Commit Graph
980 Commits
Author SHA1 Message Date
leValdemar19andClaude Opus 5.5 52e496d017 Sketch Symmetry: centre a line between two fixed lines (#1796) (#3895)
* claim: #1796

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Sketch Symmetry: centre a line between a face's edges (#1796)

Symmetry of two edges of a face (its projected outline, whose sides run
in opposite directions) about a construction line between them was
refused with "neither entity can move". The pairing of the line ends by
mirror image landed on main in #3029; this keeps the tool side and the
tests for #1796:

- The Symmetry tool and a three-line preselection take the only
  construction line or centerline as the symmetry line, whatever the
  pick order (picking it first used to mirror it out past the other
  line). Two points and a line take the line. Otherwise the last pick,
  as before.
- Tests: fixed lines drawn the opposite way, pairs by mirror image (a V,
  end to end along the axis), every pick order, a three-line
  preselection, and a scenario clicking a face's edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:49:54 +00:00
DuBearteandClaude Opus 5.5 a5f7f5a921 Batch: consecutive parameter edits can rebuild the design once (#5822) (#5839)
* claim: #5822

* Batch: consecutive parameter edits can rebuild the design once (#5822)

An agent's batch of parameter edits, one parameter per step, evaluated the
design once per edit: an edit early in the timeline rebuilds nearly all of
it, and 21 such edits ran for minutes.

engine.batch and the MCP batch tool take coalesce_parameters (default
false). With it, each run of consecutive plain parameter edits
(parameters.change with only a name and an expression, or with changes) is
set as one parameters.change {changes}: one rebuild for the run. Any other
step ends a run, so later steps see the design up to date. Every step
still gets its own result (coalesced: the run's length); the run is one
undo step. A run whose combined edit is refused (a new parameter, which
changes can't make; a bad expression) runs step by step, so a refused edit
is still named by its own step. The app's off-thread evaluation computes
the run the same way. The grouping is solidcraft_engine::batch_params,
shared by both runners.

21 parameter edits on a plate with 21 extruded bosses (in-process MCP,
ci profile): 40.1 s step by step, 3.5 s coalesced, the same volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Batch coalescing: say a run skips the states between its edits; test it against step by step (#5822)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:31 +00:00
JIJINBEIandClaude Opus 5.5 cdde7d62b2 Persistent names read by one parser; four misreadings fixed (#5814) (#5966)
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first

`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.

joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where

`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: read what made a face, its kind and its feature ids through persistent_name

The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.

- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
  taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).

Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* names: an edge holds one face or more; made_by reads only the leading token

An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* persistent_name: split into lexer, parser, write, text and tests

No code changed; callers' paths stay the same (`pub use text::*`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:48:26 +00:00
raykholo 89a4a96630 Ribbon: an active contextual tab looks selected (#4230) (#4242)
* claim: #4230

* Ribbon: an active contextual tab looks selected (#4230)

Contextual tabs (Sketch while editing, Sheet Metal for a sheet body) chose
their solid accent fill before checking whether they were active, so
selected and unselected looked the same.

The selected contextual tab keeps the solid accent pill. An unselected one
now looks like any unselected tab with its accent as an outline, so it still
marks the context without outshining the tab that is selected. Ordinary tabs
are unchanged.
2026-10-25 01:26:47 +00:00
raykholo 34d1ac0376 A straight 3D sketch line can be picked as an axis (#4363) (#4381)
* claim: #4363

* A straight 3D sketch line can be picked as an axis (#4363)

3D sketch wires were always offered as curved, and axis inputs resolved
only 2D sketch lines, so a straight 3D line couldn't be an axis (Plane at
Angle and others). A single-segment wire is now offered as straight and
resolves to its endpoints in model space; splines are still refused.
2026-10-25 01:26:44 +00:00
Thodoris Tsagkogeorgas 0e9e175e79 Two-sided sketch offset shows both distances in the sketch (#4385) (#4386)
A two-sided offset drew only the Distance dimension. Distance 2 now gets
its own value box and arrow, the other way from Distance.
2026-10-25 01:26:41 +00:00
rlartotandClaude Sonnet 5.5 f11ad0ce28 Ribbon tooltips: written help for six more tools (#2758) (#4592)
Combine, Loft, Mirror, Circular pattern, Rectangular pattern and Sweep get the
same two-sentence help as the first six (en, fr, ja, zh). Text only.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:26:33 +00:00
neosandeep24 9ad96fb81b Home: keep a removed recent design removed (#4660) (#4718)
Removing a design from the Start page's recent list only changed memory, and on the web sync_recents() rebuilt the list from stored designs on each launch, adding it back. Track removed designs in a persisted 'forgotten' set that sync_recents honours; opening or saving a design, or deleting/renaming its file, clears it.
2026-10-25 01:26:31 +00:00
HerperlerpicusandClaude Opus 5.5 b671265faa Viewport: show the running tool's icon beside the pointer (#4869) (#4870)
* Viewport: show the running tool's icon beside the pointer

While an interactive tool or a command's dialog runs, its toolbar icon
rides above and right of the pointer in the viewport, so the next click's
command is visible without looking up at the ribbon. It sits clear of the
system arrow and of the sketch tools' coordinate readout below the
pointer, moves left at the right edge and below the readout at the top.

It shows only where a click reaches the model: not over panels, dialogs,
menus or the navigation bar, and not while the camera moves. The icon is
the command's own (the one the ribbon and the dialog header show), so
there is no new artwork. On by default; "Show tool at cursor" in View
settings (`ui.set {"toolCursor": false}`) turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Viewport: the tool at the cursor is off by default

As asked in review: the badge starts off, and "Show tool at cursor" in
View settings (or `ui.set {"toolCursor": true}`) turns it on. The test
checks the default and turns it on through the View settings checkbox.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:26:27 +00:00
Reefwalker 832ff941d1 Edit Text: explain failed bold previews immediately (#5004) (#5155)
* claim: #5004

* fix: explain failed sketch text previews immediately (#5004)
2026-10-25 01:26:23 +00:00
raykholo 9869997733 Sketch Create menu: line, rectangle, and other families show their icons (#5244) (#5279)
* claim: #5244

* Sketch Create menu: family rows show their icons

The Line, Rectangle, Circle, Arc, Slot, Polygon, and Spline entries in a
sketch's Create drop-down were drawn as plain text buttons. Draw each as
the shared menu row with its first variant's icon and a submenu arrow,
keeping the same popup handling for its variants.
2026-10-25 01:26:20 +00:00
raykholo 745a24bbc8 Sketch: undo while drawing a spline removes the last point, not the sketch (#5304) (#5441)
* claim: #5304

* Sketch: undo and Backspace remove the last pending spline point (#5304)

While a spline tool has points placed, Cmd/Ctrl+Z and Backspace take back
the last point instead of undoing sketch history or deleting the selection.
Undo reaches sketch history again once no spline points remain.
2026-10-25 01:26:15 +00:00
raykholo 26340882c0 Mirror keeps the preselected feature when the object type changes (#5288) (#5453)
* claim: #5288

* Mirror keeps the preselected feature when the object type changes (#5288)

The pre-selection moves into the objects input when a pattern window
opens, and switching Object Type cleared that input, so switching to
Bodies and back lost the selected feature. The window now keeps the
objects of the type not shown and restores them when it is chosen
again. A plain timeline click on a feature already picked keeps it;
Ctrl+click takes it out.
2026-10-25 01:26:13 +00:00
raykholo 8e2b8f2ace Floating history: the last done feature is no longer drawn as selected (#5415) (#5455)
* claim: #5415

* Floating history: the last done feature is no longer drawn as selected (#5415)

