Commit Graph
716 Commits
Author SHA1 Message Date
CamWightandClaude Opus 5.5 d506dd6552 A parts list's rows as a table reads them (#3874 P7b) (#12839)
PartsList::rows gives each row of a bill of materials with its values formatted, each followed by the
rows listed under it. The item comes from the rule a balloon reads, so the two can't disagree. A mass
follows the list's unit and decimals and a length the drawing's units; a value a row hasn't got is left
out, for the table to mark. A nested row's quantity is how many are in one of its parent, and `count`
has them all.

A row's key names each member, so one part listed in two places keeps two keys, and the limit is now
2048 bytes to fit the 65 members of the deepest list. The plan's "item with its padding" has nothing to
do: no padding exists. The text measure goes with its first caller, the sheet's tables (P8b).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 21:41:12 -05:00
CamWightandClaude Opus 5.5 2a2544956a Drawings: sheet text in a script the drawing's font lacks no longer holds up the window while a font is found (#12778)
* Paper scene: what a font adds to a table, a run's reach, and text in the sheet reply's schema (#4890)

One rule for everything that puts text on a sheet: `Scene::font_records_beyond`
counts only what a scene's font table doesn't hold yet, `TextRun::reach` says
how far a run's glyphs go along its baseline, and `drawing.scene`'s schema has
text runs and fonts, never a font's bytes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paper scene: a font's records are found by its id, not by its place in the table

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing dimensions: their numbers on the sheet, in the drawing's font (#4896 W19h)

A dimension on a sheet now carries its text: each value is set in the
drawing's font and language, measured, and placed along the dimension's
text direction, reading from the bottom or the right. Arrows flip by the
measured text width. A text the font can't set leaves the lines and says
why. The scene adds each dimension's fonts to its table once, counting their
records against the scene's limit, and measures text by its outlines for an
object's bounds. A dimension is read again when the drawing's units,
language or font change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a title block's labels and values set on paper (#4890 B3, #3875)

Each label is set as one line at its place, and each text cell's value in its
value box by the cell text rule, broken between words to the box's width when
its fit wraps, in the drawing's font and language. What doesn't fit is shown
whole and noted; a text no font can set is left off the sheet and noted with
why, so the sheet and its export never fail over one cell. drawing.inspect
lists each cell's notes; the sheet scene sets what was measured.

What a cell shows is worked out in one place for drawing.inspect and the scene.
The block's fonts count toward the scene's records with the border, so no view
takes them, and the scene is drawn again when the design or a cell's text
changes.

Ported from the personal PC's 1951bc696 onto today's drawings.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet scene: a title block's text set once while its sheet fills in, and its faces in the key (#4890 F5)

The sheet scene read its title block's fields and set their text again on
every extract that missed its last answer, and views are drawn one a tick,
so a sheet filling in weighed the documented component and laid out the
block once for each view drawn. The text is now kept with the last scene
and set again only for another sheet, drawing, design, model or lettering.

A scene is reused only for the same faces too: one family name can mean
another face once a font is installed or removed, and that face is another
scene. A family with no face is set in the built-in font, so it stays the
same scene until it's found.

Ported from the personal PC's d82fd03e7 onto today's title block text.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet text never waits on the window's thread: a title block's and a dimension's text wait for no font search, and inspect names the fonts fallen back to (#4890 F7)

A text in a script the drawing's font lacks needs a search of the installed
fonts. The window's sheet (`drawing_scene::extract`, `step` and the view's
job, on the UI's tick) now asks the search's thread instead of waiting for it:

- sketch: `paper_lines_now` beside `paper_lines_in`, as `paper_text_now` is
  beside `paper_text_in` (FontPending until the search answers).
- title block: `title_block_text::lay(.., wait)`. A text whose font is still
  being looked for is off the sheet and marks the `Laid` as `pending`, never as
  refused. While the last scene's block is pending, the fast path and the
  text's reuse both miss, so `extract` sets the block again until the search
  has answered.
- dimensions: the same rule for a dimension's number (`paper_group(.., wait)`,
  a `wait` flag on `draw_dimensions`). The step, its dimension step and the
  view's job (#11126) all ask; a dimension whose text is pending is kept as
  pending, and `extract` reads those dimensions alone again
  (`set_waiting_dimensions`), keeping each one only once its text is set.
- `SheetView::waiting_for_fonts` says when text is still waiting. `step` does
  not: pending text has no lines to draw again, so a `true` from it would spin
  on no work.
- `build` (export, `drawing.scene`) and `drawing.inspect` wait, so their
  answers are whole. `drawing.inspect` adds `font_fallbacks`: which font set
  each script of the title blocks' text that the drawing's font lacks
  ("Kana set in BIZ UDPGothic").

The scene tests' `settled` asks as the window does (extract, then steps,
until neither has more to do), with a time bound.

Ported from the personal PC's cae4a2969 onto F5; the dimensions' half is new
(one rule for every text the window's sheet sets). On `drawings` f50edc1ed:
`draw_dimensions` takes #12516's (frame, line group) pair as well.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 17:37:51 -05:00
CamWightandClaude Opus 5.5 67a325808f Drawings: a balloon, dimension or note attaches only to a part its view draws (#4896) (#12394)
Adding one on a part the view's saved settings leave out (its hide, or a source that doesn't
choose it) is refused, naming the view and the setting, and the parent view when it set it. One
added before a later view edit stays, and its inspect reply warns until the edit is undone.

The rule stays the view's own (`chosen`): `left_out` asks it about one occurrence path and says
why; `check_drawn`, `not_drawn` and `drawn_warning` beside the view commands use it for the three
annotations. `DimensionKind::paths` and `Anchor::path` list what each points at, so every kind of
dimension is checked. No model is evaluated.

On drawings a7c0310ab, #12516 (line groups) gave a resolved setting two more setters, the
view's sheet and the drawing. The words for where a setting was set are one function, set_on,
with an arm for each: a parent names its view, a sheet and a drawing say so, and a view's own
setting and the default add nothing. Hide and the chosen occurrences come only from a view's
chain today, so no refusal says "its sheet" yet; the match keeps the compiler checking each
new setter.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 15:34:10 -05:00
CamWightandClaude Opus 5.5 ecf75d9088 Drawings: a drawing, a sheet or a view saves the line group its lines are drawn in (#4890 D2d) (#12516)
A drawing saves the ISO 128 line group its views and dimensions are drawn
in; a sheet or a view may save its own. A view's group is resolved like its
other inherited settings: its chain, then its sheet, then the drawing, and
inspect says which gave it. The group joins the display settings a projected
view follows. drawing.create and drawing.set take it; the sheet commands and
drawing.view.edit take it or null to follow.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-06 01:29:01 -05:00
CamWightandClaude Opus 5.5 855ce28fda Drawings: a deferred drawing keeps its lines until it is updated (#4892 U2) (#12449)
A drawing's views follow the model automatically, or, when deferred, only on
drawing.update, which lets them draw from the model as it is now, for this
session only. The next model change holds again, and a close drops the update,
so a reopened deferred drawing waits. While it waits, its views show their last
lines, out of date.

drawing.set and drawing.inspect take and say `updates`, saved only when
deferred (a drawing-format pending note). drawing.scene, its hit and line
commands and drawing.export read what the page shows and list what is out of
date; drawing.status says held.

The ribbon's Update Drawing button stays planned as drawing.update.planned with
its art awaiting review, as Export does; the command itself takes the existing
update icon.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 20:53:02 -05:00
CamWightandClaude Opus 5.5 5792393fb2 What a saved view shows: source and hide, following its parent (#4816) (#11873)
A saved view now keeps the occurrences it draws and the ones it leaves out,
as the snapshot takes them. drawing.view.base, edit and inspect take them; each
follows the parent until a view sets its own, and a copy made alone keeps what
it showed. Boundaries, fitted scales and lines all read them through one rule.

A path whose occurrence was deleted never refuses the file: a hide path goes
quiet, and a view with nothing left is a placeholder that says why.

Replayed onto drawings fd4b7a7bc: the fit and the lines take reference_shown_percent
(the rename of reference_margin_mm in #7316) through shows(); the path limits now live in doc.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-05 03:07:08 -05:00
CamWightandClaude Opus 5.5 188192cb8b Drawings: a lost reference lists what it may now be, and a repair points it there (#4892 B5) (#12170)
A dimension or balloon whose edge, corner or face is lost now lists up to 16 leads, offered and never taken: the
blend face named after a filleted edge, that face's edges, then the faces the same feature made. Lookup still never
writes the record, so undo brings a lost reference back.

drawing.dimension.repair {dimension, slot, pick} and drawing.balloon.repair {balloon, pick} point a lost or
ambiguous reference at a pick of the same kind, on the reference's own occurrence path: same id and paper place, one
undo step, through one shared helper. Only a reference that no longer finds the one thing it names is repaired, so a
dimension's other, still-found reference is kept, and silhouettes repaired onto one cylinder are refused as add
refuses them. A pick takes the forms add takes, so a lead of the slot's kind from inspect passes back as it stands.
The saved format is unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 21:48:01 -05:00
CamWightandClaude Opus 5.5 da576824b2 Drawing views: a view's look is its visual_style, the viewport's name for it (#5307) (#11579)
A drawing view's setting for how it is drawn (visible lines, with hidden lines, shaded)
was display_style while the viewport calls the same idea its visual style. The field,
its command parameters, its schemas and its replies are now visual_style, on a view's
settings and on its own overrides. display_style is refused as an unknown field, as
drawings haven't shipped and no saved design holds it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:57:32 -05:00
CamWightandClaude Opus 5.5 f2b0b39393 A parts list's ballooned column, for its editor only (#3874) (#11964)
A table's column can be left off paper (printed: false, saved only then): the
layout places the printed columns only, while filters and overrides still read
every column. No printed column may read the ballooned row field, and a table
prints at least one column.

A new parts list gets a seventh column, ballooned, not printed.
Drawing::balloons_by_list works out once which list each balloon reads, and
balloons_by_row counts one list's balloons row by row, every row listed, 0
included; drawing.inspect gives parts_lists with each
list's counts. Worked out on each read and never saved.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:42:48 -05:00
CamWightandClaude Opus 5.5 b3af8346cf Drawings: a part's drawing starts on A3 and an assembly's on A2, each with its tolerances note (#3875) (#12000)
* Drawing templates: the built-ins carry SolidCraft's title block again, so a new drawing starts with it (#3875)

Every built-in template, ISO A4 to A0, is one sheet with the ISO border and
the built-in title block, so drawing.create with no template (iso-a3)
gives a drawing with the block. #7208 made them the border only; the
decision since is that a drawing starts with SolidCraft's block, and a
user replaces or changes the default template.

- A drawing saved as a template is the user's own: a copy of the built-in
  with a company's name in the block and its tolerances typed in starts
  drawings that keep both (tested through drawing.template.save and
  drawing.create).
- The built-in block by name stays, for a sheet without one.
- The general tolerances stay empty, and the five names (iso-a4 to
  iso-a0) and the one drawing_template setting stay: the part and
  assembly versions would be the same.
- The tests that gave a new drawing the block first no longer do.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates by kind: a part starts on A3, an assembly on A2, each with its tolerances note (#3875)

Ten built-ins, iso-a4-part and iso-a4-assembly up to iso-a0-part and iso-a0-assembly, each with its kind's general
tolerances note typed over the title block cell. template::default_for(assembly) is the one rule for the default, and
template::is_assembly says a design that places components is an assembly. drawing.create with no template uses it,
and drawing.template.list marks the design's default and says whether each built-in is an assembly's. The older names
iso-a4 to iso-a0 still read as that size's part template.

