G 1/2 external and Rp 1/2 internal (ISO 228-1 / ISO 7-1, 55 deg) by Pappus turn by turn; R 1/2
and 1/2-14 NPT external and Rc 1/2 internal tapers (1 in 16 from the standard's diameter at the
free end, crests cut by the major or minor cone) by the screw sweep's Jacobian, integrated exactly
(ladder_lib.sweep_removed); an S20x4 run down to a shoulder with its steep flank toward the end and
toward the start, which moves where the groove stops; tip: start, and a Tr20x4 chamfered at its own
30 deg and 2.5 mm; refusals for a Tr chamfer without a depth and for the square form.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
07, 08, 09, 11 and 12 passed on one valid body alone. Each now checks
its volume, bbox and (where derived) counts, area and centre of mass:
the three-section loft is the degree-2 interpolant r = 10 + (z-20)^2/40;
the square-to-circle loft a ruled prismatoid, its mixed area from the
sides ruled to rational quarter arcs; the periodic fit spline the cyclic
C2 chord-length cubic; the pleated skins star polygons on fixed rays,
their crossing integrated exactly per wedge; the cap's union integrated
as y-intervals over x and z. All hold on SMLib (worst 9e-8 relative).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Tiers: primitives; booleans in the degeneracy classes (coincident and coplanar faces, edge-on-edge,
vertex-on-face, tangent along a line and a circle, near-tangent gaps and overlaps of 1e-3 and
1e-6 mm, seam and pole crossings) and cuts that end in a single line (a knife-edge wedge, a V
groove and a cylinder that pinch the part in two, a hole tangent to a face, a notch flush with an
end); line-and-arc extrudes and revolves (partial, touching the axis); spline profiles, sweeps
and lofts; holes and tapped holes (blind, drilled, counterbore, countersink, M5-M8 taps, into a
curved face, near and tangent to an edge, crossing); modelled threads (external, fine, partial,
to a shoulder, internal, into a chamfer, at a filleted shoulder); fillets (constant, tangent
chains, convex and concave, variable down to 1e-3 and to 0 at a vertex, corners with equal and
unequal radii, g2 corners); chamfers (two distances, angle, three- and two-edge corners, curved);
shells and offsets; patterns and mirrors (overlapping instances that cut a core free); and
cumulative parts.
A running part grows one tier at a time through `base` (back wall, revolved boss and slot,
spline window, tapped holes, rounds, chamfers, shell, vents), and the last case adds its thread:
it carries every tier. Answers are analytic wherever the geometry has them (Pappus, Steinmetz,
ISO 68-1 basic thread profiles, exact Gauss quadrature of Bezier profiles, inclusion-exclusion
for chamfered corners), otherwise invariants; each `method` gives the derivation, and
tools/kernel-ladder/cases.py (standard-library Python, like tools/oracle-analytic) writes them.
Capabilities SolidCraft lacks are `missing` cases: multi-start threads, thread runout lengths,
fillet corner setbacks.
The golden is the first recording on truck, each tier sorted by its time. SMLib booleans are
not on this branch yet, so the smlib column records "not supported yet" for every case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT