# Point clouds A point cloud is scanned points kept in the design as a reference to model from (#5151): a lidar or SLAM map, a photogrammetry result, a part from a handheld scanner. It is drawn as dots in the viewport, depth-tested with the bodies, and never becomes a body; nothing in the timeline depends on it. ## Files | Extension | What is read | |-----------|--------------| | `.ply` | ASCII, binary little-endian and binary big-endian PLY: the `vertex` element's `x`, `y`, `z` (any numeric type) and its `red`, `green`, `blue` when present (bytes, 16-bit or 0…1 floats). Every other scalar vertex property (intensity, a class, a time…) is kept, by its name in the file, to colour and filter the cloud by; it is whole-numbered when its type is an integer. The `edge` element (`vertex1`, `vertex2`) and the `face` element (`vertex_indices`, a face as a fan of triangles) become segments and triangles between the points, with their own properties. Other elements are passed over. | | `.xyz`, `.pts` | Text, a point per line: `x y z`, optionally followed by `r g b` (six numbers) or by an intensity and `r g b` (seven or more, as PTS files write it). Spaces, tabs, commas or semicolons separate the numbers; `#` and `//` start comments; a PTS file's first line (its count) is skipped. | A PLY file with faces can also be inserted as a mesh body with **Insert Mesh** (`file.insert_mesh`), which makes it solid geometry rather than a reference. Point cloud files say nothing about their length unit. `units` (`mm`, `cm`, `m`, `in`, `ft`) says what it is; the default is millimetres, as for every other import. Lidar and SLAM maps are usually in metres. The unit can be changed afterwards (Browser › Point Clouds › Edit Point Cloud, or `pointcloud.edit` with `units`): the points are scaled from the unit they came in as. ## Reloading A cloud remembers where its file was (`source`, the absolute path it was inserted from), so a file that changed can be read again: **Reload from file** in the Edit Point Cloud card, or `pointcloud.reload`. The points, colours, segments, triangles and properties are replaced; the name, placement, units, point size and colouring are kept, and so are the filters on properties the file still has. A filter on a set of named values goes when the file no longer names them. Colouring by a property the file no longer has goes back to the file's colours. The file is read under the limit the cloud was inserted with (`max_points`), so the same file reads as the very same points and a file that grew comes in whole unless it exceeds that limit, when it is thinned as an insert would thin it. The file is read beside the window, with progress and Cancel. A cloud opened from a design saved before it remembered its file cannot be reloaded. A file on another computer (`\\host\share`) is treated as a linked design's is: **Reload from file** asks before it connects to that server, and `pointcloud.reload` is refused until the server is allowed in Preferences. ## Colours **Color By** in the Edit Point Cloud card (or `color_by`) says how the points are coloured: - `file` (the default): the file's colour of each point, grey when it has none. - `single`: one colour (`color`) for every point. - `height`: a ramp by design Z, blue low through cyan, green and yellow to red high. It runs between two heights (`color_range`, mm). By default they are worked out from the points: all but the lowest and highest 2 %, so a few stray points don't flatten the ramp. - any property's name (`x`, `y`, `z` or one of the file's): the same ramp over the property's values or, for a whole-numbered property, a palette of ten colours (its value modulo ten; negative values grey). By default the ramp runs exactly over the values the property takes on the points every filter keeps, so filtering re-spreads the colours over what is left. A ramp's range is a [range track](#range-tracks) in the card; touching it sets the range and turns **Automatic Range** off, and ticking the box (or a double click beside the range) gives it back. `color_range: null` does the same from a command. A whole-numbered property may name its values with a PLY comment, `property: 0 name, 1 other name, -1 none` (for example `comment role: 0 outer wall, 1 inner wall`). Coloured by it, the card shows a legend, a swatch and a name per value; clicking a name shows or hides that value. ## Edges and faces A cloud read from a PLY file with edges or faces draws them between its points: triangles filled, segments as lines or, when they have `width` and `height` properties, as beads of that stadium cross-section (a tube when the two are equal), meeting mitred where one runs into the next. Points no segment or triangle ends on stay dots, of the cloud's point size. A point that can't be read (not a finite number, or out of range) is left out with a warning, and so are the segments and triangles that end on it. A property on the points varies along the segments and across the triangles that meet there; one on the segments or triangles is constant on each. Colours follow the same rule, and a range filter cuts an element exactly where its value crosses an end of the range, so a filter on a time property replays a path as it was drawn. A range track weighs each element by its measure, each kind over its own total: a dot counts 1, a segment its length, a triangle its area. ## Filters A filter keeps the points whose property lies in a range (both ends included) or, for a property with named values, is one of a set of values. Only what every filter keeps is shown; a cloud has at most 8 filters, and the view applies the first 4. **Filter by** in the card adds one over a property's whole span (or with all its named values); × removes it. Filters change what is drawn, never the points the design holds. ## Range tracks Each range filter, and a ramp's range, is edited on a track, as a range is in an audio editor. The track draws how much of the cloud lies at each value: a histogram of the property over what the *other* filters keep, stacked by colour, so it is also the colour legend. A thin strip above it shows the property's whole span, with the part the track shows framed. - Drag an end or the band between them to move them; drag elsewhere to draw a new range. Shift-click brings the nearer end to the pointer. - Double-click the band to fit the track to it; double-click beside it for the whole span. The wheel or a pinch zooms around the pointer, a sideways scroll pans, and dragging in the strip moves the framed part. - An end snaps to a value where the colour changes when no other change is near at this zoom; a whole-numbered property's ends snap to whole numbers. ⌥ moves ten times slower, without snapping. - Once the track is touched, ← and → bring the part touched last to the previous or next colour change (one pixel with ⌥, or where there is none). - **Start**, **End** and **Length** are fields too; Length keeps the start. A value typed with a sign is relative: `+30` moves it by 30. - **▶ Play** (or Space) moves the part touched last across the track in 20 seconds: an upper end grows the range, the band slides it, a lower end wipes it. The track follows it, and an automatic colour range follows it too. Touching the range stops it. ## Size A cloud keeps at most `max_points` points (5,000,000 unless asked, at most 20,000,000); a larger file is thinned evenly, one point in *n*, and the result says how many were kept. Thinning would cut a file's edges and faces, so a thinned file leaves them out, with a warning; raise `max_points` to keep them. A cloud holds at most 20,000,000 segments and as many triangles. Files up to 1 GiB are read. The points are stored single precision relative to the cloud's first point (kept double precision), so a scan far from the origin keeps its detail; they travel inside the design file as a binary part (12 bytes a point, 3 more with colours). ## Commands - `pointcloud.insert` — `path`; `name?`, `units?`, `max_points?`, `center?` (move the middle of its base to the origin), `point_size?` (pixels), `color_by?` (`file`, `single`, `height` or a property's name), `color?` (`[r, g, b]` 0…1; alone it means `single`, `null` means `file`), `color_range?` (`[low, high]`, or `null` for the automatic range; `height_range` is the same), `filters?` (`[{"property": …, "range": [low, high]}` or `{"property": …, "values": [whole numbers]}]`, or `null` for none). - `pointcloud.edit` — `cloud` (id or name); `name?`, `visible?`, `point_size?`, `color_by?`, `color?`, `color_range?`, `filters?`, `units?`, `matrix?` (a rigid placement, as `occurrence.move` takes it). - `pointcloud.reload` — `cloud`; reads its file again (see [Reloading](#reloading)). - `pointcloud.delete`. - `pointcloud.list` — each cloud with its `source`, its segment and triangle counts, its properties (name, whole-numbered or not, span, named values), its filters and its ramp's range as drawn (`color_range`). - `doc.open` opens a point cloud file as a new design holding it; dropping one on the window adds it to the open design. ## Example ```json {"command": "pointcloud.insert", "params": {"path": "glim-points.ply", "units": "m", "color_by": "height"}} {"command": "pointcloud.edit", "params": {"cloud": "glim-points", "color_by": "intensity", "filters": [{"property": "z", "range": [0, 2500]}]}} ```