Commit Graph
3176 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 7952516eb4 doc: sweeps along linked and planar curves follow the exact curves
A sweep path through 3D sketch curves sampled every planar sketch curve in it
into a 0.01 mm polyline, and took every linked 3D curve as the points its link
stored, so SMLib got a many-cornered polyline (and refused a smooth one). Now:

- a planar sketch curve in such a path is its exact segments
  (PathPiece::Segs of PathSeg::of_sketch over exact_segs);
- a linked curve whose source has an exact curve keeps it: Wire::exact holds
  the record curves (WireCurve: schema 4 curve + interval) end to end along the
  wire, set with the wire when the link is resolved: an included body edge its
  record edge (kernel::brep_record), an included sketch curve leaving the plane
  its segments (kernel::sketch_record_curve). Wire::map carries them with a
  placement. The sweep follows them through kernel::curve_path (line, arc,
  ellipse as rational quadratic spans, polyline, B-spline as Bézier spans).
- curves known only as points (projected onto a face, intersection and iso
  curves: the link resolves them on the mesh) stay points.

Kernel, for the sheet and blend ports: planar_face_record (a profile face as a
schema 4 sheet record with exact pcurves), smlib_sweeps::chain_curves (a
segment chain as SMLib curves), body_from_record (any record into SMLib,
checked), sketch_record_curve; record curves from design files are checked in
curve_path. Format: pending/wire-exact-curves.rs.

lib.rs (coordinator): export SpaceBezier, curve_path, edge_path,
sketch_record_curve and planar_face_record from the kernel.
(not built: base in progress; kernel and sketch check clean, doc not reachable)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 33cfa34d41 kernel: path segments hold any rational Bézier span, and edges as paths
PathSeg::Bezier(SpaceBezier) replaces PathSeg::Cubic: a rational Bézier span in
space of degree 1 to 9 (homogeneous control points), so a drawn spline's cubic
spans and an edge's own curve are one kind of segment, swept by SMLib as the
NURBS it is. SpaceBezier evaluates, differentiates (quotient rule on the
hodograph), measures and walks by length (Gauss-Legendre), reverses and maps.

edge_path gives a body edge's record curve as path segments exactly: a line,
an arc, an ellipse as rational quadratic spans, a polyline's lines, a B-spline
as its Bézier spans between knots (bspline::segment); an intersection curve
(no exact curve in the record) is refused. PathPiece::Segs carries such exact
curves in a point path; PathSeg gains reversed, mapped (a placement) and
of_sketch (a sketch segment on its plane). The cubic_* helpers are deleted.
surfaces.rs: its one PathSeg::Cubic arm follows the rename.

lib.rs (coordinator): export SpaceBezier and edge_path from point_path.
(not built: base in progress; cargo check shows no error in these files)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 0a216d6925 kernel: extend on SMLib: the surface's own extension, up to a target by trim, to bounds by untrim
extend_surface keeps its signature, options and error messages. One model:
SMLib extends the surface past a side of the face's parameter box
(smlib_extend_sheet, CreateExtendedSurface: natural continues the end spans,
tangent G1, curvature G2) and the face stays one face on it, tagged so the
face is Modified and its sides keep their edges. Several picked sides grow
the box on each. Up to a target, the face is extended 50 body sizes past
its edge and trimmed back with trim_keep (SMLib's exact intersection),
keeping the piece the face lies in. Back to the bounds is untrim of the
picked edge's face, in place, with its holes; one already there is
refused. A plane's straight edges with neighbours lengthened still go
through surfaces::extend. Edges are picked on the schema 4 record (samples
of each edge's curve), an edge two faces share or of a hole refused as before.

Not ported (every far edge there was a cubic fitted through marched
samples, which the exact-B-splines rule forbids): an edge that is not a
whole side of its surface's box (trimmed edges, curved planar edges such as
a disc's, a notch), mitred corners on such faces, sides run square to the
edge on a non-box face, and bodies of more than one face. These now answer
"not supported yet: ...". Tangent and curvature no longer add a separate
run-off face: SMLib's G1/G2 extension is one face (the engine's
surface.extend description says so).

