Commit Graph
63 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 66ab6b7f9f kernel-cases: the rig runs SMLib only and keeps each run's SMLib dumps
SMLib is the only kernel now. cargo xtask kernel-cases ran every case once
per kernel asked for (--kernel default|smlib|both), setting
SOLIDCRAFT_KERNEL per run, and wrote a column per kernel; solidcraft-cli no
longer reads that variable.

The rig and the ladder run each case once, through solidcraft-cli built with
--features smlib (cargo run passes it), and report one result per case:
--kernel and the env var are gone. Each run has an output folder (--out,
default target/kernel-cases, target/kernel-ladder for the ladder) holding
results.json (every case's full result, which --results used to write on
request) and dumps/<area>-<case>/: every case runs with
solidcraft-cli kernel-cases --dumps=<out>/dumps, so a failed SMLib call
leaves its inputs for replay.

The ladder's golden holds one entry per case: golden.json is the last
recording's smlib entries, which predate SMLib running every case (its
reason says so); record it again after the first SMLib-only run.

docs/kernel-cases.md (until the next run regenerates it),
tests/kernel-cases/README.md, docs/kernel-smlib-sweeps-shell.md (its truck
column and comparisons dropped), xtask's and solidcraft-cli's usage text:
one kernel. Nothing was run.

clippy -p xtask --all-targets: clean.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-22 07:32:48 -04:00
jyvikoandClaude Opus 5.5 3c233ddf53 kernel: one switch, SOLIDCRAFT_KERNEL, picks the kernel for every operation
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 08:56:55 -04:00
bherbruckandClaude Opus 5.5 e5d5656e7c kernel-cases: count ranges, a watertight mesh check, and per-case timeouts
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
  thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
  and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 07:19:17 -04:00
bherbruckandClaude Opus 5.5 dd10d73ccb kernel-cases: coverage by kind of source, and the ring join of #2357
- tests/kernel-cases/sources.json gives each looked-at number's kind: an open or closed issue, a
  merged PR, one of the frozen truck-geometry PRs, a kernel-paused PR. The report's coverage by
  source counts how many of each were looked at, became cases or were skipped.
- crashes/2357: one join of a ring of 90 overlapping cylinder segments. The right answer is one
  closed ring body. The old kernel still panics in its intersection curves and runs past the
  timeout.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 07:15:20 -04:00
jyvikoandClaude Opus 5.5 b28f14ddad ladder: every ladder run measures one case at a time
Runs are compared with the golden's times, so a run sharing the machine between cases flags
slowdowns that are only contention (seen with --jobs 4: four cases two to ten times slower).
--jobs still overrides it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 06:54:08 -04:00
jyvikoandClaude Opus 5.5 b6fa86c14f ladder: cargo xtask kernel-cases --ladder, the complexity ladder's runner
The ladder orders kernel operations by complexity instead of by random goldens: a manifest
(tests/kernel-cases/ladder/ladder.json) lists tiers in order and each tier's cases in order;
every case is graded against its own answer like any rig case, and a golden
(tests/kernel-cases/ladder/golden.json) records per case and kernel the status, the commands'
time and what the kernel made. A run compares with the golden and flags slowdowns (over twice the
time and 0.25 s more), status changes and changed counts. `--record REASON` re-measures one case
at a time, rewrites the golden with its reason and sorts each tier by the first kernel's time.

The report, docs/kernel-ladder.md, gives per tier and kernel the counts per status and the
frontier: the first case in ladder order the kernel fails. It reuses the rig's process-per-case
runner, timeout and cells; results now carry their path under tests/kernel-cases/ so cases from
other areas can be listed in a tier. The README documents `base`, `missing` and the ladder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 06:54:08 -04:00
bherbruckandClaude Opus 5.5 457e63acf3 kernel-cases: shells as a graded count, no SMLib verdict where it can't take the record, $OUT
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
  holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
  #3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
  curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
  body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
  two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 06:22:03 -04:00
bherbruckandClaude Opus 5.5 6a03284ea9 kernel-cases: an smlib feature for the CLI, and no grading of a kernel the build isn't running
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
  `cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
  `default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
  run on a build without the switch reports "not supported yet" instead of grading the default
  kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:31:54 -04:00
bherbruckandClaude Opus 5.5 57bc3c5623 kernel-cases: a regression rig that grades each kernel against the case's own answer
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.

- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
  (succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
  record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
  volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
  not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
  or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
  and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.

tests/kernel-cases/README.md gives the format.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 05:23:13 -04:00
Brennen HerbruckandClaude Opus 5.5 1b7152a7a8 STEP geometry as plain data: read and write ISO 10303-42 curves and surfaces without truck
A new crate, solidcraft-step (L1, no modelling backend), holds the Part 21
parser (moved from the kernel, which now reads through it) and STEP geometry
as plain data: lines, conics, B-splines (rational and implied knots),
polylines, trimmed curves, surface curves with their pcurves, 3D offset
curves; planes, cylinders, cones, spheres, tori (degenerate too), B-spline
surfaces, revolutions, linear extrusions, offset and rectangular trimmed
surfaces. Each keeps STEP's own definition and parameterisation, in mm and
radians, with pcurves scaled by their surface's parameter units. Shared
entities stay shared. A writer emits the same entities back, deduplicated.

Tests per entity check values against analytic points, units, round trips
and hostile input; an ignored test reads and round-trips every edge curve
and face surface of the tangency-labs/models STEP files.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:36:00 -04:00
Brennen HerbruckandClaude Opus 5.5 d139a66afa solidcraft-smlib: SMLib statically linked behind its C API, with a safe wrapper
A new crate (L1, only the kernel uses it) builds tangency-labs/smlib's SMLib,
SM_API and C API with the cc crate when its `native` feature is on, from the
commit in crates/smlib/SMLIB_REV (scripts/fetch-smlib.sh fetches just those
sources). The kernel's `smlib` feature turns it on. Without it nothing C++
is built and every call returns NotBuilt, so workspace builds need no C++
toolchain.

unsafe is confined to src/ffi.rs. The wrapper owns handles, maps statuses to
errors, checks the C API version, and sends SMLib's per-call log to the log
crate. Crash reports note the native kernel call in flight.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:31:31 -04:00
Nathan Dane 1122cd44b8 UI library, tokens, fonts and icons (step 5 of #2016, after #2287) 2026-10-20 21:00:56 +02:00
CypherNaugh_0x 8e762fee57 Add optional ambient occlusion and graphics quality presets (#1135)
Thanks @CypherNaught-0x.
2026-10-18 21:29:03 -04:00
bherbruckandClaude Opus 5.5 a587d3339e Tests: more time for the web offline launches and the icon review server
On a busy CI machine (several fork jobs under gVisor at once) a web
offline launch took over 90 s and the icon review server took over ~2 s
to answer. Launches now get 240 s and one retry; the review server gets
up to 60 s to start.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 00:11:14 +00:00
Mikalai Kukhta 180e62c981 Macos space mouse support (#1815)
Thanks @NecroKote.
2026-10-17 18:15:15 -04:00
Thomas Kroll a11446fd17 Web: a launch behind an expired sign-in shows the sign-in instead of the kept build (#2151)
Thanks @nofuturekid.
2026-10-17 17:54:29 -04:00
Olup 4193ea26ac Expose a JavaScript command API for the browser app (#1713)
Thanks @olup.
2026-10-17 06:54:16 -04:00
The Nomad e052d19879 3D mouse: any HID multi-axis controller with motion axes (#1880)
Thanks @nomadsgalaxy.
2026-10-17 06:48:02 -04:00
Nathan Dane 64966bab88 Implement the reviewed UI icon system and durable review workflow (#853)
Thanks @Nathan-Dane.
2026-10-17 04:07:16 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
Irakli Kourtis 1a0b33fcf3 Headless pictures draw on the GPU, with the viewport's pipelines (CPU rasterizer as last tier) (#1555)
Thanks @jyviko.
2026-10-15 22:19:26 -04:00
bherbruckandClaude Opus 5.5 f08ed74617 Keep the files many PRs add to conflict-free (#1564)
Message catalogs sorted one message per line (cargo xtask lists [--fix], checked in cargo xtask ci and the Lists workflow); the language list one per line, English first then by id; THIRD-PARTY-LICENSES.txt and docs/features.md rewritten on main by the Generated files workflow instead of in PRs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 21:59:52 -04:00
Jackson OurslandandClaude Opus 5.5 78242d67d1 Import FreeCAD and Rhino files through cadmpeg (#1435)
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.

Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.

Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 19:30:03 -04:00
Jan Szumiec e8c340c59d Web: installable as an app, with Install in the File menu (#1233)
The web build ships a manifest so the browser can install it as an app, and offers Install in the File menu while the browser allows it.
2026-10-15 11:34:57 -04:00
JIJINBEIandjijinbei 464a6dfad4 Feature walks: generate them from field roles with #[derive(Walk)] (#1251)
The three walks over a feature (expressions, references, geometry) are generated from FeatureKind by #[derive(Walk)] in a new proc-macro crate, solidcraft-derive, from #[walk(...)] attributes written next to each field. The hand-written walks in params.rs, feature_refs.rs and feature_geometry.rs are gone; Ruled Surface and Extend have their attributes, and the three golden walk records are unchanged.

Co-authored-by: jijinbei <jijinbei@users.noreply.github.com>
2026-10-15 00:13:53 -04:00
bherbruckandClaude Opus 5.5 c159a3e277 Action matrix: nightly shards cut by measured cost, a fresh baseline, and a determinism check (#1256)
* Action matrix: nightly shards cut by measured cost, heavy designs in slices, and a determinism check

The full matrix ran as four fixed quarters of the corpus and two of them hit the 60-minute
job limit. Now action_matrix_shard runs shard k of n (ACTION_MATRIX_SHARD=k/n), planned from
tests/action_matrix/costs.json: designs that take more than five minutes are split into slices,
and the pieces go largest first to the least loaded shard. The nightly runs 12 shards and uploads
each one's outcomes and timings; cargo xtask action-matrix --from DIR --bless records them in the
baseline and costs.json without running the matrix again. action_matrix_determinism runs a sample
twice and lists any action whose outcome changed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: costs measured on runners, 10 shards, determinism on the lighter designs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: baseline and costs from a full run on main, 16 shards, timeouts listed

The baseline is regenerated from the 10 shards' results of a full run on 01b1b705
(cargo xtask action-matrix --from DIR --bless): 8 new designs, 302 actions that pass now,
names that changed, and 40 actions that passed before and fail now, each listed in #1255
(22 fillets refused since #949, 4 hinge blends since #1101, 9 on the loft cut, 5 single).
costs.json now holds every design's measured time, and the nightly runs 16 shards of about
17 minutes. An action that passes in the baseline and times out is listed but not judged,
and stays passing when blessed: two runs of the same build differed only on 10 actions that
took 50-84 s against the 90 s limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: slice heavy designs by a hash of each action's name

Slicing by index gave some slices only fillets on oracle 41 (28 slices, a multiple of the
actions per edge), three times the planned time; two shards ran past their limit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 21:18:11 -04:00
bherbruckandClaude Opus 5.5 ac84491638 test: web-offline-test reads the worker's caches without opening them (#982)
The state probe opened every cache it listed; when a worker deleted one in between, the open made it again, empty, and the next wait timed out. The probe now reads each cache with caches.match over the builds' files and marks, which never makes a cache (3 failures in 20 runs before, 0 in 30 after). The worker only ever starts a complete build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 02:54:45 -04:00
Nathan Dane 9f76cca8b4 Collect application resources for #433 (#833) 2026-10-14 00:49:32 -04:00
Jan Szumiec 4bea4c7785 Make the web app work offline and update itself (#239) 2026-10-13 23:40:19 -04:00
NolyandNoly1990 45f92277cb i18n: complete Simplified Chinese catalog, Chinese font fallback and a coverage xtask (#930)
Adds a complete Simplified Chinese (zh) catalog covering every English message, a font fallback for Chinese text, and `cargo xtask i18n --check`, which checks that the complete catalogs (ja, zh) carry every English message and that every command label is translatable.

Co-authored-by: Noly1990 <20500931+Noly1990@users.noreply.github.com>
2026-10-13 23:00:39 -04:00
Irakli Kourtis ff7a347013 Display tessellation plans (3/4): display meshes from plans, GPU evaluation in the viewport (#805)
Display meshes are built from tessellation plans, with GPU evaluation in the viewport.
2026-10-13 16:27:16 -04:00
Irakli KourtisandClaude Opus 5.5 c8d668108a Surface toolset: icons and planned commands (#808)
Icons for the surface toolset, and its planned commands registered and disabled with the issue that tracks each one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 14:28:38 -04:00
Irakli Kourtis 8cdefd4cd5 test: reference cases for variable, chord-length and tapered fillets (#776)
Four analytic reference cases for variable, to-zero, chord-length and taper-to-fit fillets, with the formulas in tools/oracle-analytic.
2026-10-13 12:35:16 -04:00
bherbruckandClaude Opus 5.5 736d9277b8 Action matrix: every ordinary action on every face, edge, vertex and body of the design corpus (#553)
apps/solidcraft-cli/tests/action_matrix.rs tries sketch, offset/angle/mid planes, press pull, extrude from a face, hole, draft, shell, fillet, chamfer, axes, points, planes, projection, move, copy, mirror and pattern on the final bodies of 104 designs (the old design files, the examples, the 76 reference recipes, the enclosure demos, the Pi case built through the UI, eight typical parts), through the commands and picks the desktop sends, each design in its own process, with an edit round on a sample of passes. tests/action_matrix/baseline.json is a ratchet: an action that passed there and fails now fails the test; newly passing ones are reported for cargo xtask action-matrix --bless. Every CI run checks a fixed sample; the nightly Action matrix job runs the whole matrix in four parts. 30,567 of 35,576 actions pass (85.9%); results and causes in docs/action-matrix.md, one ignored reproduction per open cause (#556-#568).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 02:41:17 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruckandClaude Opus 5.5 6090e89b3f Release under the SolidCraft name: binaries, assets and installers (#383)
* Release under the SolidCraft name: binaries, assets and installers

The desktop binary is now `solidcraft` and the CLI `solidcraft-cli` (the two app packages
are renamed; their folders move with the rest of the rename later). Every release asset is
named solidcraft-<ver>-… / SolidCraft-<ver>-windows-x64.exe, and the installers show the
SolidCraft product name.

Kept so existing installs keep updating (docs/compatibility.md):
- `solvecraft-cli` alias binary in every package, forwarding to solidcraft-cli with a
  deprecation note on stderr (tests/legacy_alias.rs).
- Linux app ID ai.storyteller.solvecraft (Flatpak ID, desktop entry, Wayland app_id).
- MSI UpgradeCode, so the MSI upgrades in place.
- deb Replaces/Conflicts/Provides and rpm Obsoletes/Provides solvecraft.
- An old-named .zsync copy so earlier AppImages find updates; a legacy .flatpakrepo copy.
- .solvecraft file associations; SOLVECRAFT_* fallbacks in the packaging scripts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

* MSI: register the legacy .solvecraft extension without a duplicate open verb

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 16:05:35 -04:00
bherbruckandClaude Opus 5.5 3b8028a040 Retire legacy reference data and the external command catalog (#302)
- Remove xtask/data/fusion-catalog.tsv and xtask/data/fusion-ids.tsv.
- Remove the legacy command-id table (crates/engine/src/legacy_ids.rs) and its use in
  find_command and in the shortcut, recents and pinned-command loaders. Only SolidCraft's
  dotted ids name commands; any other id is an unknown command.
- Boundary Fill's id becomes solid.boundary_fill.
- Replace the parity report with SolidCraft's own feature checklist: `cargo xtask features`
  writes docs/features.md from the command registry.
- docs/oracle.md, docs/step-import.md (corpus section) and docs/iges-import.md: reference
  results are being rebuilt on analytic and open-source (FreeCAD) values; see #292.
  `cargo xtask oracle` and `cargo xtask step-corpus [--iges]` write these placeholders.
- AGENTS.md, CLAUDE.md, CONTRIBUTING.md, README.md, ROADMAP.md and the book describe
  SolidCraft as independent, with reference tests on analytic values and open-source tools,
  and agents do not drive or extract data from commercial CAD products.


Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:19:15 -04:00
e12758ff91 Public reference tests: analytic and FreeCAD expected values (#310)
The oracle no longer uses Fusion measurements. tests/oracle/<case>/ now holds the 76 recipes
(our own format, with recorded measurements and tool-specific fields removed) and an
expected.json per case:

- 55 analytic cases: closed-form values from tools/oracle-analytic/ (stdlib Python, formulas
  in each case's "method").
- 21 FreeCAD cases: the same recipe built with FreeCAD's public scripting API by
  tools/freecad-oracle/ (an external program, not a dependency), with a reference.stl for 20.

solvecraft-cli oracle compares body count, volume, area, centre of mass, bbox, face counts
where the geometry fixes them, and, against reference.stl, the sampled Hausdorff distance and
the principal moments (spatial.rs from #301). cargo xtask oracle reads tests/oracle, writes
docs/oracle.md with the source of each value, and supports known_failure marks for tracked
bugs. CI runs it on every PR; a manual workflow regenerates the FreeCAD values. step-corpus,
seam normalisation and the through-all emulation, which only existed to compare with Fusion,
are removed.

75/76 pass; 75-sm-bracket-holes is a known failure (#296).


Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

Co-authored-by: bherbruck <bherbruck@herbrucks.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 10:43:43 -04:00
Phaiz Mithriln 4fbf19f2f9 feat(web): self-host Japanese font and load on-demand without external CDN
- Bundle BIZ UDPGothic Regular (SIL OFL 1.1) exclusively in solvecraft-web dist

- Remove external jsDelivr CDN fallback; fetch font solely from same-origin ./fonts/

- Fetch Japanese font on-demand only when UI language is set to Japanese

- Gracefully fall back to English UI on fetch failure to prevent tofu glyphs

- Update ATTRIBUTION.md, NOTICE, and THIRD-PARTY-LICENSES.txt
2026-10-12 10:06:50 -04:00
lillith df4c8a2994 Reconstruct constant-section meshes as parametric solids 2026-10-12 10:06:42 -04:00
bherbruck af536a7907 Rename displayed product to SolidCraft and add header bug reporting 2026-10-11 16:16:48 -04:00
bherbruck 07932d0f42 feat: preserve modeling intent across sketches, assemblies, and fabrication
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.

Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
2026-10-11 01:28:01 -04:00
bherbruck 6f16b31771 Fix viewport input leaking through dialogs
Use egui pointer ownership for viewport navigation and picking, view-cube
interaction, and sketch-dimension hover. Cover scrolling, model selection,
and cube interaction under floating dialogs, including after they close.
Shield constraint glyph and move-gizmo highlights from overlapping UI too.

Clear strict Clippy warnings and use the same saved path in the recent-file
scenario on Windows and Unix.

Fixes #87
2026-10-10 17:34:14 -04:00
CypherNaugh_0x 29796762de cargo xtask test runs every test binary at once (cargo test runs them one after another): 323 s to 75 s on 12 cores. cargo xtask ci runs the quick gates (fmt, assets, licences, layers) first, then clippy, then the tests with the wasm check and doc tests alongside; the wasm check uses the ci profile to reuse clippy's host build scripts and proc macros. GitHub CI runs its tests through cargo xtask test 2026-10-10 13:24:08 -04:00
bherbruckandClaude Opus 5.5 448ea769eb CI builds tests and lints with a ci profile instead of --release
Light optimisation (deps at 2), line tables only, no LTO, debug assertions off (truck's debug-only
checks reject valid geometry, the only reason tests used --release). Cold full `cargo xtask ci`: 14 min
with all 647 tests passing; the oracle, step-corpus and app builds stay on --release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 15:48:43 +00:00
bherbruckandClaude Opus 5.5 a7fe0429f0 IGES reader checked against Fusion's IGES exports: 75 of 76 reference parts read back exactly; cone tips read whole
`cargo xtask step-corpus --iges` (and `solvecraft-cli step-corpus --iges`) opens every oracle part.igs as File → Open does and compares body count, volume, area and face count with Fusion's measurements, writing docs/iges-import.md. The run found faces closing at an apex (a drill point's cone, a sphere's pole: the seam runs out to the apex and straight back) kept whole and meshed wrongly; they are now split along the iso-line opposite the seam like bands are (18-hole-features and 40-box-sphere-torus pass). The one failure left, 50-sweep-tight-bend, is written by Fusion as five loose, partly degenerate surfaces that Fusion cannot read back as a solid either; documented in the report. Test: a drilled blind hole round-trips through IGES.

Fixes #14

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:56:53 +00:00
bherbruckandClaude Opus 5.5 132acc9863 Perpendicular Plane (construct.plane.perpendicular {plane, line}): the plane through a straight edge, sketch line or axis, square to a plane or planar face; a line square to the plane is refused (no single answer)
Fixes #20

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 05:00:55 +00:00
bherbruckandClaude Opus 5.5 bf2b64f597 Releases offer plain programs; the licences are built in
Release assets are now the programs themselves: SolveCraft and solvecraft-cli .exe for Windows,
plain Linux binaries plus the AppImage, a macOS .dmg (SolveCraft.app with an Applications link) and
the universal CLI binary; only the web app stays a zip. The notes template takes {tag}, says to
chmod +x on Linux and macOS, and GitHub adds the change list.

Since no LICENSE or NOTICE file rides along any more, the programs carry them:
THIRD-PARTY-LICENSES.txt (written by `cargo xtask licences` from cargo metadata and each shipped
crate's own licence files, 419 crates; `cargo xtask ci` checks it is current) is embedded with
LICENSE-MIT, LICENSE-APACHE and NOTICE in solvecraft_engine::licences, shown in Help ▸ About ▸
Licences (third-party text laid out by visible rows) and printed by `solvecraft-cli licences`.
Scenario s44_about_licences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 17:53:19 +00:00
bherbruckandClaude Opus 5.5 0d7e456bc1 Documentation site and CI workflows
An mdBook under docs/book: a user guide (getting started, UI tour, sketching, features,
parameters, components and joints, sheet metal, plastic, files, shortcuts, MCP) and a developer
guide (CONTRIBUTING, architecture, command engine, kernel boundary, persistent naming, test
harnesses, and the existing docs/*.md pages). `cargo xtask book` generates the command reference
from `solvecraft-cli commands` and renders the screenshots with `solvecraft-cli snapshot`, then
runs mdbook. .github/workflows/pages.yml publishes the book at /solvecraft/ and the web app at
/solvecraft/app/ (skipped while the repository is private). .github/workflows/ci.yml runs
`cargo xtask ci` on pull requests. README and Help → Documentation link to the book.

Fixes #28
Fixes #8

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-09 13:25:38 +00:00