The inner corner of a 20 x 20 x 10 notch in the 60 x 40 x 20 box, three
concave r5 rounds with corner: g2: one valid body of 13 faces within the box,
the patch's twelve seams jumping at most 1e-3 per mm clear of the hole's six
corners (2.7e-4 measured; the ball corner jumps 0.2). The continuity check
looks within 11 mm of the corner: the vertical round, 2.5 mm long past its
setback, meets its faces 11.2 mm out with every round's G1 jump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
expected.json `continuity`: over the tangent seams wholly within `within_mm`
of `near`, the curvature jump across them (exact surfaces, 65 stations a
seam) at most `curvature_jump_per_mm` clear (`clear_mm` along the seam) of the
vertices where two of them turn, where a neighbour's own G1 seam ends.
07/015, the box corner's three r5 rounds with corner: g2: one valid body of 10
faces within the box, its patch's twelve seams jumping at most 1e-3 per mm
clear of the hole's six corners by 1.2 mm (2.7e-4 measured; the ball corner
of 009 jumps 0.2). Its golden entry is the passing run's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The r7 on the vertical edge runs on (tangent chain) up the side's arc on the
r5 round, a circle of radius 5: its contact line on that face would be the arc
offset 7 towards its centre, so no such round exists and the right answer is
a clean refusal. 018 picks a radius that fits (r2: 11 faces, inside the box).
cases.py now writes 013 (the corner setback, graded by its convexity bounds)
instead of marking it missing; its tolerance is the interval's exact half
width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
010, 011 and 012 passed on one valid body alone. 010 (r7 then an r3 chain
round its arc) and 011 (two r5 rounds in a mitre) now check closed-form
volumes, counts and bbox; 012's variable round takes only its edge and
runs on into the vertical round's column, so its volume is graded as the
interval between that end carried on as a constant r5 tube and as its
growing radius. All hold on SMLib (worst 4e-8 relative; 012 at the
growing-radius end).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Three r5 rounds at (60,40,20) set back 8: the volume between the convex
hull of the body on the corner cube's faces and the rounds' prisms (both
bounds closed form or a sampled hull below the true one), the box's bbox,
and SMLib's setback-patch topology (15 faces, 36 edges, 23 vertices).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The r3 on the top edge at x = 60 takes tangent_chain: false, so it
rounds that edge alone and not the r5 round's tangent chain with it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
(cherry picked from commit cf46e2a713c45ae0427e831cae1dc1d3b858febc)
Tiers: primitives; booleans in the degeneracy classes (coincident and coplanar faces, edge-on-edge,
vertex-on-face, tangent along a line and a circle, near-tangent gaps and overlaps of 1e-3 and
1e-6 mm, seam and pole crossings) and cuts that end in a single line (a knife-edge wedge, a V
groove and a cylinder that pinch the part in two, a hole tangent to a face, a notch flush with an
end); line-and-arc extrudes and revolves (partial, touching the axis); spline profiles, sweeps
and lofts; holes and tapped holes (blind, drilled, counterbore, countersink, M5-M8 taps, into a
curved face, near and tangent to an edge, crossing); modelled threads (external, fine, partial,
to a shoulder, internal, into a chamfer, at a filleted shoulder); fillets (constant, tangent
chains, convex and concave, variable down to 1e-3 and to 0 at a vertex, corners with equal and
unequal radii, g2 corners); chamfers (two distances, angle, three- and two-edge corners, curved);
shells and offsets; patterns and mirrors (overlapping instances that cut a core free); and
cumulative parts.
A running part grows one tier at a time through `base` (back wall, revolved boss and slot,
spline window, tapped holes, rounds, chamfers, shell, vents), and the last case adds its thread:
it carries every tier. Answers are analytic wherever the geometry has them (Pappus, Steinmetz,
ISO 68-1 basic thread profiles, exact Gauss quadrature of Bezier profiles, inclusion-exclusion
for chamfered corners), otherwise invariants; each `method` gives the derivation, and
tools/kernel-ladder/cases.py (standard-library Python, like tools/oracle-analytic) writes them.
Capabilities SolidCraft lacks are `missing` cases: multi-start threads, thread runout lengths,
fillet corner setbacks.
The golden is the first recording on truck, each tier sorted by its time. SMLib booleans are
not on this branch yet, so the smlib column records "not supported yet" for every case.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT