cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* STEP import: regression sweep over the step-conformance parts of known shape
Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens
* ui: per-tab accent behaviour and a larger application bar with a Start page button
* icons: silhouette master and flat assistant and agent link icons (open for review)
* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)
* icons: wire the silhouette master to inspect.silhouette; record the accepted icons
* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers
* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins
* ui: ribbon painting to the compact design
* ui: smaller icon button highlight and assistant mark on the bubble corner
* ui: short ribbon labels that wrap at spaces
* ui: ribbon buttons fit their labels and Finish Sketch shows its full name
* ui: constraint gallery, workspace menu, section list headings and richer tooltips
* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design
* ui: document tabs as rounded chips with a dimmer inactive label
* ui: document tabs fit their names and show close only when active or hovered
* icons: close and plus masters for the document tabs (open for review)
* ui: centre the new-tab plus and overflow button on the bar
* ui: a quiet rule under the ribbon tabs on non-contextual tabs
* ui: the application bar mark separates its faces with the bar colour, not white
* ui: open ribbon section label uses the selected tint and a chevron
* ui: dim the tab close and plus icons until hovered
* ui: every ribbon dropdown uses the chevron, the workspace card included
* ui: the active document tab uses the design's surface colour
* ui: the bug button's right padding mirrors its icon side
* ui: square constraint cells and a rule before the grid
* ui: constraint cells back to their earlier size, keeping the rule
* ui: smaller constraint cells and icons, centred in the section
* ui: constraint cells fit the height of the large buttons' icon and label
* ui: sketch Create titles share the other labels' line
* ui: format the application bar and ribbon changes
* ui: active tab surface token and the colour and hover tests that follow the redesign
* tests: the merged parameter and narrow toolbar tests follow the compact ribbon
* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations
* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* inspect.clearance: pairs whose bodies did not change are not measured again
Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: boxes and placed keys exactly as before the reuse
The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
* inspect.clearance: a large body is meshed once for all its pairs
Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.
A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section
A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).
- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
(`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
then the see-through ones blended over them, far sides before near sides and without writing
depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
colour, the rest see-through) and `--section z=27` run the commands the app itself runs
(`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Tests: measure the tool colour as it is drawn through a see-through target
The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* fmt
* Snapshot options: strip the colour's # rather than slicing it; README
Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* --tool: assign the bodies around the tool in groups, not one command at a time
Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
* Rasterizer: say where its glass and the GPU's differ
Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Add complete Italian UI localization
Translate all 1509 English catalog entries originally, register Italiano, guard complete coverage and exercise Italian labels and UI rendering.
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
* i18n: Italian is a partial catalog
it.json lacks 19 messages main has gained since this branch began, so as a
complete catalog it would fail every_complete_catalog_carries_every_english_message.
Like the other community languages, Italian is now partial: its gaps fall
back to English and new labels don't require an Italian string. The docs
line goes back to main's wording, with Italian among the partial catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: Copilot App <223556219+Copilot@users.noreply.github.com>
Co-authored-by: Ben Herbruck <bherbruck@herbrucks.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* feat(geom): surfaces through curve networks, and spline spaces to build them
Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges
kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry
BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(kernel): G2 boundary surfaces against a body's face
The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(kernel): a boundary patch with straight corners measures its own area
A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)
A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(doc): boundary surfaces through curve networks and loops of three or four
FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(engine): surface.boundary through loops of three or four and curve networks
The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).
Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* feat(ui): Boundary Surface dialog
Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* test(oracle): a boundary surface through a loop, thickened (#763)
Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
* refactor: boundary surfaces, review cleanups
Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM
---------
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* docs: ribbon UX redesign proposal (mockups and notes)
Seven mockup images and a short description of the proposed ribbon shell, with floating and
compact layout options. Pictures only; no app changes. The sketch variant with tab locks is
left out.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: update the UX mockups to the current command set
Adds the Sketch Pattern panel, Perforate, new joints and motion commands, Fair and Match Surface,
and the Render workspace; the workspace switcher now matches the app (Design and Render available,
Animation, Simulation, Manufacture and Drawing later). Command map covers all 389 commands.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: draw the UX mockups with the reviewed icon SVGs and accents
Ribbon, browser, history and navigation icons now come from the icon system in #853, with the
Sketch tab in the Sketch green and constraints in red.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* docs: address review on the UX proposal README
Describe the current toolbar in our own terms, and list only Design and Render as the workspaces in
scope.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
FreeCAD .FCStd and Rhino .3dm files open, insert and drop like STEP and IGES:
cadmpeg (Apache-2.0, pinned =0.6.1, native builds only) detects the format,
decodes it under its service resource caps, validates the model and writes it
as STEP AP214, which becomes an Import feature in a new component named after
the file, with the up and names options.
Only the fcstd, rhino and step codecs are compiled in (no default features).
ACIS is left out: cadmpeg's sat codec is a ShapeManager stream decoder.
native_cad.rs is the single importer seam. Self-made FreeCAD and Rhino box
fixtures, hostile-input, ZIP-bomb and cap tests, engine tests for the
component path; the browser build reports these formats as not supported.
A note under design format 23 says an Import's file can name these formats.
Co-authored-by: Jacob Oursland <jacob.oursland@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
glTF files open, insert and drop like 3MF/STL/OBJ: a component named after the file, the node tree as nested rigid components, repeated meshes as occurrences, metres to mm, Y up turned to Z up by default (up: z keeps axes), materials as PBR appearances. Bounded, hostile-input tested reader; no new persisted data. Closes#1505.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change.
- Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added.
- Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing.
- Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it.
- Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru.
Supersedes #706 and #800. Refs #620, #673, #756, #1004.
Contributed by @0xlillith.
Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
Adds a French catalog as a partial locale (missing strings fall back to English, like Russian), registered in the language list, with tests and attribution.
macOS hands files opened from Finder, the Dock or open -a to the application delegate's application:openURLs:, which winit's delegate lacks, so AppKit showed "SolidCraft cannot open files in the SolidCraft design format". open_documents adds that method to the delegate's class before launch finishes and queues the paths for the UI, which opens them like files named on the command line.
This is the one place SolidCraft's own code uses unsafe: the app crate denies unsafe_code instead of forbidding it, and only the two macOS-only functions in open_documents.rs allow it, with the reason documented there and in AGENTS.md. Adapted from VectorCraft (see ATTRIBUTION.md).
Closes#997.
The exact surface search could return an arbitrary parameter at a collapsed NURBS boundary, which corrupted the trimmed triangulation domain and lost volume on fine meshes of a fillet tapering to zero. Search results in the boundary projection are now validated, preferring a bounded parameter at a pole and snapping to a finite endpoint only when its transverse tangent has collapsed and the residual improves. Adds four regressions for decreasing chord tolerances, pole parameters, unbounded planar support and provisional preview.
Fixes#796.
The `pi` story of examples/demo/enclosure_ui_mcp.py keeps the 0.6 flow and adds the rim
rounded in one pick (a tangent chain), "Pi 4" engraved in the floor in DejaVu Sans Bold, and a
PETG material defined in the design, with its mass in Properties, before the height change.
The 0.6 story stays as `pi-0.6` (it built demo/pi-case). The center rectangle now comes from
the Rectangle drop-down. The finished case is in the action matrix corpus as
demo/pi-case-0.8.
docs/screenshots/demo-0.8.gif (9.3 MB) and demo-0.8.mp4 (9.9 MB) replace the 0.6 files: 41 s
at 9x playback.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.