* docs(mcp): Windows setup for Claude Desktop (paths, two servers, Store config file)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* docs(mcp): say the Store build can keep the config elsewhere, not that the other path fails
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Retain MID snaps across both picks and materialize reusable midpoint
constraints for point-to-line and point-to-point dimensions. Let midpoint
pairs choose horizontal or vertical spans with pointer placement before
entering a value.
Cover projected model edges, overlapping geometry, helper reuse,
undo/cancel/reopen, and existing angular and line-circle workflows.
While a section is on, Section Analysis opened with no plane picked now
says "No plane picked: OK turns the section off." and OK runs
inspect.section {"clear": true}. With no section on, OK with no plane
still asks for a plane.
Fixes#2410.
* claim: #4922
* UI: let themes own corner radii
* UI: use four-point panel and window radii in SolidCraft 95
* UI: align the 95 radius assertion with four-point panels
* claim: #4953
* UI: let themes own structural and control borders
* UI: single Blueprint outlines and dotted secondary rules
* UI: separate container outlines and add theme-owned 95 bevels
* claim: #5007
* UI: apply theme palettes to icons, workspace tabs and Gruvbox settings
* claim: #5045
* Viewport: invalidate cached geometry colours when the theme palette changes
* UI: preserve legacy theme logo colours with the borderless mark
* assembly(feat): ground first parts and drag free joint chains
Ground the first top-level part when it is created and let face dragging reposition free occurrences or any member of a floating joint chain in one undo step. Preserve exact repeated-placement frames, joint values, modifier selection and Escape cancellation. Keep the accumulated fixture, viewport layout and documentation integration fixes from the existing PR.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(fix): update movable fixtures for first-part grounding
Accept the documented grounded override in component creation, explicitly free movement fixtures, and keep linked clipboard pastes movable even in an empty document. Cover first and reused linked pastes, default insertion grounding, and single-step undo in the existing link tests.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): keep the motion-cost crank free
Unground the first component in the document-level joint-face measurement fixture so its motion samples can rotate after first-part grounding. Preserve the rotation and shared-measurement assertions that caught the Linux CI failure.
Signed-off-by: Karl Von Richter<karl@embeint.com>
* assembly(test): free the frame placement fixture
Create the frame-member placement fixture ungrounded before moving it above its root sketch. Keep its world-space member assertions while respecting first-part grounding in the frame tests added on main.
Signed-off-by: Karl Von Richter<karl@embeint.com>
---------
Signed-off-by: Karl Von Richter<karl@embeint.com>
* Extrude: picking a face, vertex or parallel plane off the profile turns the extent to To Object
With profiles picked, a face off their plane (or curved), a vertex off it, or a
construction plane parallel to it is taken as the To Object target instead of
another profile: the extent switches without the Extent Type choice, and the
distance shows how far the target is. Coplanar faces still join the profiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Extrude: automatic To Object is a Preferences setting, off by default
Preferences > Design > "Extrude to a picked target" (`extrude_auto_to_object`, default
false) turns the automatic To Object on. Off, picks in the Extrude dialog only add
profiles and the distance is not synced to a target, as before this change.
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4587
* Agent chat: end the agent's process group with the system call (#4587)
The group was signalled with a `kill` program: `kill -s TERM -- -<pgid>`.
That works with procps' `kill` and with BSD's, but busybox' `kill` takes no
`--`: it prints its usage, exits 1 and signals nothing. The agent's helpers
(the CLI an adapter wraps, the MCP servers it starts) then stay alive after
the agent is ended.
The group is signalled with the system call instead, so no `kill` program and
no shell are needed and the behaviour is the same everywhere. `nix` (MIT) is
already in the tree through zip, and only on Unix: the browser build does not
take it.
The two tests that cover this now pass where they failed before:
`agent_chat::process::tests::dropping_the_process_ends_its_group` and
`agent_chat::process::tests::stopping_the_agent_leaves_no_helpers_running`.
* claim: #4692
* Delete removes a selected construction axis (#4692)
Delete on a construction axis skipped it with "the origin axes can't be
deleted". It now deletes the construction axis feature, like construction
planes; the origin axes X, Y and Z are still refused.
Keep physical modifier events out of the ordinary-key slot, preview held keys immediately, and confirm after release and a one-second settling interval. Preserve legacy control-channel modifier behavior while allowing explicit physical Control/Command input. Add regression coverage, a UI scenario, localized guidance and documentation.