The floating history strip passed the last feature before the marker to
HistoryChip as selected, so it looked selected with nothing selected.
Pass only the real selection, and mark the last done feature with a small
tab-accent dot under its chip instead.
2026-10-25 01:26:10 +00:00
ISHII YUKI 34e75979b2 Agent chat: hand WSL paths to agents started through wsl.exe (#5546) (#5549)
* claim: #5546

* Agent chat: hand WSL paths to agents started through wsl.exe (#5546)

An ACP agent started through wsl.exe was handed the session's working
folder and the solidcraft-app bridge's command as Windows paths, which it
can't use: the Claude adapter refuses the session, and the bridge never
starts. When the agent's program is wsl or wsl.exe, convert both to their
WSL form (C:\Users\... -> /mnt/c/Users/...) before session/new, in the
chat and in the Test button. The bridge still runs on Windows and reaches
the app at 127.0.0.1.
2026-10-25 01:26:05 +00:00
N3MI-DGandClaude Opus 5 d5eca6cc78 3D mouse: let the overall speed slider reach the 5x the engine allows (#5704)
The Preferences > Navigation overall speed slider stopped at 3.00x, but
`space_mouse::frame` clamps the applied speed to 0.1..=5.0, so the top of
the range the engine honours could not be reached from the UI. Raise the
slider's ceiling to 5.0x to match that clamp; the step, format and lower
bound are unchanged.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-25 01:25:58 +00:00
rlartotandClaude Sonnet 5.5 77c77829e3 Preferences: Z up orientation figure is drawn right-handed (#5680) (#5741)
* claim: #5680

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Preferences: draw the Z up orientation figure right-handed (#5680)

Z up showed Y pointing toward the viewer on the left, a mirrored
(left-handed) figure. Y now points away on the right, like the axis
gizmo. The axis tips move into orientation_axes and a test checks that
X to Y and Y to Z turn counter-clockwise in both figures.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:55 +00:00
Colin Faulkingham f01ef3c6aa Keep the Parameters window height stable when moved (#5078) (#5752)
* claim: #5078

* Keep the Parameters window height stable when moved (#5078)
2026-10-25 01:25:53 +00:00
rlartotandClaude Sonnet 5.5 f5a6c8fa51 Link the version number to its release notes (#5488) (#5765)
* claim: #5488

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Link the version number in the title bar to its release notes (#5488)

The version at the right of the title bar opens the release page of this
build (v<version>, which exists for stable, candidate and nightly
releases) in the browser; a development build opens the release history.
Its click area stops at the report button, which the long version
strings of candidates and nightlies overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:51 +00:00
rlartotandClaude Sonnet 5.5 865575e410 Hem: the handle runs along the hem to its tip (#5828) (#5844)
* claim: #5828

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Hem: the handle runs along the hem to its tip (#5828)

The hem's on-canvas handle started on the picked edge and pointed square
to the sheet (#4794 only flipped it), so it neither sat on the hem nor
moved the way the Length grows. Length is measured from the outer face
of the fold to the tip, so the handle now starts on the centre line of
the hem layer at that face and points along the hem toward the tip.

The test builds the hem for both Flip states and checks the handle's
direction, its start on the layer's centre line, and that start plus
Length lands on the built tip. It replaces the arrow-side test of #4836,
whose rule (the arrow points to the side the hem builds on) no longer
applies.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-25 01:25:49 +00:00
HiroKenEzandClaude Opus 5.5 992c93fe5b Find in Timeline scrolls both timeline layouts to the found feature (#5850) (#5863)
* claim: #5850

* Find in Timeline scrolls both timeline layouts to the found feature (#5850)

Find in Timeline selected the feature but neither the bottom History strip
nor the history on the left scrolled to it. The handler now leaves a one-shot
reveal request (TreeState::timeline_reveal); whichever layout draws its items
next scrolls the found item into the middle of its scroll area and drops it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:44 +00:00
raykholo 0343960bd6 Ignore middle-click clipboard paste during navigation (#5855) (#5924)
* claim: #5855

* Ignore middle-click clipboard paste during navigation (#5855)

