Commit Graph
350 Commits
Author SHA1 Message Date
brett19andClaude Opus 5.5 bd4dc081d2 Known failures on solidcore after the merge: the refused curvature and variable rounds, develop's new cases
Rebuilt from the trapped nextest run (11497 ran, 51 known failing, no regression) and the rig on
solidcore (968/1014). The curvature fillets (solidcore#2250, #2260) and variable-radius fillets
(solidcore#2250, #2262) are refused, so their tests and rig cases are listed as such, the
rig's as [unsupported]; a law with a corner stays refused as before (solidcore#430). develop's
new junction and turn cases fail on solidcore as on SMLib d01d7b0.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 13:58:40 -07:00
brett19 ff894bfb67 Merge smlib 4afadeed5 (develop 6ba069d06, main 176c22aca) into solidcore
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz

# Conflicts:
#	crates/smlib/src/ops_tests.rs
#	tests/KNOWN_FAILING_TESTS
2026-11-01 11:16:50 -07:00
brett19andClaude Opus 5.5 c494a18f98 Rig: the reimported peg's rounds fail as the peg's do
fillets/report-peg-step-front-and-concave-rounds-together-r2 no longer
fails with 1001 on solidcore: since solidcore#2198 (cb9e544ab, WR-641) an
extended rail end whose section cannot be solved is skipped, and the round
builds as fillets/report-peg-front-and-concave-rounds-together-r2, the same
peg not written to STEP, already does: a seam G0 at (32, 2, 10) and the
tight box 6.5e-3 below the front face y = 0, where the exact box is
(0, 0, 0) .. (48, 16, 20). The case stays listed, with that reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 10:36:47 -07:00
jyvikoandClaude Opus 5.5 60393a7183 Ladder: the variable rounds graded to 1e-6 by the union of their balls; 012 by its law going on past the edge
At the default 1e-3 the great circles' volumes (4e-6 off) passed too. SMLib builds each within
1.6e-7. The golden takes the new volumes and areas; counts unchanged. The G2 corner test listed
as failing passes on SMLib's step 3 and leaves the list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 1745e5c389 Kernel rig: the variable round on its cone passes (the round is the balls' envelope)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 01e2e939e9 Variable rounds: graded by the union of their balls (their envelope), not the balls' great circles
The smlib crate's laws and ladder 005, 006, 007 and 012 take the volumes the balls' envelope
removes; the law with a corner is its own test, listed as failing until the corner step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 cf5e0e3c10 Kernel rig: a junction family: oblique wedges 30 to 150 degrees rounded and chamfered (exact), bosses upright and tilted, pipe tees and a Y junction
Four are listed with their causes: the equal-pipe tee (its exact conic-pair rounds meet at the
ellipses' crossings in a corner the old corner code cannot join), the tilted bosses (1001, before the
blend rework too) and the Y junction (refused for room at its triple points).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 7577e032fb Kernel rig: the turn at a corner of two rounds, Mitre (the default) and Swept, at a pocket's floor and a boss's base, by exact volumes
A round's spandrel A = (1 - pi/4) r^2 and its first moment about its wall M = r^3 (5/6 - pi/4):
Mitre adds L A -+ 2 M per edge (cut at, or run on to, the corners' bisector planes), Swept turns
the section about a convex corner's edge, (pi/2) M a corner, and refuses a concave corner rounded
less than the ball. The pocket's tangent chain round its R3 corners is a torus each. Graded to
1e-7, where Mitre and Swept differ by 6.6e-6. The Swept cases are listed until solid.fillet
takes a turn.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 539d126489 Kernel rig: four G2 corners wait for the corner step: their patch meets the new section's rounds G1 at one face seam
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 4df3adc5a7 Curvature fillets: the section's default thumbweight is equal area, so the round's volumes are the circle's
On the round's rails the order-2 section takes off what the ball's circle does: (1 - pi/4) s^2 at a
square corner, first moment 0.0474559669443 s^3 (w = -0.5252123889). The kernel and engine tests
and the curvature rig cases take their volumes from it by their own methods; the pipe on the plate
from its own wedge (70.52878 degrees, w = -0.8544103493). The G2 corner patch's seam test is listed
until the corner step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 19455396be Kernel rig: the curvature fillets' expected bodies from the order-2 section at thumbweight 0
SMLIB_BLEND_CURVATURE's section is now the order-2 G^n section at thumbweight 0. Between two
planes square to each other it cuts A = 0.154192655384275 s^2 off the corner, its first moment
about either face 0.0291753295725360 s^3 (Green's theorem on the section): the curvature cases
built on that corner (862, 2708, every-box-edge, every-hole-top-rim, every-l-bracket,
every-block-cylinder-crease, the three-edges-at-bar-corner reports, 3604's fillet) take their
volumes from it by their own methods, the peg's front blend 23.3237146876 (its section along x
up to the wall). Between planes the section's t^3 term vanishes (their feet are linear in the
distance): the box edge case is exactly G3. The boss root is a certified fit, G3 to the plate and
G2 to the wall at Continuity Analysis's tolerances: at least G2. The boss root and the pipe on
the plate pass on SMLib's section and leave the known-failing list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
jyvikoandClaude Opus 5.5 922ee28f37 Kernel rig: the section orders, chord, circle and curvature section, on planes and against a cylinder
Eight fillet cases for the blend's cross-section by its order of contact with the faces, each
graded on its analytic volume at rel 1e-7 and its exact continuity (the order, and not the next):

- a box's top back edge chamfered 3 (G0), rounded r3 (G1) and curvature-rounded 3 (G2): the
  areas cut off the corner s^2/2, (1 - pi/4) s^2 and 113/756 s^2, the last by the default
  thumbweight's definition;
- a pipe R10 dipping into a plate, its concave edge chamfered 2 (the chord between the contacts of
  the ball SMLib rolls for that setback, radius 1), rounded r2 and curvature-rounded 2, each
  section's added area by Green's theorem along the plate, the section and the pipe's arc; the
  order-2 section is built from the faces' feet of the point at distance d from both, which on
  the pipe are not linear in d;
- a boss root curvature-rounded 2, the square corner's section revolved (Pappus);
- a variable round r1 to r5 along a box edge (rel 1e-5): the balls' envelope is a circular cone,
  and the volume is the cone's sections integrated along the edge.

Three fail today and are listed: the two curvature rounds whose faces are not a square corner of
planes (SMLib's quintic blend curve, not the order-2 section: rel 6.5e-7 and 1.2e-5) and the
variable round (great circles, not the envelope's: rel 4.8e-5). The other five pass on SMLib
7ac037e.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:00:02 -05:00
brett19andClaude Opus 5.5 f2ce343a0b Known failures after the new fixes: four tests and a rig case pass
They pass now and are un-listed: the convex-edge chamfer refused as too
large (solidcore#2175), the thickened spherical cap (#2174), the
thickened B-spline patch (#2111), the extrude reading back the region
clicked (#2177), and the rig's round of cylinders touching at a point
(#2110). solidcore now passes the six self-crossing intersection cases
it missed against the C++ kernel (ssi_split_curves_at_singular_points:
off, they miss again), so the corpus test asks for no miss at all.

Listed: the moved-top offset test's C++ comparison, as solidcore's
offset edges keep their tolerances and the pinned C++ kernel's don't
(both stay 1.2e-8 to 3.1e-7 off the closed form). The tabbed plate test
gets past the corner arc alone (#2176) and fails later, on the rim and
a corner arc rounded together, each of which builds alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-01 04:56:15 -07:00
brett19andClaude Opus 5.5 462738b6aa Known failing after the smlib merge: the r5 test-peg corner on solidcore, main's C++ test lines
The r5 case's corner patch stands 1.56e-3 out of the front face on solidcore (it passed before the merge); the C++ list takes the four lines main's tests added on smlib.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 23:59:59 -07:00
brett19andClaude Opus 5.5 cd94f78f31 Rig: --route is gone; a run has one kernel
The per-family runs (`solidcore[boolean,measure]`) needed the process to mix kernels, which the
kernel choice is about to stop doing. --route is refused with a message, so a script that still
passes it does not run as something else. The report's labels went with it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 21:48:04 -07:00
brett19andClaude Opus 5.5 b04e363e73 Rig: #316's renamed shell cases pass on solidcore, off its known-failing list
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 16:51:05 -07:00
brett19andClaude Opus 5.5 5dffd4f585 Merge origin/develop 05f5e8601 (#316's bottom rounds, kernel-case data only)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 16:50:50 -07:00
brett19andClaude Opus 5.5 6221b7f4bf Rig: solidcore known-failing lists at pin de85a3e00
From the rig on this branch, 949 of 974 and one timeout: threads/3368-two-faceted-prisms-cut-then-joined
is not listed, it takes 160 s alone against the 180 s limit and passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 16:50:50 -07:00
jyvikoandClaude Opus 5.5 05f5e86011 Kernel rig: #316's bottom rounds as large as the wall, or larger, shell with a step wall at the opening, not refused
Where the round meets the open bottom the cavity's wall steps down along the bottom's normal, so the
round meets it at 90 degrees and the opening is exactly the picked face. The cases are renamed and
graded on the exact volumes, and come off the shell known-failing list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 19:19:29 -04:00
brett19andClaude Opus 5.5 25d376f0f5 Merge ws/pin-9 into ws/default-solidcore
Keeps the failure dumps on solidcore's brep_copy; KNOWN_FAILING_TESTS stays
solidcore's, KNOWN_FAILING_TESTS.smlib takes develop's C++ list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 14:59:38 -07:00
brett19andClaude Opus 5.5 df6a65bea4 Merge origin/develop aa41c0b5d
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 13:25:23 -07:00
jyvikoandClaude Opus 5.5 aa41c0b5de Kernel rig: the fillets known-failing list is the 22 cases that fail on SMLib 7ac037e
Twelve listed cases build on the new blend's end event and exact classes, or were already
built on develop: they come off the list.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 73416a9bf0 Kernel rig: the exact-class rounds pass on SMLib's classified exact rounds
The rounds now come as the rational surfaces their classes give, closed ones as two faces split
at their seams, the touching pipes' as four: one splines entry a face, each of the class's degrees.
Their KNOWN_FAILING lines go.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 19014f38a0 Kernel rig: constant rounds of the exact classes, and a tee's round
A plane cutting a cylinder or a cone at an angle, a sphere or a cone coaxial with the other face, a
cone and a cylinder touching one ball, two pipes touching at a point: their rounds' centre lines
are rational, so the rounds are rational surfaces of degrees fixed by the construction ((4, 2),
(2, 2) revolved, (6, 2), (12, 2)). The tee's centre line is not rational; its round is graded on
its volume. Volumes from the divergence theorem over the exact pieces, at rel 1e-6. The six that
SMLib 0cc48bd traces are listed in KNOWN_FAILING with what they come out as.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 4401ffb1f9 Rig: the test-peg's concave chamfer, alone and after the front chamfer, builds
With SMLib's tangent end as an event of the fillet's trace (blend-end-event 6d73e4f), the
concave chamfer's rail on the cylinder ends where it crosses the seam along which the front
face runs tangent into the cylinder, continued past the vertex, and its end rib on the front
face is built from there. report-peg-concave-chamfer-d2 and
report-peg-front-chamfer-d1-then-concave-chamfer-d2 pass and leave KNOWN_FAILING. The two
chamfers together still fail, now at the mixed-convexity corner where they meet: its line says
so. Rig against SMLib 0cc48bd: no area regresses (963/993 pass, 961 on a87c502), ladder 168/168,
kernel lib only its listed failures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 6cd4003adb Rig: the curvature-continuous corner cases pick the curvature fillet
The six corner cases added in 3a854104a took the fillet's default type, on the premise that the
default would become curvature-continuous. The default stays the circular round, so each case
now asks for the curvature fillet itself (type curvature: curvature-continuous sections and
corner patches) and keeps its grading: every seam of the rounds and of the corner patch G2, one
valid body. They are renamed from cov-fillet-g2-default-* to cov-fillet-g2-*.

The oblique three-edge corner (a block drafted 15 deg) and the pocket corner pass. Four fail, as
KNOWN_FAILING now says:

- the corner beside a cylinder: the curvature fillet builds its sections only between planar
  faces;
- the four- and five-edge apex corners: refused because the default setback is shorter than
  where the rounds' contact lines meet (3.90 and 3.51 mm from the apex);
- the mixed corner: SMLib sets back a corner only where its edges are all convex or all
  concave.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 be0b1b39bd Rig: the test-peg's front chamfer builds
With the SMLib fork's smlib-tangent-ends (a rail's end on its side edge is the rail/edge
crossing), report-peg-front-chamfer-d2 passes. Its line leaves KNOWN_FAILING, for the pin that
carries that fix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 a3165f62d2 Rig: fillet corners graded curvature-continuous, the default to be
Six fillet cases that pick their edges with no type, so they take the fillet's default, which the
owner has ruled is to be curvature-continuous (G2) at every corner, with circular rounds kept as
an option. Each grades every seam of the rounds and of the corner patch G2, on one valid body:

- an oblique convex corner (a block drafted 15 deg);
- a four-edge and a five-edge apex corner (pyramids lofted to a point);
- a pocket's concave corner;
- a mixed corner (a step: one concave edge, two convex);
- a corner beside a cylinder (the top corner of a half cylinder).

All six fail on SMLib 2fc375f, listed in KNOWN_FAILING: today's default is the circular round,
whose seams jump in curvature by 1/r. On the five-edge apex the corner patch also meets two
rounds at 8.45 degrees (G0).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 2273379056 Rig: blends that end where their face runs tangent into another
Fifteen fillet cases on the test-peg's shape with clean numbers: a bar 40 x 16 x 10 whose far
end is a half disc R8, a disc R8 standing 10 on its top, joined, so the front face runs tangent
into the cylinder along x = 40 and the front top edge (convex) meets the concave arc of the top
tangentially there. Each blend ends on a face tangent to the one it rolls on.

- Rounds: both edges together at r2 and r5; one after the other in either order at r2, and at
  r1.5 and r3; the front edge alone as a curvature round, whose end on the cylinder is a
  semicubical cusp. The containment invariant (the unblended body's exact box, to 4e-5) and
  G1 seams, or the analytic volume where the blend has a closed section.
- Chamfers: the front edge alone and the concave arc alone (analytic volumes: the section along
  x up to the wall, the cone's spandrel ring clipped by the sides), both together, and one after
  the other (1 then 2).
- STEP: the peg written to STEP and read back, its front edge rounded (analytic) and both edges
  rounded together.
- A cone: the peg drafted 5 deg, whose front face runs tangent into a cone along a generator,
  its front edge alone and both edges together.

The quadratures are tanh-sinh, converged to 1e-13; SMLib's own volumes of the passing analytic
cases agree to 4e-9. A sphere is left out: a plane meets a sphere tangentially at a point, not
along a seam, so it is not this ending.

On SMLib 2fc375f eight fail, listed in KNOWN_FAILING: every chamfer that ends tangent (status
1001, SmFilletNx1Corner), the two rounds together (the corner patch 0.0374 at r2 and 0.128 at r5
out of the front face, and the rounds meeting with normals 180 degrees apart where their
contact lines on the top cross), the same on the STEP-read peg (status 1001) and on the drafted
peg (its corner refused as unsupported).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 2c75cf424f Rig: the test-peg corner at r5 and r7
Two more fillet cases, the reported part's concave arc and front top edge rounded together at
r5 and r7, with the same exact-box containment check (graded to 4e-5, the corner patch's
tolerance). On SMLib 2fc375f the corner patch stands 0.128 (r5) and 0.230 (r7) out of the
bar's front face (box y min -0.0699 and -0.1723): listed in KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
jyvikoandClaude Opus 5.5 3c16884f7c Rig: the test-peg's concave arc and front top edge rounded together stay within the body's box
A new fillet case, report-fillet-concave-arc-and-front-top-edge-together-solver-residues:
the reported part's bar (with the sketch solver's residues) whose sides run tangent into the
cylinder, its concave arc and front top edge rounded r2 together. The plane of the front face
bounds the whole body, so every blend lies within the unblended body's exact box (SMLib's tight
box); graded to 4e-5, the corner patch's own tolerance. On SMLib 2fc375f the corner patch
stands 0.0374 out of the front face (box y min 0.0205): listed in KNOWN_FAILING.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 14:33:44 -04:00
brett19andClaude Opus 5.5 c26f9760de Merge develop b0d1ba345 into solidcore
SMLib moves to 26cc451 with develop. Merged cleanly; the kernel test
changes are develop's, moved or tightened.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
2026-10-31 06:48:37 -07:00
jyvikoandClaude Opus 5.5 b0d1ba3457 Kernel rig: the three spline walls' face counts wait for the one-wall decision; their volumes grade them
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 a250062c29 Kernel rig: 1985's enclosure is 78 x 77 (74 and 73 inside, 2 mm walls); its volume 38063.827 by hand
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 57edcf61ac Kernel rig: the oblique-cut round keeps its old grade until the new blend algorithm lands
Its seams grade needs the continuity check to skip the body the round is not on. Fillet cases
wait for the new algorithm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 cd56cd3ad4 Kernel rig: 3841 is 168's rim touching its coin along a circle, and 4092's reduced recipe is its report less a flange clear of the failing join; the kept cases carry their sources
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 6c2a2f3959 Kernel rig: the oblique-cut round graded by its seams (tangent, not curvature-continuous); the flanged rhombus says what it tests (its reliefs stay apart at 60 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 37a4c56477 Kernel rig: the three modelled-thread joins and the fine M48 graded on their volume (the basic profile's groove, Pappus)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 889a2f866c Kernel rig: the cut mirrored loft graded on the box its sections pin
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 8e0f6403c3 Kernel rig: the hub's six swept grooves graded on its volume (the revolved hub less each tube's part inside it)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 130f2adaf7 Kernel rig: the two G0 window patches graded on the box the part they close keeps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 bfdb79418c Kernel rig: the flange beside the ledge graded on a volume range (the flange's two readings of its length)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 f6847c97c9 Kernel rig: the base with two adjacent flanges and a hole graded on its volume (base, bends and panels folded)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 9b4162a334 Kernel rig: the flanged rhombus graded on its volume (flat area x thickness, all four reliefs cut) and its walls' ends
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 27b7e202a8 Kernel rig: the two folded 72 degree trays graded on their volume (flat area x thickness) and the walls' reach
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 0bcc24ccd1 Kernel rig: the concave round into the peg's cylinder graded on a volume range (the torus it must add, the band it can't leave)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 49c7b982ef Kernel rig: the chamfered corner of the lipped shell graded on its volume (the chamfer's triangle through the wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 63dd6ae6f5 Kernel rig: the two 851 chamfers of 2 graded on their volume (the cone's sweep, and its union with the front edge's prism)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 4b512f69e3 Kernel rig: shell/3576 was the ladder's drafted box with rounds shelled, recipe for recipe; the ladder case grades it and carries #3576 and #3573
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00
jyvikoandClaude Opus 5.5 764719c538 Kernel rig: 391 graded on its volume (the shelled housing, sharp to rounded at the flange, less the letters' 0.6 mm deboss) and box
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 09:33:29 -04:00