4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d7bbf09e0 jyviko: Issue 1080 tests: the rib's rounds and the mitred corner chamfers and rounds have their exact volumes
- 0e51ffbff jyviko: Engine tests: lip_after_boss checks each lip's and groove's exact band, hole_as_deep_as_the_plate each hole's exact bore
- e03c72a3e jyviko: Robustness tests: lip_after_boss and hole_as_deep_as_the_plate live once, in the engine's tests.rs with exact volumes
- 321e56724 jyviko: Engine tests: loft_cut goes; loft_spacing's hollow elbow covers its section counts and more
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- cdff4ac7c jyviko: engine tests: probes ask for the exact point class
- 7ca072ec6 jyviko: ui, cli tests: probes ask for the exact point class
- a85d22e60 jyviko: kernel: Body::contains, the mesh test, is gone
- baf51b271 jyviko: kernel tests: the rim chamfers running off their rims build, on SMLib 737c392
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 6f0bf0dea jyviko: Tests: a 1 degree crease rounds, and the knife edge's chamfers build, on SMLib smlib-batch-4-rulings
- 3772a6e97 jyviko: kernel, doc: an overflowing round goes first; an edge it removes is gone, and the fillet says so
- 9308224ef jyviko: Fillet rig: the knife edge's 0.5 chamfer builds
- 58e0d8346 jyviko: Tests: a 15° tapered text builds, every letter grown, exact where its outline gives it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 8ed4663ae jyviko: Mesh convert: a reconstructed bore is one wall, so the bracket has 9 faces
- 6d8e002f8 jyviko: UI: rim and wall picking tests for a circle of arcs that is one wall
- 3e5b358af jyviko: Fillets: a later round at a corner where earlier rounds meet blends them again with it
- 5d1b18f40 jyviko: Tests: a later r3 round at an r2 mitre, through the Fillet feature, makes the all-at-once corner
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- dfa84e84d jyviko: Blends: an edge is smooth when its faces' normals agree all along it, decided exactly
- 6cc759750 jyviko: SMLib import: an extruded circle is a cylinder over the face's trimmed range
- 9b3572797 jyviko: Fillet rig: the known-failing list names the report- cases, not their old ids
- 9851718ea jyviko: Curvature comb: purple envelope and orange teeth from their own theme tokens
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c9bf97ce4 jyviko: Blends: an edge is smooth only where its faces are tangent all along it
- 1e6c91a10 jyviko: Fillet rig: the concave arc where a bar's top meets a cylinder its sides run tangent into
- de9c005f2 jyviko: Blends: a blend face is named by its picked edge, not an edge it took up
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 73b053221 jyviko: Face capture test: extruding a split face in an uncaptured component is refused
- 918429c6d jyviko: Sheet machining: a trimmed To Object tool is measured as the prism its record proves
- f37b95498 jyviko: Native B-rep: a body is written as it serializes, not through a JSON value
- 298869f4d jyviko: Engine tests: the hostile-parameter test builds its starting model once per command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c47c1d26a jyviko: Tests: the fit and taper tests use geometry that still doesn't fit
- 8c37bc756 jyviko: Fillet rig: R10 past the full round is refused naming 7.5 mm, as the case asks
- a100c7c06 jyviko: Loft rails: a station grows about its section's centroid by length, not the mean of its control points
- e5476706b jyviko: Issue 616 test: the lid's volume is its closed form, 6703.5344
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b779364 jyviko: Tests: a point path's sweep has a wall along each line; coplanar walls join at a corner
- d945cf53a jyviko: Fillet and chamfer: a refusal as too large names the largest size that fits
- 8bcd81244 jyviko: Tests: a blend refused as too large is SMLib's NO_ROOM, in its own words
- deaf8e679 jyviko: Tests: convex blends past a cliff are cut from the part, as the owner decided
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- c93b3ad5a jyviko: Engine tests: SMLib's builds where truck refused or approximated
- b6b59e7b3 jyviko: Naming tests: pieces of one name on a grooved disc, the merged boss wall by its point
- ac52443df jyviko: Ring tests: a cut's volume is the piece it took, not the difference of the ring's volumes
- de606715b jyviko: Placement tests: a body mirrored in SMLib reads back from its record valid
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ee9fc3793 jyviko: Tests: a torus patch to thicken is cut from SMLib's one-face torus
- ca53656a2 jyviko: Schema tests: an empty face list is checked on the draft, which refuses it
- ab68a3d0f jyviko: View tests: the section cap test draws the cap in the cap colour
- 24bcaca03 jyviko: Engine tests: SMLib's faces, not truck's pieces, in the face counts and measures
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 17465a63b jyviko: Tests: the kernel-cases ladder is the reference for what the kernel builds; the seeded robustness goldens go
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 44b859fe6 jyviko: STEP import: a whole sphere bounded by one seam has its frame on that seam
- ce71791ec jyviko: Spline surfaces: a closed spline whose outermost knots appear once is periodic
- c7373279d jyviko: Viewport: hidden edges are drawn before the visible ones, so a visible edge is never covered by a light hidden copy
- b3cb826ed jyviko: Engine: an optional check before every command
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- a57ce13e7 jyviko: thread: a shaft thicker than a modelled thread is refused, never turned down
- 6b9f5e0e4 jyviko: thread: main's screw direction (#4414) out; the thread's hand is the one direction
- 5fc160732 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- d63aa814f jyviko: threads: main's tapped-hole sizes and shaft turn-down on the reworked thread
- cfc393d68 jyviko: Main's new callers of the placing calls that now return their error
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 810f0d66d jyviko: doc: a join groups pieces that touch nothing; only edge and point contacts are kept apart
- 1d98d5111 jyviko: smlib: solids touching round a pocket each export as one closed shell
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 94ee28d5c jyviko: doc: a join keeps solids that only touch as separate bodies
- 3e2b109cc jyviko: engine: feature commands take touching; a join's result notice
- ec6fa9706 jyviko: kernel: a seam with one face on both of its sides is a seam, and no pick takes it
- 19cf11ef3 jyviko: kernel-cases: ladder 07-fillets/016's second fillet rounds only its picked edge
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- 712caf8bf jyviko: engine: no boolean retries to report; overlaps are SMLib's exact intersection
- 431c3f6d0 jyviko: doc: plastic features' tools stand on the face as drawn
- 4ca7793a3 jyviko: doc: a hole in sheet metal is a cut-out or a bore by its drill's direction
- 8d91c19f1 jyviko: brep: an intersection curve's point is a function of t alone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.
- ba99405e2 jyviko: doc: a pattern or mirror of a pattern or mirror copies what that one made
- 386b1d123 jyviko: doc: a sweep round a closed path starts where the profile is (#3345)
- 5df8a5565 jyviko: engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
- f10dfd8d0 jyviko: kernel-cases: crossing equal holes leave each wall in two faces
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
A cut (or intersect) that names no bodies went through every body it met,
hidden ones too: a body hidden to keep it out of the cut was cut anyway. When
some of the active component's bodies are hidden, the cut now stores the shown
ones as its targets, so the hidden bodies stay as they are, and stay so once
shown again (the model never depends on what is shown). With nothing hidden it
goes through every body it meets, as before.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5641
* Cone primitive: solid.cone with base and top radius (#5641)
A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6724
* Extrude: the picked region is the one extruded again (#6724)
Since #5530 (#5302) every index or point pick grew to the whole drawn
profile that reference geometry cuts, so a lens or crescent clicked in
Extrude, where the face's projected outline cuts a circle, extruded the
whole circle while the dialog highlighted and counted one region.
Dialogs now send exact_regions: true with their profile picks, and the
command keeps each pick to the region it names. Picks without the flag
(scripts, agents, the CLI) still take the whole drawn profile (#5302).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With Start set to From Object (or a start offset), the automatic
operation was still decided from the profile: the engine probed for
material just past the profile plane, and the dialog kept the operation
it had latched before the start changed. A profile on a plate's top,
extruded 14 mm down from the plate's bottom face, came up as Cut instead
of Join. The engine now probes from the extrude's start (and, to an
object, reaches from there), and the dialog decides the operation afresh
when the start changes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5302
* Extrude: a picked profile takes the whole drawn profile (#5302)
A sketch on a solid's side face holds the face's outline as projected
reference geometry, and that outline cuts the drawn profile into pieces
of the sketch's graph. A pick by index or by point resolved against those
pieces, so extruding a rectangle that straddles the face's edge took
only the piece under the cursor.
The pick is now expanded to the drawn profile it belongs to, so it takes
every region of it. The drawn profiles are the disjoint faces of the
drawn graph, so an explicit pick of a drawn hole still fills only that
hole (#5176).
* Extrude: a pick expands across the reference geometry that cuts the drawn profile (#5302)
The expansion crossed every region of the drawn profile, so a projected curve that bounds a region inside the profile (the rim of a counterbore) was crossed too and the cut took more material than intended; now the expansion stops at that boundary. Fixes the regression in cmd::features::prism_local_tests::a_ring_cut_round_a_counterbored_hole_in_a_chamfered_disc, and keeps the behaviour of #5302 and of the #5176 invariant.
* doc: persistent names read as their structure; joint.inspect splits an edge with a blend face first
`persistent_name::{FaceName, EdgeName}` parse a face or edge name once (blends, inner walls,
copies, pieces, numbered pieces, `~k`) and write it back as the same text, bounded against
hostile input. A suffix after a blend's edge naming a later feature belongs to the blend face.
joint.inspect split an edge at its first `|`, so an edge whose first face is a blend
(`F4:blend:F3:+x|F3:+z#[…]|F5:-y`) came back as a cut-off blend name and a string that is no
face. It now uses `EdgeName::parse`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* doc: persistent names as typed values: features, roles, suffixes, a lexer and errors that say where
`FaceName` is a base (made by a feature in a role, a blend and the edge it rounds, an inner
wall, a body's face by index, other text) and its suffixes (copy, piece, numbered piece).
Roles are typed where the vocabulary is known (top, side:<curve>, +x, face:<k>, …) and kept as
written otherwise. The text form is lexed into tokens and read by the grammar in the module's
doc; a name that doesn't read says where and what was expected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: read what made a face, its kind and its feature ids through persistent_name
The places that took a name apart by hand to find the feature that made a face, whether it is
a blend, a copy, a numbered piece or a wall, or to remap feature ids on copy, now ask the typed
name (`made_by`, `split_feature`, `is_blend`, `is_copy`, `is_numbered_piece`, `is_wall`,
`features`, `map`). A name that doesn't read falls back to the old text check.
- An offset of a face that only names a blend inside it (`F2:top#[F5:blend:…]`) is no longer
taken for a fillet's.
- Copying a component remaps feature ids inside a piece's `#[…]` too.
- A shell's inner wall split by a later cut keeps the qualifier on the wall.
- joint.inspect finds the sketch curve of a copied side (`side:l1@F7.2`).
Finding a face by name (strip_piece, parent_piece) is unchanged: it reads a trailing
qualifier as the whole name's and moves once the text form says where it belongs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* engine: regression tests for press-pull on a wall that only names a fillet and joint.inspect on a copied side
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* names: an edge holds one face or more; made_by reads only the leading token
An open boundary's edge has one face and an edge several faces meet at has more, so an edge name
is a list of faces (a blend's own edge still takes two at most, as before). `made_by` reads just
the leading `F<n>:`, which every name a feature made starts with, so asking it of every face
each frame stays cheap. Names are read up to 1 MiB: a face engraved with text has piece names
past 4 KiB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* persistent_name: split into lexer, parser, write, text and tests
No code changed; callers' paths stay the same (`pub use text::*`).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4098
* Extrude: document which way a positive taper goes (#4098)
A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
A Single hole can take up to two straight edges of its face as references,
each with the distance of the hole's centre from that edge's line, measured
in the face's plane. `solid.hole` takes them as `references: [{edge, distance}]`;
the edges are found again by their persistent names, else their points, so
the hole follows them when the part changes, and each distance is a
parameter. A bad reference (no edge there, a curved edge, one square to the
face, parallel edges, a negative distance, a centre off the face) is refused.
In the Hole dialog, Reference 1 and 2 follow the face, each with its Distance
row; the canvas shows each distance as a dimension from its edge to the hole,
with a box just past the edge to type it in. Picking an edge measures its
distance (and its box takes the keyboard), typing one moves the hole, and
moving the hole measures them again. Edit Feature picks the edges again with
their distances.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* claim: #4100
* Deleting an inserted file removes its components, placements and joints (#4100)
A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.
Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.
* Only an inserted file's feature takes its component tree when deleted
Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
* Renaming a body that later features change evaluates nothing (#2467)
Model::rename_body now keeps the results when later features change the
body (a pattern, a chamfer, a join). It still evaluates when a body of
that name comes and goes or isn't the same body throughout, when a later
body's name is worked out from it (X (2)), or when a message quotes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename box: rename off the window thread, and locked bodies follow a rename (#2467)
The rename box commits body.rename through run_heavy, so a rename that
still evaluates later features (one names the body in its targets)
computes beside the window instead of freezing it. Locked bodies now
follow a body.rename from anywhere (the rename box, the control channel,
scripts), not only the rename box.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the profile library (#4003)
The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).
- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
with defaults worked out from the profile's size, refusals that name the
dimension that does not fit, anchors and placement, and exact section
properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
density) and frame.profile.insert (draws a profile into a sketch, locked by
default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
extrusion volume, undo; catalog entries in every locale; docs/frames.md;
ROADMAP M15.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: drop the built-in T-slot profile (#4003)
Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: members along frame sketch lines (#4003)
frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:
- profile: a built-in profile, or profile_sketch, a sketch whose material
(nested loops alternating, so two circles make a tube) is the section in
its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
reopen (format: pending/frame-members.rs), and are named after the profile
(Rect Tube 40x40x3, (2)…), numbering on past names already taken.
Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: fixes from the adversarial review (#4003)
- Default member lines are what was drawn: projected and other linked curves
and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
solid.extrude's "all" does, so a section sketched on a face works; the
even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
is the base): deleting or adding a line, or deleting another feature, no
longer renames other members, and frame.member stores every name it gives.
body.rename renames a member on its line (also for later member features);
a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
parameters, bare numbers take the design's units, and they are feature
inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
given are checked by name; a radius must be 0 or at least 0.01 mm; error
messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
refused; a 3D wire that runs back on itself is not a line.
Regression tests for each, from the review's scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the Frame Member dialog on the ribbon (#4003)
- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
picked in the view (or All Lines), a built-in profile and its dimensions or
a section picked in another sketch, anchor, angle, mirror and name, with a
live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
(the dialog shows the sketch instead of picking every region, which would
fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
thickness, so they translate apart from the existing Angle, Web and Flange;
the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
command labels it spells the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4563
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Section Analysis: a Hatch option, off for a plain cut in the body's colour (#4563)
The Section Analysis dialog gets a Hatch check box beside Flip, and
inspect.section a hatch?: bool (default true), so scripts, the CLI and the
control channel reach it too. Hatched, a cut is its body's colour tinted
toward the cap colour with 45 degree stripes, as before; off, it is the
body's own solid colour. The viewport (cap alpha in the uniform), the CPU
rasterizer and ui.render follow it, and the section keeps it when hidden
and shown again or edited.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* A renamed body keeps its number (#4957)
The design's body counter starts over at every evaluation, so a body
renamed after a join (the join changed it, so the rename cannot be
followed without evaluating the design again) gave its number back: the
next body took the name the rename freed, and a script that names a body
found another one.
The design now saves the names a rename freed, and the counter skips
them.
* Format
* claim: #5172
* Extrude without profiles keeps nested loops as holes (#5172)
With no `profiles`, solid.extrude took every region of the sketch, so
circles drawn inside a plate outline were extruded as well and filled the
plate's holes. The default now applies even-odd nesting to the drawn
profiles: a loop inside an outline is its hole, a loop inside that hole is
material again, and separate outlines all extrude. Sketches without nesting
keep the `all` selection, and explicit `profiles` (including "all") are
unchanged. Saved designs store their selection, so they recompute as before.
* Joint drive moves parts without evaluating them
A joint drive (also the Drive dialog and motion steps) changes only occurrence transforms, yet it
re-evaluated nearly the whole timeline: every feature that might read another component's
geometry (a sketch with any link, even to its own axis) hashed every occurrence's transform into
its fingerprint, so any motion invalidated it and everything after it, and no new pose was ever
in the cache.
