A sketch attached to a face is evaluated in the face's frame. When that frame is the body's
own, the body was still rebuilt as a new ModelBody with empty mesh cells, so projecting the
face's edges display-meshed a throwaway copy and the next cut or join meshed the same body a
second time. On a body whose cut edges are slow to mesh this added about a second to each
feature after a sketch on a face. In place, the anchored body is now the model's own clone and
shares its mesh.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3223
* Extrudes from a nested STEP part's face join and cut it with the imported root active (#3223, #2872)
Opening a STEP assembly leaves its root component active, and the root
owns no body: its parts are components inside it. A profile sketched on
such a part's face was therefore treated as outside the active scope.
Join made a separate body instead of joining the part, and the automatic
operation saw no material and offered New Body in either direction; an
automatic extrude that came out as a cut found nothing to cut.
A component with no body of its own now works on the bodies of the
components inside it whose geometry lies in its own frame (as an import
places them): Join targets the body whose face the sketch is on, the
automatic operation looks at those bodies, and an extrude whose own
operation is Cut or Intersect takes part in every body as an explicit
cut already did.
* Split the schema contracts into one module per command file
`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.
No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add shared schema field types for the next conversions
For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:
- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
which `add_feature` reads for every feature, flattened into a contract
with `deserialize_with = "feature_common"`, which keeps the key in the
message and the issue's path.
The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3510
* Split Body: each piece can be renamed on its own (#3510)
A split named its new pieces after the split body every time (`Top (1)`),
so renaming a piece did nothing, and renaming the split body renamed the
other piece too (and broke the features that used it). The pieces now
take the names body.rename stores, and a rename keeps the names later
features derive from the renamed body.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3383
* Combine: tools from another component meet the target where they are shown (#3383)
Bodies are evaluated in their own component's frame and an occurrence's
placement is applied only for display. Combine passed tool bodies to the
boolean untouched, so a tool in a component placed differently from the
target's was read as if its coordinates were in the target's frame: a
join that overlapped on screen gave two separate shells, and cuts and
intersects missed the same way. Any placement difference did it, a turn
or a plain move, in either direction.
Combine now moves each tool by the inverse of the target's placement
times the tool's own, the same placement used to show the body, keeping
face lineage. A tool placed exactly like the target is left untouched,
so combines within one component give the same result as before.
Moving an occurrence now re-evaluates a combine that depends on it.
* Joins, cuts and intersects draw their tools where they are shown (#3383)
A primitive, extrude, revolve, loft, sweep, pipe or coil that joins,
cuts or intersects bodies draws its tool in its own component's frame,
but each body is kept in its own component's. A target in a component
placed differently (an occurrence moved or turned, or a body moved into
it) met the tool as if the tool's coordinates were in the target's
frame: a join that overlapped on screen gave a separate lump 100 mm
away, and cuts missed the same way.
While such a feature evaluates, the tool now goes into each body's frame
(the inverse of the body's placement times the feature's component's)
wherever the join, cut or intersect meets it, and a body joined into one
placed differently is moved into its frame. Bodies placed as the feature
is are left untouched, so results within one component are unchanged.
Features that name the bodies they change re-evaluate when an occurrence
moves.
This also settles the moved-fastener cut of #439 (Combine, earlier commit).
* Through all and an extrude's contact tests see targets where they are shown (#3383)
An extrude or revolve measured its through-all length, and tested where
its tools meet the targets (a profile on a target's face, coplanar
growth, holes over empty space, taper run-on), on the targets as stored
in their own component's frame. With the tool now moved into a target
placed differently, a through-all cut drawn from the root under a cube
in a component moved 100 mm up was cut only as far as the cube is tall
in its own frame, and missed it.
These features now see the bodies they change that are placed
differently moved into their own component's frame, the same moves the
tools are taken back through, so the length reaches the target where it
is shown. Bodies placed as the feature is are read as before.
* claim: #3353
* Sheet metal: mirrored and copied sheet bodies stay sheet metal
Mirroring a sheet metal body into a new body gave a plain solid: the
opposite-hand bracket had no flat pattern, DXF or bend table
("`Body1 (2)` is not a sheet metal body"). Copies from a body pattern or
Move with copy lost their sheet model the same way.
A copy now takes the sheet model with it (SheetBody::copied). A rigid
copy moves the flat frame. A mirror moves the frame with its x axis
turned round, so the thickness side stays, and mirrors everything in
flat coordinates (x -> -x): base, flange bend lines (run from their far
end, with their end extensions, slopes and tears swapped), panel shapes,
cut-outs, pockets, bores, letters and base sketch lines. Arcs stay exact
and loops keep their sense. A perforation field of a mirrored copy runs
its grid from the right, so its holes are the mirror image too. The flat
length, bends and K-factor are unchanged, and the copy takes further
sheet metal features of its own.
Mirror with combine is unchanged: the joined body has no single sheet
model yet. Mirroring or patterning flange features is still refused.
Sheet models are derived from the timeline, so no design format change.
* Format: note the saved from_right of a mirrored sheet's perforation field
The new `from_right` flag is saved in the design, so it gets a pending
format note. No migration: a field without it runs from the left as
before.
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040)
A face's sketch fits an edge that is no line or arc (the quarter-ellipses
where fillets meet a slanted face) as splines a hair off the body's edges,
so a join from the face touched the body along a face it did not match and
failed with "boolean Union: no result" after minutes. When the profile is
a whole planar face of the one target, the join now sweeps the body's own
face, which shares its edges and is sewn on along it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040)
A cut from a whole planar face sweeps walls from each of its edges. Where
the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall
only touches the body along that edge, or lies in the face beside it, and
the boolean failed on it with "no result". The cut now keeps the walls that
go into the body, exactly (the body's own edges), runs the outline round
the others well outside the body, and starts a little out from the face.
A cut whose walls all only touch takes a slab beyond its depth plane.
Not covered: a cutting wall tangent to the face beside a touching one (a
round's wall meeting an end face, as in the issue's part); the boolean
still fails there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: leave a whole face outlined by lines and arcs to the profile's own tool
Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Run the whole cut tool from a face under the kernel guard (#2040)
Review: `builder::vertex`, `builder::line`, `Face::try_new` and
`builder::translated` ran outside `crate::guard`; only the sweep was
guarded. `cut_tool` now runs all of it under one guard.
Adds an end-to-end test of a cut into a face the body stands out past
below it (the block's top strip between its rounds): it takes only
what lies over the face.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* test: the slab cut of whole_face_tool, on a spline prism (#2040)
A prism on a closed spline standing on a wider plate, cut 3 into its whole
top face: the slab takes the face's area times the depth and leaves the
plate alone. A test-only counter asserts the slab was the tool, so the test
cannot pass through the profile's own tool. Shortens the name of the
rounded block's top-face cut test.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.
Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426
Co-authored-by: Codex <noreply@openai.com>
* claim: #3378
* Pattern and mirror copies of a join that merged its targets join the merged body (#3378)
Since #2755 a pattern or mirror copy of a primitive reuses the seed's targets. When the
seed was a join that merged two targets, the second one no longer exists, so the copies
failed with `unknown body`. The copies now keep the seed targets that are still there;
when none is, the names stay and the error says which body is missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rerun CI: the previous run was cancelled before any check ran
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3242
* MCP batch: rollback restores the design the batch began in (#3242)
A failed batch with rollback: true reported rolled_back: true even when the
design never went back. Two defects, both fixed:
- file.new (and any document-replacing command) replaced the session with it,
taking its checkpoints down too, so a batch that failed after file.new had
nothing to restore. Session::replace_design now carries the checkpoints over
to the fresh session: the checkpoint belongs to the batch, not to the
session that happened to be holding the document.
- rolled_back echoed the requested flag. It now reports whether the design is
actually back: the app answers engine.batch with a new restored field, and
the MCP tool reports restored && rollback. An app that predates the field
falls back to undone/completed.
* Batch: answer with main's rolled_back field after the merge (#3242)
Upstream #2900 put the real restore check on engine.batch as
`rolled_back` while this branch named it `restored`; the merge kept
main's control test and this branch's field, and CI caught it.
Standardize on main's wire name: the app answers `rolled_back`, the
MCP tool reads it (fallback for older apps unchanged), docs and tests
follow. The checkpoint carry-over across file.new is unchanged.
---------
Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
* claim: #3141
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 2-tangent circle: start from the touching circle, not the click (#3141)
The tool passed its second click as the place to start solving, and a
click lies on a curve: the circle began centred on that curve, where its
tangency has no side yet. The solve then moved the user's curves to fit
(a rectangle came out skewed), or failed outright when they were fixed.