Preferences gets one setting per kind in place of the one; a saved name of the other kind reads as the kind's default,
and the old drawing_template key is ignored.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 17:38:27 -05:00
CamWightandClaude Opus 5.5 96bb41c480 Drawings: notes on a drawing, the record and commands (#4896) (#11898)
* Issue a revision: drawing.revise (#3874 R1)

drawing.revise appends a copy of a row to the issued history: an existing row as
it reads, or a new revision with the texts given, in one undo step. A row is
issued once. The copy keeps what it read through an edit, a hide or a delete, and
nothing is filled in: no date, checker or approval.

Issuing used to make a drawing unreadable, as a copy has its row's id and the
drawing's check refused any id seen twice. Each id now counts once, and issued
ids are unique among themselves.

model_version becomes {path, change}, on issued copies only. One function on the
session answers it, and answers nothing until version control exists.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing revisions: numbered 1, 2, 3 (#3874)

A drawing's new revisions are numbered 1, 2, 3, never lettered
(@CamWight, 3 Nov). drawing.set's revision_numbering is {start: 0 or 1},
the first number. A revision typed by hand is kept as typed; the next one
follows the highest number, and drawing.inspect says where numbering
starts. A record in letters is refused (drawings haven't shipped).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Revision tags on a sheet: add, edit and delete (#3874 R3)

A tag gains the sheet it sits on and its place there. drawing.revision.tag.add,
.edit and .delete keep them, inspect and every revision reply list them with what
each shows, and a sheet's delete counts and takes the tags on it. A deleted row
still leaves its tags showing the revision they had. Tags draw on paper once scene
text lands.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Saved tables on a sheet: drawing.table.add, .edit and .delete (#3874)

A drawing saves its parts lists and revision tables, each on a sheet with its
definition and place. Rows are never saved. A parts list starts at the top right
listing what its sheet documents, else the design; a revision table at the bottom
left; headings on top, QTY, rows of 7 mm.

Placing a list saves the numbers its view shows, once per view, so what is printed
doesn't move. Numbers are the design's: undoing the placing puts back only the
drawing, as every drawing step does, and the numbers stay. That one command changes
both, and the proof that nothing needs evaluating now allows it.

The tables are a ById list, as the balloons and images are, and keep its rules: at
most 1000, listed by id. Revision tags take their own id type.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A balloon reads its row in a parts list (#3874 L1)

A balloon can name the parts list it reads; else it reads its sheet's only list,
else the drawing's only one, else none, with the choices listed. Its row's item is
worked out on each read and never saved: drawing.balloon.inspect gives item and
row_status (ok, no_list, reference, no_row or not_found). A lost row never removes
the balloon. A list's delete reports the balloons that named it and clears their
links.

Bom::item_of cuts a path from the top of the design to start below the assembly
listed, and row_of is no longer test-only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Notes on a drawing: the record and commands (W19e, #4896)

A note sits on a sheet, a view, or an edge or corner of a view's model, saved by
name as a dimension's is, with the title block's text and fields, its place and
its text height. drawing.note.add, .edit and .inspect, one undo step each, no
model evaluated. Its one leader is worked out, never saved: a lost reference keeps
the note and its text, with no leader. Anchor is one type so other symbols placed
on a sheet can use it.

A view's notes go with its copy and delete; a sheet's with the sheet. The plan left
delete for later, but selection.delete now handles a drawing's objects, so notes
join it. Balloons and notes share Lookup::middle. Drawing them waits for text in
the paper scene (slice 12).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 16:53:53 -05:00
bherbruckandClaude Opus 5.5 b841eb939f Merge main into drawings (Nov 4)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 11:39:05 -05:00
CamWightandClaude Opus 5.5 49eedf122c Drawings: a reference to a suppressed or failed feature says so (#4892) (#11823)
* Labelled measurements on a view's snapshot (#5866)

measure: linear, aligned, angle from model points, radius from an edge, with
units and decimals for the labels. No new maths: drawing_measure's rules, and
a dimension's radial rule through one Lookup::whole_arc. Labels go through one
function, reading_label, which dimensions' text now uses too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pieces on one circle are that circle, and one piece is that edge (#4892)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A dimension between two flat faces (#4892)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A suppressed or failed feature's references say so, not lost (#4892)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:40:17 -05:00
CamWightandClaude Opus 5.5 669aaa7744 Drawings: a dimension finds its circle again after the edge is split (#4892) (#11869)
* Labelled measurements on a view's snapshot (#5866)

measure: linear, aligned, angle from model points, radius from an edge, with
units and decimals for the labels. No new maths: drawing_measure's rules, and
a dimension's radial rule through one Lookup::whole_arc. Labels go through one
function, reading_label, which dimensions' text now uses too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Pieces on one circle are that circle, and one piece is that edge (#4892)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 06:40:10 -05:00
CamWightandClaude Opus 5.5 a301359652 Dimensions on the sheet: lines and arrowheads in paper millimetres (#4896) (#11867)
Each dimension of a view on the sheet is one group, ObjectKind::Dimension,
after the views: extension and dimension lines and filled arrowheads
(Terminator::place, #9466), laid out by dim_layout_sized in paper millimetres, so it is the same size at any
view scale. All seven kinds draw; a chain is one line of frames at one offset
with each extension line once, an angle sits where its lines meet on the view,
and a cylinder's line runs across its silhouettes at the end on its offset's
side.

drawing.scene and drawing.export list each dimension: its status, whether it
is drawn, and why not. A lost one, or one on a view that isn't drawn, has no
lines and leaves the sheet and the file written. The provider keeps each
dimension's group by its record, world state, view drawing and units: a moved
view moves them unread, and an edit reads that dimension alone, in one short
step after the views. Text joins with B1.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 04:53:24 -05:00
semmelrindeandClaude Opus 5.5 d25f8198fa Pieces of a cut keep their names when the design is evaluated again (#11658)
A cut that leaves a body in pieces names them after their faces
(`order_lumps`): the piece whose least face name sorts first takes the
first name, and so on. It moved the names but left the pieces where the
kernel put them. The session then pinned the feature's body names in
that state order, and the next full evaluation (opening the design, or
editing a parameter upstream) handed them out again in a different
order: two pieces swapped names, and a later feature that named one met
the other. Found by a local model fuzzer.

The pieces now also take the family's places in name order, so the
names pinned are the order the next evaluation hands them out in. A
design saved before keeps the names a fresh evaluation gave it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 05:59:42 +00:00
3a23d21795 Lip: clearer guidance when the face is not a shelled rim (#10437) (#10871)
* claim: #10437

Co-authored-by: Cursor <cursoragent@cursor.com>

* Lip: say Shell first when the face is not a rim (#10437)

A solid box top left OK disabled with a vague shelled-body hint. Name Shell and the rim-around-an-opening requirement in the refusal, the dialog tip, and the command help.

Co-authored-by: Cursor <cursoragent@cursor.com>

* Lip: keep the dialog hint as it was, match the new refusal text in the test

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 04:42:08 +00:00
bherbruckandClaude Opus 5.5 481687fff3 Modeled threads: the thread runs down to a flat face with no uncut block, so a nut can bottom out (#11782)
* Modeled threads: run down to a flat shoulder so a nut can bottom out

An external thread running the whole face stopped with its groove clear of
a shoulder, leaving up to a turn uncut above it. The groove now runs on past
the plane of the face's end and is trimmed there, so its root reaches the
shoulder at every angle and nothing past the plane is cut.

A shoulder rising back along the face keeps the square stop, as do internal
threads, tapers, runouts and lengths stopping short. Where the kernel refuses
the trimmed cut, the groove also keeps the square stop and the feature warns.

Closes #11610

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Kernel ladder: record the thread cases that now reach their shoulder

Six cases gain the faces of the trimmed last turn; every other case is
unchanged apart from its timing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread at a shoulder: review fixes, and a test of the fallback

The shoulder check starts just off the face, as the free-end check does, so
a slope rising from the face counts. A groove the trim leaves nothing of now
falls back to the square stop too. A test forces the fallback and reads its
warning. The ladder's order and report go back to main's, changed only for
the cases this moved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread at a shoulder: check all the radii the groove cuts

The check for a shoulder rising along the face looked a fixed distance out,
which falls short of the groove on an undersized shaft. It now covers the
groove's reach. A test reads how each kind of shoulder is classified.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread at a shoulder: test the trim that leaves nothing of the groove

The test now reaches the path where the half-space keeps nothing, which is
the one that must fall back to the square stop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread at a shoulder: say so when the shoulder can't be checked

If the kernel can't make the rising-shoulder check, the groove keeps the square
stop as before, and the feature now warns that its last turn is left uncut.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-04 02:43:36 +00:00
f74c6605c4 Fillet: Mitre or Swept corners where two rounds meet (#11498)
* SMLib wrapper: a swept or mitred turn for constant rounds (Turn)

Brep::blend_dropping takes a Turn: Mitre (the default, as before) or Swept,
which sets solidcore's FilletSession::set_swept_turns before the corners are
made. A swept turn solidcore refuses at CreateFilletCorners comes back as
Error::TurnRefused with its reason and place (NoRoom at a concave side edge,
else CornerUnsupported). Swept is for Blend::Round only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Kernel: fillet rounds turn in a mitre or swept (FilletTurn)

fillet_removing, fillet_max, fillet_max_each and fillet_each take a
FilletTurn and hand it to SMLib, through the reblend of earlier rounds at a
later corner too. A swept corner solidcore does not build is refused as
invalid input with its reason and place: no smaller radius builds it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Design: a fillet saves its turn, mitre (default) or swept

FeatureKind::Fillet gets `turn` (FilletTurn: mitre, the default and not
saved, or swept), one pending format file. Evaluation hands it to the kernel,
pattern copies included, and refuses a swept turn with a style, fit, corner
or setbacks the kernel's swept corner does not take (SWEPT_TAKES).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* solid.fillet: the turn parameter, and the command's input and output schemas

`turn: mitre|swept` on solid.fillet, refused when unknown or with options a
swept corner does not take. solid.fillet now has its contract (FilletParams)
and reply type (FilletResult), registered with checked!, and leaves
schema/unconverted.txt.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Fillet dialog: a Turns choice, Mitre or Swept

A Constant radius fillet's Turns row sends `turn: swept`; choosing a narrowed
radius or a curvature corner puts it back to Mitre, and Swept puts those back.
Its tooltip says what each does where two rounds turn round a corner edge.
New strings in a pending locale file (en, de, ja, ko, zh); glossary entry.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Fillet turn: the schema tests' fixes and the complete catalogs' strings

The no-contract example in the schema tests is solid.chamfer now that
solid.fillet has one; the reply test checks the mid-radii form against the
contract (solidcore refuses that law's corner yet, #430) instead of building
it; Arabic, Hebrew and Vietnamese, complete catalogs, get the new strings.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Fillet schema test: variable and spline forms checked against the contract

solidcore fails a variable round on a box edge at this pin (status 1001, as
variable_radius_on_a_box_edge), so the reply test checks those forms against
the contract instead of building them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Fillet turn: the swept rig cases pass; the MCP no-contract example is solid.chamfer

cov-fillet-turn-swept-boss-base-r1 and
cov-fillet-turn-swept-pocket-sharp-corner-refused-r1 pass now that
solid.fillet takes `turn`: off the rig's known-failing list. The MCP bridge
test's example of a command without a contract was solid.fillet, which has
one now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 20:36:00 -05:00
e12afd11cc Ellipse and spline extrudes make one wall; coplanar faces never lose their names to a budget (#11687)
* Planar sources: decide coplanar faces by support group, no budgets that drop sources

map_planar_sources kept two budgets, `metadata` (2 MB) and `identity_bytes`
(16 MB), charged by each face's source descriptor and by every extra
candidate on its plane. When one ran out, faces silently lost their source
and with it their persistent name: a 300-hole plate whose top a comb of
grooves cuts into 62 strips lost the cap source from strip ~47 on.