Fixes#1809.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4965
* Joins and cuts follow only the placements they depend on (#4965)
Tests that turning a joint between parts cuts no hole again, and that a
tool cutting another part cuts again when that part moves relative to it,
while an unrelated part moving keeps the result.
Booleans and Combine now hash only the placements of the bodies they take
as inputs, relative to the frame that evaluates them (#3397), so these
pin that behaviour for joins and cuts with named targets across parts.
The app opens its localhost control channel on port 27878 (or the next free
one) unless Preferences > Assistant turns it off; --control and
SOLIDCRAFT_CONTROL_PORT still win. A current.port discovery file lets
solidcraft-cli mcp find the running app with no arguments.
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #5079
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Crash journal keeps component.activate (#5079)
Activating a component changes only the session's active component and
occurrence path, not the design, so the journal dropped the command and a
crash report's replay built later parts under the previously active
component. The journal now also keeps a command that changes either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5124
* Flatpak: find the host's fonts for CJK text and the font list (#5124)
Inside the Flatpak sandbox the host's fonts are mounted at /run/host/fonts
and /run/host/user-fonts, which no font search looked at. Japanese and
Chinese text fell back to boxes, and the font list missed the host's
families.
- Search both folders for the CJK and Chinese fallbacks and for the
installed-font list.
- The CJK fallback reads SOLIDCRAFT_FONT_DIRS (a path list, as the font
list already does), with CRAFT_FONTS_DIR kept as a fallback.
A line drawn across a circle only snapped its end onto the curve, so a
diameter could miss the centre at any angle. Near the centre the line now
locks onto the radial line: on the rim it stays on the circle and the centre
is kept on the line, and on the centre point the end lands there.
* claim: #5137
* Dragging a part along its joint no longer highlights what's under the pointer (#5137)
The viewport's hover pick was skipped during a box selection and camera
moves, but not while a jointed part was dragged, so faces and edges under
the pointer lit up on every frame of the drag. The pick now waits until
the joint drag ends.
* claim: #3250
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Return to the originating toolbar tab after finishing a sketch (#3250)
A sketch started from SHEET METAL or PLASTIC always ended on the SOLID
tab. Remember the tab that was active when the sketch began
(UiState::sketch_return_tab, not saved) and go back to it when the
sketch ends. Falls back to SOLID when that is not one of the normal
toolbar tabs. A sketch started from SOLID behaves as before.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Test: no one-element loop in the return-tab test (clippy single_element_loop)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #3216
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter import and canvas image pickers offer their file types (#3216)
Both opened the picker with no file type of their own, so it listed only
designs, CAD files and meshes (and All files). macOS lets you pick only
the types a filter names: CSV parameters, and PNG or JPEG images for a
canvas, were greyed out. They now ask for csv/json and png/jpg/jpeg,
which the picker lists first (#1801).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3372
* Fix Escape cancellation in Change Parameters
Consume Escape before parameter editors can commit pending text on focus loss, while preserving autocomplete and shortcut capture priority. Add 11 UI regressions covering draft cancellation, preview cleanup, document and history preservation, and reopening saved values.
* claim: #3858 (3MF import: names from a Bambu Studio project)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 3MF import: name a Bambu Studio project's bodies after its objects (#3858)
Bambu Studio leaves the name off the root model's objects and keeps it in
Metadata/model_settings.config (<config><object id="N"><metadata key="name">),
so every object of a project came in as Mesh1, Mesh2, ... A build item whose
root object has no name of its own now takes the object's name from those
settings. A name in the model still comes first, and part names, other
settings and objects of other model parts are left alone.
The settings are read only when a body needs a name, within what the model
parts left of the 1 GB budget. Settings that can't be read (malformed, nested
too deeply, too large) never fail the import: the bodies keep the generic
names, with a warning saying why.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3838
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Cancel Sketch: leave a sketch without keeping its changes (#3838)
sketch.cancel (Cancel Sketch, ribbon Exit group and the sketch's
right-click menu) puts the design back as it was when the open sketch
was created or opened for editing: a new sketch is removed with its
dimension parameters, an edited one returns to how it was. It is one
undo step, so Undo goes back into the sketch.