- Placement digest: a feature now hashes only where the geometry it actually reads lies relative
to its own frame (link sources, anchors, profiles and paths from other components, mirror
placements; To Object and face/edge-picked planes read every component, relatively). Moving
parts that keep those relative placements leaves every result in place: nothing is evaluated
or re-meshed. In-context features whose referenced part really moved still rebuild.
- Evaluated ahead, applied once: `Ahead::evaluate` returns what it evaluated and
`Session::prime` lets the window-thread pass take it (history commands and dialog OK), so an
off-thread command no longer costs twice on designs past the cache's budget.
- Contact meshes are kept per body geometry across drives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Joint drive: booleans read only their input bodies' placements
A join, cut or intersect with named targets, and a Combine, read every
placement, so a joined part transferred to a component re-ran its boolean
at each new joint pose. Each now hashes only the placements of the bodies
it actually takes as inputs, resolved in its timeline input state (before
any later BodyTransfer), relative to the frame that evaluates it; Combine
reads its tools relative to its target. Unresolved and legacy component or
path reads keep the conservative dependency. 24 new joint_pose_ tests
cover new angles, transfers, targets, save/reopen, undo and real relative
motion (900 -> 800 mm3).
Supplement offered on #3397 by takuto-NA.
Co-Authored-By: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Creating a component recomputes nothing
A new, empty component changes nothing a feature reads, yet it changed
the placement fingerprint of every targeted boolean, Combine and To
Object feature, so `component.create` evaluated the timeline again:
- the first component of a design: `placement_digest` returned 0 while
the design had no placements and a nonzero value once it had one;
- To / From Object and legacy face- or edge-picked planes hashed every
component, not just those holding the bodies, sketches and
construction geometry the feature can reach.
Co-Authored-By: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Test: creating a component after a legacy face sketch recomputes nothing
A face extruded after its construction certificate is gone (a patterned
cut, a pad joined flush with it, then one more cut) is sketched on a
legacy face plane, which reads every placed body. A new, empty component
must not change what it reads either (reported by Tyler Chiriboga).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: takuto-NA <183465875+takuto-NA@users.noreply.github.com>
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
* Sketch Dimension: `name = value` defines a user parameter (#2916)
In a dimension's value (the D tool's box, and `sketch.dimension`'s `value`
from scripts, the CLI, MCP and the control channel), `name = expression`
adds the user parameter `name` with that expression and dimensions with
`name`: typing `width = 40` on a line gives a 40 mm user parameter `width`
and a dimension whose expression is `width`. A bare number is read in the
design's unit, as a bare dimension value is; an angle's parameter is in
degrees. The expression may be anything the parameter editor takes.
It is one command: one undo removes the parameter and the dimension
together, and a dimension the sketch refuses leaves no parameter behind.
A taken name is refused with a hint (type the name to use it, or change
it in Parameters), a reserved name with the parameter editor's message,
and a left side that is not a name (`2 = 3`) still fails to parse as
before. A driven dimension defines nothing. The reply carries `defined`,
and the status line names the parameter.
The splitter lives in the doc crate (`expr::definition`) so other value
inputs can take the same form later; editing an existing dimension, the
inline shape boxes and feature dialogs are follow-ups.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension: say why a name is refused, in the command's own words (#2916)
The dimension editor showed a refused definition raw, in the box and the
status line: "invalid parameters for `sketch.dimension`: value: `mm` is a
unit, constant or function name". It now reads "Sketch Dimension: `mm` is
a unit name, so it cannot be a parameter name": the editor passes the
command's errors through `friendly_error` like every other command, and
drops the `value:` field tag, since the box is the value. The taken-name
hint reads the same way: "Sketch Dimension: there is already a parameter
`w`: type `w` to use it, or change it in Parameters".
A reserved name says what kind of word it is and what that means
(`param_name_problem`, shared with the Parameters dialog): a unit name, a
function name, or a constant, "so it cannot be a parameter name";
`expr::reserved_kind` tells them apart.
`friendly_error` translates the command label with the interface language
(the engine's sentence stays English), so the prefix reads "Wymiar szkicu:"
in Polish.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
* Sketch Dimension test: keep the third line off the ribbon (#2916)
On current `main` the ribbon floats over the top of the canvas, and the
test's third line at sketch y = 50 projected under it: the click opened
Parameters instead of picking the line. The line now goes below the
first one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
---------
Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>