The budgets bounded the real cost: each result face looked at every
candidate on its plane, faces x candidates when many faces are coplanar.
The candidates are now grouped by support once (`same_support` against
each group's first plane, through the existing PlaneIndex), each group's
chosen source, ambiguity and inner flag decided once, and the faces
without a role together with the competing tool faces grouped the same
way. Each result face then looks up its plane's few groups. The decision
is the old one: blocked by an unknown or competing support, else the
first candidate on the plane unless another candidate there has a
different plane, source or role.

Work: grouping looks at each candidate's index window once per group
(each candidate is assigned on its group's first look), and each face
looks at the group representatives near its plane, so the planes looked
at grow with faces + candidates. A counter (`looked`) checks it: n
pieces of one cap and n faces on its plane take exactly 2n looks (n*n
before), 3n with n blocking supports.

Tests: the holed plate keeps the cap source on all 62 strips and the
bottom (fails on the old code: face 352 lost its source); the existing
planar source tests pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Extrude: an ellipse or a spline sketch curve sweeps one wall

An extruded ellipse had four side faces (`F2:side:e1#1` to `#4`), one
per conic quarter, and a spline one per span: the profile holds such a
curve as several exact segments and SMLib got each as its own curve.

The Extrude feature's builder (`extrude_whole_sides`) now takes a
`one_curve` test from the caller. Each run of free-form segments of one
degree that it says are one curve goes to SMLib as one B-spline: the
Béziers' control points in a row, knots repeated the degree times at
each joint, each span as long as keeps the speed through the joint the
same (so the curve is C1 there and SMLib makes one face over it, as it
would not over a C0 parametrisation), weights scaled to meet. Exact: the
same curve, reparametrised. A loop starts at a run's start, so no run
wraps round it. The wall's history lists every piece, and its
construction source is its first piece's (as joined collinear lines).

The document says which segments are one curve: ExactSketchCurves now
also holds each free-form sketch curve's exact segments
(`find_free_form`: a segment that is one of them, either way round), and
the profile roles use it, so the wall is named `side:<curve>` from its
history rather than by the curve nearest its mesh centre.

Saved designs rebuild with these walls renamed (`F2:side:e1#k` ->
`F2:side:e1`); accepted, no alias kept.

Tests: kernel `pieces_of_one_curve_extrude_into_one_wall` (an ellipse in
four conics is 3 faces, its volume pi a b h to 1e-6, the wall generated by
all four pieces; a 3-span spline closed by lines is one wall; the same
solid as a face per piece); doc
`an_extruded_ellipse_or_spline_is_one_wall_named_by_its_curve` (one
`F2:side:e1`, no piece names, the same names on a second build and after
reopening).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Tests: a tray's far rim name is checked on the exact B-rep face

The tray test took the point `sheet:...:rim.far` finds as right when it
lay within 1e-3 mm of the strip z = 30, 199 <= y <= 200: a slack sized to
the mesh. It now asserts on the face the name finds, on exact geometry:
the point's distance to that face's surface (FaceSurface::nearest) is
within rounding at the part's scale (1e-12 x its size), and the point is
inside the face's boundary, counted by crossings of its record edges
(each asserted to be a line, the rim being planar).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Tests: delete tests/naming/, the records no test reads since the naming corpus stopped comparing against them

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Viewport test: smooth wall joins drawn from eight G2 spline walls

The PR extrudes each spline or ellipse sketch curve as one wall, so the
offset-ellipse ring the test built has no joins between faces any more.
The test now extrudes a circle drawn as eight cubic splines: eight walls
meeting with one curvature along eight upright edges (24 edges in all).
It still checks that those joins are left out of the shaded view, drawn
in the wireframe and selectable as edges.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

* Kernel ladder: 009 and 012 record the one-wall extrude (an extruded spline or ellipse sweeps one wall)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 21:27:14 +00:00
bherbruckandClaude Opus 5.5 1e0bfca819 Release 0.40.0-rc.2 (#11751)
Bumps the version to 0.40.0-rc.2 and folds the pending format changes into format 50. A published pre-release no longer reaches the Flatpak feed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 15:35:34 -05:00
CamWightandClaude Opus 5.5 fd4b7a7bc0 Seg2: one rule for an arc under a shape-keeping map (#4816) (#7316)
`Seg2::mapped(f, arc)` is a segment under a map of the plane that keeps shapes. Points go
through `f` itself (an arc's centre, every control point). `ArcMap { angle, mirrored, scale }`
says how the map moves an arc: it turns it by `angle`, after a mirror across the x axis when
`mirrored` (start `angle - start`, sweep reversed), and scales its radius by `scale`.
`ArcMap::turn(angle, mirrored)` keeps lengths; `ArcMap::rigid(f)` measures a map of points that
keeps lengths, from where it puts the origin and the unit axes, with a scale of exactly 1.

`Seg2::similar` and the three arc maps written out by hand use it:
- a sheet-metal region onto a panel's flat (`region_to_flat`, which measured its map by hand and
  now asks `ArcMap::rigid`);
- the mirrored flat (`flip_x_loop`);
- a sketch region mirrored in its x axis (`mirror_y`).

The points go through the same functions as before, so every result is the same, bit for bit.
This comes from the architecture review of the drawing work (2026-10-25): four places wrote the
arc rule out, each its own way, and one measured its map by hand.

`map_controls` is private to geom now: on its own it hands an arc back unmapped, which is what the
three hand-written arms were there to avoid.

Tests: every kind of segment under a mirrored map with a turn, a scale and a shift, point by point,
its length scaled and an arc's sweep reversed; the three old formulas, bit for bit (the sketch
mirror keeps a +0.0 start's -0.0); a rigid map's turn and mirror measured whatever its shift, and
the identity; the sheet-metal and mirror tests unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 14:59:59 -05:00
bherbruckandClaude Opus 5.5 c019e2555c Threads: a 12 mm hole now takes an M12 thread, and a modelled M12 builds in it (#11651)
* Threads: a 12 mm hole takes M12, and a modelled thread narrows a bore that is too wide (#11609)

Automatic sizing of a hole now takes the size whose nominal diameter the hole has (a 12 mm hole
is M12, not M14, the size whose tap drill is 12 mm); a hole near no nominal diameter is still
matched by tap drill. A modelled internal thread in a hole as wide as the thread or wider no
longer refuses with "too wide": the bore is filled in to the thread's minor diameter over the
threaded length and the groove cut there, and the feature's warning says so. A size that does
not fit the hole names the size that does.

A saved thread with no designation keeps the old rule through a pending format step, so an
existing design rebuilds with the size it had.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Threads: keep an old automatic size through edits; kernel-rig cases expect the narrowed bore (#11609)

Editing a saved automatic thread keeps `old_auto_size`, so it does not change size. The five
kernel-rig cases that expected a modelled thread in a hole as wide as the thread to be refused
now expect the narrowed bore, with the volume worked out analytically in each case. The thread
dialog's reopen pattern names the new field.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Thread dialog test: a 5 mm hole is suggested M5, its nominal size (#11609)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 17:09:27 +00:00
CamWightandClaude Opus 5.5 08cd8d6442 Drawings: title blocks on sheets, and a drawing can start from or be restyled by a template (#3875) (#7208)
* Drawing sheets: a copy of a title block on the drawing border, saved with the sheet (#3875)

`Sheet.title_block` holds a copy of its definition, as `border` does. Each sheet's check lays it
out on the drawing border, so a sheet without a border, a block wider or taller than the border,
or a change of paper that leaves no room is refused. `drawing.sheet.add` and `drawing.sheet.set`
take `title_block` (a definition, or null for none), a new sheet takes the block of the sheet it
follows, and `drawing.inspect` lists it. A sheet without a block saves no `title_block`, so an
older drawing reads as having none (pending format file `sheet-title-block.rs`).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: the built-in title block, on every new drawing (#3875)

`title_block::default_block()` is the 180 x 54 mm block of twelve cells approved on #3875, with
the legal owner read from the drawing's `organization` and the general tolerances as text to
change. `drawing.create` starts its sheet with it. The geometry tests read the built-in block
instead of their own copy of it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a title block's lines on paper, drawn after the views (#3875)

`TitleBlockLayout::paper` draws the outline, then every cell edge inside it, each once:
neighbours' shared edges, and edges that meet along one line, are one stroke. The sheet scene
paints the block after the views, and counts its records with the border's, so no view takes
its room. The view tests' drawing leaves the block off, so their scene is still the border and
the views.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: the title block's projection symbol, in the drawing's projection (#3875)

ISO 5456-2 (Annex A): a truncated cone and its end view, h across the cone's
small end from table A.1's sizes (3.5 to 20 mm), the largest that fits the
cell, lines h/10 wide. The end view is on the right in first angle and on
the left in third. The block only says a cell holds the symbol; the angle
comes from drawing.projection, and the sheet scene redraws when it changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a title block's fields, and text typed over its cells (#3875)

A title block cell reads its fields from the component the sheet documents (its
name, part properties, material and mass from the bill of materials), the
drawing, the sheet (number and count among the counted sheets) and the newest
revision row; a field with no value shows "-". A key its source doesn't have is
refused when a block is given or read. Sheets save text typed over their cells by
cell name; drawing.inspect lists each text cell with its value beside an override.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates as data: a drawing with no model, and ISO built-ins (#3875)

A template is a drawing with no sources, views, dimensions, balloons, revision
rows or documented components, so it is saved and read as a drawing is. A new
drawing is a copy with ids of its own. The built-ins, ISO A4 to A0 for parts and
for assemblies, are made in code when asked for and differ only in their general
tolerances.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates: drawing.create from a template, and the preferred ones (#3875)

drawing.create takes template? (default ISO A3, for a part or, for a design with
components, an assembly) and projection? over the template's. The new
drawing.template.list lists the built-ins and marks the one a new drawing starts
from. Preferences add a template for part drawings and one for assembly drawings;
the app fills in the preferred template and projection before drawing.create
runs, so a template named keeps its own projection, instead of changing the
projection after the drawing is made. A saved template this version doesn't know
reads as the default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates: apply one to the drawing open, moving nothing (#3875)

drawing.template.apply {template, dry_run?} gives each sheet the paper, drawing
border and title block of the template's sheet in its place (its last for the
sheets past its own). Text typed over a cell stays while the new block has a
text cell of that name; the cells whose text is dropped are listed. Nothing
moves: the views a new paper leaves outside the drawing space are listed. A dry
run answers the same and changes nothing; applying is one undo step, none when
nothing changes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: views a title block covers are listed, never moved (#3875)

A view lying over its sheet's title block is listed with the ones the drawing
space leaves out, after a change of paper or block (drawing.sheet.set) and when
a template restyles a sheet. Where a block sits is one rule, the one a sheet is
checked by (Sheet::title_block_outline), and the overlap of two boxes is one
rule in Aabb2::overlaps, which the title block's own cell check now uses too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates: save one as a file, and start or restyle drawings from it (#3875)

drawing.template.save {path} writes the drawing open as a template: its format,
and nothing it draws or documents. drawing.create and drawing.template.apply take
a .json template file as well as a built-in's name. A file is read as a drawing
is, then held to the template rules; files are read and written through the same
file check and atomic write as the sheet export. A drawing made from a file keeps
its own copy, so a later save changes no drawing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: the built-in title block is 180 x 49 mm (#3875)

The top row is 15 mm, Sheet is 30 mm wide, lined up with Mass, and Date of
issue is 32 mm. The top row now holds one line of the legal owner, two of the
general tolerances and the 3.5 mm projection symbol.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: one operation sets a sheet's title block, and drawing.sheet.set names the typed text it drops (#3875)

A sheet's block was set in two places: drawing.sheet.set kept the typed
text of the text cells the new block still has, and drawing.template.apply
did the same and listed what it dropped. Sheet::set_title_block is now the
one rule both use. drawing.sheet.set's reply gains `lost`, the cells whose
typed text a new block drops, as drawing.template.apply's reply has it, and
its help says that a view over the title block is listed too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates: the built-ins and a new drawing start with the border only; the built-in title block is added by name (#3875)

A template now holds only the ISO border by default. A title block,
tables, references and text are added to a drawing, and a template saved
from it keeps them.

- The ten built-ins (iso-a4-part ... iso-a0-assembly) become five,
  iso-a4 to iso-a0: one sheet with the ISO border. Without the block, the
  part and assembly versions were the same.
- drawing.create with no template starts from iso-a3. The two
  preferences for parts and assemblies become one, drawing_template,
  "Template for new drawings".
- drawing.sheet.add and drawing.sheet.set take title_block: "built-in".
  The built-in block's general tolerances are a part's or, for a design
  with components, an assembly's, through Sheet::set_title_block.
- An old name such as iso-a3-part is refused with the list of names;
  drawings haven't shipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing title blocks: a drawing with no number of its own is numbered by the component its sheet documents (#3875)

The identification number cell read the drawing's part number property,
and showed "-" for a drawing that has none, which is every new one. Now
such a drawing shows the name of the component the sheet documents, so a
new drawing of a part is numbered by the part until it is given a number.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing templates: a template saved from a drawing keeps typed text only over plain text cells (#3875)

A template saved from a drawing kept all the text typed over its title
block's cells, including text over a cell that shows a field, such as
the material or the title, which belongs to the design the drawing
documents. Now it keeps the text typed over cells of plain text, such as
the general tolerances, and leaves the rest behind.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing title blocks and tables: a field without a value shows nothing (#3875)

A title block cell or a table row whose field has no value (a property
nobody gave, a row field its row doesn't have, an uncounted sheet's
number) now shows nothing instead of "-".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing title blocks: the built-in block's general tolerances start empty (#3875)

The general tolerances cell of the built-in title block now starts empty for
parts and assemblies alike, rather than ISO 2768-m in the block and a part's
or an assembly's text added by drawing.sheet.set. A shop types its own, or
its template carries them, and an empty cell shows nothing.

- template::PART_TOLERANCES, ASSEMBLY_TOLERANCES, for_assembly and
  built_in_block go: "built-in" is title_block::default_block.
- drawing.template.list's help no longer speaks of part and assembly
  built-ins.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 11:01:13 -05:00
Mateusz SychandMateuszSychXpl bfb32cd6e1 Align: move bodies by frames that follow sketch and model geometry (#6257) (#7123)
* claim: #6257

* Align: move bodies by frames that follow sketch and model geometry (#6257)

solid.align takes from_frame and to_frame: a joint origin on the model
(a face's or round end's centre, an edge's middle, a corner, found again
by name) or a sketch point or a sketch circle's, arc's or ellipse's
centre. Both are resolved on every evaluation, so the bodies follow
their target when it changes. An optional angle turns the bodies about
the target's direction after the move.

The Align dialog takes sketch points and curves as From and To, offers
the Joint Origin snap and an Angle row.

* Align frames: box the joint origin (clippy large_enum_variant)

* Align frames: every moved body on the frame's component, placed once

* Align frames: a sketch id's length in characters

* Align frames: the dialog test's sketch curve hit carries its point

* Align frames: the dialog test takes Vec2 from solidcore-record

---------

Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
2026-11-03 15:47:52 +00:00
CamWightandClaude Opus 5.5 cca77b176f Drawings: a shaded view is drawn on the sheet as a picture under its lines (#5624) (#10926)
* A drawing's list of one kind of record: ById, with balloons first (#5426)

Each kind on a sheet writes out the same add, find by halves, cap, order and check loop. ById holds
those, so a kind's own file holds only its own rules, and the file's bytes don't change: it saves as
the plain list. Views and dimensions stay on their own lists for now, since other work is on them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A drawing keeps an image's file once, however many places it sits (#5426 W38e-1)

images holds the files and sheet_images each place one sits, so a logo on every sheet costs what one
does. drawing.image.add reads the file (bytes and pixels checked from its header before anything
decodes it), reuses a file with the same bytes, and saves the bytes without the path. A file goes
with the last thing that uses it, which Drawing::images_in_use alone says, and reading a drawing
refuses a file nothing uses or a record its file disagrees with. A sheet's list and delete take the
placements on it. Deleting one placement waits for selection.delete to take a drawing's objects. Its
pixels on paper are W38e-2.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet images: an image file's pixels on any paper grid (#5425, W38e-2)

A PNG or JPEG decoded once, then stretched over its paper rectangle onto the pixel grid a writer
asks for: a box filter in linear light with alpha premultiplied, so a shrunk logo keeps its edges
and gains no dark fringe. The size is read from the header and refused over 64 megapixels before
anything is decoded. An EXIF orientation is applied; colour profiles are not read.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sheet images: a placement in the sheet's scene and its SVG (#5425, W38e-2)

Each image placed on a sheet is a group of the new kind `sheet_image`, between the drawing border
and the views, so a view's lines draw over a photo. `drawing_pictures` holds both that group and
the provider a writer asks for its pixels, so the two read the same placement.

The provider holds what one sheet uses, decodes a file when it is first asked, once however many
placements show it, and refuses a sheet whose files hold more than 64 million pixels, from their
headers, before anything decodes. `drawing.export` passes it to the SVG writer in place of
`NoPictures`, and a file that won't decode refuses its sheet by name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: pin the product image's output before it is drawn in tiles (#5624, W17b S1)

The decoded rows of five product renders (orthographic on a transparent background, perspective on a
solid one, a PBR surface, two glass layers sorted back to front, triangles crossing every edge of the
picture), taken on this tree. The next change reshapes ImageTask into a prepare stage, tiles and a PNG
sink; they must not move. The PNG bytes are not pinned: their compression depends on the deflate
backend the build unifies (flate2's zlib-rs when the UI crate is built alongside, miniz_oxide
without), not on this code.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: pictures drawn tile by tile into any pixel window (#5624, W17b S1)

The CPU product renderer, reshaped so drawings can use it: one rasteriser (`Raster`) prepares a
scene once (appearances, projected triangles, glass sorted back to front), then draws each tile of
the picture on a canvas of its own. A sample's position comes from its whole-picture index, so tiles
put side by side are the picture drawn whole, to the byte.

- `ImageTask` (render.image) is that rasteriser over one whole-picture tile from the product camera,
  then its PNG: the same output, pinned by the previous commit's rows.
- `PictureTask` draws a `PictureRequest`: a `Projection` (the product camera, or an `OrthoFrame`,
  W17a's view frame as plain data: a `Plane` basis, a scale and a paper shift, on a
  `geom::pixel_grid::PixelGrid`), any list of `PixelWindow` tiles, `Supersample::One` (pixel centres)
  or `Two` (i + 1/4 and i + 3/4), a `BodyRole` per body (`DepthOnly` hides what lies behind it and
  draws nothing itself) and an optional background (none: transparent). Each tile comes back as
  straight-alpha sRGB RGBA rows, blended in linear light.
- The orthographic map is the frame's paper map, onto the grid, so lines drawn from the same frame
  register with the pixels (to 1e-9 mm in the test).
- Limits: 65,536 px a side, no total cap; each tile under the resolver's `RenderLimits`, as the
  product image is; at most 65,536 tiles; the prepared lists as a product image's; pixel tests up to
  8 per sample of the picture (128 M for a product image, as before), counted at admission by the
  one projection the raster uses, as main counts a product image's.

Not here: the drawing light, stored per-tile bins (S2, measured), the paper scene's picture item
(S3), 4x sampling, and `raster::render`, the snapshot rasteriser, which stays as it is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: time the tile renderer (#5624, W17b S2)

An ignored timing test, as `simplify_timing` is: a 65,548-triangle front view drawn as the
product image, as one 300 dpi picture, and in 64-row strips at 300 and 1200 dpi, each the median
of three runs. It is the measure S2's speed-ups are judged by.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: a tile passes over a triangle outside it before painting it (#5624, W17b S2)

Each tile placed and painted every triangle of the picture, then dropped those outside it: the
appearance lookup, the PBR normals and the colour decode ran for every triangle in every tile. A
triangle's work is now three steps, `corners`, `look` and `place`. Preparation runs them in
today's order, so its checks and errors are the same. A tile places a triangle first and paints
only those inside it. What is drawn doesn't change: the pin and the tile tests stay as they were.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: one light per picture (#5624, W17b S2)

`raster::shade` normalised its key light and highlight directions again for every sample,
although both depend only on the view. `raster::Light` works them out once per view and shades
with them. The tile renderer and the snapshot rasteriser (`raster::render`) both use it, so the
product light is written in one place. The arithmetic is the same, so every pixel is too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: sRGB codes from tables (#5624, W17b S2)

Each shaded sample was stored as sRGB through a power (three per sample), and each output pixel
was averaged from its samples through twelve more and written back through three: the powers
were most of a sample's arithmetic. Decoding is now a 256-entry table of `geom::srgb`'s own
values (#7162), which also ends this file's own copy of the formula. Encoding counts the code
starts (the linear values halfway, in sRGB, between two codes) at or below the value. Within a
billionth of a start, where the formula's rounding could fall either way, `srgb::encode8`
decides, so every code is the one it gives. A test checks both against `geom::srgb` at every
start, the numbers around it, the band's edges and a million values in and outside 0 to 1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: a tile's passes run in loops (#5624, W17b S2)

The raster went back through its step loop for every sample: the cancel check, the stage match,
the tile's window and its canvas bounds, once per sample cleared, tested or averaged. Clearing,
the opaque and glass passes and the downsample now each loop on their own up to the step's budget,
counting a unit as before; preparation and the glass sort still take one unit a call. A step
still checks for cancellation before each stage's run and still does at most 16384 units, so the
host's slices and the progress counts are the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: tests for a picture's light, glass order and test budget (#5624, W17b S2)

Three planted faults went through the image tests; each now has one
that fails:
- an orthographic picture lit from another direction than its eye: a
  face square-on to the view is the colour the product image gives it;
- glass placed by a triangle's first corner, not its middle: a tilted
  square whose first corners lie in front of the near one, its middles
  behind;
- a picture held to the product image's pixel-test budget: a face
  across most of an A0 sheet at 1200 dpi is prepared.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing sheets: a shaded view's picture on paper (#5624, W17 V9b)

A saved view in a shaded style draws on its sheet and in drawing.export:
draw puts one picture per entry of the view's parts under its lines, and
ViewPictures renders each on the writer's grid through the frame that
placed the lines. SheetPictures answers for a sheet's images and views.
The styles with lines stay refused until W06's exact lines.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Render: a picture's count of its tiles and its fixed limit, as #6483 has them (#5624)

A triangle counts only where it meets the tiles asked for, and a picture has a fixed 400 M pixel tests,
as #6483 at bf93e890e. V9b's stack holds an older copy of that slice; this drops away when drawings
takes main. PictureTask says what admission counted, for the view's running sum.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing views: a shaded view's pictures add up to one limit (#5624, W17 V9b)

A writer asks for a picture a band at a time, and each request is limited on its own, so ViewPictures
keeps what each view's requests have counted and refuses the next one past the limit, by name, before it
paints. That makes 400 M a bound on a whole view.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 08:21:51 -05:00
dc38349cbf Layer split stage 1: the B-rep record, native body file and Vec/Plane come from solidcore-record (#11496)
* Kernel: the B-rep record and the native body file come from solidcore-record

SolidCraft's portable B-rep record (`solidcraft_geom::brep`: brep.rs, topology, history,
envelope, part, curve2) and the native body file (`solidcraft_kernel::native`: the tagged binary
codec and the container) move to solidcore's `solidcore-record` crate: geometry as data, with
structural validation and no maths (solidcore's docs/layers.md, stage 1). Every caller uses
`solidcore_record::brep` and `solidcore_record::native`; the old copies are deleted.

What computes from coordinates stays with the kernel, in geom's `brep`:
- `brep::check`: the record's geometric checks (orthonormal frames, non-degenerate planes,
  unit revolution axes, non-singular placements). `check::validate` and
  `check::validate_built` are the record's validation and these together, and every caller of
  `Brep::validate` uses them, so what is accepted is unchanged;
- `brep::label`: a surface's natural ranges (a cone's apex), `curve_interval`,
  `edge_curve_interval` and `form_turns`;
- `brep::pcurve::eval`: a pcurve's point;
- `geometry::check`, `placement::moved` and `split_edges` become functions on the record.

The kernel's native module keeps the conversion between a body and its saved record
(metadata.rs) and checks the decoded record's geometry. `native/analytic.rs`, which no module
declared, is deleted.

solidcore-record is pinned to its rev on solidcore's `layer-record` branch.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

* Geometry: Vec2, Vec3, Plane and the profile types come from solidcore-record

The plain data of vectors and points, sketch planes and planar profiles (`Seg2`, `Loop2`,
`Region2`) moves to `solidcore-record`, with its constants and component-wise operators only
(owner decision, solidcore layer split). Their geometry stays in geom as traits:
`Vec2Geom`, `Vec3Geom`, `PlaneGeom`, `Seg2Geom`, `Loop2Geom`, `Region2Geom`, `Seg2ArcFit`,
`Loop2ArcFit` and `Region2ArcFit`, in scope with `use solidcraft_geom::prelude::*`. Every caller
names the types from `solidcore_record`; geom no longer defines or re-exports them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

* Kernel: pin solidcore-record to solidcore main f5e8e9a29

solidcore-record is merged on solidcore main (tangency-labs/solidcore#2519); its crate there is
identical to the rev pinned before but for its clippy configuration. The lock is regenerated
against the merged rev.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01NvoxKMbMFSQU8tzRtoJhtT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:04:26 -05:00
bherbruckandClaude Opus 5.5 2aa7e3e51c Release 0.40.0-rc.1 (#11457)
Bumps the version to 0.40.0-rc.1 and folds the pending format changes into format 49. The default-layout header test now expects the room the version really takes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 00:59:58 -05:00
CamWightandClaude Opus 5.5 ba69e5488c Drawings WE1: Inspect Drawing lists each sheet's views, with their names, dimensions and balloons (#4894) (#11350)
* Where a sheet's objects sit: bounds beside the scene (#4894 WE3)

The sheet scene now says where its border and each view sit on paper: the box
round what each draws, and a view's boundary, so one that can't be drawn can
still be picked. It is worked out once per assembly, beside the scene rather
than in it, so no writer sees it and the page needn't inspect each view.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Selected drawing objects: a view, dimension or balloon in the selection (#4894 WE4)

select.set takes {type: drawing, drawing, object} for the drawing open. It adds no
undo step and changes nothing saved, and a selected object leaves the selection
when an undo takes it or its drawing closes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Delete on a sheet: views, dimensions and balloons in one step (#4894 WE5)

selection.delete now works with a drawing open: a view goes with its dimensions
and balloons as one undo step, and one with views projected from it is refused,
naming them, unless they are selected too or contents: delete takes them. A sheet's
delete and this one share the record's one removal rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Tests: a view's box holds what it draws, and what's chosen goes in any order (#4894 WE3, WE5)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* What's on each sheet: drawing.inspect lists its views (#4894 WE1)

Each sheet in drawing.inspect now lists its views: each base view by id, followed
by those projected from it, with what it is called and its dimensions and balloons.
It is one pass over the record with no model read, so the Browser can read it once
per revision.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 00:59:36 -05:00
jyvikoandClaude Opus 5.5 ac3e6e0105 A panic solidcore's guard catches reaches the engine as EngineError::Internal
smlib's run() catches a solidcore panic and replaces the kernel (kept: the app does not die
natively), returning Error::Internal; the kernel turned it into KernelError::Failed and the
engine into Other, so hostile_params_never_panic and the fuzzer no longer saw kernel panics.
Now the kernel's wrapper errors go through KernelError::smlib, which keeps Internal; a body the
wrapper could not take because of a panic is Internal too. A feature whose evaluation hit it
records the result as internal (not cached: the kernel was replaced), and the command that
made it, or any command whose kernel call returns it, fails with EngineError::Internal under
its own id. Crash reports mark a panic inside a solidcore call recovered (kernel::guarded), and
the crash test's kernel mode panics inside a solidcore call.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 21:39:02 -05:00
jyvikoandClaude Opus 5.5 440fdaed13 Kernel work runs on threads with solidcore's 8 MiB stack
solidcore's algorithms recurse (subdivision, intersection, filleting) and its README asks for
8 MiB, a native main thread's stack; Rust starts other threads with 2 MiB, and only the web
build set more. kernel::KERNEL_STACK is 8 MiB and kernel::kernel_thread a thread builder with it.
The kernel's parallel map runs on a pool of its own with that stack (on a worker of a pool
already, as in map_with_local_pools, it stays on that pool as before), the one-thread mesh pools
and map_on_threads' helpers have it, and so do the engine's interference worker and the
evaluator's plan-mesh thread. A test recurses 5 MiB deep on each.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-11-02 21:38:50 -05:00
CamWightandClaude Opus 5.5 2f483a00c0 Drawing text F4: a character missing from the chosen font is drawn with another installed font (#4890) (#10515)
* Drawings: the font a drawing's text is set in, by family (#4890 F1)

A drawing names the font family its text is set in (`font`, saved only when
set; a pending drawing-format file). `drawing.create` and `drawing.set` take
it, and `drawing.inspect` reports it, with `font_note` when this computer sets
the text in the built-in font instead ("Futura isn't on this computer: set in
Liberation Sans"). Drawings name fonts by family, so they travel: a font file
is refused.

Paper text finds the family among the installed fonts as sketch text does
(`paper_text_in` for given folders), admits each face once a process, and
sets a family that is missing or can't be set on paper in the built-in font.
Bold takes the family's bold face; the serif flag comes from the face's OS/2
family class. The fixed list of drawing fonts is gone.

New drawings made in the app take the interface font when it is a family.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paper text: any face with outlines is set, and says how a PDF may carry it (#4890 F2)

A face is admitted for paper whatever its tables lack:
- a variable face is set at its default instance, which is what a PDF draws;
- its cap height is the one sketch text scales it by (OS/2, else the top of
  its `H`, else 70 % of the em);
- its PostScript name is what a PDF name can hold of its own, else of its
  family and style, else `Font-` and the start of its id;
- without a `post` table it has no italic angle, and a fixed pitch when every
  glyph advances alike;
- its stem width is measured across its `l`, else taken from its weight.
A bitmap or colour-only face, with no outlines to fill, is refused by name.

`Font.embed` says how a PDF may carry the face, from its embedding permissions:
a subset, the whole face (no subsetting), or not at all (restricted, bitmap
embedding only, or CFF2 outlines), when the PDF draws the runs' outlines with
their text beside them. Which characters a PDF name may hold is now one rule,
`is_postscript_char`, that the record's check and sketch share.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paper text: a font's family, for readers that pick fonts by family (#4890 F2)

`Font.family` is the face's own family name: its typographic family (name
ID 16), else its family (ID 1), read from the face itself (in a collection,
not the first face), without control characters and at most 255 characters;
empty when it has neither. A DXF text style picks a font by it; `Font.id`
stays the identity, so two faces of one family are still two fonts
(@0xlillith on #4890). The name lookup PostScript names use is one function
now, shared by both.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fonts: one list of fallback fonts per script, in sketch (#4890 F3)

The interface's lists of fonts to try for a script move down to
`sketch::fonts::fallback`, so drawings can use the same ones. Each row is
a family and the files it's known to be in. The interface reads the files
in the order it always did, so what it finds is unchanged.

- `CRAFT_FONTS_DIR` joins `font_dirs`, as the interface already has it:
  `SOLIDCRAFT_FONT_DIRS`, else the pack, then the system's folders.
- `font_files` sorts the files within each folder, so a search doesn't
  depend on how the system lists a folder.
- The Windows folder search takes its names from the Japanese list
  instead of its own copy of them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Paper text: a character its font lacks falls back to a font that has it (#4890 F4)

A text on paper was refused for any character its font lacks. Now each
such character falls back to an installed font that has it: the script's
list in `sketch::fonts::fallback` first, Han by the drawing's language,
then the first face in sorted order with outlines and the character.

- Runs split by direction, then by font. Every font takes the same em
  size, on the line's baseline and pitch. A space, a digit or punctuation
  stays with the run it follows when that font has it; a mark stays with
  its letter. A font fallen back to is shaped, with the drawing's
  language. Its nearest style is used: bold or italic isn't refused.
- A line its own font has all of is set as it was.
- A character no font has is still refused by name.
- The last-resort search reads each file's character map alone, stays
  within `MAX_FONT_FILES`, and keeps its answers, misses too, for the
  process.
- `paper_text_now` is for the window's thread: the search runs on a thread
  of its own (`font-search`) and it refuses with `FontPending` until the
  answers are in. `paper_text` searches where it's called.
- `paper_fallback_notes` names what fell back, for a drawing's status,
  from the answers so far: it looks for no font.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 21:27:16 -05:00
brett19andClaude Opus 5.5 8a730c6273 Fillets on solidcore: the largest size that fits is still the one the search builds; the kernel's names the edge
solidcore's fit is the largest size less a margin (34.99 where the L bracket's bend builds 35,
4.29 where #3435's ring builds 4.3), so the feature's search keeps naming the size, and solidcore's
is the answer only where the search finds none. The refusal keeps its words, "larger than the
faces beside its edges allow", with the edge after them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-02 20:13:26 -05:00
brett19andClaude Opus 5.5 881899bee1 Fillets on solidcore: a blend too large names the largest size that fits and its edge, from the kernel; the crossing-rails mixed corner is not supported (solidcore#2256)
solidcore sizes a blend it refuses as too large (the session's fit, SolidError::FilletRefused under
fillet_gn_section_generator). The smlib crate gives it as Error::TooLarge with the size, what it
sizes and a point halfway along its edge (an equal chamfer's ball radius turned back into its
distance); the kernel words it as the fillet feature's search does (largest_fit_note), and the
feature runs no search when the refusal names it. The 3x2 mixed corner whose rails cross, which
solidcore refuses (fillet_refuse_mixed_corner_crossing_rails), is not supported yet, citing
solidcore#2256.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
2026-11-02 20:13:18 -05:00
CamWightandClaude Opus 5.5 85be50df0d Reference parts: a view shows them by percent, not by a margin (#5866 V5c) (#10713)
reference_margin_mm becomes reference_shown_percent, 0 to 100. At 0 the
boundary is the model's box, as before, and no reference part is measured.
At 100 it holds the model and all the view's reference parts. Between, each
side moves on its own, so a part on one side grows only that side.

The model's middle now places a view, not the middle of what it shows, so a
view stays lined up with its projected views as its box grows. With nothing
grown the two are the same point and the picture is the same.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 18:36:53 -05:00
CamWightandClaude Opus 5.5 21888e8000 Drawing views: reference parts in a view's lines and thin on paper (#5866, V5) (#10520)
* Reference parts in a drawing view's lines (V5a, #5866)

A body placed through an occurrence that counts as reference is a reference
part: one rule, Document::reference_occurrences. Its lines say so in replies.
With reference_hides_model off (the default) the model's lines skip reference
parts at the one occlusion test, and reference lines test against everything.
The two roles merge apart, so a reference line never takes a model line's
place on one stretch. Extents come from the model parts when there are any. A
sketch curve is the model's: a reference part hides it only as it hides the model.

One thing the plan didn't name: reference lines stop at the view's boundary
(extents and reference margin) when model parts are there too, which is what
the margin is for; a part much bigger than the model would otherwise run off
the sheet.

Hidden reference lines in a scene are refused until dashed lines (V7b), as the
model's are.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Reference parts on paper: thin, under the model's lines (V5b, #5866)

Saved views and the snapshot's scene alike, 0.25 mm until the drawing styles
slice sets widths by kind of line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Reference parts: tests the planted faults asked for (#5866 V5)

A reference line against a model line on one stretch, and against another reference part; one part
placed through a reference assembly and on its own; a dimension on a reference part's edge; undoing
and redoing a change of type, set on the occurrence or its component; and a saved view's setting.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* A test reads any other paper item as no stroke (#5866 V5)

Naming Fill alone would stop compiling when #7590 adds a kind of item, with
no conflict for git to show.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-01 11:51:20 -05:00
CamWightandClaude Opus 5.5 9b73ec8d9d Display units: every length unit of the expression table shows its own numbers (#4896) (#7809)
A drawing's fixed unit may be any length unit of the expression unit
table (expr::UNITS: um, inch, yd, mil and the rest besides a design's
five), but the display functions knew only the five and showed the
others' measurements as millimetres. unit_scale now reads the same
table, so the two can't drift apart again; the five keep exactly the
scales they had (1 over 10, 1000, 25.4 and 304.8). The inch rule (a
fourth digit when it means something) follows an inch's size, so
`inch` reads as `in` does.

A design's own units are only the five, so nothing it shows changes.
The test that pinned `inch` to millimetres becomes one that checks
every length unit of the table shows its own numbers; angle names
(`deg`, `rad`) and other text keep the millimetre fallback.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 05:38:22 -04:00
CamWightandClaude Opus 5.5 0d4739fffb Drawing dimensions: between two cylinders' silhouettes (#4896, W20b) (#9251)
* Drawing dimensions: a hole's or an arc's centre as a point to measure from (#4896, W20c)

A linear dimension's point can be the centre of a circle or an arc, saved as its one edge's name
with `centre`. It is found again as construction geometry finds a round edge's centre
(`construct::as_circle`), in 3D, so any view can measure it; a split edge is ambiguous, and an edge
that is no longer round can't be measured. `drawing.dimension.add` takes `{centre: edge}` wherever
a corner goes, and refuses a straight edge.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing dimensions: a chain of distances along one line (#4896, W20c)

A chain dimension runs through 3 to 64 points in order (corners or hole centres) and reads the
distance from each to the next along one line as the view shows it: horizontal, vertical, along a
direction, or aligned from the first point to the last. The line runs the way the first point to
the last goes, and a point out of order is refused, never moved, so the members add up to the
overall from the first point to the last (`drawing_measure::chain`). It reads projected only (true
lengths of points off one line don't add up) and shows its members' numbers, never a text instead.
`drawing.dimension.add` takes `{chain: {points, direction?}}` and counts the points before looking
any up; `drawing.dimension.edit` changes its direction; inspect lists its members, its value being
the overall.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing dimensions: a whole cylinder's diameter between its silhouettes (#4896, W20b)

A cylinder dimension saves a face by name (ModelFace, as ModelEdge names an edge) and reads Ø
between the cylinder's two silhouettes, which any view but one along its axis shows 2r apart
(`drawing_measure::silhouette_side`). The face, or the pieces it was cut into, must lie on one
cylinder (the kernel's own condition for faces on a common cylinder); every face of the body on
it counts, since the kernel builds a whole cylinder as two half faces; and both silhouettes must
lie on those faces, so a fillet's quarter round is refused. `Document::face_reference` picks a
face by a point on it or by its index; `drawing.dimension.add` takes `{cylinder: {face}}`, edit
refuses its settings, and inspect can list face candidates.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing dimensions: between two cylinders' silhouettes (#4896, W20b)

A dimension between a silhouette of one cylinder and a silhouette of another, as the view shows
them. Each is named by a face of its cylinder and by its side: the one nearer the other cylinder
on the view, or the one farther (SilhouetteSide). So it keeps to them whichever way round the
view shows the cylinders.

- geom: drawing_measure::between_silhouettes takes the two cylinders (Cylinder, now geom's: the
  type doc kept privately), their sides and a direction as a linear dimension takes it (aligned:
  square to the silhouettes). The silhouettes must be parallel on the view and the axes apart
  there. Foreshortened when the axes aren't parallel in the model, or the silhouettes lie at
  different depths.
- doc: DimensionKind::Silhouettes { a, b: Silhouette { face, side }, direction }, read as the
  view shows it. Each silhouette must lie on its cylinder's faces (Lookup::on_cylinder, now shared
  with the cylinder kind). Document::silhouettes_kind makes two silhouettes of one cylinder of
  one body that cylinder's diameter (which takes no direction), else the distance between them.
- engine: drawing.dimension.add takes {silhouettes: {a, b: {face, side}, direction?}};
  drawing.dimension.edit changes its direction only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 04:49:53 -04:00
CamWightandClaude Opus 5.5 693cf911f1 Recovery: unsaved drawing work survives a crash (#3890, K9′) (#9289)
* Recovery: a change to a drawing alone is autosaved and recovered (#3890, K9')

A design's drawings are part of its document (K3b), so the autosave already sees a drawing's
change as unsaved work and writes it with the design, and recovery reads it back. This test
holds that: with the model saved, a change to a drawing's properties alone is autosaved, and the
recovered design has the drawing as changed.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: a drawing that breaks a rule is left out of the autosave and the crash copy, named (#3890)

Reading a design refuses it whole for one drawing that breaks a rule of the record, so an autosave
or a crash report's design holding one never opened again: all the unsaved work was lost. Both
copies now keep the rest of the design (drawing::openable) and name each drawing left out and the
rule: the autosave as its error, the crash report in its notes. A design's save error names the
drawing it couldn't save too (Drawing::label).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: a copy that must open keeps a design's drawing rules too (#3890)

drawing::openable now leaves out what a read refuses at the design's level as well: the later of
two drawings with one id, and the drawings past MAX_DRAWINGS, each named with its rule. So an
autosave never keeps a stale copy over a drawing problem. The id rule is take_id, which
check_in_design uses too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: a drawing too large to save is left out too, and the status line names it (#3890)

The autosave and the crash copy already leave out a drawing that breaks a rule of the record.
A drawing too large to save failed the whole autosave instead; `openable` now leaves it out the
same way, before its id, so the rest of the design is kept. Nothing is skipped silently: the
autosave's error names each drawing left out, and the status line shows it.

Tests: a drawing left out takes no id from a later one; an autosave leaves out one too large to
save; an autosave keeps what is hidden; the status line names a drawing the autosave left out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 00:56:45 -04:00
CamWightandClaude Opus 5.5 b21c377296 A lost dimension keeps its last value after the design is reopened (#4896 W19d) (#9764)
Dimension::last_good saves the value the session last read, written only when
there is one, and a save takes it from the session's reads as it takes what is
hidden: no read touches the document, makes an undo step or asks to be saved.
drawing.dimension.inspect answers this session's read first, else the file's.
resolve_dimensions never sees it, so a lost dimension stays lost. A value past
the drawing format's limit is left out of the save, not written into a file that
then can't open.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 18:59:15 -04:00
CamWightandClaude Opus 5.5 878bc1b421 A point on a curved edge finds it, between the edge's chords (#4896) (#9765)
An edge given as a point looked along the edge's mesh lines, within a point's tolerance, so a point on a
circle or an arc that fell between two chords found no edge: a radial dimension on most points of a rim
said "no edge at". A point off every chord now takes the edge whose chords are within what its body was
meshed to, and only when no edge passes through the point itself, so a point on a straight edge beside
a curve is still that edge.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 18:59:11 -04:00
bherbruckandClaude Opus 5.5 d01de87552 Merge main into drawings (Oct 30)
Brings the 1,270 commits on main since the drawings branch last met it,
including the first drawings landing (#8249), into drawings.

Merged with the drawings snapshot that #8249 landed (ebafe0748) as the
merge base, so only the drawings work after that landing is replayed on
top of main. Main's structure wins; drawings' additions are kept and
adapted to main's APIs (metadata Owner/KEYS table, checked! without a
contract argument, Snapshot visibility, crash journal outcome, the
part-properties normalisation, model_body_components, io helpers).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 09:54:08 -04:00
Rick MorgansandClaude Opus 5.5 bd1525dcfb Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332) (#9334)
* claim: #9332

* Expressions: hyperbolic functions sinh, cosh, tanh and their inverses (#9332)

`sinh`, `cosh`, `tanh` and `asinh` take a unit-less number and give one,
as `exp` does; `acosh` refuses x < 1 and `atanh` refuses |x| >= 1, worded
as `asin` and `ln` refuse what lies outside their domain. They are in the
expression help (`FUNCTIONS`, the parameter autocomplete), the
hostile-expression fuzz tokens, the parameters and equation-curve guides,
and the checking skill's list of functions. Horn flares (Salmon's hypex
`cosh h + T sinh h`), catenaries and the tractrix can now be written as
they are stated instead of expanded into `exp`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:59 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 1e5eb1e3b8 Sketch: find profiles island by island, so dragging in a large imported logo stays smooth (#6896) (#9313)
* claim: #6896

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

* Sketch: find profiles island by island and say when the search is cut short (#6896)

Every live drag frame ran the profile search over the whole sketch: every
spline piece of a large imported logo was sampled, checked for crossings
and traced again, about 100 ms per frame at 6,000 degrees of freedom.

Profile curves are now split into islands whose enlarged piece boxes do
not touch (the margin exceeds every tolerance the search uses), each
island's loops are found on their own and cached by a fingerprint of its
geometry, and the loops are nested into profiles over the whole sketch in
the order a single search finds them, so profiles, ids, holes and
whole-boundary certificates stay the same. The end-near-crossing lookup
covers its whole reach, independent of the grid's cell size.

The 50,000-piece limit now holds per island, and a sketch that still
exceeds it gets a warning instead of silently missing profiles.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_013WUFq6QFBqmZjxwaKy2J1M

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 11:13:52 +00:00
jeromehzl 966b10e731 Sketch: a feature on a failed sketch names that sketch (#9075) (#9276)
A sketch that failed (a dimension set negative by a parameter) left every
feature built on it with "unknown sketch 1 (it must come earlier in the
timeline)", which points at the timeline order. The evaluation now notes
the features that failed earlier in the pass, and a feature whose input
sketch is one of them fails with "sketch `Sketch1` failed: <its error>".
That result is never cached, since the cache key holds neither the
sketch's name nor its error: a second failing value or a rename shows
up at once.
2026-10-30 09:03:46 +00:00
Steve Jason 3d744cc8a2 A formula that is a bare number gets the design unit (#9261) 2026-10-30 06:42:04 +00:00
Matthew KnutsonandClaude Opus 5.5 991082fbaf Typed contracts for the construction axes, points and planes (#2829) (#7750)
* claim: #2829 (construct.* contracts)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Typed contracts for the construction axes, points and planes

The 19 construct.* commands get input contracts and FeatureResult as
their output, with shared types for references, planes, a plane or
face base, an axis line and a construction plane's name, each calling
the reader its handler uses (split out of geo, plane_param, the face
capture and named_axis_line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 06:03:04 +00:00
CamWightandClaude Opus 5.5 6a2bdbf144 Bill of materials: virtual components and a typed quantity (#3874, P6) (#9226)
`bom_quantity` is a part property of any component: what one placement of it means, an expression
evaluated with the design's parameters (pieces without a unit, else a length). A row's `quantity`
is what its placements add up to, with `quantity_unit`; pieces beside a length, or a quantity that
no longer evaluates, give none and say why. A quantity is a parameter user: a rename follows it, and
a parameter it uses can't be deleted. The CSV gains a `quantity` column at the end.

`virtual` marks a component with no geometry (grease, paint, a label): listed with its quantity,
weighing nothing. It can't be the active component, and one check after each undoable outermost
command refuses any change that puts a body, a sketch or a placed component into one, whichever
command made it. A file a damaged virtual component already fills opens, and other changes go on.

Mass, volume and area quantities wait for the expression units of #4811.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 01:15:51 -04:00
CamWightandClaude Opus 5.5 413c145c56 Bill of materials: stable item numbers, saved with the design (#3874) (#7779)
* Bill of materials types on one occurrence (#3874)

An occurrence can count in the bill of materials as another type than its
component, for that occurrence only: `bom_type` on the occurrence, set with
occurrence.bom_type (one undo step; it changes no geometry, so nothing is
evaluated). An occurrence without it counts as its component, so older
designs need no step; the format change is one pending file
(occurrence-bom-type.rs).

assembly.bom counts each placement by its own type: a purchased placement of
a kit part is one row without the kit's contents, a phantom placement lists
what it holds where it sits, and one component placed as two types gives a
row for each. Paste New keeps the types; Paste Instance counts as the
component. The compact list and the locales (en, de, ja, ko, zh) carry it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials rows: material, and mass when asked (#3874)

Every row of assembly.bom (and every part folded into a row) names the
physical materials of its definitions' own bodies, each once, with "; "
between several. An unassigned body's is Default. A subassembly or an
empty component has none of its own.

With mass: true each row also carries mass_g, what one of its parts
weighs as the row stands for it, so the rows of any list add up to the
assembly once:
- at the top level, all it holds;
- in parts only, its own bodies, because what it holds is listed beside
  it; but a folded part's row is the kit (all it holds), a purchased part
  is all it holds, and an inseparable one all but its purchased parts;
- a reference placement adds nothing, nor does anything inside it.
It is null when nothing in the part has a body, a body can't be
measured or measures a negative volume (inside out, such as an open mesh
facing the origin), or the definitions sharing the row's part number
weigh differently.

Measuring runs the kernel, so it is asked for: the Bill of Materials
window re-runs assembly.bom after every change and doesn't ask (0.2 ms
without mass, 135 ms with it on a bolted bracket). Placements are rigid,
so each definition is weighed once however often it is placed, and each
body is measured once with measure_mass (the same volume as measure,
without the topology counts' tessellation).

A body's material and its density now follow one rule:
Document::body_material (new, beside Document::density) is the material
its mass is worked out with, named as the library or the design spells
it: the assigned one when it is known and has a usable density, else
DEFAULT_MATERIAL (new, beside DEFAULT_DENSITY). Document::density is
that material's density, with the same values as before. So a damaged
file's unknown or broken material reads as Default, as it weighs, and a
hand-edited "steel" reads as Steel. The bill of materials uses both; the
other places that read a body's material or spell "Default"
(component.properties, inspect and others) move to them in a separate
cleanup PR for #4783, which brings the same two functions to main.

Document::body_owners returns each body's owner in order, so the rows
find their bodies in one pass. It no longer repeats the owner rule:
model_body_component, legacy_body_component and body_owners go through
the rule written once, given how to find a feature's component (the
timeline for one body; body_owners still builds its map once). The CSV
columns are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Physical properties: a reference placement adds nothing (#3874)

component.properties and occurrence.properties now leave out a placement
that counts as a reference in the bill of materials (its occurrence's
bom_type, else its component's: a fixture shown for context), and
everything inside it: no body entry, mass, volume, area, centre of mass
or bounding box, and it isn't in placement_count. That is the bill of
materials' rule, so a reference part is in neither the parts list nor
the assembly's mass, and every bill of materials list still adds up to
the assembly's Properties. The placement asked for counts whatever its
type: a reference fixture's own Properties still measure it and what it
holds, as a component's own bill of materials lists what it holds.

Only the totals change. The placements walk that face picking, sketches
on placed faces and the occurrence path lookup use stays complete, so a
reference fixture's faces can still be picked.

The type an occurrence counts as is now written once:
Document::occurrence_bom_types (new, beside BomType) gives each
occurrence's type in their order, looking each component up once. The
bill of materials, occurrence.bom_type's reply and the physical
properties use it, in place of the two copies in the bill of materials.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: one module of typed rows in doc (#3874)

The bill of materials now lives in solidcraft_doc::bom as the typed rows
of a bill of materials view. assembly.bom's JSON and CSV and the Bill of
Materials window present those rows; parts lists, item numbers and
balloons are to read them too.

- list(tree, request) walks the placements below the assembly once. One
  rule (classify) decides for each placement whether it is counted in a
  row, how what it holds is walked and what its row stands for when
  weighed, from the type it counts as, the view and the component's
  shape. "An inseparable part's purchased parts are listed beside it" is
  written there once, and the mass walk reads it.
- A row carries its identity (RowKey: the rows it is listed under and
  its lowest member, a component and the type it counts as), its item,
  count, each, the placements it counts by occurrence path, what it
  stands for (Holds), its part properties, materials, mass and children.
- Mass is a Mass: not asked, grams, or unknown with the reason (nothing
  to weigh, unmeasurable, the definitions differ). Each definition is
  weighed once for each kind of row and kept in the Tree. The assembly's
  total is weighed from the design the same way, not added up from rows,
  so it is known even when a row's definitions weigh differently.
- Bom::row_of(tree, path) finds the row a placement is counted in (a nut
  inside a purchased bolt is in the bolt's), or says why there is none:
  no such placement, a reference, or no row of its own.
- rows_deep() lists each row followed by its children (1, 1.1, 1.2, 2);
  Request::default() is assembly.bom {}; View and Group carry the
  commands' words.

What changes, beside that the output is otherwise the same:
- One placement budget (100,000) and one depth limit (64 levels) cover
  the whole list. A folded part's contents used to be walked under a
  budget of their own, so a design past the limit was listed with
  group_children; it is refused now, as it already was without it.
- Kits are compared by what they hold (part, type and count), not as
  text: a part without a part number whose id is 12 no longer reads as a
  part numbered "#12", nor a part numbered "P×1\nQ" as a P and a Q. Kits
  holding the same parts through different definitions (two bolt
  definitions, each with its own nut definition of one part number) are
  one row, and its children count every bolt's placements, where they
  showed the first bolt's definitions only.
- A folded part's row always stands for all it holds. It used to stand
  for its own bodies when nothing inside it was listed, which differs
  only for a phantom with bodies of its own inside it.
- An inseparable part's row in parts only names the material of what it
  stands for (its steel blocks read Steel) where it was blank, and a
  subassembly whose parts share one material names it at the top level.
- A damaged file's component placed inside itself is refused at the first
  level too, since naming a row's material walks inside it, as weighing
  it already did.
- A row's body count saturates, so a compact assembly with more placed
  bodies than a count holds (a block placed 2^64 times) is weighed
  instead of overflowing.

Materials follow Cameron's rule for a row that stands for an assembly
(C3, 2026-10-23): a part's row lists its own bodies' materials, as before;
a row that weighs what is placed inside it (a subassembly at the top level,
a purchased or inseparable part with parts inside it, a folded part) names
a material only when everything it stands for shares it, else none. A frame
of steel and aluminium parts reads blank, and a bought bearing of steel
parts reads steel. One walk (adding) decides what is placed inside a row's
part for both its mass and its materials, and each definition's materials
are read once.

Components are looked up by id once per list; they were searched for
each row and each kit. The window reads the rows directly instead of
running assembly.bom after every change, so it no longer adds an entry
to the crash journal each time it refreshes. The engine keeps the
command, its parameters and the files.

Tests check rows. The module's own: an empty assembly, one part, a row
named by its lowest member through part-number edits, one part number
of two types, a phantom in a phantom, a reference at the root and its
own list, the 64-level limit, the budget hit exactly with and without
folding, kits told apart by what they hold and the types they hold it as, a folded part's contents not
folded again, row_of for every type, every placement in one row or
none, a damaged file's missing component and cycle, the mass agreement
rule (moved from the engine with row_mass) and what adds to a row. In
the engine: the material rule for every kind of row, the JSON against the
rows for every option, why a mass is
unknown, the total against component.properties in every view, what a
row stands for and its placements, and the overflow. The assembly.bom
tests from #1888 on pass unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: structured, all levels (#3874)

P4: `assembly.bom {levels: "all"}` lists the assembly's direct contents, each subassembly a row with
its own rows listed under it, to any depth (items 1, 1.1, 1.1.1), each child counted `each` per one
of its parent and `count` in all.

- `doc::bom::View::AllLevels` goes through the one rule (`classify`) the other views use: a
  normal subassembly is a row holding what it holds, listed under it as all levels again; a
  phantom has no row and what it holds joins the level it sits in, merged with the same parts
  there; a purchased part is a row with nothing under it unless `show_purchased_contents`
  (Request::purchased_contents) asks for its contents; an inseparable part is a row with nothing
  under it; a reference counts nowhere.
- The rows under a row are the folded-part rows already built (kits), so subassemblies with one
  part number and different contents are different rows, and no second nested builder is written.
  All levels gathers every level as it gathers the first; a folded part's contents are still
  gathered by part number in the other views.
- The JSON and CSV already nest to any depth; `show_purchased_contents` is echoed with the other
  options. Each row's mass still adds up to the assembly at the top.

Tests, worked by hand: four bolts and a two-bolt subassembly placed twice (8 bolts in parts only;
in all levels the subassembly twice with 2 bolts each, 4 in all, beside the top's 4); three levels
deep (2 x 3 x 2: counts 2, 6, 12, items 1, 1.1, 1.1.1, the CSV in that order); each type (a
phantom's bolt merged into its subassembly's, purchased with and without its contents,
inseparable, reference); two subassemblies of one part number with different contents as two
rows; `levels: "deep"`, a flag that isn't one, and an assembly over 100,000 placements refused.
D's test that a folded part's contents are listed as parts only lists them now names the two views
it holds for, and checks all levels' nested rows (the subassembly inside the folded part a row with
its own rows).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: parts with one part number are one row only when they hold the same to any depth (#3874)

The kit compare looked one level down: two parts with one part number whose contents differed two
levels below merged into one row, and the children that only one of them held came out at each 0.

Each placement now has a kit, a number interned from what it holds (each child's part, type and
own kit), built in one pass from the last entry back: an entry's children come after it in the
walk, so their kits are known first. Rows are told apart by that number.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: a phantom's own bodies are a row of their own (#3874)

A phantom had no row, and its own bodies were weighed in the assembly's total but in no row, so
the rows didn't add up. Its own bodies, when it has any, are now a row of the phantom's type that
stands for them alone, as a subassembly's own bodies are in parts only; what it holds still counts
where it is placed. Inside an inseparable part in parts only, nothing changes: the part's row
weighs them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: the assembly's total mass in assembly.bom (#3874)

`list` weighed the assembly as a whole (from the design, not added up from rows) and the command
dropped it. `assembly.bom` now gives it as `total_mass_g`, and so does a JSON file it writes, only
when `mass: true` (null when it isn't known).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: all levels as JSON lists its rows one after another (#3874)

All levels nested each level's rows in the row above it: two JSON containers a level, so the
64 levels a list may hold came to 129, past the 128 that serde_json (and so the MCP server and
the control channel) reads. In all levels `assembly.bom` now gives the rows one after another,
each followed by the rows under it (items 1, 1.1, 1.1.1), as its CSV does; a row listed under
another still reads its item as text and gives `each`. A folded part's contents, one level, stay
inside its row as `children`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: a row whose definitions weigh something and nothing differs (#3874)

A row gathering a definition with bodies and one with none (one part number on a steel block and
on an empty assembly) said there was nothing to weigh. Their masses differ, so it says so; only a
row where none of them has a body has nothing to weigh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: definitions agree on a mass within the measurement accuracy (#3874)

A row's definitions had to weigh the same to 1e-9, but the kernel measures a volume from
tessellations, and one part modelled another way is tessellated differently: a pin made as a
cylinder and as a revolved rectangle measured 1.05e-5 apart, so it read as two masses. The bill of
materials now has its own `bom::MEASURE_ACCURACY` (1e-4: ten times that gap, with its doc on what
it follows: the kernel's `measure` gives one solid's volume to about that, relative, however the
solid was modelled), and a row's definitions agree within it. A pin 0.1% wider (0.2% heavier) still
differs. The kernel is unchanged: its work is paused while it is being replaced.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials guide: all levels, purchased contents and this round's changes (#3874)

The guide had no `levels: "all"` or `show_purchased_contents`. It now has both, with how all
levels tells subassemblies apart and lists its rows as JSON, a phantom's own bodies as a row, the
assembly's `total_mass_g`, and definitions that agree on a mass within the measurement.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: materials are bodies', as the code says (#3874)

The rule stays as built (a row that stands for an assembly names a material only when everything
in it shares one), but its comment and the guide said a material set on a component is set on
all its bodies. `material.assign` takes bodies only: a component has no material of its own yet.
The module notes now say so, and where component materials will join the rule.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: a body's volume measured once with the evaluated model (#3874)

`assembly.bom` measured each definition's bodies anew for every list, and `component.properties`
measured each placed body again. A body's measure depends on nothing but the body, so the evaluated
model keeps its volume (`ModelBody::volume`, shared by clones, as its outline box is), and both
commands weigh that one measurement: the same grams to the bit. A body offset scales it by the size
of its determinant (`mat_volume_scale`) instead of copying the B-rep to measure it. The physical
properties still measure the placed body for its area, centre, box and counts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: row keys, what rows stand for, members and row_of stay in doc (#3874)

Nothing outside `doc` reads them yet: `RowKey`, `Unlisted`, `Holds`, a row's `key`, `stands_for`
and `members`, and `Bom::row_of` are crate-private until item numbers and balloons need them, so
they can still change without breaking another crate. The engine test that read them is covered
by doc's own (`row_of_finds_the_row_a_placement_is_counted_in`, `every_placement_is_in_one_row_or_none`).
`Unknown` stays public: `Mass::Unknown` carries it, and a public enum can't carry a private type.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Assemblies: one fallible placement walk for totals that cover the whole assembly (#3874)

The physical properties walked the placements twice in their own code, with the 64 levels and
100,000 placements written as literals, and the bill of materials gave the same refusal in words
of its own. `Document::placements_below` is that walk once, from any placement, refusing what is
past `MAX_PLACEMENT_DEPTH` or `MAX_PLACEMENTS` (never walking it in part), and both use its
refusal: "the assembly is deeper than 64 levels or has more than 100000 placements". The physical
properties now allow 100,000 placements below the start, as the bill of materials does (they
stopped at 99,999).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: the same rows for less work (#3874)

- Part numbers are borrowed from their definitions (`Part<'a>::Number(&'a str)`) instead of copied
  for every placement grouped and every kit.
- A row's members, the placements' paths, are built only when the list is asked for them
  (`list_with`, for item numbers, balloons and `row_of`): the walk then keeps paths and moves each
  into its one row instead of copying it. A list made for its rows alone builds no paths at all.
- `row_of` reads an index of member paths, built once with the list, instead of scanning every
  row's members for each placement asked about.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* occurrence.bom_type: input and output schemas (#3874, #4035)

`OccurrenceBomTypeParams` takes the occurrence (an id or a name), its path when given and the
type (one of the five, `same_as_component` or null), each read by the handler's own reader: the
path through `cmd::path_ids`, split out of `occurrence_path`, the type through
`cmd::occurrence_bom_type`, split out of the handler. The handler builds its reply from
`OccurrenceBomTypeResult` ({occurrence, bom_type, effective, changed}).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials tests: all levels presented at every depth, and its caps (#3874)

- `assembly_bom_presents_the_typed_rows` now covers all levels (with mass, purchased contents and
  by definition) and the total mass, on a three-level design with a purchased gearbox holding a
  gear, comparing every field of every row down to 1.1.1.1.
- All levels lists 100,000 placements and 64 levels, and refuses 100,001 and 65.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: static materials, typed in for a component (#3874)

A value the bill of materials works out can now be typed in by hand for a component (a static
value, Cameron's choice of word). Material comes first:
`component.metadata.set {component, material}` takes any text up to MAX_TEXT_BYTES, and
`component.metadata` reads it back as `material`. It is shown wherever the component is listed,
at every level and in every view, over the materials worked out from its own bodies or an
assembly's blank, and the row carries `static: ["material"]`. Clearing it (empty text or null)
brings the worked-out material back.

It is kept the way `bom_type` is: a part property in the component's metadata (`material`), so
there is no format change and older releases keep it. `PART_ONLY` names both keys in one place:
Design Properties doesn't list them and `document.metadata.set` refuses them. Another tool's
non-text value is kept and reads as no static material.

The bill of materials says one thing about the part everywhere: a static material also stands for
the part in the one material an assembly around it shares (two parts typed in as S355 make their
frame read S355; S355 beside plain steel reads blank). A phantom's row is its own bodies, so its
static material names those only, and what it holds keeps its own. A row gathering several
definitions takes the first one's that has a static material, as its description does. It only
names: mass still comes from the bodies.

The CSV gets a `material` column at the end, so the other columns keep their places: what the row
shows, the static material or the worked-out ones joined with "; ".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Bill of materials: stable item numbers, saved with the design (#3874, P5a)

A numbered parts list keeps each row's item number under the row's key in
`assembly.item_numbers`, so a row keeps its number when others are added,
removed or reordered. New rows take the next number after the highest at
their level; Renumber restarts a view in list or item order and leaves
locked rows alone; duplicates are marked; numbers change no geometry and
are part properties in the undo history.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:29:25 -04:00
CamWightandClaude Opus 5.5 8679063629 Drawing revisions: rows added, edited and deleted by command, and listed by drawing.inspect (#3874) (#9150)
* cell: rules both kinds of table share (#3874)

Sheet tables (parts lists first) use the title blocks' cell content, so
the rules both read live in cell.rs:

- Source::Row: the row of a sheet table a cell is on. A title block has
  no rows, so its validation refuses a cell that reads one.
- Warning::Width: a word wider than its value box, shown whole, never
  cut: the width warning that measured text brings.
- is_snake_case moves here from title_block.rs: table columns are named
  by the same rule as cells. check_text is shared the same way.

Tests: a title block cell reading a row is refused, beside other parts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 640cc3e0f5e6b03366b9e231e62cd0b0229f32c6)

* Sheet tables: the parts-list table model and layout (#3874, P7a)

A Table is a sheet table's definition: its columns, the side its heading
is on (top, or at the bottom with the first row just above it, ISO
7573), its row height (7 mm by default), text height, line widths, a
filter and overrides. A column's cells are the title blocks' cell
content read against each row: row fields and text. Rows are input, in
their listed order, with their values worked out and formatted, so a
filter (parts, assemblies, purchased, text per column ignoring case)
hides rows and never changes a count or a quantity.

Table::layout places it with a text measurer, from the right end of the
heading's outer edge:
- a column without a set width is as wide as its widest line, padding and
  line insets added; a set width is kept;
- every cell in a set-width column breaks between words to fit, and its
  row grows to hold its lines, 10/7 cap heights apart (ISO 3098-0); a
  word wider than its column is shown whole with Warning::Width;
- a row field the row doesn't have shows "-"; an override shows its text
  and keeps the value it replaces, an empty one is a blank cell, and one
  for a row that has gone is kept;
- cells sit inside their lines as a title block's do.

Limits, refused and never truncated: 10,000 rows and overrides, 64
columns, 1 MiB of text in all (each cell's text counted before it is
built), 256-byte keys, a measured width that isn't finite and at least
0, a table off the paper's coordinates.

Nothing is saved or drawn yet: the real measurer, DXF and CSV output and
the command come with P7b.

Tests: hand-worked cell corners and text anchors with a fixed-width
measurer, the heading at the top and at the bottom; wrapping and the
row it grows; a word too wide; overrides, blanks, "-"; each filter
leaving every shown value as given; JSON round trip, defaults and
unknown fields; every limit and one past it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 0c5180267d0cd53b06ef13c91d4be43173f2e6d7)

* Revision record and table (#3874, W31, P14a)

A drawing's revisions as data (geom::revision): one RevisionRecord for
the whole drawing, or per sheet with each sheet numbered apart.

- A row holds what people type: revision, description, designer,
  checker and date. Adding a row fills in only the next revision;
  nothing fills in a date, a checker or an approval.
- Numbers run from 1, or 0; letters run A to Y without I, O, Q, S, X
  and Z, then AA, AB. The next revision follows the highest in its scope
  among the rows and the issued history, so an issued revision is never
  given out again. A typed revision is kept as typed; in letters one
  with a skipped letter is accepted with a SkippedLetter warning.
- Rows are added, hidden and deleted; issue() appends a copy of a row to
  the issued history, which nothing removes or changes (private, read
  through issued()). Row and tag ids come from the caller (the
  design's random ids), never from a counter, so two people adding rows
  never take the same id; an id in use is refused.
- Triangular tags bind to a row id and show its revision or their own
  text; deleting a row reports its tags, which keep the revision they
  showed, marked lost.
- The revision table is the sheet table (table()): Revision,
  Description, Designer, Checker, Date, heading at the top; hidden rows
  are left out. The table's rows and a title block's revision fields
  (newest(), hidden rows included) read RevisionRow::field, one path.

This is the drawing's revision only: the model's revision and the
export time are kept apart. Release, approval and frozen snapshots
(G16/G22) are not in this slice. Nothing is placed or saved on a sheet
yet (W12, W15).

Tests: numbering both ways with the skips and past Y and YY, typed
revisions and the warning, the next after issued and deleted rows, per
sheet; add fills in nothing else; history kept through hide and
delete; tags reported and lost; the title block's fields and the table
rows from one function, laid out by the sheet table; JSON round trip,
unknown fields and damaged records refused; the caps; an id in use refused.

- An issued copy keeps the model version it was issued against
  (model_version, given to issue(); none until version control gives
  versions, #2869), so the release step has its field here. It is read
  by the label rule, like the revision.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fa7849ada783c91f2ca52fb4a11687cf1a71de77)

* Drawing revisions: rows added, edited, deleted and listed by command (#3874, W31)

A drawing saves one revision record for all its sheets (Drawing::revisions, behind an Arc as the
sheets are, so an undo step shares it; validated with the drawing; its ids among the drawing's ids
in use), in the order its rows were added, the newest last. Pending drawing format: revisions.

- drawing.revision.add {set?}: a row with the next revision, after the highest the drawing has
  given, and any texts given: one undo step.
- drawing.revision.edit {row, set: {revision?, description?, designer?, checker?, date?,
  hidden?}}: the texts as typed (a revision is one line) and what changed; a revision in letters
  with a letter the lettering skips is kept and warned about.
- drawing.revision.delete {row}: the row, and the tags it leaves showing the revision they had.
- drawing.revision.list: every row, the oldest first, and the revision a new row gets.

An id's text form (13 characters of lowercase Crockford base32) moves down to solidcraft_geom::ids,
with an option helper, so the revision record (geom) writes its row and tag ids as every drawing id
is written; solidcraft_doc::ids gives them on, beside IdSource.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Drawing revisions: listed by drawing.inspect, a table row keyed by its id's text, and a record per sheet tested (#3874, W31)

The rows show in drawing.inspect beside the sheets, as `revisions: {rows, next}`, from the same
function the revision commands answer with; drawing.revision.list goes, so a drawing's rows have one
place to be read. A revision table's row is keyed by its id as a file writes it, the one spelling
every drawing id has (a table's cell overrides name a row by its key). A record kept per sheet whose
rows keep its own rules is refused by the drawing, so that rule has a test of its own.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-30 00:22:51 -04:00