Tests ported keeping their assertions: the planar extension, the cylinder
strip along its axis, around and both (now an extruded arc, not a truck
revolution), the extruded strip, the parabola extended naturally (now a
conic extruded), back to bounds (the saddle from loft_sheet and trim),
hostile requests. Deleted, as what they test no longer exists:
neighbours_lengthened_or_square, self_intersecting_extensions_are_refused,
a_disc_grows_by_its_curved_edges, neighbouring_faces_extend_together, the
tangent/curvature run-off half of the B-spline test, and
a_continued_bspline_is_unchanged_on_its_range (the deleted continue_span).

SMLIB_REV: fork 9531966 (tags carried through untrim and extend).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 7bbdd37130 kernel: untrim on SMLib (smlib_untrim_face), its history from SMLib's tags
untrim keeps its signature and messages. The face is picked in SMLib by a
point inside it (the centre of its largest mesh triangle), holes by their
points; SMLib deletes the holes or rebuilds the face over its surface's
parameter box with the holes kept (fork c6c7fb4). The body goes tagged as
operand 0, so faces and edges come back with their origins; the untrimmed
face is Modified. A face whose span goes all the way round its surface now
closes on the seam instead of being refused.

solidcraft-smlib: Brep::untrim_face (ffi/trim.rs, trim.rs) and
Error::NotExact for SMLIB_ERR_NOT_EXACT.

Tests: ported to the record (loops counted on brep_record; the saddle made by
loft_sheet and trim instead of truck types; the torus face copied out by a
point). Deleted: the_outer_loop_is_found_whatever_order_the_loops_are_in: it
built a truck face listing its hole first; SMLib's import always puts the
outer loop first, so the case no longer exists.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 22734a55f9 kernel: trim on the record: split, side by the tool's field, pieces removed
trim / trim_keep / mutual_trim keep their signatures and behaviour; the
truck walk over the split solid is gone. The body is split where the tool
meets it (splitface::split_any), each piece's side is the tool's field at
the centre of its mesh triangle where the field is largest (the record
mesher), regions come from splitface::regions, and the pieces not kept go
through remove_faces, whose history record::after carries back to the
body. A mutual trim's nearest boundary edge is found on the schema 4
record: edges one face uses once, their middles through CurveEval.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 065e61ec7b kernel: Body is its schema 4 record, with its SMLib body made once
A solid body holds its record (canonical faces, edges and vertices are the body's everywhere) and
builds its SMLib body from it on first use, or keeps the one the operation made. Queries read the
record: planar faces, outline and exact bounds, counts, closed shells, lumps from its material
regions (record parts, with their history), shell nesting from its regions. The orientation mesh,
the revolved-face rephasing, kept tolerances and the old kernel's mesh caches are gone. History's
edge faces come from the record's edge uses. The kernel no longer depends on the old kernel's
crates; SMLib's crate is a plain dependency (without the smlib feature it answers not built).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 166bfbacd4 brep: records of bodies apart from each other join into one; islands stay inside their voids
compound concatenates the records and takes the part of all their material, so the result is
in canonical order with each face, edge and vertex numbered from its input. part now keeps an
island inside a void when both its region and the void's material are taken.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 66e31bede8 kernel: CornerPatch exported with the G2 corner patch
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 291af4bdbd kernel: the plain and crowned patch on a loop of the body's record edges, built by SMLib
patch_loop picks the closed loop among the record's edges, certifies a plane (lines by
their ends, splines by their control points, conics by centre and tilt, traced curves by
a planar support) or fits the height field, and assembles one face on the body's own edge
records; the height field's parameters are plane coordinates, so each line or spline
edge's pcurve is its exact projection (segmented to the edge's interval). The history
marks the face generated and each edge the body's own. A fit on circular, elliptic or
traced edges, whose pcurves on the spline have no exact form, is refused by name, as is
the general fill (G1/G2, points, loops bounding no height field) until it is ported.
Tests ported to the record; the general-fill ones stay and fail until then.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 8db1402807 kernel: the G2 corner patch is a record surface with its seams as intervals of its boundary line
corner_g2_patch builds the same tensor patch and returns CornerPatch: the B-spline
surface record, its v = 0 boundary line (the net's first column on the same u knots)
and each side's interval of it, so the seams lie on the patch exactly without cutting
the curve. The fold check and seam_error read the record surface through SurfaceEval.
Tests ported (the rolling ball is a sphere record).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e010188390 kernel: seam continuity measures the body's record
Edges, the faces each bounds and each face's outward side come from the schema 4
record; stations on the edge's curve (CurveEval::derivs for its tangent) are projected
onto each face's SurfaceEval, and the normal curvature across the seam is read from the
surface's exact second derivatives (SurfaceEval::second). Behaviour, budgets and
messages unchanged.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 748d9f25ed brep: CurveEval::derivs, a record curve's point and first derivative
Lines, conics, polylines and splines in closed form; a traced intersection has none.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f9f59d8269 brep: SurfaceEval::second, a record surface's exact second partial derivatives
Closed forms on cylinders, cones, spheres and tori; on a spline the basis functions' own
second derivatives (local_basis) through the quotient rule for the weights; zero on a
plane. A revolution has none (its profile evaluator carries first derivatives only).
The seam continuity measure reads normal curvatures from them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 1d289dfd63 kernel: fairing works on record curves and surfaces; fair_faces rebuilds through SMLib
fair_bspline_curve/_surface and fair_nurbs_curve/_surface take and give the schema 4
record's Spline and RationalSpline kinds (the weights kept, the knots unchanged).
fair_faces fairs the picked faces' surfaces in the body's record, keeps its loops,
edges, vertices and pcurves, and has SMLib build the body; its history marks the
faired faces modified and every edge kept when SMLib keeps the record's order, and is
left off otherwise. Tests ported to the record types with their assertions.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 8d844f715c kernel: sew assembles a schema 4 record and SMLib builds the body
The faces' descriptions become a record with exactly the topology they give: vertices
and edges shared by key (lines, circles or flat arcs as their exact rational quadratic,
Bezier chains as B-splines), planes about the boundary's mean, revolved lines as
cylinders, cones or planes, extruded arcs as cylinders, ruled walls as B-splines with
exact iso-line pcurves. assemble() groups faces into shells, puts closed shells in
regions (a cavity where the outward normals enclose negative volume, in the solid whose
winding number about it is one), orders everything canonically and validates it.
SMLib imports the record as trusted; the body and the face each body face came from
follow SMLib's order. The edge-sheet and vertex-fan logic for touching bodies is kept.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c748aeabfa kernel: crate root follows the emboss, lip and delete-face port
assemble (records rebuilt after removing and adding faces) joins; the boolean guards that re-ran
a failed boolean with a changed tool (bore_guard, candidate_reach, sphere_lens, tangent_cylinders,
touching_walls) are gone; the lens-cut result stays as a boolean test. SMLIB_REV at the fork's
integration head with smlib_merge_faces.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5aec7a7d1b kernel: healing through SMLib's merge of faces; the boolean retries deleted
heal: a body's faces on one surface merged and its edges on one curve joined by SMLib
(Brep::merge_faces, SmBrep::RemoveTopologicalEdgesAndVertices), the edges along its split lines
kept, with SMLib's history over the body. Its booleans already end the same way
(SmMerge::BooleanPostProcess). The truck healing is deleted with what only it did: coplanar and
collinear merges by hand, flat surfaces rebuilt as planes, and approximate edges refitted as
lines or arcs from samples. on_split_line stays; edge_points reads a record edge.

Deleted, with no port: the retries around the old boolean's failures (touching_walls,
bore_guard, tangent_cylinders, sphere_lens, tool_reseam, candidate_reach). Each re-ran a failed
boolean with a changed tool or split faces; SMLib's boolean is the one path, and a case it
fails is its defect to fix there. Their own tests go with them (the helpers' unit tests in
issue_788_tests, bore_union_tests, candidate_reach_tests, and sphere_lens' relaxed-tool test);
the #2750 lens cut's result test stays, as a boolean test, without the retry diagnostics.
Heal's tests built truck prisms and a truck spline edge: deleted.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 3bd1cc5349 solidcraft-smlib: Brep::merge_faces, SMLib's removal of topological edges and vertices
The wrapper of the fork's smlib_merge_faces (SmBrep::RemoveTopologicalEdgesAndVertices): faces
on one surface meeting along an edge become one, edges on one curve meeting at a vertex nothing
else uses become one, and the edges under the given points stay. SMLIB_REV moves to the fork
commit that adds it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9f71e93e28 kernel: Delete Face with healing on the schema 4 record
The neighbours of the deleted faces are rebuilt from the body's record: each keeps its own
plane (every moved corner lies on it) and its edges away from the gap; corners on the gap move
to where the neighbouring planes meet, and the gap closes with straight edges shared between
the rebuilt faces. Moved and restored edges are recorded as pieces of the edges they replace
(assemble.rs: Assembly::piece), so the history is as before: untouched faces kept, neighbours
modified, edges kept, pieces of their edges, or where their faces meet.

Test deleted: delete_pocket_keeps_an_imported_face_around_it bowed the edges of a truck body in
place to show that a face losing only whole loops keeps its surface; a record body has no such
in-place edit, and every rebuilt face now keeps its own surface.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 ed78b82008 kernel: raising a band (lip) and its rim profile on the schema 4 record
The band is built on the body's record: the face keeps its other loop and the band's edge, the
walls rise along the face's loop (continuing the walls below) and along the band's edge
(planes along lines, cylinders along arcs), and the band's top is the face's plane moved up.
Each face is given with its outside, so no orientation is tried: the eight flips the old
construction tried in turn are gone. rim_band reads the loop's lines and arcs from the record.
History as before (the trimmed face, each wall from its loop edge, the top an offset).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 624f6d6da7 kernel: emboss on a cylinder builds on the schema 4 record; any pick on the wall is accepted
The emboss is built from the body's record: the wall's face loses the profiles' footprints,
each profile adds planar walls and its cap on the wall's cylinder at the new radius, and SMLib
builds the body from the finished record (assemble.rs: a record taken apart and finished again
in canonical order, pcurves from the record's routine for new uses, the record's own for kept
ones). surf_of and with_same_surface read the record's analytic surfaces; the topological
offset and draft that only the old kernel used are deleted (SMLib's offset faces and draft in
offset_backend replace them).

#3782: the saved pick had to lie on the half of the wall the sketch is tangent to (its angle
inside that face's span). The wall is every exterior cylindrical face of the body (a stepped or
interrupted cylinder is refused before), so the pick is checked on the cylinder between the
endcaps. The sleeve test's far-side pick now succeeds; a pick on the bore is still refused.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 a46874f89d brep: part of a record, a material region with its voids, in canonical order
A lump of a body is the part of one of its material regions: its outer shell, its open and wire
shells and a void for each closed inner shell, renumbered in the record's canonical order, with
the source index of each face, edge and vertex for history. Islands inside those voids are parts
of their own. Read from the regions the record already holds, with no mesh or ray test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 9268a1e881 solidcraft-smlib: SMLib's "no change" as Error::NoEffect, the fork pinned at its integration head
The fork's shims now hold an operation SMLib reports done to having done
something (SMLIB_ERR_NO_EFFECT, -1107: a blend that made no face, a face
move or draft that moved no face). It maps to Error::NoEffect, and the
kernel says "SMLib made no change: ..." for blends and for offset, shell
and draft. Case 1080 (chamfer over openings) returned an unchanged body
as success.

The fork pin moves to 6bb2938: the chamfer side fix of the piecewise
merge, the no-effect contract, and SmStatus marked must-use with the
dropped statuses of the shims and of the fillet, boolean, offset and sweep code passed on.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 cbf28a4fd0 kernel: the prism boolean modules are gone from the crate root
The prism port deleted the second boolean route (prism_local, prism_lineage) and the planar
boolean; SMLib's boolean is the one.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 877f8acb6f kernel: the faceted boolean is SMLib's boolean with the mesh made a polyhedral solid
faceted_boolean (a body with a closed triangle mesh) faceted the body's curved faces and ran
its own BSP polygon boolean, then rebuilt a truck solid. It now builds the mesh into a
solid: each run of coplanar triangles sharing edges (corners within `tol` of each other's
planes) one planar face, its boundary chained into loops (split where a loop passes a vertex
twice, holes given to the innermost outer loop), sewn with sew_touching; SMLib's boolean
takes it with the body, whose faces stay exact. The history over [a, mesh] is the boolean's
over [a, tool] with the tool's own over the mesh substituted: each tool face from its
triangles, each tool edge the meeting of the runs either side.

Deleted with the BSP and the rebuild: planar_boolean and sliced_planar_boolean (the truck
boolean's exact fallback for touching planar faces: on SMLib the boolean is one path),
reassembled and split_beside (prism_local's), components_in_order (truck shell order) and
the tests of what no longer exists (face_planes diagnostics, the planar fallback beside a
plate's small rounds).

lib.rs (coordinator): `pub use polybool::faceted_boolean;` (planar_boolean is gone).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 42c41464aa kernel: planar regions stay one 2D arrangement; prism booleans are SMLib's boolean
The prism module kept two things: the 2D arrangement of planar regions
(planar_regions_boolean, and extrude_planar_regions, which normalises the material with it,
proves the pieces apart and extrudes them with crate::extrude, SMLib's extrusion with its
face sources), and a second route to the solid boolean: prism operands read section by
section, the result sewn and its history rebuilt from section tags (prism_boolean,
prism_union_between_caps, the stacked and free-form variants, prism_lineage.rs) and the
column-local variant (prism_local.rs). On SMLib a boolean is smlib_boolean, with SMLib's
own history: the second route is deleted, with its tests (prism_spline_tests.rs, the
stack/prism tests in planar_tests) of what no longer exists.

The section tags shrink to what the arrangement uses: the free-form segment a fitted arc
stands for. wall_along reads a record surface (cylinder, revolved line, spline net) for
clearance.rs. The 2D tests and the wall test keep their assertions.

lib.rs (coordinator): drop `mod prism_local;`.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 6a68571242 kernel: certified prism comparison reads the schema 4 record
certified_prism_equivalent proves two bodies the same uniform prism from their records
(crate::native::brep_record): caps are the planar faces square to a candidate direction,
their outward side from the shell's oriented faces, their loops run about the outward
normal and read by prism_curve; walls are planes, cylinders (their axial extent from the
face's domain), revolutions of a line or ruled spline nets, each bounded as before. The
interval arithmetic, loop matching and separation proof are unchanged. Tests build their
altered bodies by editing the record (a wall's surface swapped or moved, a cap plane's
origin moved far away) instead of truck faces, with the same assertions.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 da24f8ae29 kernel: prism curves are read off schema 4 record edges
prism_curve::segment and ::projected take a Run (a record edge's curve over its
interval, run one way, with the vertex points it must reach) instead of a truck edge.
Lines and circles are read exactly as the record holds them; a polyline as its lines; a
B-spline or NURBS curve span by span (clamped to the interval with Boehm insertion, then
split into Bezier spans), certified by the existing whole-span Bernstein proofs; an
ellipse as its exact rational quadratic spans of at most a quarter turn. segment_fitted
(arcs fitted to a spline, only the prism boolean's free-form route used it) is deleted.
The existing tests run on record curves; the part of the aliasing test that asked the
deleted prism boolean to decline is dropped.

Callers in body.rs, bore_guard.rs, sphere_lens.rs (other owners) build a Run with
prism_curve::Run::of(record, edge, forward) or Run { curve, interval, forward, ends }.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fa3d914af6 kernel: SMLib measures mass properties at its documented 1e-4
measure_backend asked SMLib for mass properties at 1e-8, the finest its
integrator allows and below the range SmApiBrepComputeMassProperties
documents ("Relative accuracy, clamped to [1e-4, 1e-1]", SmApiQueries.h,
whose cost is "governed by dRelativeAccuracy"). The tight request was there
because the documented range did not hold on faces bounded by circles
(KNOWN_ISSUES.md); the fork's dcbb07d integrates each trim-curve knot span
on its own, and such faces now meet it (a cylinder's volume 1.8e-6 off at
1e-4). At 1e-8 SMLib's measure was most of the regression rig's time on a
modelled thread (threads/602).

The measure now asks 1e-4: ten times inside the 1e-3 it is held to (AGREE
against the mesh measure, and the rig's volume and area tolerance). NURBS
spheres and tori can still miss 1e-4 by a small factor (tangency-labs/
solidcore#384; a torus's volume 2.5e-4 at 1e-4), inside that 1e-3.
Brep::mass_properties keeps MEASURE_ACCURACY (1e-8) as its tests' default.

SMLIB_REV: the fork at dcbb07d.

Not built: base in progress (kernel-smlib/no-truck 52f25ca3 does not build).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 b0cc84b287 brep: a record moved rigidly, exactly
A rotation and a translation move every point, axis and control point and leave parameters,
pcurves, tolerances, orientation and the canonical order as they are: the same B-rep in other
coordinates. Placing a body (assembly instances, patterns) no longer needs a kernel round trip.
Reflections and scalings change parameters or geometry kinds and go to the kernel.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 3ca3638c59 kernel: the curve, loop and vertex blend modules are gone from the crate root
SMLib's blend builds rolling-ball rounds, corners, loops and vertex spheres in one call; the
modules that built them on the old kernel were deleted by the blends port.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 b11433bc57 kernel: smooth display edges classified on the schema 4 record
A join is hidden when both faces are clamped Bezier B-spline surfaces swept by one
linear translation (read from the record's spline net, the face's side from its shell)
and the edge is a straight line on a ruling of both, their normals agreeing within the
certified angle, as before. The edges are the record's, in the order the mesh has them.
Tests take the record (a closed edge's equal end vertices, the ruled face by its spline
net, ruled() on record control nets); the case that bowed a truck edge in place is
removed (a record edge cannot be changed under a body).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f860488794 kernel: the rolling-ball, corner, loop and vertex blend builders are gone
curveblend.rs (rolling-ball rounds and chamfers of curved edges, their corners, the law
and chord variants), curvecorner.rs, loopblend.rs (blends round whole face loops) and
blend_vertex.rs (a sphere at three rounded edges) built blends on truck; SMLib's blend
makes all of these in its one call, with its own corners. curvecorner_tests.rs tests
fillet and chamfer through the public functions only, so it stays, mounted from blend.rs.
curveblend_tests.rs and curveblend_law_tests.rs go with the builder: they test its
internals (fit_sections, curve_blend_with_limit, ROLLS, its NURBS surfaces and contacts).

lib.rs needs `mod curveblend;`, `mod loopblend;` and `mod blend_vertex;` removed.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5c7381bc57 kernel: variable and chord fillets on SMLib, the taper's room on the record
fillet_variable, fillet_variable_points and fillet_variable_spline round the edge with
SMLib's variable-radius solver (smlib_fillet_variable) on any edge; fillet_chord is
SMLib's constant-chord round (smlib_blend, SMLIB_BLEND_CHORD). On a straight edge
between planar faces a radius law whose band runs past the faces at any of 256 stations
is refused as too large before SMLib runs, as before. The edge setup, the band check and
the taper's room read the body's schema 4 record: planar faces' outward normals, the
directions into them, side edges' exact tangents at the ends; a curved boundary is
divided to within the clearance for the containment test. RadiusSpline evaluates with
the geometry crate's B-spline basis.

The truck variable-radius surface builder and the rolling-ball law and chord blends are
gone. taper_mesh_tests keeps its mesh-accuracy test; its three tests of truck's mesher
on a surface with an arbitrary pole are removed (that mesher no longer exists).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 fd6fdfccef kernel: fillet_radii rounds every edge at its own radius in one SMLib blend
The corner builder (one, two or three rounds at a vertex of planar faces, taking earlier
rounds off and blending them again) is gone: SMLib's blend makes those corners itself,
with each edge's radius. The tests check through the record (curved faces' normals along
their shared edges, vertex points, planar faces' vertices on their planes). Removed: the
assertion that a concave edge meeting a convex one is refused, a limit of the deleted
builder.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 bb16707688 kernel: fillets and chamfers run on SMLib, their fit checked on the record
fillet, fillet_each, fillet_g2, chamfer and chamfer_sides blend every picked edge in one
SMLib call (smlib_blend / smlib_chamfer_sides), which builds the rounds, their tangent
chains and the corners where they meet. The #1080 fit check (blend_fit) reads the body's
schema 4 record: planar faces' outward normals, the direction into a face across a
straight edge, edge tangents at the ends. It now runs before SMLib, so a blend that runs
past its faces is TooLarge with the largest size that fits (fillet_max_each, the taper
and the doc's reduce path rely on that), and the volume and wrong-way checks after it.
fillet_max_each groups the edges by their faces and ends in the record. fillet_g2_corners
is refused: SMLib's corners are a sphere or a Coons patch, not G2.

The local truck blends, their reorder search and every truck helper they used are gone.
Tests: blend.rs's tests call fillet/chamfer instead of the deleted internal `blend`; the
assertions on the deleted quintic construction's surface and curve parameters and on
extension_fits (deleted) are removed, the analytic volumes kept.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c29845f400 kernel: shell, offset, boolean and sweep notes say SMLib is the kernel
The module notes of offset_backend, smlib_boolean and smlib_sweeps no longer
speak of a kernel switch or another kernel's behaviour; sweep_path's tests
formatted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e0f57ff877 kernel: extrude, revolve, primitives, lofts and sweeps on SMLib only
Every builder in build.rs keeps its signature and is SMLib's: extrude and
extrude_whole_sides (smlib_extrude), revolve and revolve_whole (smlib_revolve;
SMLib makes one face per profile segment and cap, so the two agree), the
tapered extrude (smlib_extrude's draft), loft, loft_with_rails, loft_regions
(smlib_loft, smlib_sweep_stations for rails), sweep and sweep_with
(smlib_sweep / smlib_sweep_placed, controlled ones smlib_sweep_stations). Box,
cylinder and torus are built through those, keeping their face sources and
history; sphere is SMLib's own (smlib_make_sphere), each face from the half
disc's arc as before.

Deleted: every face-by-face build (tsweep/rsweep shells, the revolve-on-axis and
touching-axis builders, poles, reseams, the healed whole revolve, the six-patch
sphere and its rotated variant, the tapered side faces, cap_and_close,
close_sweep, the full-circle sweep), and the taper's crossing pre-check and curve
splitting that only that path used (offset_crosses, offset_splits,
offset_error, offset_tolerance). Wire, loft-face and interpolation helpers other
modules still build on stay until those are ported.

(not built: base in progress; cargo check shows no error in this file)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 e96b7d6cbb kernel: solids swept along 3D point paths on SMLib only
sweep_path_with is SMLib's sweep along the path's lines (smlib_sweep_points
through sweep_with, corners mitred). Deleted: the B-spline walls fitted through
sampled stations (smooth_walls, smooth_closed_walls), the ruled walls between
stations (ruled), and the helpers only they used (rotated_wire, start_cos,
swept_volume). The open walls of chains (ruled_sheet, smooth_sheet) stay for
surfaces.rs's sheet sweeps until those are ported.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 c4bb4a3529 kernel: a cornered sweep carries on from where SMLib placed the profile
Brep::sweep_placed (smlib_sweep_placed, fork f6f428b) returns the rigid motions
carrying the profile onto the sweep's first, middle and last sections. Each run
of a path with corners now takes its end pose from the last motion (less the
straight lead-out along the end tangent) and its inside seeds from the middle
one, for every path segment kind: the 3D sketch spline next to a corner is no
longer refused. Deleted: the predicted carry along a run (carried) and
point_path::cubic_split, which only it used. SMLIB_REV at f6f428b.

Fork: build + ctest, only smlib_flat_roundtrip's known incline failure.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 a5634078ef kernel: convex polyhedra, shell, draft and offset faces on SMLib only
convex_polyhedron builds its schema 4 record straight from the planes (corners
at triple-plane intersections, line edges, planar faces with exact line pcurves,
canonical order) and SMLib takes it (Brep::from_record, trusted) and checks it.
shell, draft and offset_faces are SMLib's local operations (smlib_shell,
smlib_draft, smlib_offset_faces through offset_backend).

Deleted: the half-space shell and draft of convex bodies, the planar-offset
cavity shells (barrel, opening overreach, opening sweep), the non-convex draft
walls, the split-piece press after a failed offset, round_all_edges and the
helpers only they used, and the test of the deleted rim pre-check
(rim_preflight_tests).

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 2b77f09f86 kernel: helical sweeps and lofts to a point on SMLib only
sweep_helix is SMLib's screw sweep (smlib_screw_sweep) and loft_to_point SMLib's
loft to a point (smlib_loft_to_point), with their checks and history as before.
Deleted: the B-spline walls fitted through sampled stations (smooth_helix), the
ruled walls between stations and the face-by-face pyramid, and the Pappus
estimate only they used.

(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 2d3d0a081b kernel-cases: a join that meets nothing keeps the tool as a lump (#2896)
The case expected two bodies for a combine join of an arm 0.01 mm clear of a
ring. A join's tool that meets no target goes into the target as a separate
lump and the tool body is consumed (doc eval Operation::Join; the engine test
join_meeting_nothing_keeps_the_first_body): one body, Ring, of two shells,
with the volumes' sum. The case's point, nothing fuses, is kept: shells 2 and
the summed volume.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f10dfd8d06 kernel-cases: crossing equal holes leave each wall in two faces
ladder/05/011 expected 8 faces (the stock's 6 and one per hole). With equal
radii the two walls cross along two ellipses that meet at the two points
where the walls are tangent (x = 25 and 35, y = 20, z = 10), so each wall is
left in two pieces that touch only at those points, with no edge between
them: separate faces, 10 in all. SMLib makes those 10 (volume exact); truck's
8 came with an invalid record. Derivation in the case's method.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 5df8a55657 engine: an extrude Join, Cut or Intersect leaves hidden bodies alone (#2464)
With no targets picked, an extrude's Join, Cut or Intersect changed every body
of the active component it met, shown or hidden: a hidden coincident copy was
joined in and disappeared. Where some bodies of the active component are
hidden, the shown ones become the feature's participants, kept with it, so
showing or hiding bodies later doesn't change the model. Explicit targets and
participants, and a face's or a face sketch's own body, still win.

Test: the issue's plate with a hidden copy and a rim joined on.

Main reached the same fix for Cut and Intersect in #3961 (its targets-based
shown_scope in extrude); this one, which also covers Join and keeps the shown
bodies as participants, replaces it. Its test stays.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 386b1d123f doc: a sweep round a closed path starts where the profile is (#3345)
A closed path was always followed from the start of its first picked curve,
wherever the profile stood on it. A profile drawn at the middle of a line was
then carried round the path standing off it by the distance between the two
(walls offset, the rounds turned the wrong way, on both kernels). Now the
closed chain begins where the profile's plane crosses it nearest the profile,
the curve there split in two (or at the joint there); open paths and paths
that already start on the profile's plane are unchanged.

Test: a 4 x 3 profile at the middle of the bottom line of a rounded rectangle
swept round it: Pappus volume and the tube within 2 mm of the path.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 ba99405e2f doc: a pattern or mirror of a pattern or mirror copies what that one made
Replaying a Mirror or Pattern feature asked it for its tools, which only primitives
and sketch features have: 'Mirror1 cannot be patterned or mirrored yet' (#3652). A
copy of a pattern or mirror of features now replays that feature's own features with
its moves followed by these (a mirror of Mirror1 reflects the hole Mirror1 made),
nested at most 8 deep, never through itself, and to at most MAX_INSTANCES copies in all.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 85da7d6c2b engine: count a face pick's work as it is done
Face capture estimated its work as every face times every triangle and refused a
body past 2M (#3914, a threaded block: 'face capture work limit exceeded'), though
only planar faces through the point scan the mesh. Each such scan is now counted
when made.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 f71cb3d991 engine: revolve about a construction axis given by name
solid.revolve and surface.revolve took any other axis string as a sketch line id,
so a construction axis by name failed with 'unknown sketch line' (#2516). A name
that is no line of the profile's sketch and names a construction axis is that
axis where it is now, as picking it in the view already passes it ({origin, dir}).
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00
jyvikoandClaude Opus 5.5 51d7fc4137 kernel: IGES trimmed surfaces close their loops and split into separate bodies
Three defects in restating trimmed surfaces (144/143) as STEP, kernel-agnostic:

- A boundary loop is one closed curve (IGES 5.3 composite curve: each piece ends
  where the next starts), but each piece's ends were sewn into vertices by
  distance alone, so pieces that miss by more than the sewing tolerance left the
  loop open and the face was dropped (#3845). Surfaces are now read first and sewn
  after: every meeting point of two pieces is one vertex (union of the two), the
  STEP reader then carries the distance as the vertex's tolerance.
- With no parameter-space curve to give the start, a composite whose first piece is
  written end to start kept that direction, so the second piece did not connect
  (#3913). The first piece now runs from its end away from the second.
- All sewn surfaces were written as one shell, so two separate closed boxes came in
  as one body of two shells that SMLib's check refuses (#3972). Each connected set
  of faces is now its own shell and body (Body1, Body2, ...); a shell writes only
  the vertices its edges use, in the sewer's order.
(not built: base in progress)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
2026-10-27 02:28:48 -04:00