Commit Graph
38 Commits
Author SHA1 Message Date
DuBearteandClaude Opus 5.5 0752d8d79c Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543) (#5789)
* claim: #5543

* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)

A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.

merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 21:10:02 +00:00
DuBearteandClaude Opus 5.5 7804f9938a Intersection curves: a point that won't project no longer panics (#5562) (#5812)
* claim: #5562

* Intersection curves: a point that won't project no longer panics (#5562)

A quarter disc at a box's corner revolved 360 deg about the box's edge and
cut (a hemisphere whose pole sits on that edge) panicked in truck at
intersection_curve.rs:133: dividing one of the cut's intersection edges
met a point that projects onto neither surface, and the hinted
projection's fallback called subs, which unwraps that same failed
projection. The guard turned it into a failed cut and a crash report.

Now the leader's point stands in, the division stops there, and the
failure is recorded (truck_geometry take_projection_failure). truck-shapeops'
face division checks it after dividing an edge and gives up, so the
Boolean attempt fails as quickly as the panic made it and the kernel goes
on to its other tries: carrying the approximate points on instead made one
kernel test (equal bores crossing) run for minutes. On this design the cut
still fails with an ordinary error, leaving the box whole; nothing panics.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 01:56:23 +00:00
FrankandClaude Opus 5.5 fc3e3b6c8d Join: say so when the joined piece doesn't touch the body (#4434) (#4436)
* claim: #4434

* Join: say so when the joined piece doesn't touch the body (#4434)

A Join (extrude, revolve, sweep, loft, pipe, coil, primitives, thicken,
boundary fill, surface network) whose material meets none of its targets
still joins it to the first target as a separate piece. The result stays
as it was; the feature now warns: "the joined piece doesn't touch `Body1`,
so `Body1` is now in 2 separate pieces (New Body makes it a body of its
own)". History marks it and the command reply carries it.

The check compares pieces (outer shells, not voids) of the bodies the
feature changed or absorbed before and after it, so it holds for the
batched multi-profile path too, stays quiet for a join that bridges
pieces or closes a cavity, and leaves Combine (which joins the bodies it
is given) alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-24 04:13:31 +00:00
Artem Sushchev 30b01e8d79 A spherical shell revolves into a solid with a void, and cuts and joins with hollow tools work (#451) (#4182) 2026-10-23 22:53:42 +00:00
raykholo 17bac141c8 An intersect that would leave nothing is refused instead of deleting the body (#5295) (#5303)
* claim: #5295

* An empty intersect is refused instead of deleting the body (#5295)

An intersect whose boolean came out empty removed the target body and
reported success. The shared evaluator now refuses it when nothing of a
named target would remain, when nothing of any target would remain, or
when the tools meet a target and the result is still empty. An unnamed
target the tools miss altogether is still removed, as an intersect with
every body does (#5160). Sheet metal flat machining follows the same rule.

* Sheet metal: an intersect with already removed material is refused (#5295)
2026-10-23 13:50:47 +00:00
Yeonghun LeeandClaude Opus 5.5 316b49cd84 Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040)

A face's sketch fits an edge that is no line or arc (the quarter-ellipses
where fillets meet a slanted face) as splines a hair off the body's edges,
so a join from the face touched the body along a face it did not match and
failed with "boolean Union: no result" after minutes. When the profile is
a whole planar face of the one target, the join now sweeps the body's own
face, which shares its edges and is sewn on along it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040)

A cut from a whole planar face sweeps walls from each of its edges. Where
the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall
only touches the body along that edge, or lies in the face beside it, and
the boolean failed on it with "no result". The cut now keeps the walls that
go into the body, exactly (the body's own edges), runs the outline round
the others well outside the body, and starts a little out from the face.
A cut whose walls all only touch takes a slab beyond its depth plane.

Not covered: a cutting wall tangent to the face beside a touching one (a
round's wall meeting an end face, as in the issue's part); the boolean
still fails there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: leave a whole face outlined by lines and arcs to the profile's own tool

Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Run the whole cut tool from a face under the kernel guard (#2040)

Review: `builder::vertex`, `builder::line`, `Face::try_new` and
`builder::translated` ran outside `crate::guard`; only the sweep was
guarded. `cut_tool` now runs all of it under one guard.

Adds an end-to-end test of a cut into a face the body stands out past
below it (the block's top strip between its rounds): it takes only
what lies over the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test: the slab cut of whole_face_tool, on a spline prism (#2040)

A prism on a closed spline standing on a wider plate, cut 3 into its whole
top face: the slab takes the face's area times the depth and leaves the
plate alone. A test-only counter asserts the slab was the tool, so the test
cannot pass through the profile's own tool. Shortens the name of the
rounded block's top-face cut test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:41:41 +00:00
932d8d6b4f Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)
* Tessellation: trimmed faces of display meshes stay on their surfaces

Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Tessellation: one boundary rule for every mesh; drop the #1648 retry

A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Thread preview test: wait for the stale fit error to clear before the next preview

After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:49:45 +00:00
rlartotandClaude Opus 5.5 c64a611818 Boolean: fail an unverifiable intersection instead of keeping what it should trim (#3244) (#3344)
* claim: #3244

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Fail an unverifiable intersection instead of keeping what it should trim (#3244)

When every route of the general boolean fails, it falls back on the sampled answer
(one body whole, or nothing) with a "not verified ... that part is ignored" warning,
even when the bodies' facets cross well past their faceting error. For an
intersection that keeps exactly the material it was asked to trim: teeth standing
0.27 mm out of a trimming cylinder came back untrimmed, and `solidcraft-cli run`
exited 0 with a part 16.918 mm in radius.

An intersection whose sampled answer is contradicted by facets crossing by more than
twice the depth the warning reports (6 x the check mesh tolerance, three times the
faceting error of two meshes) now fails, and the model is kept. Cuts and unions keep
the fallback: shelling a body in two pieces relies on it (a cavity tool grazing the
other piece), with the same depth and ignored volume as this case.

Fixes #3244

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Leave an empty unverified intersection as it was (#3244)

Only a doubted intersection that keeps one body whole is refused. An empty
one ("the bodies are apart") stays a result reported unverified: the clearance
and interference checks rely on it, and main's new
a_pin_through_a_d_bore_of_its_size_still_overlaps_the_flat (#2714) expects it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:37:43 +00:00
Artem Sushchev ae2ab87b99 Cut: a body with a sealed void no longer comes out empty (#3175)
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.

In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.

The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.

Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
2026-10-20 10:30:13 +00:00
Erlis VidalandClaude Opus 5.5 9e15995a74 A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the
plate's top face) could come out of the general boolean with the target's face whole over the hole
and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume
shows it and the sampled membership checks see the hole either way, so the result was kept. The
result check now refuses a body with a planar face lying back to back on another of its own planar
faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:15:37 +00:00
Karl Von Richter 759e22b582 Try exact local cuts after invalid empty numerical results (#1765) (#1858)
Two empty numerical cut attempts stopped the boolean retry sequence before
the exact geometric strategies ran. When the result guard refuses that empty
candidate, the exact strategies (sliced planar, pushed walls, local prism,
sphere lens, seam halves) now try the cut first; if none recovers it, the
original empty candidate and diagnostics are kept, before any displaced
numerical retry.

Rebased onto main as one commit (the branch's own changes, its merges of main
dropped). The only conflict was the new engine regression test next to
main's #1985 STEP export tests in boolean_regression_tests.rs; both are kept.
2026-10-20 03:25:02 +00:00
Artem Sushchev 80719744cf Union: when the slab past pushed-apart coplanar faces can't be cut off, trim it by editing faces (#2801) 2026-10-20 02:11:23 +00:00
ee67ed53af STEP export no longer hangs on a box with a screw hole (#1985) (#2243)
* claim: #1985

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* STEP export no longer hangs on a box with a screw hole (#1985)

The export reads its own STEP text back, and meshing the read-back screw
hole never finished. On a seam cylinder the boundary walk projected points
to angles up to 5e7 rad apart and moved each by two turns at most, so the
11-point loop spanned millions of turns and the polyline closing it across
the seam had 4.3 million points. Each projected parameter is now brought to
within half a period of the point before it, whatever the gap.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* Second #1985 regression: the reporter's flanged enclosure

The issue's reporter delta-debugged a second design whose STEP export hung
on main: a flanged enclosure with two standoffs and no screw hole. It hangs
without the get_mindiff change and reads back with 29 faces and the same
volume with it. Both tests share the read-back checks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 19:14:01 -04:00
Artem Sushchev f5a868efda Fix red main after #2247: record its robustness seeds, and keep older designs' joins of split pieces working (#2540)
#2247 changed 16 robustness seeds (bodies N -> 1, and some seeds then build
different steps; seed 54's new shell fails on #2247's parent too). Recorded
on Linux.

Designs saved before #2247 that combined a split-off piece by name (tools
Posts, Posts (1)) failed on the missing piece and left both posts off the
case. A combine now skips a missing `X (n)` when `X` is a tool too or the
join's target, with a warning. Format note for the meaning change.
2026-10-18 13:10:09 -04:00
Artem Sushchev a4c4b411e5 Combine: a cut keeps a body joined from separate pieces in one body (#2247)
Thanks @H1D.
2026-10-18 06:02:44 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Mateusz Sych 4a70c03deb Revolve: a profile that comes back to the axis along a curve revolves right, and cuts with it work (#1853) (#1866)
Thanks @SychPL.
2026-10-17 13:38:41 -04:00
fkirill f480898158 Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill.
2026-10-17 13:33:21 -04:00
fkirill 2c924fd385 Sweep: close circular tools before cutting a torus (#2005) (#2010)
Thanks @fkirill.
2026-10-17 12:46:21 -04:00
NOWN-DEV 40abcbc8cf Booleans: prism cuts whose walls only touch the target are exact (#1894)
Thanks @NOWN-DEV.
2026-10-17 08:00:06 -04:00
Mateusz Sych 7f2ae11a06 Regression test: a box intersect splits the end off a raked wedge after its end rounds (#1617) (#1862)
Thanks @SychPL.
2026-10-17 04:07:50 -04:00
Irakli Kourtis f57a62deb7 Intersection edge nodes advance along the curve at fine display qualities (#1615)
Thanks @jyviko.
2026-10-16 03:00:56 -04:00
bherbruck 762b6fe934 Extrude Cut of a whole face beside round corners: grow the arcs too (#1275) (#1401) 2026-10-15 10:27:22 -04:00
Que 1cc65cbc91 fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)
fix: a lip swept flush around a rounded rim joins the body it sits on.
2026-10-14 18:49:45 -04:00
bherbruckandClaude Opus 5.5 27374ca289 test: hold the enclosure lid's press/pull to CPU and memory, not wall time (#1027)
press_pull_on_the_enclosure_lid_is_prompt took 61-87 s of wall time on loaded runners against a 60 s bound, for about 9 s of CPU. It now checks the operation's CPU time (under 300 s) and how far it grows the peak memory (under 1 GB; the runaway it guards against passed 24 GB), from /proc/self where the system has it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 07:38:53 -04:00
bherbruckandClaude Opus 5.5 8fb5742706 fix: imprinting a partial contact boxes faces by their control points (#929)
#825 chose the faces to split by boxing each face, dividing its curved edges down to the contact tolerance; on the sensor enclosure's lid that division never finished (press/pull and extrude on 18 faces grew past 24 GB and timed out in the action matrix, on CI as here). The boxes now come from the edges' control points, with no division; a face whose extent can't be found counts as near. A test holds the lid's press/pull to a time budget.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 20:52:35 -04:00
selune 293d660d6c fix(kernel): preserve intentional Split Face lines in contact joins (#782)
Intentional Split Face lines survive a join with partial planar contact, so the far face stays in two pieces. Follow-up to #704 / #674.
2026-10-13 12:46:34 -04:00
bherbruckandClaude Opus 5.5 add4a18961 fix: fuse bodies that touch back to back over part of a face (#679, #674) (#704)
Two L's extruded up and down from one 2 x 2 grid now join into one solid (the planar rebuild gives each fan of faces around a pinched vertex its own vertex copy), and a pad whose end lies half past the edge of the face it stands on fuses exactly: contact faces are imprinted with each other's outline and the common faces glued away, still held to the retry guard. Face splitting handles a line crossing an edge twice; glue matches differently parametrised curves and keeps several pieces apart. Robustness seed 16 now fuses with the exact volume.

Fixes #679, fixes #674.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:02:44 -04:00
bherbruckandClaude Opus 5.5 29258767ce fix: refuse Boolean retries that change the part away from the tool (#616) (#644)
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 07:10:29 -04:00
Jonas Wrede 4a86ad5a7c fix: extend a cut or join tool only past an end that lies on a target face (#545, #544) (#609)
An extrude cut or join only extends its tool past an end that lies on a target face, and by less than half the way to the next face level, so a tool can no longer cut through a thin floor beyond an end that touches no face. Un-ignores the #545 and #544 regression tests. Fixes #545.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 04:26:07 -04:00
bherbruckandjonaswre 1abd989a67 test: land the remaining ignored regression tests from #548-#573 (#582)
Ignored regression tests for #530, #531, #541, #542, #545, #547 and #570, from #548, #549, #550, #552, #555, #573 and #572.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 02:51:12 -04:00
Jonas Wrede 7a8754bef7 test: failing regression test for #544 (ignored until fixed): Blind Ø2 hole into a long D-profile bar is refused ("exact fallback … takes planar faces only") although it stays clear of the round face (#551)
Adds an ignored regression test for #544; it runs once #544 is fixed.
2026-10-13 02:28:12 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
f525704192 test: failing regression test for #268: Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall (#283)
* test: reproduce #268 (Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall)

* Sew refuses edges whose ends weld to one vertex (#268)

The sewer welds vertices on a 1e-6 grid but only rejected edges shorter than
1e-9, so a sliver edge between the two welded its ends into one vertex and
truck-topology panicked ("Two same vertices cannot construct an edge") inside
the guard. Such an edge is now a degenerate-edge error before any truck call,
and the boolean takes its usual fallback.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:18:24 -04:00
CypherNaugh_0xandClaude Opus 5.5 3086c32a9a A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked
The loft's top lies in the pocket floor. truck's boolean cannot take coincident faces, and the exact polygon fallback (planar_boolean) only takes bodies whose faces are all planar, so the hole's cylinder ruled out the only path that handles this cut. planar_boolean now first tries a sliced form: when an axis-aligned slab holds the tool and none of the body's curved faces, the body is split on the slab's planes (planes clear of the body's own faces), the planar middle piece takes the exact boolean, and the pieces outside are glued back on along the cut faces (the middle piece is healed first so its edges match theirs). Pieces in several parts are refused rather than glued into one shell. split_by_plane's half-space code is now ops::half_space, which this uses.

Tests: loft_cut_beside_a_round_hole replays examples/regressions/loft_cut_beside_round_hole.json and checks the exact volume (slab - pocket - prismatoid - hole; fails on main). With the hole made after the loft, the body is the same (volume, area, 19 faces, 42 edges).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 5249ae84ef Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back
Moving a body transforms its intersection-curve edges, and truck-geometry 0.5.0 scales each curve's tolerance by the operator norm of the matrix. matext4cgmath 0.1.0 computes it from eigenvalues through a quartic whose Newton refinement loops while the residual is above a tolerance and never gives up. For a translation matrix all four eigenvalues are 1, and near that quadruple root the iteration can cycle forever (about one translation in eight of the boolean retries' shifts, by a scan of sizes 0.1-2000 mm). matext4cgmath is vendored with both Newton loops stopped after 100 steps (vendor/README.md, ATTRIBUTION.md).

truck master no longer computes the norm in transform_by, so the vendored copy can go once a truck release after 0.5.0 is adopted.

Tests: moving_a_body_with_an_intersection_curve_edge_ends (kernel) cuts a cylinder with a tilted box and moves the result by one of the shifts that hung (hangs on main). examples/regressions/oblique_cut_of_cylinder_hang.json is the variant of the oblique cut that hung the app; it hangs on main, and since the previous commit it passes without reaching the shifted retries, so it is replayed by the engine test as a scenario only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 f3a689f284 A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)
The boolean checks its result by meshing both operands and the result, then sampling membership densely where the operands' boxes overlap. The mesh step came from the larger body's size (0.46 mm here), which facets the bar's 3 mm arc so coarsely that two meshes of the same arc disagree over a few percent of the thin overlap box, and a correct cut failed the 0.4 % mismatch limit. The step now also follows the smallest side of the overlap box (2e-3 of it), never finer than 1e-5 of the size, so it only changes where the bodies meet in a region much thinner than they are. truck's first result for the cut is then accepted, and it matches a split of the bar by the tilted plane.

Tests: oblique_cut_through_a_small_arc_matches_a_split replays examples/regressions/oblique_cut_of_cylinder.json and compares with solid.split_body by the same plane (fails on main). The full suite runs no slower.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 f17ff913d6 A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"
heal_keep evaluated the result's intersection curves outside any guard. truck panics where such a curve no longer evaluates, and the panic escaped boolean_whole, so the retries and fallbacks that would have succeeded never ran. heal_keep now runs under guard and returns the solid unhealed when healing panics (as its doc already promised for failures), and the boolean builds its result body under guard too, so a result that cannot be built counts as a failed attempt.

Tests: shallow_loft_cut_from_the_top_face replays examples/regressions/shallow_loft_cut_from_top_face.json and checks the exact prismatoid volume (fails on main with the panic).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00