Firefox on Linux sends a primary-selection paste event when the middle
button orbits or pans. Paste events on frames where the middle button is
pressed, held, or released no longer reach the design; Ctrl/Cmd+V still
pastes.
2026-10-25 01:25:40 +00:00
DuBearteandClaude Opus 5.5 1d48707d0c Drive Joints: a Show ghost checkbox (#5905) (#5955)
* claim: #5905

* Drive Joints: a Show ghost checkbox (#5905)

Driving a joint draws the moved parts' old place as a translucent ghost,
which gets in the way when driving joints over and over. Drive Joints has
a Show ghost box under its value rows: on by default (nothing changes),
off draws only the moved parts at their new place. The stopped-short
warning stays. The choice is a preference (drive_joints_ghost), so it is
remembered between uses; it affects Drive Joints only.

The preview's Colors carry the choice (ghost), so toggling it recomputes
the preview (its key hashes the colours) and world_preview leaves the
ghost out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:38 +00:00
DuBearteandClaude Opus 5.5 443baa41f0 Design tabs: the tooltip says where the file is saved (#5868) (#5974)
* claim: #5868

* Design tabs: the tooltip says where the file is saved (#5868)

Hovering a design tab showed the design's name, the same text as the tab.
The tooltip now says where the file is saved, with a path in the home
folder shortened to ~/ (home::friendly_path, as the start page does), or
"Not saved yet" for a design never saved. When the tab is too narrow for
its name, the full name comes first, then the place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:36 +00:00
Colin Faulkingham d366b8922a Keep the main sketch tool unchanged when a pinned tool starts (#4023) (#6013)
* claim: #4023

* fix(ui): preserve sketch family choices when starting pinned tools
2026-10-25 01:25:33 +00:00
Colin Faulkingham 692265980b Identify commands beside the animated agent cursor (#622) (#6026)
* claim: #622

* fix(ui): identify commands during agent cursor animation
2026-10-25 01:25:31 +00:00
Colin Faulkingham 28fe5fdb43 Extrude: accept manually selected target planes (#4974) (#6030)
* claim: #4974

* fix(ui): accept manual extrude plane targets (#4974)
2026-10-25 01:25:29 +00:00
semmelrindeandClaude Opus 5.5 26c9d1c445 View toolbar: the Look At tooltip names its shortcut, Ctrl+8 (#2476) (#6071)
Look At already has a key (Ctrl+8, Cmd+8 on a Mac), but the button's
tooltip didn't say so, as Fit's does (F6).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:24 +00:00
semmelrindeandClaude Opus 5.5 f157f5489f test: the desktop-PATH agent probe waits long enough on a loaded machine (#6072)
desktop_path_can_start_an_agent_and_its_runtime gave the version probe
3 s and the first reply 5 s. Under a full test run on a loaded macOS
machine the probe came back empty (version None, twice in a row), while
the test alone passes in 0.4 s. Both limits are now 20 s; a working
agent still answers at once, so the test takes no longer.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:22 +00:00
semmelrindeandClaude Opus 5.5 d1ec8dfd5a Agent chat: a Mammouth AI preset for OpenAI-compatible endpoints (#5815) (#6082)
* Agent chat: a Mammouth AI preset for OpenAI-compatible endpoints (#5815)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat: the key test names the Mammouth AI URL too (#5815)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:19 +00:00
semmelrindeandClaude Opus 5.5 08d094db39 Shell: an empty Thickness makes no command, so OK waits for one (#960) (#6085)
With the Thickness box cleared, the dialog sent thickness: "" and the
command refused it ("`thickness` must be a number or an expression"),
shown as a red error with Create Issue. The dialog now makes no command
until a thickness is entered.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:17 +00:00
Colin Faulkingham 1f93b6d39c Joint: use the picked straight edge as the motion axis (#5457) (#6086)
* claim: #5457

* fix: align new straight-edge joint snaps with the edge (#5457)
2026-10-25 01:25:14 +00:00
semmelrindeandClaude Opus 5.5 0477e0ba4e Shell: the dialog sends the picked face's body (#4555) (#6092)
Where a body's face lies flush with another body's face, the face point
alone could resolve to the other body, and Shell then refused with
"select at least one face to remove". The dialog now passes the body of
the picked faces, as the command already accepts.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:12 +00:00
semmelrindeandClaude Opus 5.5 ae7176cc86 Extrude: a face picked under a picked profile is extruded too (#3926) (#6099)
With a sketch profile and a body face picked together, OK ran the
profile's extrude first and then looked the face up by its point. Where
the profile's extrude covered the face, it was gone: "no face of Body1
at face". A new extrude now runs its face picks first; an edit still
rebuilds the profile's extrude first.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:09 +00:00
semmelrindeandClaude Opus 5.5 eef9a68809 Dialogs: a missing pick on OK is guidance, without Create Issue (#3292) (#6101)
Plane at Angle's OK with an empty Plane or Axis input showed "select a
plane first" or "pick an axis" as a red error with a Create Issue
button, and people filed it as a bug (#3292, #3773). A refusal that only
names what to pick is now shown as a plain hint, with no issue button,
in every dialog (Sketch Modify dialogs already hid it).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:25:06 +00:00
Colin Faulkingham f06875128b Preserve the history marker when switching sketch editors (#5435) (#6103)
* claim: #5435

* fix(ui): preserve history when switching sketch editors
2026-10-25 01:25:04 +00:00
Colin Faulkingham 7a1f903216 Close the File menu with Escape (#6126) (#6132)
* claim: #6126

* fix: close File menu on Escape (#6126)
2026-10-25 01:25:00 +00:00
DuBearteandClaude Opus 5.5 67adf5abb5 Preferences: the theme strip shows arrows where more themes are (#6161) (#6167)
* claim: #6161

* Preferences: the theme strip shows arrows where more themes are (#6161)

The strip scrolls sideways with a hidden scrollbar, so nothing showed that
more themes were past its end. An end with themes past it now shows a
chevron button over the tiles there; a click scrolls most of a page.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:54 +00:00
Dahak BuildsandDahak Builds adbd2adf89 view.pick: map screenshot pixels to exact geometry (#6304) (#6329)
* claim: #6304

* view.pick: map screenshot pixels to exact geometry (#6304)

A read-only command that answers, for screenshot pixels (window or model
frame) or world-space rays: body, face index, exact world point and
outward normal, depth, occurrence/component for placed parts, and the
nearest edge/vertex within edge_px. Faces are raycast through the same
per-body pick index the mouse uses; flat faces are solved exactly
against their plane, curved faces take the mesh hit with the normal
interpolated from the mesh's surface normals. Section-aware: faces on
the removed side do not stop a pick and the cut cap answers with
section_cap. Never touches the selection, camera, document or undo.

Exposed as control ui.pick and as view.pick through engine.execute and
engine.batch (and through them MCP execute and batch).

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-25 01:24:39 +00:00
Dahak BuildsandDahak Builds 96303873fe Sketch: right-click toggle between driving and driven dimensions (#320) (#6357)
* claim: #320

* Sketch: toggle a selected dimension between driving and driven (#320)

A selected sketch dimension now offers 'Toggle Driven Dimension' in the
viewport right-click menu, running the existing engine command
sketch.toggle_driven. The over-constrain -> driven placement half landed
in #366; this exposes the engine's toggle in the UI, the remaining gap
from the retest notes on #320.

- context_menu: sketch_entity_items collects selected SketchConstraint
  ids that are dimensions (kind.value() is Some) and, for a single
  selected dimension, prepends the toggle item aimed at that constraint.
  Non-dimension constraints and plain entities get no item.
- Label reuses the existing catalog entry cmd.sketch_toggle_driven, so
  every locale translates it with no catalog change.
- Test: the menu offers the item for a selected dimension, running it
  round-trips driving -> driven -> driving, and a horizontal constraint
  or a plain curve gets no item.

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-25 01:24:36 +00:00
NOWN-DEVandClaude Opus 5.5 b925a1af3d Configurations: a long table builds only the rows on screen (#6366)
* Test: a long configuration table builds the cells of the rows on screen

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Configurations: the table builds the rows on screen and its cells once per change

A table of hundreds of configurations was slow to open and to use: every frame cloned the
whole config.table answer, rebuilt every cell's text, looked each parameter's unit up once
per cell and built an editor for every cell of every row, on screen or not.

The answer and its cells (with units, looked up once per column) are now kept per design
revision, and rows off screen keep their space without building their cells, as the
parameters table already does. A row with an edit in progress stays live, so leaving its
cell still commits the edit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:24:33 +00:00
N3MI-DGandClaude Opus 5 32ad6e0832 Command search: the closed field draws with the ribbon, under system windows (#5804)
The ribbon's command-search field had its own area at `Order::Foreground`, so
it painted above every system window: a Preferences card moved under the top
right corner showed the search field floating on top of it, while the rest of
the ribbon went under the card as it should.

Closed, the field is ribbon chrome and now draws at `Order::Background` with
the rest of the ribbon; open (or animating open or shut), it keeps
`Order::Foreground` so the results sheet still floats over every window.

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
2026-10-25 01:17:30 +00:00
4b119dd471 Performance overlay: frame-time graph and histogram, triangles, draw calls (#2548) (#2549)
* Performance overlay: frame-time graph and histogram, triangles, draw calls (#2548)

Net change of the perf-overlay branch, rebased onto main as one commit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Document frame_rate_details in ui.prefs

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-24 22:50:43 +00:00
raykholo 4cd1a51f48 Assistant: a request timeout per endpoint for slow models (#5009) (#5010)
* claim: #5009

* Assistant: a request timeout per endpoint for slow models (#5009)

An OpenAI-compatible endpoint now stores how long one model request may
take (request_timeout_s, 300 s by default, clamped to 30 s ..= 1 h). It
is set in the Add agent dialog and in the endpoint's entry under Agents
(a running conversation uses a change from its next request), through
ui.agent_chat add_agent, and reported in the chat's state. A request
that runs out of time says the limit and where to raise it instead of
"timeout: global". The desktop HTTP cap goes from 900 s to an hour.

The tool-call timeout stays 330 s: it covers SolidCraft's own tool work
and the user's Allow, never the model.

* Assistant settings: line up an endpoint's Request timeout with Permissions

The label column of an agent's entry is wide enough for "Request timeout",
so the label isn't cut and both rows share one column.
2026-10-24 22:24:42 +00:00
raykholo 88f079bd8c Timeline: the tooltip hint is translated (Part of #4370) (#4398)
* claim: #4370

* Timeline: the tooltip hint is translated (Part of #4370)
2026-10-24 22:12:28 +00:00
imanu86 dbdeeec2e9 Undo restores what a hide put away (#2219) (#4780)
* Undo: what is hidden lives in the snapshot, so hiding is a step (#2219)

`Session::execute` records a step only when the document `Arc` changes, and what is
hidden lives in `Session::visibility` — saved with the design, but outside the
document. `browser.visibility` was also declared `.noundo()`, and `Snapshot` had no
field for it, so even a recorded step could not put a hidden body back: undo went to
the command before the hide and left it hidden (#2219).

`Snapshot` and `Checkpoint` now carry the `Visibility`, `go_to` restores it, and
`Session::execute` treats a visibility change as a change of its own. That change is
display-only, so it refreshes the view with a revision bump (`refresh_display`)
instead of evaluating a model a hide does not touch.

The command also takes `folder: "all"` (every body, sketch, construction item, origin
item and joint, plus the browser folders and occurrence hides) so Show All can be one
step, and asking for the state an item already has no longer reorders the hidden
lists: a redundant hide is not a step and leaves no unsaved changes.

* Show/Hide: the menus run browser.visibility, so the history has it (#2219)

The hide and show actions wrote `session.visibility` directly instead of running the
command: the body and face menus (`ui.hide` / `ui.show`), the `V` key
(`context_menu::toggle_visibility`), the browser rows' eyes, the Origin rows and
`ui.originAll` / `ui.originPart`. The engine could record a step and there was
nothing to record — which is why the release still answered "nothing to undo" after
hiding from the Browser.

They all run `browser.visibility` now (the repo rule that the UI acts through
commands), and `ui.showAll` is that one `folder: "all"` call, so Show All is one undo
step rather than three. `docs/occurrence-workflows.md` says what visibility does in
the history.
2026-10-24 22:12:17 +00:00
raykholo 0b91ff8a34 Measure picks projected and intersection sketch curves (#4337) (#4427)
* claim: #4337

* Measure picks projected and intersection sketch curves (#4337)

Dialog inputs turned away every curve or point of a sketch that is not the
active one, which includes projected and intersection curves, so Measure
took the nearest item it did accept instead. Give Measure explicit
acceptance for these references, keep the source sketch on a click, and
accept them from a pre-selection and a box selection. Other inputs keep
their restrictions.
2026-10-24 22:05:58 +00:00
raykholo 1e81e65e7e Browser tree hover stays fast on a nested STEP assembly (#3892) (#3894)
* claim: #3892

* Browser tree hover stays fast on a nested STEP assembly (#3892)

Hovering a placement row lit its whole subtree by walking it again
(Session::occurrence_bodies) on every frame, and opening a STEP file
makes its top placement active, so every highlight rebuild walked the
whole assembly again for the active placement's bodies. On a nested
assembly each walk resolves every placement below it, which cost
0.5 s or more per walk.

- Session::occurrence_bodies remembers its answers per placement until
  the document, the evaluated model or the pending moves change
  (occurrence_bodies_shared hands out the shared list).
- The highlight looks hovered bodies and faces up by name instead of
  scanning the hovered list once per body.
2026-10-24 21:59:55 +00:00
N3MI-DGandClaude Opus 5.5 582e6097be Find in Browser finds the body; Find in Timeline opens the feature's folders (#3883) (#3884)
* claim: #3883

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Find in Browser finds the body; Find in Timeline opens the feature's folders (#3883)

A right-click on a body in the viewport picks a face, and the face menu's
Find in Browser selected the face's creating feature in the Features folder
instead of the body. It now reveals and selects the body, as the edge and
body menus already did.

Find in Timeline now opens any collapsed history folders around the feature,
and opens the Browser's Features folder for the picked occurrence, scrolled
to the feature (the reveal formerly behind Find in Browser).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Find in Browser opens collapsed rows above the body and finds later placements (#3883)

Open the document, placement, Bodies and group rows when the command runs, not while the
Bodies folder is drawn, so a collapsed ancestor no longer hides the body. Match the scroll
target by the placed body's world name, and fix the group row key ({scope}/g{id}).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Find in Browser picks the body's own placement; Find in Timeline leaves the Browser alone from rows (#3883)

Every component's first placement keeps the definition's body name, so the root placement
matched before the body's own one and Find in Browser on a first copy opened nothing above it:
the placement must belong to the body's component too.

Find in Timeline from a sketch, construction plane or feature row has no body to say which copy
was meant, so it opened the Features folder of whichever placement came first (the other copy),
or one that never lists sketches. From those rows it now only reveals the feature in the
History; from a face, edge or body it still opens that body's copy's Features folder.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 21:53:27 +00:00
leValdemar19andClaude Opus 5.5 f7b08ab8c4 Dimension values: #name = value defines a parameter too (#2371) (#4212)
* claim: #2371

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

* Dimension values: `#name = value` defines a parameter too (#2371)

`#width = 40` in a dimension's value now works like `width = 40` (#2916):
it adds the user parameter `width` and dimensions with it. On `main` the
`#` made it an ordinary expression that failed to parse.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 21:53:16 +00:00