The session remembers the design and the undo history at the point a
sketch is entered. Cancel uses that only while the history still runs
through it (the same steps before, every step since taken in this
sketch); otherwise it refuses and points to Undo, so a stale entry can
never throw away later work.
The icon is the approved close glyph in the sketch accent (alias
sketch_cancel); ja and zh carry the new label.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3857
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
* Joint dialog: a body of a further instance picks that occurrence, not the component's first (#3857)
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
* claim: #4100
* Deleting an inserted file removes its components, placements and joints (#4100)
A STEP or mesh file inserted into a design makes a component tree. Deleting
its feature left that tree behind: the components, their occurrences, the
rigid joints that hold them and the bodies' component assignments. A later
body that took an imported body's name was then placed in the stale component.
Document::remove_component_tree removes a component subtree and everything
that refers to it: the features made inside it, its occurrences, the joints
on them with their motion links, joint origins, contact set members, motion
study keys and exploded moves, body component and offset entries, standard
part and link records, and configuration columns. Deleting an inserted
file's feature and component.delete both use it; component.delete now also
removes joints left pointing at a deleted occurrence. The body transfer
refusal moves with it, unchanged.
* Only an inserted file's feature takes its component tree when deleted
Mark the feature a STEP, IGES or mesh insert makes (`inserted`), and remove
the component tree on delete only for those and for a linked design's
feature. Deleting a copied component's independent base deletes just that
feature, as before. Older designs get the mark as they open (pending format
change), except copied components' independent bases.
* claim: #4226
* Esc ends the navigation bar's Pan, Orbit and Zoom modes (#4226)
The nav bar toggled a mode on, but nothing cleared it on Esc, so a left drag
kept panning, orbiting or zooming. Esc now ends an active nav mode first;
the next Esc reaches the tool or dialog as before.
each_frame_hands_the_view_its_motion_through_the_drivers_mapping dropped
the output of a frame it ran (`let _ = ctx.run_ui(...)`). epaint panics
in debug builds when a TexturesDelta is dropped with deltas left ("Dropped
TexturesDelta with 1 unapplied deltas"), so the test failed under a plain
`cargo test` on every platform while the ci profile passed. It now clears
them, as the other UI tests do since #60.
Co-authored-by: Tyler Chiriboga <18270301+Tyler-Chiriboga@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4380
* "Don't Save" looks like a button in the Save changes prompt (#4380)
The prompt's third action used the kit's low-emphasis text style, so it
didn't read as clickable and people thought Cancel was the only way out.
Add an opt-in secondary_left style to the confirm footer (a framed
secondary button from the theme tokens) and use it for Don't Save.
* Save prompt test: clear each frame's texture delta once it is applied
egui 0.36 panics when a TexturesDelta with unapplied deltas is dropped;
the test kept only the last frame's output and dropped the earlier ones.
* claim: #4440
* Flat Pattern view: draw perforation holes (#4440)
The flat view drew the outline, cut-outs, pockets and bend lines but not
perforation fields, though the flat-pattern data and the DXF export list
their holes. The view now reads the hole centres from the sheet through
SheetBody::perforation_holes, caches them per model state and body, and
draws them as circles in the cut-out style. Holes outside the viewport or
smaller than one pixel are skipped, and the cache is capped at one million
holes.
* claim: #4464
* Sketch offset keeps its source lines free to turn (#4464)
An offset adds a Parallel between each source line and its offset line.
Since offsets became associative, the offset's points are held during a
solve, so each Parallel pinned its source line to the offset line's
current direction: a closed chain lost its turning freedom (8 degrees of
freedom became 6), and Horizontal or an angle edit on a source line was
refused as conflicting.
The solver and the constructive reading now leave out a Parallel that
ties an offset line to the source it follows while the association lives;
the association already keeps them parallel. After Break the stored
Parallel drives again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5254
* Toolbar: a constraint dragged out of the small box becomes a full button (#5254)
The Constrain panel's small box of constraint icons was a fixed list, so
dragging one onto the full-size buttons saved a new order but it was still
drawn in the box. The toolbar settings now remember, per tab, which box
commands were moved out; those are drawn as full buttons, the box closes
up, and dropping one back on a box icon returns it. Reset Toolbar restores
the default box, and settings saved before this load unchanged.
* Renaming a body that later features change evaluates nothing (#2467)
Model::rename_body now keeps the results when later features change the
body (a pattern, a chamfer, a join). It still evaluates when a body of
that name comes and goes or isn't the same body throughout, when a later
body's name is worked out from it (X (2)), or when a message quotes it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Rename box: rename off the window thread, and locked bodies follow a rename (#2467)
The rename box commits body.rename through run_heavy, so a rename that
still evaluates later features (one names the body in its targets)
computes beside the window instead of freezing it. Locked bodies now
follow a body.rename from anywhere (the rename box, the control channel,
scripts), not only the rename box.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3187
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Reorder design tabs by dragging them (#3187)
A tab dragged along the strip follows the pointer while the others make
room, and lands where it is released; Escape, or releasing down the
window, leaves the order as it was. With the custom title bar a drag that
starts mostly up or down (or on the only tab) still moves the window.
The control channel's ui.documents gains a move action (from, to).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #1783
* FreeCAD/Rhino import: decode caps with room for detailed parts (#1783)
cadmpeg decoded FreeCAD and Rhino files under its service profile, whose
million collection items and 2.56e8 work units a detailed part (a sprocket,
a threaded rod, a part with a few hundred faces) runs past: the import was
refused with "resource limit on CollectionItems: BudgetExceeded". Allow
8 million items and 2e9 work units, half of cadmpeg's desktop profile; the
input-size cap stays SolidCraft's STEP limit and every other cap stays at
the service profile's.
decoding_is_capped checks the two raised caps (and that they stay below the
desktop profile's) and that every other cap is still the service one.
Fixes#1783
* claim: #3278
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* 2-point circle takes a typed diameter (#3278)
After its first point the 2-point circle tool showed no value box, so the
circle could only be sized with the cursor. It now shows a Diameter box,
like the centre circle: the typed value puts the second point that far
along the cursor's direction, and Enter draws the circle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Macos: keep touchpad/key modifiers true to fusion
* fix: remove obsolete orbit snap reset from trackpad navigation
Upstream removed ViewportState::orbit_snap. The new trackpad orbit path retained one reference, causing E0609 in the PR merge build.
Validation: all seven trackpad tests pass; cargo check -p solidcraft-ui-egui --all-targets passes on the exact failing CI merge 66a2791b with this fix applied; rustfmt and diff checks pass.
Co-Authored-By: GitHub Copilot <noreply@github.com>
* fix: retain Fusion trackpad help in refactored preferences
Preserve upstream's new preferences pages and apply the translated Fusion trackpad tooltip in prefs/navigation.rs.
Validation: cargo build -p solidcraft passed. Tests and full CI were not run, as requested.
Co-Authored-By: GitHub Copilot <noreply@github.com>
* style: format Fusion trackpad preferences tooltip
Apply rustfmt's required wrapping for the relocated tooltip. No behavior changes.
Validation: cargo fmt --all -- --check and git diff --check passed.
Co-Authored-By: GitHub Copilot <noreply@github.com>
---------
Co-authored-by: GitHub Copilot <noreply@github.com>
* claim: #3471
* Delete in a rolled-back history warns about the features after the marker (#3471)
With the timeline rolled back, the checks a delete runs first (the
confirmation's "these features will fail", timeline.dependents and
selection.delete's would_fail) compared models evaluated only up to the
marker. Features after it, broken by the delete, were not listed, so their
error marks turned up only once the timeline moved to the end.
newly_broken_in_history evaluates both sides over the whole history when
either has a marker (on copies; the model and document are unchanged) and is
used by the delete's report and by timeline.dependents.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #3042
* Warn when cut pattern copies remove no material
A rectangular or circular pattern whose copies miss the body succeeded silently and those copies did nothing. The pattern now reports how many of its cut copies removed no material, and keeps the copies that land.
* claim: #4003
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the profile library (#4003)
The first slice of frames and weldments: the cross-sections structural members
will be made of, each SolidCraft's own parametric definition built in code
(no vendor or standard size tables are shipped).
- solidcraft_doc::frame: bar, round bar, rectangular and round tube, angle,
channel, I-beam and a generic T-slot extrusion as exact line/arc regions,
with defaults worked out from the profile's size, refusals that name the
dimension that does not fit, anchors and placement, and exact section
properties (area, centroid, Ixx/Iyy/Ixy by Green's theorem).
