[ { "source": "tangency-labs/solidcraft#24", "why": "not geometry: a diagnostics/warning feature (report which boolean fallback ran and by how much), no wrong result" }, { "source": "tangency-labs/solidcraft#141", "why": "needs the basin design (a floor of four 0.5 degree facets around a drain with a boss ring, from #119/#126); not attached, no recipe in the issue" }, { "source": "tangency-labs/solidcraft#206", "why": "no design attached (a 146-curved-face target); only the join's params and the failure text" }, { "source": "tangency-labs/solidcraft#367", "why": "needs the example plastic enclosure (not attached); only the drilled-hole params and the failure text" }, { "source": "tangency-labs/solidcraft#456", "why": "no design attached (cut with a freeform tool from a sketch 'to' a point); only the params and failure text" }, { "source": "tangency-labs/solidcraft#458", "why": "no design attached: a cut from a sketch that projects the body's top edges; the steps in the report are not enough to rebuild it" }, { "source": "tangency-labs/solidcraft#522", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#586", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#608", "why": "no design attached: a second cut onto a face with an existing cut leaving a tiny edge; only the extrude cut's parameters" }, { "source": "tangency-labs/solidcraft#632", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#746", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#823", "why": "other area: import (an imported STEP body: 'lumps: nested shells do not alternate material and void'); the file is not attached" }, { "source": "tangency-labs/solidcraft#858", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#864", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#873", "why": "the hexagon positions 'next to' the screw are not given, so the touching contact cannot be rebuilt faithfully; the report has only the join's params" }, { "source": "tangency-labs/solidcraft#887", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#938", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#953", "why": "no design attached: a cup with a square on its inside floor; the square's size and position are not given" }, { "source": "tangency-labs/solidcraft#967", "why": "tracking issue for the Hole tool audit; its open refusals (slanted faces, #559) are covered by the case 559-through-hole-into-shelled-box-rim and the hole matrix; the rest is UI" }, { "source": "tangency-labs/solidcraft#990", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#999", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1002", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1025", "why": "private design not attached (join of 23 cone/cylinder tools); no recipe" }, { "source": "tangency-labs/solidcraft#1125", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1126", "why": "no design attached: a Draft of a face with non-perpendicular neighbours about a custom neutral plane; only the Draft parameters" }, { "source": "tangency-labs/solidcraft#1133", "why": "no design attached (a text sketch extruded from another object, tool with 21 freeform faces)" }, { "source": "tangency-labs/solidcraft#1137", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1216", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1225", "why": "needs the user's design (extrudecrash.txt attachment): tapered extrude of tangent circles on an existing body; steps not reproducible from the text" }, { "source": "tangency-labs/solidcraft#1253", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1343", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1409", "why": "feature request: Emboss on non-planar ('complex') faces; the current refusal is documented, and no geometry or design is given" }, { "source": "tangency-labs/solidcraft#1436", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1440", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1441", "why": "no design attached and the report text is empty beyond the feature's parameters" }, { "source": "tangency-labs/solidcraft#1451", "why": "other area: import (a STEP model from a public site, not attached; join of a 1 mm extrusion refused)" }, { "source": "tangency-labs/solidcraft#1467", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1471", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1511", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1552", "why": "feature request: sketch entities as Split Body tools; not a wrong result" }, { "source": "tangency-labs/solidcraft#1662", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1672", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1760", "why": "no design attached ('CPR Sensor' split by a construction plane: 'Intersect: no result')" }, { "source": "tangency-labs/solidcraft#1807", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1834", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1848", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1882", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1926", "why": "no design attached; a freeze in a symmetric cut, only a screenshot" }, { "source": "tangency-labs/solidcraft#1944", "why": "empty report: no parameters, no text" }, { "source": "tangency-labs/solidcraft#1946", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#1963", "why": "empty report: no parameters, no text" }, { "source": "tangency-labs/solidcraft#1964", "why": "screenshot only, no parameters or text; no recipe" }, { "source": "tangency-labs/solidcraft#1965", "why": "not a geometry failure: booleans on mesh bodies are refused by design ('a boolean needs a solid body')" }, { "source": "tangency-labs/solidcraft#2048", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2059", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2073", "why": "not boolean geometry: inspect.hole_stacks (an inspection command for aligned holes), no wrong kernel result" }, { "source": "tangency-labs/solidcraft#2075", "why": "not boolean geometry: parts.fasten (assembly fasteners sized to hole stacks)" }, { "source": "tangency-labs/solidcraft#2090", "why": "not boolean geometry: inspect.clearance measuring (a shared volume against the union), a measurement feature" }, { "source": "tangency-labs/solidcraft#2156", "why": "clearance/interference measurement of a pin in its bore (inspect.clearance), not a modelling boolean; the facet crossing tolerance is not a right-answer number a recipe can state" }, { "source": "tangency-labs/solidcraft#2205", "why": "persistent face names (exact history of a prism boolean) only; the solid it gives is already right, so no geometry answer to grade" }, { "source": "tangency-labs/solidcraft#2407", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2418", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2450", "why": "other area: tessellation (Section Analysis shows a white line at the part's edge; display only)" }, { "source": "tangency-labs/solidcraft#2454", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2461", "why": "other area: sheet metal ('this machining intersects a folded bend or a nonparallel panel')" }, { "source": "tangency-labs/solidcraft#2466", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2495", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2497", "why": "not boolean geometry: assembly joint relations (parallel, angle, point on plane)" }, { "source": "tangency-labs/solidcraft#2503", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2522", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2525", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2527", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" }, { "source": "tangency-labs/solidcraft#2534", "why": "no design or file attached: the report carries only the failure text and the feature's parameters, so no synthetic geometry can be rebuilt from it" } ]