The command now starts from the centre, nearest the requested point, of
a circle of that radius touching both curves (where the curves moved by
the radius meet), and the tool asks for the circle between its two clicks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Fix recovery for unsaved background tabs (#2884)
* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)
After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)
With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2757
* fix(params): autocomplete offers a parameter for any part of its name (#2757)
Typing `side` now offers `cab_side_thickness`: parameters match the word
anywhere in their name, after those that start with it, both in the expression
boxes and in parameters.complete. Functions, constants and units still match
from the start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* perf: renaming a feature evaluates nothing (#3044)
A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)
Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A closed loop whose joints meet a few nanometres apart along their parallel
axes (faces modelled that far apart) passes the conflict check, but the loop
solver wanted 1e-7 mm before it moved anything. No value of a planar loop
takes such a gap out, so every drive of it stopped at once (stopped_by_loop,
fraction 0) and joint.reach called the loop open.
The solver now closes such a loop as far as it comes and, when what is left
is within the conflict check, keeps it that closed on the way. joint.drive,
joint.reach and the nearby pose of the dof count share it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Tessellation: trimmed faces of display meshes stay on their surfaces
Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Tessellation: one boundary rule for every mesh; drop the #1648 retry
A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Thread preview test: wait for the stale fit error to clear before the next preview
After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
On an imported part with 2.5 million triangles, every frame of a Section
Analysis drag looked up the picked face's plane several times (each lookup
tessellates the whole body, about 0.1 s) and cut every triangle again for
the outline (38 ms).
- planar_face keeps its last answers for the model state they were found in.
- The outline cuts through a SectionIndex: the mesh's triangles sorted into
slabs along the cut's normal, kept per mesh while the normal stays, so a
cut looks at one slab (0.06 ms on that part) and finds the same segments.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* inspect.interference/clearance: list mesh bodies as unchecked
Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair
was formed, so two overlapping STL imports reported count 0 and an empty
unchecked list, which reads as "no collision". Each mesh body is now
listed in `unchecked` as {a: name, b: null, reason: "mesh body: not
checked"} by both commands. inspect.clearance also stops refusing a mesh
body named in `bodies` or `against` as "no solid body"; it is listed
instead. The parameter docs and the assemblies guide say so.
Fixes#3249
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: separate the mesh-body note from the paragraph above
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3393
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)
A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3323
* Contact: a check finds bodies crossing face to face, not only a corner inside (#3323)
The collision probe sampled each tessellation's points (vertices, edge
midpoints, triangle centres) against the other body, so plates crossing
face to face - where the crossing strip is smaller than a face triangle -
put no sample point inside and went unreported while inspect.interference
found the overlap. Where an edge of one body passes through the other's
surface, the middle of the chord it cuts lies inside; its distance from
that surface is the depth. Touching and grazing are unchanged. The sweep's
collision work model pays for the added edge pass.
---------
Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
* claim: #2724
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* Sketch: an angle between two lines from one point measures the angle between them (#2724)
An angle dimension on two lines that share an end (two radii of a circle, the
two sides of a corner) took the acute reading of the lines' directions, so
radii 120° apart measured 60° and 150° apart 30°. With no text position given,
the angle is now measured from the shared end towards the lines' other ends,
the reading anyone would mean; the supplement stays the alternative reading.
Lines that share no end, and dimensions placed with a text position, are
unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
* ci: re-run the checks; the run on the last push was cancelled
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A body rename changes names only, but committing it went through the general
"design changed" path: the whole timeline was evaluated again. On an imported
assembly that means reading the STEP file again and meshing every body (about
100 s on the Prusa Core One, and the same again for undo).
When the only change from the previous design is one body rename (the
features' stored body names and the body-keyed maps the rename updates), the
model now renames the body in its results instead: every body keeps its
geometry and meshes, and the fingerprints are set to the renamed design's so
the next evaluation reuses everything. Undo and redo of the rename take the
same path. A rename the model can't follow that way (the body is changed or
named by a later feature, sheet metal, threads) still evaluates the design as
before.
`bench-open --ops script.json` times commands and their undo on an opened
design, with the view work each leaves.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: adopt the saved model on open (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: tests
* WIP: bench-open opens as Open does
* docs: opening from the saved model
* Tests: an edit after opening evaluates from the feature it changes
* clippy
* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper
* Open: no picture from the model when the model itself opens; cancel test evaluates
* Saved model: bodies passed through found without writing their record; states list runs of bodies
* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again
* Model cache size guard: the saved model's writer
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3248
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* sketch.create: reject a custom plane origin that is not three numbers
A custom plane {origin, x_dir, y_dir} whose origin was given as an
expression ("w/2") or a number with a unit ("20 mm") silently became
[0, 0, 0], while a bad x_dir or y_dir was an error. A missing origin is
still the world origin; one that is present but is not three numbers now
returns a clear error. Expressions are not evaluated, so the saved
format is unchanged.
Fixes#3248
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* joint.inspect: what each joint is attached to, for agents
A read-only `joint.inspect {joint?}` gives each joint's definition: for each
side the occurrence, its component and path, the snap as saved, and what
each persistent face/edge name refers to (the feature that made it, and the
sketch and curve a swept side came from), whether the origin resolves and
why not; plus kind, offset, angle, flip, values with limits, expressions,
the motion links it is in, and its solve errors and conflicts. Its id ends
in `.inspect`, so agent gates treat it as reading only.
MCP `inspect_design` includes the definitions when the design has joints
(`joints: false` leaves them out). joint.list and joint.inspect share the
motion-link JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* i18n: catalog entries for Inspect Joint (en, ja, zh)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`sketch.trim.path {points, dry_run?}` walks a polyline and, at each place it
crosses a curve trim may change, removes that piece exactly as `sketch.trim`
would there, in the order crossed and in one undo step. A piece already gone
is not trimmed again; projected geometry, infinite lines, offset outputs and
pieces trim refuses are passed over (reported in `skipped`). It returns each
trim's result and each removed piece as a polyline; `dry_run` reports them
without changing the design.
With Trim on, a press and drag in the viewport draws that path: the pieces it
would remove light up (a dry run of the command) and letting go runs it. A
click still trims the one piece under it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3234
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Sheet metal: refuse an edge flange on a flange's bend line (#3234)
A pick on the edge where a bend meets the plate (or the flange panel)
found a panel edge that is already a bend line and made a second flange
on it, leaving a gap and a sheet of two shells. add_flanges_each now
refuses such an edge before anything moves.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3244
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Fail an unverifiable intersection instead of keeping what it should trim (#3244)
When every route of the general boolean fails, it falls back on the sampled answer
(one body whole, or nothing) with a "not verified ... that part is ignored" warning,
even when the bodies' facets cross well past their faceting error. For an
intersection that keeps exactly the material it was asked to trim: teeth standing
0.27 mm out of a trimming cylinder came back untrimmed, and `solidcraft-cli run`
exited 0 with a part 16.918 mm in radius.
An intersection whose sampled answer is contradicted by facets crossing by more than
twice the depth the warning reports (6 x the check mesh tolerance, three times the
faceting error of two meshes) now fails, and the model is kept. Cuts and unions keep
the fallback: shelling a body in two pieces relies on it (a cavity tool grazing the
other piece), with the same depth and ignored volume as this case.
Fixes#3244
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Leave an empty unverified intersection as it was (#3244)
Only a doubted intersection that keeps one body whole is refused. An empty
one ("the bodies are apart") stays a result reported unverified: the clearance
and interference checks rely on it, and main's new
a_pin_through_a_d_bore_of_its_size_still_overlaps_the_flat (#2714) expects it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Open: show the design as its bodies are meshed, off the UI thread (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Open: hold screenshots until the design is meshed; profile lines
* Tests: time-bounded opens
* Open: a Loading parts n/N note while bodies are meshed
* Open: frame the design from outlines while it goes into the window
* Outline bounds: vertices and edges only; test
* Frame watch: the window thread's frame times by open phase (SOLIDCRAFT_PROFILE_FRAMES)
* Open: the picture grows in mesh order and stays once complete; refreshes pace themselves; named frame steps; watchdog test
* Open: outlines measured on the file worker and kept per body
* Open: draw the Home picture under the opened file's own key once meshed
* Format the open wait
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3324
* Sheet metal: refuse a flat pattern that no longer matches the body
A feature that is not sheet metal can change a sheet body's material
without its sheet model knowing: a mirror combined into it, an extrude
joined onto it, a fillet or chamfer on a corner. The flat pattern, the
DXF and the bend table then wrote the sheet as it was before, a part
other than the one in the design, with no warning.