- frame.profile.list, frame.profile.properties (with mass per metre for a
density) and frame.profile.insert (draws a profile into a sketch, locked by
default, at a point, anchor and angle).
- Tests against hand-computed values (rectangles, circles, composite
rectangles by the parallel-axis theorem, fillet spandrels), hostile input,
extrusion volume, undo; catalog entries in every locale; docs/frames.md;
ROADMAP M15.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: drop the built-in T-slot profile (#4003)
Aluminium extrusions and other vendor sections come from the user's own
sketch (drawn or inserted from the vendor's DXF), so the library keeps the
plain steel shapes only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: members along frame sketch lines (#4003)
frame.member lays one body per straight line of a frame sketch (2D lines or
3D sketch lines), its cross-section square to the line from end to end:
- profile: a built-in profile, or profile_sketch, a sketch whose material
(nested loops alternating, so two circles make a tube) is the section in
its own x and y around its origin; profiles picks override it.
- anchor (origin, centre, centroid or a bounding-box corner or edge middle),
angle (an angle expression, so a parameter), mirror.
- Orientation: the profile's y as near world up as the line allows, x
square to both; a vertical member's x is world X (frame::member_axes).
- Members follow sketch and parameter edits, undo as one step, save and
reopen (format: pending/frame-members.rs), and are named after the profile
(Rect Tube 40x40x3, (2)…), numbering on past names already taken.
Tests against hand-computed volumes and bounding boxes (rectangle, 3D
tower lines, parameter edit, sketch tube profile and picks, anchor/angle/
mirror), refusals, undo/redo and reopen; walk fixtures and goldens; docs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: fixes from the adversarial review (#4003)
- Default member lines are what was drawn: projected and other linked curves
and 3D wires (a face sketch's edges) and lines of no length are left out.
- A profile sketch's material starts from its drawn profiles, as
solid.extrude's "all" does, so a section sketched on a face works; the
even-odd test uses outlines and boxes worked out once, capped at 256.
- Member names are pinned to their lines (`names`, by line id; `body_name`
is the base): deleting or adding a line, or deleting another feature, no
longer renames other members, and frame.member stores every name it gives.
body.rename renames a member on its line (also for later member features);
a copy whose body_names were set still names its members by position.
- Built-in profile dimensions are expressions (ProfileSpec): they follow
parameters, bare numbers take the design's units, and they are feature
inputs. frame.profile.properties/insert read them the same way.
- Default root/toe radii shrink to the room a thick section leaves; radii
given are checked by name; a radius must be 0 or at least 0.01 mm; error
messages report the wall or flange value given, not twice it.
- A line within 1e-6 rad of vertical orients as vertical, so rounding never
turns a post a quarter turn.
- A 2D frame sketch in a differently placed component is mapped into the
member's frame, and member features recompute when placements change.
- Caps before lookups for a design's `lines`; a line listed twice is
refused; a 3D wire that runs back on itself is not a line.
Regression tests for each, from the review's scenarios.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Frames: the Frame Member dialog on the ribbon (#4003)
- Frame Member (MODEL > Create) opens a dialog: the frame sketch's lines
picked in the view (or All Lines), a built-in profile and its dimensions or
a section picked in another sketch, anchor, angle, mirror and name, with a
live preview. Edit Feature reopens it filled in.
- Lines picked in the view keep their sketch (a SKETCH_LINES input picks
ExternalSketchCurve): line ids are each sketch's own, so two 3D sketches
both have a `w2`, and the members went on the newer sketch's lines.
- timeline.redefine takes frame.member. Members keep their names through an
edit unless it gives them a new body_name; frame.member takes `names`.
- A member whose section is a whole profile sketch keeps it when edited
(the dialog shows the sketch instead of picking every region, which would
fill a tube's hole).
- An original frame_member icon, open for review, on the ribbon, timeline
and browser.
- The angle profile is listed as L-Angle, and web and flange as Web/Flange
thickness, so they translate apart from the existing Angle, Web and Flange;
the dialog's labels are in en, ja and zh. en-GB no longer repeats the frame
command labels it spells the same.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Nine tests dropped an egui frame's output with its texture delta still
unapplied (the expression completion editor's frames, the slot preview's
three, the browser's feature rows). epaint asserts against that in debug
builds, so they failed under the dev profile and passed only where debug
assertions are off. They clear the delta as the other tests do; one more
hover test that dropped its output the same way does too.