": "tangency-labs/solidcraft#3767", "why": "not geometry: a face lineage refusal ('no supported stable semantic lineage') on a user's body" }, { "source": "tangency-labs/solidcraft#3777", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3785", "why": "not geometry: feature request (pattern along a closed path around a rounded rectangle)" }, { "source": "tangency-labs/solidcraft#3787", "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')" }, { "source": "tangency-labs/solidcraft#3789", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3791", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3793", "why": "no geometry: a screenshot only, the report gives no command or model" }, { "source": "tangency-labs/solidcraft#3803", "why": "other area: UI only (pattern of a sketch feature is not offered: 'Sketch2 cannot be patterned')" }, { "source": "tangency-labs/solidcraft#3808", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)" }, { "source": "tangency-labs/solidcraft#3811", "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})" }, { "source": "tangency-labs/solidcraft#3823", "why": "not geometry: an expression error (`e` is not a parameter)" }, { "source": "tangency-labs/solidcraft#3824", "why": "other area: threads (a threaded hole needs a cylindrical face: 'no cylindrical face there to thread')" }, { "source": "tangency-labs/solidcraft#3843", "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})" }, { "source": "tangency-labs/solidcraft#3844", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (holes of an extrude cut, `flange_thickenss` parameter, not visible in the final result)" }, { "source": "tangency-labs/solidcraft#3865", "why": "UI only: shift-click multiple selection in the Combine dialog" }, { "source": "tangency-labs/solidcraft#3866", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" }, { "source": "tangency-labs/solidcraft#3869", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)" }, { "source": "tangency-labs/solidcraft#3879", "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)" }, { "source": "tangency-labs/solidcraft#3904", "why": "UI only: selecting several non-coplanar profiles in Extrude (which profiles the dialog accepts), no wrong geometry" }, { "source": "tangency-labs/solidcraft#3926", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut from a face of a user's body)" }, { "source": "tangency-labs/solidcraft#3932", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3948", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#3961", "why": "UI only: should hidden bodies be left out of a cut: a visibility policy, the cut itself is right" }, { "source": "tangency-labs/solidcraft#3975", "why": "not geometry: feature request (rework of the hole tool's positioning)" }, { "source": "tangency-labs/solidcraft#3978", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#4017", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#4036", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#4041", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut 'up to' another body: 'nothing lies between the profile and the To object')" }, { "source": "tangency-labs/solidcraft#4042", "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" }, { "source": "tangency-labs/solidcraft#4070", "why": "not geometry: hole not created, the report gives only the sketch point id" }, { "source": "tangency-labs/solidcraft#4075", "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry" }, { "source": "tangency-labs/solidcraft#4077", "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry" }, { "source": "tangency-labs/solidcraft#4098", "why": "not geometry: documentation of the taper sign (a positive taper makes the walls lean outward); the behaviour is not wrong" }, { "source": "tangency-labs/solidcraft#4111", "why": "UI only: Press/Pull opens Extrude on a selection with no planar face or profile" }, { "source": "tangency-labs/solidcraft#4124", "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)" } ]