The evaluator now notes, per sheet, the first such feature: one that
changes the body's shape while its sheet model stays the same. That
feature warns, and sheet.flat_pattern, sheet.export_dxf (also with
per_body) and sheet.export_bend_table refuse with "not supported yet",
naming it. A sheet metal feature, or machining the sheet keeps as
cut-outs, rebuilds the body from the model: it clears the note and
warns that the change is not kept. Moving the body, splitting its faces
and cosmetic threads leave the flat pattern as it is.
* Sheet metal: a modelled thread is refused in the flat pattern too
Only a cosmetic thread leaves a sheet body's material as it is. A
modelled thread cuts the thread profile into the hole, which the flat
pattern does not have, and a later sheet metal feature dropped it
without a word. It now marks the sheet like a fillet does: it warns,
the flat pattern, DXF and bend table refuse naming it, and the feature
that rebuilds the body says the thread is not kept.
A loft through two sketches on the same plane built a flat body of zero
volume and reported success, so the mistake surfaced later, if at all
(a measure of 0, or a boolean that did nothing).
`loft_wires` now checks each pair of consecutive sections: parallel
planes with the second section's centroid in the first's plane are
refused with "loft sections i and i+1 lie in the same plane (no volume
between them)". The tolerance scales with the section's distance from
its plane's origin.
Test: two circles on XY; the loft fails with that message and leaves no
body.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`PlaneRef::walk_exprs` stopped at `Flipped`, so a sketch created with
`flip` on an offset plane (`{plane: "XZ", offset: "d", flip: "x"}`) did
not list the offset as an input. Changing `d` rebuilt nothing that read
the sketch, and the model went stale.
`Flipped` now continues to its base, as `Offset` and `AtAngle` do, in
both `walk_exprs` and `walk_exprs_mut`.
Test: a loft between XZ and a flipped XZ plane offset by `d` has the
volume for d = 30, and for d = 50 after `parameters.change`.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: Convert to Sheet Metal keeps a plate where it is
* Convert to Sheet Metal keeps a plate where it is
Converted without bend edges, a plate moved by one thickness: a 100 x 60 x 2
plate on XY came out at z -2..0 picked on its top face, 2..4 picked on its
bottom. The sheet's frame (its base panel's bottom face, thickness along its
normal) was put on the plate's far face facing away from the picked face, so
the material grew out into empty space.
The frame now lies on the picked face with z into the material, as Convert
with bend edges does. The sheet is the old one moved back by the thickness:
same orientation, flat pattern, flange directions and pocket layers.
A test converts the plate from either face and checks its bounding box; the
engraved-plate test now checks the plate's position, not only its thickness.
Autosave serialised and wrote the whole design on the window's thread: about
120 ms on the Prusa Core One assembly (its 61 MB STEP text inside), a hitch
once per interval after every change, and more once saves keep the evaluated
model. A tick now takes a snapshot of the design (its Arc and what is hidden)
and writes it on a worker; a later tick takes up the outcome, and no new write
starts while one runs. Crash replays rebase onto the autosave only when the
design is still the one written. Save and close still wait for the write, and
dropping the autosaver lets a running write end.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude
The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.
Local spike branch; not for upstream as is (see the results report).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys
The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.
Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.
In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.
The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.
Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
* claim: #2678
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: timeline.dependents shares the evaluation cache (#2678)
The check before a delete evaluated the edited design on a fresh model:
it recomputed the whole timeline and left nothing for the delete. It now
evaluates on a copy of the session's model. Adds Ahead::replies for
running such checks off the window thread (the UI part is still to come).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Delete: check what a delete breaks off the window thread (#2678)
Both checks a delete makes first (timeline.dependents for the timeline's
Delete, the selection.delete dry run for Delete on the selection) evaluate
the history after the deleted feature, on the window thread. A part with a
slow feature froze the window for as long as everything after it took
(5.9 s in the report). They now compute off the window thread like undo and
the history marker: within the app's 150 ms wait they carry on at once,
otherwise the window says it computes and the delete (or the confirmation)
follows when the report is in. A design changed meanwhile is checked again;
a second Delete meanwhile is left out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* ci: run the checks again (the run for 3b94e8e0 was cancelled when the PR left draft)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* kernel: a blend runs along chains of several faces and lines closed rims up (#764)
A blend's chain may run along the boundaries of several faces (a tube's rim
along the halves of its wall): each edge continues from its own best-facing
face, read station by station. Before, a chain had to be the edges of one face,
so every rim of a revolved or cylindrical surface was refused.
Two closed chains blend from matching seams: the second chain's start (searched
by arclength, then narrowed) and direction are the ones that put each station
closest to its partner, so rims whose seams sit apart no longer twist. A
picked `seam` point on each chain fixes the start instead. A closed chain
against an open one is refused. Closed chains leave towards each other's
centroid, not a point on the rim.
Stations are read on the edges' own curves, not on the chords of the length
table (they sat up to the chord's sagitta inside a curved edge), and the
reported gap is measured to the curves.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: closed blend chains run round the same way; Hermite strip and seam tests (#764)
The second of two closed chains runs round the same way as the first (by
their area vectors), so a picked seam turns the blend by just the angle
between the seams instead of folding it over. The nearer pairing decides only
when the loops stand almost at right angles.
Tests for the issue's gates: the blend between two offset box rims is the
analytic cubic Hermite strip (control points from the chord) and keeps the
top faces' normal along both seams; picked seams a quarter apart turn the
blend a quarter round.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: `seam` picks where each chain's stations start (#764)
A point on each chain, saved with the feature (one pending format change),
moved with the design like `align`, and refused when it is not two points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* surface.blend: a test between two tube rims, their seams picked and saved (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* Blend dialog: edges at each end, continuity and bulge per end, stitch (#764)
SURFACE › CREATE › Blend Surface opens a dialog: the edges the blend leaves
and the ones it arrives at, each end's continuity (G0–G3) and bulge, and
Stitch to both bodies. Edit Feature brings it back and keeps what the dialog
does not show (align and seam points). Labels in every locale catalog.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* ROADMAP: M8 Blend runs along several faces, pairs closed rims and has a dialog (#764)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* kernel: a blend station on the vertex between two support faces is read on the neighbour (#764)
A station where a tube wall's two halves meet sits at a corner of one half's
parameters; with a leave direction that turns round the wall (tubes off each
other's axis) the shape could not be read there and the blend was refused. The
neighbouring chain edge's face holds the same point and reads it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* blend: review clean-ups (#764)
- ChainLine keeps one list of samples instead of four parallel lists.
- frames_on and boundary_gap take the chain's ChainLine instead of rebuilding it.
- A station is read on the neighbouring face only when it sits on the vertex the two edges
share, each face once, and each face keeps its own walk.
- The seam rule (a closed chain starts at it, an open one runs from the nearer end) lives in
ChainLine::start_at_seam; pair_with reuses the start of its both-ways search.
- support_faces projects with curveblend::project; loop_area sits with plane_through.
- surface.blend parses `align` and `seam` through one point_pair; the Blend and Ruled dialogs
share body_and_edges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the
plate's top face) could come out of the general boolean with the target's face whole over the hole
and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume
shows it and the sampled membership checks see the hole either way, so the result was kept. The
result check now refuses a body with a planar face lying back to back on another of its own planar
faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Iterate instead of indexing in nine loops
Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: ring_edges for the edges of a closed ring
Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Ring, a closed ring that knows it is closed
A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.
Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.
Replaces the ring_edges free function.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Chain, Ring and Path; bounds for a chain of points
Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: area and inside on Ring for any planar point
Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: sheet's closed outlines go through Ring
dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: cam tests build their outlines with Ring::from
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: area_vector on Ring<Vec3>; three Newell sums use it
Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb3 from points; boxes built and asked through it
Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.
A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb2, the plane's box; 2D folds and box tuples use it
Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.
Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* kernel: prism's segment boxes are plain Aabb2s
The SegBox alias named a (low, high) pair; Aabb2 says it itself.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow
Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box
Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
A line and a circle or arc can now be dimensioned to the circle's edge
(ConstraintKind::LineCircleDistance, saved as line_circle_distance): the gap
while the line misses the circle (0 is tangency), or how far the edge reaches
past the line when it cuts through (stored as `inside`).
Rebased onto main as one commit (the branch's own changes; its merges of main
dropped). Conflicts resolved: the test mod lines in cmd/sketch.rs (both kept,
sorted), and README.md, whose feature list main moved to docs/capabilities.md;
the line-to-circle dimension is listed there now.
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Co-authored-by: jyviko <jyviko@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>