tangency-labs/smlib e51c3f2: a drop that comes back in pieces is joined
where they meet, never stretched onto its edge (solidcore#1383), and
smlib_brep_edge_face_distance.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pins tangency-labs/smlib 56f6e81 (release prebuilt-56f6e811bc84…): smlib_blend_setback_eased
and smlib_blend_setback_open_eased, an ease length before each set-back corner over which a
round's section blends from its circle to the curvature-continuous section (solidcore#1376).
New calls only; existing ones are unchanged (ease 0 is today's body).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pins tangency-labs/smlib 1072d1b (release prebuilt-1072d1b857de…): an N-sided corner
patch now meets each round on the round's own exact section edge instead of its polynomial
approximation, which the stitch kept on a near tie at some corners (solidcore#1377).
SMLIB_PREBUILT rewritten by scripts/fetch-smlib.sh --pin.
The kernel's tess, display_mesh, step, corner and fillet tests fail the same 63 as with the
previous pin, none new.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
tangency-labs/smlib's prebuilt workflow builds the C API once per commit for every Rust target
SolidCraft builds (Linux x86_64 and aarch64, macOS arm64 and x86_64, Windows x64, x86 and ARM64,
wasm32 with wasi-sdk's C++ runtime) and releases it as prebuilt-<commit>. SMLIB_PREBUILT pins each
archive's SHA-256. scripts/fetch-smlib.sh now downloads the host's archive (or the named
targets'), checks its hash and the commit it was built from, and falls back to the sources for a
target with no archive; --source fetches the sources, --pin writes SMLIB_PREBUILT from the
release. build.rs links a fetched archive whose hash matches the pin, else compiles as before,
now with -ffp-contract=off like the archives: every platform does the same arithmetic. No
network access in build.rs.
SMLIB_REV moves to 8b57e7e: the workflow, and fixes for MSVC (no directive inside a macro
argument, SM_PI for M_PI), the no-fused-multiply-add build and a test that needed a POSIX shell.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HoZgkCdAVrscuw2kjQTWDs
SMLib holds every ellipse as an exact rational NURBS; the fork now sends ellipse edges with that
form and takes them back with it. The export reads an ellipse with its form as it reads a circle
with one (its frame turned so its angle grows along the form, its trims carried over as they are);
the import writes an ellipse on its form as its conic entry plus the NURBS.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BnQawySUFx57iaJZq7z1Fm
No floor of ours on tolerances (1e-6 of the body's size, 30 times SMLib's 1e-5 default): the
record's tolerances go back into SMLib, which approximates to them, so the floor coarsened every
later operation. No recognition of NURBS edges as lines or circles: an edge is a circle where
SMLib holds an SmCircle (with its NURBS form), and a NURBS edge keeps SMLib's trims on its own
parameter. crashes/2992 and sweeps/1853 pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edge::curve_interval (and brep::curve_interval for assemble's edges) gives the interval on the
edge's curve itself: a form circle's angles of its ends, its frame turned by the SMLib conversion
so the angle grows along the NURBS. lip and the ruled surfaces read arcs by it; the hull, the
blend tangents, the patch pcurves, point paths, IGES output and the prism runs evaluate on
Edge::parameters. assemble carries an edge's form through.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The SMLib conversion reads and writes EDGE_NURBS_FORM: a circle edge's record keeps the circle
as what it is and the NURBS SMLib holds it as as its parameter, so the trims on it carry over
exactly (TrimMap identity).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Pinned at the fork's draft-corners head: a drafted rectangle (or any
line-line corner) has its walls meet at a corner edge under the tangent
rule as well, 6 faces rather than 14. A curvature refusal for a curve
that is neither a line nor an arc names that curve's start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
extrude_tapered(_between) take a DraftCorner: PreserveCurvature (each wall
continues as itself, a line's plane or an arc's cone, until it meets its
neighbour; SMLib's SM_OC_CURVE_EXTENSION), Tangent (the offsets continued
along their end tangents) or Round (an arc about the corner). A corner
the rule cannot close is refused with its point and why
(solidcraft_smlib::Error::Corner). draft_corners reports, per sharp
corner of a profile, what each rule gives: how far each offset curve runs
on or is trimmed, whether the corner cuts inside the exact offset, or why
the rule refuses it. SMLib pinned at the fork's draft-corners head.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLib's mass properties no longer refuse bodies that are not one manifold
solid: several lumps and lumps touching along edges or points are the sum
over their material regions, and a sheet is its faces' area and centre with
volume 0. Docs of Brep::mass_properties and kernel::measure say so.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Brep::face_section (smlib_face_section: one face cut by a plane) hands back
the NURBS SMLib made with their intervals, through one reader of smlib_curves
(take_curves) shared with project_curves. The face-pick errors map to
NoMatch/Ambiguous in one place (picked). SMLIB_REV at fork eedfa51.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The FFI for smlib_project_curves and the smlib_curves result (fork 5f9af50),
and the safe call: a curve list projected along a direction onto the picked
face, back as Curve::Nurbs with each curve's interval. SMLIB_REV at 5f9af50
(fork integration head 1934b57 + the untrim status fix + the projection shim).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
ssi::intersect took a sample count and gave each intersection curve as
samples: its 3D points, its UV points on each surface and the surfaces at
them. The fork's 947eedc hands out the curves SMLib's intersectors return,
exactly (smlib_ssi_curve_nurbs: degree, knots, control points, weights), and
drops the samples; SMLIB_ABI_VERSION 4.
