Commit Graph
10 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 30ceb44e6d Tests: SMLib's faces, one per swept segment, closed along a seam, replace truck's halves
Truck split what it swept: a big arc into two faces, a full circle into halves, a turn into
two or three parts, a sphere into six patches, a torus into six; it numbered boxes' faces in its
own order and sewed stepped cuts slab by slab. SMLib sweeps each profile segment into one face,
closes a full cylinder, sphere or torus along one seam edge, and cuts without slabs. The record,
face source, helix, display mesh, measure and boolean history tests still expected truck's
pieces. Each expectation now follows the geometry, checked by the tests' own independent
measures: every face's origin against the profile segment its mesh lies over (unchanged),
faces picked by where they lie instead of by truck's face numbers, and the merged counts by the
kernel-cases ladder's rule (each whole curve once, and each cylinder's seam): a cylinder 3
faces, 3 edges, 2 vertices; a ball cut from a slab 7, 14, 10. The truck-only stepped-prism
check (walls coalesced across slabs) becomes the property it stood for: the stock's walls stay
whole, one face each, Kept.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:20:38 -04:00
jyvikoandClaude Opus 5.5 d91d3f2a67 Kernel: a body moved by a non-rigid matrix keeps each face's source and paint on that face
transform_matrix moves a body by a matrix that is not a rigid motion through SMLib, which
numbers the moved body's faces afresh, then attached the input's face sources and paint in the
input's face order. Planar certificates landed on the wrong faces (a reflected, sheared plate's
hole walls and caps no longer lay on their certified planes). Each moved face now takes the
source and paint of the face its history names; a face with no known origin takes no source,
and with no history at all the paint stays as it was.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 db9cf693a5 Kernel: an extrusion's cap is in its own plane however thin the extrusion
The roles of a swept body's faces take a face as a cap when all its points lie within a
flatness tolerance of the start or end plane, sized to the body (1e-5 of it). A box 0.1 µm
thick in a 14 mm body is thinner than that, so each cap lay in both planes and box_solid
refused "box role correspondence" (engine component_clone
boundary_material_proof_requires_resolvable_stock_and_void). Between parallel start and end
planes the tolerance stays under a quarter of their gap; a cap's points lie on its plane to
the evaluation's precision. Regression case: a 10 x 10 x 1e-4 box in
box_certificates_are_six_construction_roles...

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 1cb713c966 Kernel: an extrusion's wall seed marks only the edges nearest it
Each wall of a swept body is known by a seed on its piece's edge in the start plane; every
start-plane edge within `near` of a seed took its piece, `near` sized to the body
(3 x 2e-4 of its size). On a side shorter than that the neighbours' edges are near too: a
0.3 mm wall of a 1 m label is 0.15 mm from them, near 0.65 mm, so the long walls got two
pieces, had no source, and box_solid refused "box role correspondence" (gpu depth
at_ten_metres..., engine component_clone boundary_material_proof); a ring of radii 10 and
9.999 lost its side certificates (ui configuration_annulus_picker...). A seed now marks only
the edges nearest it (within the flatness tolerance of the nearest), still within `near`.
Regression case: a 1000 x 0.3 x 400 box in box_certificates_are_six_construction_roles...

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 12:07:50 -04:00
jyvikoandClaude Opus 5.5 42997a62ed WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:47 -04:00
Artem Sushchev 30b01e8d79 A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182) 2026-10-23 22:53:42 +00:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruck ef8f6ca6f9 fix: restore shell and cut wall topology in 0.2.1 2026-10-11 15:17:05 -04:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck c1d819f235 feat: preserve body history and placed modelling workflows
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.

Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.

Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
2026-10-11 03:59:12 -04:00