Commit Graph
27 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 c070f044ab STEP import: a torus face round most of its tube is formed within one turn of it
A torus face covering most of its tube off the tube's quarter lines (an
exhaust collector's bend: 326° of the tube from −113.8°) needed a fifth
quarter along the tube, which STEP counts from the outer equator: its form
ran past a full turn of the tube and SMLib refused the solid. #8496 turns
frames about the axis only, and the torus label had no tube reference.

The torus label gets a tube start (`tube_start`, radians; 0 and left out
of the record by default, so older records mean what they did): v counts
from there, in every evaluator, form, pcurve, iso curve, tessellation,
placement, SSI and SMLib transfer. A spilling torus face's tube start moves
to where its tube begins, or a turn before where it ends, whichever puts
its tube circles on the grid of a round face they are about the axis of
(a pipe's cylinder meeting the bend); circles round the tube are labelled
from the tube start (brep::form::on_tube), so their forms and pcurves lie
on the face's quarter grid exactly. The saved-format change is one file,
crates/doc/src/format/pending/torus-tube-start.rs.

Engine assembly: COLLECTOR_EXHAUST_VER_1 now comes in as a closed solid
(refused 3 -> 2); Poppy Humanoid unchanged (4).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 21:22:11 -04:00
jyvikoandClaude Opus 5.5 f070eee2b6 brep, kernel: a face's side is read on its NURBS form (#4149)
A shell's `forward` is about the surface the face's (u, v) are on, its NURBS form when it has
one, which may run against its cylinder, cone, sphere or torus. The kernel read it against the
analytic surface, so a fillet's bore whose form runs the other way was a shaft and an M10 thread
was refused in its 8.5 mm hole. `Face::form_turns` says when the form turns the normal.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:51 -04:00
jyvikoandClaude Opus 5.5 206c53487e kernel: dead code the ports left behind, deleted
Every lib warning under --features smlib outside the files agents are editing
(assemble.rs, sweep_path.rs) pointed at code nothing calls any more:
- body: shell_nesting;
- boolean_record: of_pair and its Traced alias;
- planar_regularize: the generated-wall regularization (and its branches in the
  certified one, which was its only other path); planar_sources:
  with_shell_planar_sources;
- plane_fit: plane_through, EdgeSampler, planar_face, plane_frame (the patch is
  fill's); only loop_area is left;
- polyhedron: solve3; prism: wall_along; offset: Surf::normal;
- record: regions, region; shell_groups: groups, parents and their limits;
- splitface: side_of_point, Analytic, analytic_face, face_sides, canonical;
- spline_conv.rs, all of it (surfaces builds NURBS records); an unused import in
  tess/uv.rs.
The tests of deleted items go with them: prism's wall_along test, the shell
grouping test in body_lump_tests, and the generated-regularization assertion in
regularization_protection_tests.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:50 -04:00
jyvikoandClaude Opus 5.5 5aec7a7d1b kernel: healing through SMLib's merge of faces; the boolean retries deleted
heal: a body's faces on one surface merged and its edges on one curve joined by SMLib
(Brep::merge_faces, SmBrep::RemoveTopologicalEdgesAndVertices), the edges along its split lines
kept, with SMLib's history over the body. Its booleans already end the same way
(SmMerge::BooleanPostProcess). The truck healing is deleted with what only it did: coplanar and
collinear merges by hand, flat surfaces rebuilt as planes, and approximate edges refitted as
lines or arcs from samples. on_split_line stays; edge_points reads a record edge.

Deleted, with no port: the retries around the old boolean's failures (touching_walls,
bore_guard, tangent_cylinders, sphere_lens, tool_reseam, candidate_reach). Each re-ran a failed
boolean with a changed tool or split faces; SMLib's boolean is the one path, and a case it
fails is its defect to fix there. Their own tests go with them (the helpers' unit tests in
issue_788_tests, bore_union_tests, candidate_reach_tests, and sphere_lens' relaxed-tool test);
the #2750 lens cut's result test stays, as a boolean test, without the retry diagnostics.
Heal's tests built truck prisms and a truck spline edge: deleted.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 624f6d6da7 kernel: emboss on a cylinder builds on the schema 4 record; any pick on the wall is accepted
The emboss is built from the body's record: the wall's face loses the profiles' footprints,
each profile adds planar walls and its cap on the wall's cylinder at the new radius, and SMLib
builds the body from the finished record (assemble.rs: a record taken apart and finished again
in canonical order, pcurves from the record's routine for new uses, the record's own for kept
ones). surf_of and with_same_surface read the record's analytic surfaces; the topological
offset and draft that only the old kernel used are deleted (SMLib's offset faces and draft in
offset_backend replace them).

#3782: the saved pick had to lie on the half of the wall the sketch is tangent to (its angle
inside that face's span). The wall is every exterior cylindrical face of the body (a stepped or
interrupted cylinder is refused before), so the pick is checked on the cylinder between the
endcaps. The sleeve test's far-side pick now succeeds; a pick on the bore is still refused.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
Artem Sushchev ae2ab87b99 Cut: a body with a sealed void no longer comes out empty (#3175)
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.

In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.

The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.

Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
2026-10-20 10:30:13 +00:00
fkirill 42e991069f Fix shelling revolved barrels (#2421) (#2486)
* claim: #2421

* claim: #2421

* Fix shelling circular-meridian barrels (#2421)
2026-10-19 16:09:11 -04:00
H. Conrad dc6eca6830 Fix/shell saddle corners (#1316)
Thanks @Ian-cmd-ops.
2026-10-16 01:19:42 -04:00
Luke Kearney f0c5bfcdf2 Draft: only the faces round the drafted walls must be walls or caps (#1393)
Draft checks only the faces that share a corner with a drafted wall, so rounds and other faces elsewhere on the body no longer refuse it (#390).
2026-10-15 13:31:51 -04:00
Irakli KourtisandClaude Opus 5.5 ccc36dc1f9 fix: shell a body whose curved edge is rounded smaller than the wall (#476)
Moved in by more than its radius, a round collapses and its neighbours meet
along a new edge. That edge was always built as a straight line keyed by its
ends, so on a disc whose circular edge is rounded the four arcs where the floor
meets the side became one chord used by four faces, and the shell failed with
"This shell is not oriented and closed" (#319).

The new edge now runs where the edge's face meets the face across the round
(the round's far side, crossed as a strip), through the edge's middle moved
onto both: a line or a circular arc, checked to lie on both moved faces, and
refused otherwise. Twins are the new edges with the same ends through the same
middle.

Fixes #319

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 21:48:27 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Iraklis KourtisandClaude Opus 5.5 08d7037176 feat(kernel): modifiers report exact face and edge history
Fillets (local, loop, rolling ball, corner, variable, chord), chamfers
(cutters, local corners, loops, two sides), shell, draft, offset faces,
split face/body, delete face, patch/copy/stitch/trim/extend and
transforms record their history over [body] while they build: faces
rebuilt from the body's, blends in place of edges (corner patches in
place of the edges at the corner), shell walls as offsets, edges as
pieces of the body's or where two faces meet. Multi-step operations
compose each step. The push-face offset fallback now has history, and
the bore union composes its narrowed tool.

A reflection reorders a body's edges, so transforms now match edges by
identity (mirrored copies reported the wrong edges).

Refs #136

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
Iraklis KourtisandClaude Opus 5.5 a3ff816176 fix(kernel): name the zero-thickness rim when a shell can't open beside a round (#316)
Shelling a body through a face that a convex round meets tangentially, with
the round at least as large as the thickness, puts the cavity wall through
the rim where the round meets the open face. Both shell strategies then fail
and the first one's generic error ("a corner whose faces don't meet the same
way after the move") was reported. The shell now says why and what to change.
Successful shells are unchanged.

Found by fuzz seed 33, which reaches this case now that a disc's two edges can
be rounded to half its thickness.


Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:44:27 -04:00
CypherNaugh_0x 3573b96c7a fix: shell bodies where four or more planar faces meet at a corner (a floor falling to a drain from the trough edges) by splitting such corners into several joined by short edges instead of refusing because the moved planes miss a common point 2026-10-11 12:23:23 +02:00
CypherNaugh_0x 9508ee749c Shell refuses a wall thicker than a rim instead of returning a corrupt body: the topology-preserving face offset now checks every planar face's moved loops, and a loop that turns inside out or two loops that cross (a rim or ledge narrower than the move, e.g. a bowl opening sliding past the slab's outer edge) is an error naming the spot. Before, the self-crossing cavity went into the boolean and the shelled body came back with roughly twice its volume and its centre of mass outside the body, so every later cut failed its volume check
The check is geometric, not a tuned threshold: on the reported basin (18 mm rim, sloped bowl wall) the rim strip reaches zero width at 15.17 mm and the shell is refused from there on. Tolerances only absorb rounding (scaled to the body size), and at most 2000 straight edges per face are compared pairwise. Arc edges and curved faces are not checked.

This is a guard, not the full fix. Building such a shell needs the offset to change topology: drop the strip that collapses and let its neighbours meet, as offset_body already does for rounds thinner than the move, extended to planar faces. That is substantially more work in the most delicate part of the kernel (rims, ledges, steps, arc-bounded strips) and is left for a separate change; until then the workaround is to model the hollow directly (an offset loft and a box cut).
2026-10-10 12:32:03 -04:00
bherbruckandClaude Opus 5.5 67c79ec91c Lips on rounded, shelled rims: the band along the rim's edge is raised from the body's own faces (kernel::raise_band: the rim face split along the band's exact offset edge, the band's walls swept up from the walls below, a top), since a join can't merge walls that continue each other; grooves cut with a band reaching into the free side so no wall coincides; tests against the band's area times its height
Fixes #29

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-10 00:04:37 +00:00
bherbruckandClaude Opus 5.5 d7f9f0a516 Shell of rounded parts (the first tutorial): a round thinner than the shell collapses to a sharp inner edge (as in Fusion) instead of failing; when an open face's tangent round can't follow it out, every face moves in and the opening is the open face's copy swept out through the body; spindle tori (a bottom round running round a rounded corner) are taken by the offset; shells after a drilled hole; engine tests against the analytic volumes (box with rounded vertical edges and bottom loop, the tutorial plate at 2 mm and 1.5 mm)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruckandClaude Opus 5.5 1bf377c14b No panics in the boolean's final assembly (the web build aborts on any panic: the Plastic Enclosure sample panicked 8 times and crashed the browser's start page); face pushes check their result and fall back to the general offset (a boss standing on a plate joins again with off-axis cylinder seams); offset errors name the face they can't move; docs/robustness.md with the before and after rates; caught panics counted per design in the robustness runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruckandClaude Opus 5.5 ccde7a4837 Robustness runs and the kernel fixes they found
- solvecraft-cli fuzz / fuzz-one: seeded random modelling sessions (boxes, extruded profiles with arcs, revolves; joins and cuts of boxes, cylinders and spheres, fillets, chamfers, shells, holes, patterns) on a grid that makes coincident faces and tangencies common, every step checked (command ok, every body a sound solid via the new Body::validity, volume moving the right way), plus the boolean volume identity on random primitives; one process per seed with a time limit; failures minimised to scripts
- shell/offset: corners where a curved face meets another at an angle are refined onto the moved surfaces (Newton); edges that are neither lines nor arcs are rebuilt through their moved points; one shell per piece; faces that would cross say so (not supported yet) instead of leaving a cavity inside out; flat revolved faces count as planes; the unhealed body is tried when the healed one fails
- cylinders start their seams at an odd angle (grid-aligned seams broke booleans along them)
- partial revolves of profiles touching the axis build no zero-area face on the axis
- booleans on bodies in several pieces retry a piece at a time
- regression tests for each, and a fixed set of seeds in cargo test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruckandClaude Opus 5.5 141f3acc85 Split pieces stay separate faces: Measure counts them apart and Offset Face moves only the picked piece
The merged face count no longer joins faces across a Split Face line, and Offset Face's same-surface grouping stops there. A piece whose move the body's topology cannot follow (its neighbour stays put) is swept along its normal and joined on or cut in, giving walls along the split line as in Fusion. Engine test: a split box top counts 7 faces; one half up 5 (27000 mm³), the other down 3 (25200 mm³).

Fixes #12

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-09 23:31:52 +00:00
bherbruckandClaude Opus 5.5 846bb112e2 Construction axes, points and planes from model geometry (SOLID ▸ CONSTRUCT): axes through a cylinder/cone/torus, perpendicular to a face at a point, through two planes, two points or an edge; points at a vertex, through two edges, three planes, at the centre of a circle/sphere/torus, at an edge and a plane, along a path; midplane, planes through two edges or three points, tangent to a face, along a path. References (doc::construct::GeoRef) keep picked faces and edges by persistent name and resolve on each evaluation (they follow the model); results live in ModelState.construct, in the component's frame; view::construction_axes/points/planes for the viewport; kernel::face_surface for a face's analytic surface
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-09 12:47:56 +00:00
bherbruckandClaude Opus 5.5 3db6119cc6 Delete Face (face.delete, and faces in the Delete selection): a timeline feature that removes faces and heals the gap from the neighbouring planes through kernel::delete_faces; a picked face brings the rest of its surface (both halves of a hole's wall); face picks are stored by persistent name; a face its neighbours can't close is refused with the kernel's reason
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-09 12:47:56 +00:00
bherbruckandClaude Opus 5.5 0670de3f57 Shell and Offset Face on drill tips and tori: samples skip points where the normal is undefined (a cone's apex), the apex moves with its cone, tori offset their tube (the tube circle scaled and revolved again); a box with a drilled hole now shells to its analytic volume
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 17:10:06 +00:00
bherbruckandClaude Opus 5.5 06186be555 Press Pull on a fillet's or chamfer's face edits that feature's size by the distance (found through the face's persistent name); on another curved face it offsets the face, with the rest of its surface (both halves of a hole's wall)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 13:39:34 +00:00
bherbruckandClaude Opus 5.5 0ee343b9e6 Shell and offset faces on cones and spheres too (a dome moves to a smaller sphere about its centre, a cone's apex slides along its axis); surface fitting robust to poles and half cylinders; a shell retries on the unhealed body when the healed one won't cut
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 12:59:50 +00:00
bherbruckandClaude Opus 5.5 7e373ff1f7 Draft of walls between caps on non-convex bodies: planes tilt about their neutral-plane line, cylinders become cones (47: drafted round-ended pocket)
Oracle: 56/76.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 03:35:18 +00:00
bherbruckandClaude Opus 5.5 59685a9180 Shell and offset faces on bodies of planes and cylinders (filleted boxes, bosses: each face moves along its normal, cylinders change radius, corners and arcs follow); surface classification leaves out singular points (cone apexes); recipes: holes on cylinders drill toward the axis
Oracle: 55/76 (67-76 sheet metal not replayed yet).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 03:25:21 +00:00