SsiCurve now holds the 3D curve as a schema 4 Curve::Spline or
Curve::RationalSpline (rational where a weight is not 1) and each UV curve
the method returned as a Curve2, with SMLib's type, deviation estimate and
the 3D curve's natural interval; ssi::intersect loses its sample count. A
curve SMLib does not hold as a B-spline is Error::Unsupported (it is never
approximated); a B-spline whose knot count is not points + degree + 1 is an
argument error.
The SSI corpus scorer (tests/ssi_corpus.rs) samples the exact curves itself
where the corpus runner samples them: 4001 parameters spread evenly over the
3D curve's natural interval and over each UV curve's interval, the surfaces
evaluated at the UV samples, samples that cannot be evaluated dropped. The
unit test plane_through_sphere_is_a_circle evaluates the exact curve.
Nothing else used the samples. SMLIB_REV: the fork at 947eedc.
clippy -p solidcraft-smlib --all-targets, with and without native: clean.
The corpus gate (smlib_global_intersect_at_1e_6) is not run here.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The safe wrappers of the fork's smlib_stitch (a body's faces sewn at a tolerance,
oriented, with whether it closed) and smlib_offset_sheet (a sheet's faces onto
their offsets), for the kernel's Stitch and Offset Surface.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
face_params and outline are gone (no callers on the record). The fork head adds the 2D planar
boolean (smlib_planar_faces, smlib_boolean2d), the grazing-curve crossing rule (solidcore#480) and
untrim's parameter-box status.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Wrappers of the fork's smlib_planar_faces (a sheet of planar faces from closed curve loops in
one plane, nested by SMLib) and smlib_boolean2d (two such sheets combined as regions of the
plane by SM_API's 2D boolean, the inputs' own curves split where they cross; an empty result
is None). SMLIB_REV moves to the fork commit that adds them (78617dd).
clippy -p solidcraft-smlib --features native --all-targets -D warnings: clean.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The fork head carries untrim and extend shims with their history tags, the local solvers that
take no value from a failed evaluation (solidcore#481), the B-spline curve radius check
(#475), the torus minor-interval check (#482), the blend rail along its face's rim (#485) and the
intersection path's statuses.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
assemble (records rebuilt after removing and adding faces) joins; the boolean guards that re-ran
a failed boolean with a changed tool (bore_guard, candidate_reach, sphere_lens, tangent_cylinders,
touching_walls) are gone; the lens-cut result stays as a boolean test. SMLIB_REV at the fork's
integration head with smlib_merge_faces.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The wrapper of the fork's smlib_merge_faces (SmBrep::RemoveTopologicalEdgesAndVertices): faces
on one surface meeting along an edge become one, edges on one curve meeting at a vertex nothing
else uses become one, and the edges under the given points stay. SMLIB_REV moves to the fork
commit that adds it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The fork's shims now hold an operation SMLib reports done to having done
something (SMLIB_ERR_NO_EFFECT, -1107: a blend that made no face, a face
move or draft that moved no face). It maps to Error::NoEffect, and the
kernel says "SMLib made no change: ..." for blends and for offset, shell
and draft. Case 1080 (chamfer over openings) returned an unchanged body
as success.
The fork pin moves to 6bb2938: the chamfer side fix of the piecewise
merge, the no-effect contract, and SmStatus marked must-use with the
dropped statuses of the shims and of the fillet, boolean, offset and sweep code passed on.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
measure_backend asked SMLib for mass properties at 1e-8, the finest its
integrator allows and below the range SmApiBrepComputeMassProperties
documents ("Relative accuracy, clamped to [1e-4, 1e-1]", SmApiQueries.h,
whose cost is "governed by dRelativeAccuracy"). The tight request was there
because the documented range did not hold on faces bounded by circles
(KNOWN_ISSUES.md); the fork's dcbb07d integrates each trim-curve knot span
on its own, and such faces now meet it (a cylinder's volume 1.8e-6 off at
1e-4). At 1e-8 SMLib's measure was most of the regression rig's time on a
modelled thread (threads/602).
The measure now asks 1e-4: ten times inside the 1e-3 it is held to (AGREE
against the mesh measure, and the rig's volume and area tolerance). NURBS
spheres and tori can still miss 1e-4 by a small factor (tangency-labs/
solidcore#384; a torus's volume 2.5e-4 at 1e-4), inside that 1e-3.
Brep::mass_properties keeps MEASURE_ACCURACY (1e-8) as its tests' default.
SMLIB_REV: the fork at dcbb07d.
Not built: base in progress (kernel-smlib/no-truck 52f25ca3 does not build).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Brep::sweep_placed (smlib_sweep_placed, fork f6f428b) returns the rigid motions
carrying the profile onto the sweep's first, middle and last sections. Each run
of a path with corners now takes its end pose from the last motion (less the
straight lead-out along the end tangent) and its inside seeds from the middle
one, for every path segment kind: the 3D sketch spline next to a corner is no
longer refused. Deleted: the predicted carry along a run (carried) and
point_path::cubic_split, which only it used. SMLIB_REV at f6f428b.
Fork: build + ctest, only smlib_flat_roundtrip's known incline failure.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Over the fork's new smlib_brep_bounds (SmBrep::CalculateTightBoundingBox): the box of a body
from its exact curves and surfaces, for measuring without a mesh on the SMLib kernel.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The fork's new smlib_loft_to_point (a pyramid from a planar section of lines
to an apex) as Brep::loft_to_point. The pin brings the sweeps' other
changes: a loft's section may hold holes (loops lofted loop to loop), a
sweep along a straight path is an extrusion and one turning with arcs about
one axis a revolution (exact walls), and a sweep round a closed path closes
its walls on each other, without caps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Two SMLib fixes (tangency-labs/smlib r-shell-fillet):
- b0e84f4: faces an extended offset already mated are not intersected
again in the offset's merge (rig shell/3103, a two-half cone frustum
shelled open at the top, now one valid solid at the closed-form
volume).
- ffaf4e8: an intersection edge's end goes to its own vertex when its
ProtoVertex resolved into several (rig fillets/1488, the slab joined
with a nudged pleated loft, valid again; booleans/2801 passes too).
Every rig case that passed on SMLib at 2d7c7ed still passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The wrapper of the fork's new shim (61ee7f5): a planar profile placed
by an affine map at each station, the walls skinned through the
sections, the ends capped, open, or joined round a closed path
(Ends). Tests: a twisted square (V = A L), a scaled disc (frustum), a
square carried round a circle with its ends joined (Pappus), and
singular or too few stations refused.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLIB_REV moves from 276b509 to capi-solidcraft 2d7c7ed: a fillet crash at an
unsupported corner (#453), rounds ending on a tangent seam (#418), radius laws
with a corner (#430) or that cannot be evaluated (#458), a round over a hole
(#422), a sphere's own patches kept apart (#423), offset surfaces extended the
same way whatever was evaluated first (#419), swept walls sharing their planes
(#434), the internal thread's last vertex gap (#410), shells across rounds
thinner than the wall (#397), nested shells imported in any order (#388) and
the tessellator held to its chord tolerance (#390).
Three tests follow: a radius law with a corner is now built, so the SMLib
tests check its volume (8000 - (1 - pi/4) 20 28/3) and that a law pinching to
zero inside the edge is refused; the split coil's halves now measure within
1e-5 of the closed form, so they are held to it rather than to the whole
coil's mesh, which is only within 3e-3.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
SMLIB_REV moves from e1ac3c3 to capi-solidcraft 276b509: thread groove
booleans (#435, #410), a holed profile swept along a bent path (#411), a
revolution a turn past its range (#428), shell and offset faces (#402, #380,
#403), the check linear in the body (#431), a far box that leaked (#377),
fillets and chamfers where a neighbouring round collapses (#416, #417, #420,
#379), tangent faces round a non-manifold edge (#383) and split faces of an
exact NURBS surface (#387).
The last one is why the SMLib block-and-cylinder decode test no longer finds a
spline edge on part of its curve: SMLib keeps a split face's parameterization
now. The test keeps its volume check; the decode of such edges stays covered
by spline_edges_on_part_of_their_curve_load_as_that_piece.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Flat faces tilted by an angle about the line where each meets a neutral plane, leaning in along
the pull, and the faces around them extended or trimmed to meet them
(tangency-labs/smlib@e1ac3c3, SMLib's local operation). A face that isn't flat or isn't parallel
to the pull is Error::Unsupported. The test drafts a cube side by +-5 degrees, removing or adding
the analytic wedge to 1e-6.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A gap the boolean fixed on one side only left the freed edge in its common-edge map, and the next
pass read it: a square-wire coil cut into the wall of a bore crashed the process on SMLib
(sweeps/2552). It now fails with an error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SMLib's tolerance update now fixes the vertex gaps its check reports (gaps over half a vertex's
tolerance), and every boolean, blend, shell, offset and sweep result grows its vertex and edge
tolerances over gaps below SMLib's own rounding bound before it is handed out. A thread's groove
cut from a shaft no longer fails SMLib's check on vertex gaps of about 1e-5 mm, and an offset
sphere face no longer fails it on an edge gap of 5.015e-6 against 5e-6 (shell/2939).
Also carries the fork's blend commits since ca2559f (second offset per edge, two-setback
chamfers, variable radius laws with a corner refused) and the IGES knot check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
SolidCraft's own record of a body SMLib made (the rig's record check, the saved body, the next
SMLib import) re-fitted every pcurve at the kernel's working tolerance, 1e-5 mm. SMLib's fillet
and chamfer surfaces lie some 2e-5 to 2e-4 mm off their faces, so 15 fillet and chamfer cases
failed that check although SMLib's own passed. And SMLib reported one tolerance for a whole body,
the largest any part of it needed, so one loose edge (a pocket cut left one at 0.23 mm) made the
whole body loose on its way back into SMLib.
Now the tolerances go per edge and per vertex, both ways:
- solidcraft-smlib reads and writes the fork's new SMLIB_FLAT_EDGE_TOLERANCE and
VERTEX_TOLERANCE arrays. Export gives each edge and vertex record its own (never below the
floor, which becomes the body's). Where those understate what an approximated edge needs on
its face (SMLib holds a blend's end curve 2.3e-5 mm off its plane at 2e-5), the export falls
back to SMLib's largest everywhere, as before. Import writes each record edge's and vertex's
tolerance.
- `geom::brep::pcurve::EdgeUse` carries its edge record's tolerance, and a pcurve is fitted to
it where it is larger than the face's.
- The kernel's decoded body keeps its record's edge and vertex tolerances
(`Body::tolerances`, in its edge and vertex order) after an SMLib operation and a saved body's
decode, and keeps them through a rigid placement. Its record writes them again; anything that
builds a new solid drops them.
SMLIB_REV moves to the fork commit that adds the arrays (smlib-blends-abi2 4a67471, ABI 2).
Rig and ladder fillet and chamfer cases on SMLib: 43 pass before, 60 now, none lost. Tests: a
pcurve fitted to its use's own tolerance, and the ladder's 08/006 cylinder rim chamfer whose
record, saved body and placed copy all stay valid and SMLib's check takes back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
The Rust side of the fork's smlib_blend and smlib_fillet_variable, which the kernel's fillets and
chamfers need on SMLib: `Brep::blend` takes a size per picked edge and a `Blend` (circular round,
curvature-continuous round between the round's contacts, constant-chord round, equal-distance
chamfer); `Brep::fillet_variable` rounds one edge with a clamped B-spline radius law from the end
nearest a start point. Selection errors map as for the other picking operations.
SMLIB_REV moves to the fork commit that adds them (smlib-blends, on capi-solidcraft ffcf56d).
Tests: per-edge rounds and chamfers and the chord round against analytic volumes, the linear law
from either end, and refused laws and picks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT