Commit Graph
80 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 739153d3dc Fillet dialog: one option model, plain labels, refusals in plain words
The dialog follows the options solid.fillet takes together: If too large
(fit) and Corners show only for Constant radius, a curvature corner and a
fitted radius rule each other out and the other resets visibly, and an
option that does not apply is never sent (it used to send `corner: g2`
with Reduce or Taper and get refused). Variable Radius shows only for the
types that take it; the Advanced section held only the fit and is gone.
Each option has a one-line hover text. Kernel refusals read in plain
words, with the raw text in the hover, Copy Details and the issue report.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 13:52:32 -04:00
jyvikoandClaude Opus 5.5 1260353f48 Fillet Corners: the shared continuity control says what each corner builds
The Corners row keeps the control's words (Tangent, Curvature) and its hover text says what
each makes: a rolling-ball corner (G1), or a smooth patch set back along each edge by the
Setback, 1.5 × the radius when empty (G2). continuity_row_explained is the shared control with
a caller's hover text; the new lines are in en, ar, de, he, ja, ko and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 21:15:20 -04:00
jyvikoandClaude Opus 5.5 2fed39c85c Continuity Analysis measures G3 and G4; the dialogs offer what each construction builds
Each seam now also reports the jump of the curvature's arc-length derivative across it (G3)
and of its second derivative (G4), both from the faces' exact partials, and its order: the
highest one every station meets within the tolerances (two new tolerances, defaults in the
kernel). The verdict keeps its meaning (smooth is G2 or better). inspect.continuity replies
with the new metrics, each seam's order and a count per order; the viewport widens G3 and G4
seams, the legend and the marker labels name every order in words. The Patch, Blend and
Boundary rows offer the orders the kernel's Construction table says they build. G4's words
in en, ar, de, he, ja, ko and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 21:15:20 -04:00
jyvikoandClaude Opus 5.5 87e7fe472b Tapped holes: a preference keeps metric's major-less-pitch drill
New metric tapped holes drill the tap maker's drill (M8 6.8 mm). The Design preference "Metric
tapped holes drill the major diameter less the pitch" (`metric_tap_drill_major_less_pitch`, off
by default) gives them the drill every metric size took before (M8 6.75 mm): the Hole dialog
shows and sends it, and `solid.hole` given a thread and no `diameter` drills it, through the
session as `auto_project` is (kept when a design is opened or started, and across tabs). Unified,
pipe and taper sizes keep their tabulated drills; a given diameter is unchanged. Saved designs
keep the drill they stored either way.

Labels in en, ar, he, ja, zh, de and ko.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 05f1c6b9ac Tapped holes: the tap maker's drill for every form, and a drill of the user's within 5%
Every tapped hole now drills the tap maker's tabulated drill. ISO metric takes Yamawa YEU23's
drill size column for cutting taps (printed p.704, M coarse; pp.704 to 706, MF fine): M8 drills
6.8 mm and M12 10.3 mm, where the major less the pitch gave 6.75 and 10.25. A custom metric size
the table lacks keeps the major less the pitch. UNC/UNF (Guhring), G, Rp, Rc and NPT (Yamawa)
were tabulated already. The Thread command's suggested hole for a metric size follows.

The Hole dialog's Tap drill diameter is now a field, the tap maker's drill by default, and the
command's `diameter` with a thread is checked the same way: a drill is accepted from the
internal thread's standard minor diameter (or the tap maker's drill where that lies below it:
Rp, Rc, NPT) to 5% over the tap maker's drill. Outside that the command names the range and
why. The field's tooltip gives the drill, the minor diameter and the range. Presets keep a
chosen drill.

A saved design keeps the diameter it stored, so it builds as before, and editing such a hole
keeps its drill: no preference and no format change. Scripts that give a thread without a
diameter drill the new default; ladder 05/007, 11/003 and rig case threads/2115 follow
analytically, and their golden entries are re-measured from runs (tier 05 re-sorted by time).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 e7994d48cc Tapped holes: Rc and NPT take the tap maker's tabulated drill
The Rc and NPT drills were rounded to a drill series from a third-party reproduction of DIN 345
and a fractional/letter inch series cited from memory. They now come from the same tap maker's
catalogue the G and Rp drills do: Yamawa YEU23, printed p.709 (Rc, the maximum straight bored
hole with non-full threads, Rc 1/16 to 4) and p.710 (NPT, the maximum straight bored hole, 1/16
to 3). A size its tables lack (Rc 5 and 6, NPT 3 1/2 to 12) is refused as a tapped hole, naming
the range. The dialog's tooltip keeps the standard's minor diameter where the thread ends.
Rc 1/2 drills 17.6 mm (minor 17.807), 1/2 NPT 17.60 mm (minor 17.473).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 b6c3b32a98 Tapped holes: an Rc or NPT hole takes the stocked drill under its standard minor
An Rc or NPT hole was drilled to the exact minor diameter where the thread ends, a size no shop
stocks. It now takes the largest stocked drill not larger than that: metric drills of the DIN 345
series for Rc (to 100 mm), letter and fractional inch drills by 64ths (to 1 1/2 in, ASME B94.11M)
for NPT; past the series it is bored to the exact value. The Hole dialog's drill shows the inch
size for NPT, and its tooltip the exact standard value. Rc 1/2: 17.807 mm, drilled 17.75 mm;
1/2 NPT: 17.473 mm, drilled 11/16 in (17.4625 mm).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 80e47130b9 Thread: the pipe forms in the dialog, ISO 7-1's Rp, a chamfered tip on a taper thread
The thread dialog offers the pipe threads: G (ISO 228-1), Rp (ISO 7-1), R and Rc (ISO 7-1) and
NPT (ASME B1.20.1). Their sizes are listed by designation without a pitch, one start and a hand
of right or left; a size picked for a hole the dialog sized Rc stays Rc.

Rp, ISO 7-1's parallel internal thread an R screws into, is a form of its own (`rp`): the
parallel profile (H = 0.960491 P) at ISO 7-1's gauge diameters, refused on a shaft. Its cut
meets the analytic material of its profile within 1e-5, as G does.

A taper thread takes a chamfered tip: each end's cone is measured from the major diameter the
taper has at that end. Pipe threads are not ISO metric, so they give chamfer_depth.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 3865982820 Thread dialog: the Ends section is Start (None, Chamfer) and End (Square, Fade)
The thread's start is its free end: it runs off plain or chamfered (ISO 4753). Its inner end
stops square in its own profile or fades over a length; an empty Fade Length is ISO 3508's
runout (2.5 P, or 1.25 P for a thread saved short). A thread saved chamfered at both ends keeps
that. "Square" is its own message (thread.end_square), apart from the geometric square. The
new labels are in en, ar, he, ja, zh, de and ko; Extent, Ends, the chamfer labels and the ISO
4753 hint come from the catalog entries already on develop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 13:02:32 -04:00
jyvikoandClaude Opus 5.5 28e3b8a192 Continuity in words: surface dialogs and Continuity Analysis show no G codes
Patch, Boundary and Blend Surface list Position, Tangent, Curvature and Curvature change; each
order's code (G0 to G3) and what it means is in the row's hover text. The Continuity Analysis
legend, its seam markers and its status line use the same words (Crease for a G0 seam). The
segments now draw their labels translated. The new labels carry over each catalog's existing
translation with the code taken off, so no language loses its wording; a word another label
already translates keeps that translation.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:01:05 -04:00
jyvikoandClaude Opus 5.5 1acbe2806f Fillet dialog: plain words for continuity, Corners with Setback out of Advanced
The Continuity G1|G2 control repeated Type (both set `type`) and G1 silently cleared the
corner; it is gone, and Type names the section in words: "Curvature continuous", its code (G2)
in the row's hover text. The vertex choice moves out of Advanced as Corners: Ball | Smooth
patch, shown only while the edges have a corner where three or more rounded edges meet (or the
fillet already has a smooth patch), enabled for Constant radius with Exact fit and saying why
when not. Smooth patch shows Setback: one distance for every corner, sent as `setbacks` at each
corner's vertex; left empty, the command's default (1.5 x the radius) applies. A fillet saved
with setbacks reopens with them: one distance at exactly the dialog's corners shows in Setback,
any other list is kept as saved. "Smooth" in Variable Radius is "Smooth radius change". The
stale "G2 corner construction is not supported yet" tooltip and the "Fit and G2 corners" note
are replaced by new messages (en, ar, de, he, ja, ko, zh).

No command parameter changes; saved designs open unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LUXeKMoxpM7Vuv8Rb6E3K2
2026-10-27 13:01:05 -04:00
jyvikoandClaude Opus 5.5 fafd977b05 Profiler: the Profile operations preference switches recording at run time
- Graphics page: "Profile operations" (off by default) starts and stops the
  profiler when it changes; an agent's diagnostics.profile in between stands,
  and SOLIDCRAFT_PROFILE=1 is not undone by the default at start-up.
- The desktop app reads SOLIDCRAFT_PROFILE at start-up.
- Labels in en, ar, de, he, ja, ko, zh. The pending-messages test compares
  right-to-left pending text in display order, as the catalogs give it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 11:40:49 -04:00
jyvikoandClaude Opus 5.5 fddb57c0d3 Thread dialog: its labels in the catalogs; Arabic and Hebrew pending messages compare in display order
Seven labels of the thread dialog had no English catalog entry, so they stayed English in every
language (every_ui_label_literal_reaches_an_english_catalog_entry): Extent, Ends, Chamfer Angle,
Chamfer Depth, the two ISO 4753 hints and the designation hint. They are in
assets/locales/pending/thread-dialog-labels.json with Arabic, Hebrew, Japanese and Chinese, the
catalogs that must be complete. The ISO 4753 hints are looked up by id, and the designation hint
takes its example as {example}, so a right-to-left language places it where it reads.

pending_messages_are_in_the_catalogs compared a pending message with the catalog's text, which
for Arabic and Hebrew is in display order since #3768; it compares with that order now, as the
catalog stores it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 11:03:55 -04:00
github-actions[bot] 0c16cfefbb Regenerate generated files and fold pending files [skip ci] 2026-10-27 04:40:23 +00:00
github-actions[bot] b2189e3f4d Regenerate generated files and fold pending files [skip ci] 2026-10-27 04:31:59 +00:00
Victor Santos Oliveira 6e12f5954f Navigation: snap free orbit direction and roll with Shift (#6943) (#6949)
* claim: #6943 free orbit Shift snapping

* fix(ui): snap free orbit direction and roll with Shift

* test(ui): align free orbit coverage and complete snap help translations
2026-10-27 04:11:16 +00:00
6848c78424 Sketch Transform: one box with handles to scale, move and turn what is picked (#6004)
* Sketch Transform: scale, turn and move sketch entities in one command and one undo

sketch.transform scales about a centre, turns about it, then moves; the window and its
handles for existing sketch geometry build on it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Sketch Transform window: one box with handles to scale, move and turn what is picked

Select curves and points in a sketch and press G (or Transform in the Modify panel or the
context menu): the picks get a box with a handle at each corner to scale (the opposite corner
stays), the box to move and a knob above it to turn (Shift snaps to 15 degrees). Position,
Width, Height, Scale and Angle in the window are the same values, to type exactly; OK applies
it as one step.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Move the new message to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch Transform: follow the sketch field of Sel::SketchCurve

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 03:34:07 +00:00
b47f82d406 Reopen the designs open at the last quit (#5542) (#6006)
* claim: #5542

* Reopen the designs that were open at the last quit (#5542)

A launch with no file to open reopens the saved designs that were open
when SolidCraft was last closed, in tab order. Designs never saved and
files that are gone are skipped. Preferences > General > Reopen designs
turns it off; a launch driven over --control or with --sample starts fresh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new messages to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 03:34:04 +00:00
github-actions[bot] 78d80e0144 Regenerate generated files and fold pending files [skip ci] 2026-10-27 03:52:42 +00:00
Lars JansenandClaude Opus 5.5 2d629069c6 Dialogs: OK and Cancel at the top (#6708) (#6713)
* claim: #6708

* feat(dialogs): OK and Cancel at the top (#6708)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:42:23 +00:00
github-actions[bot] 237341423c Regenerate generated files and fold pending files [skip ci] 2026-10-27 02:49:11 +00:00
af1d15b5ea Canvas to Sketch: trace a canvas image into a sketch on it (#3931) (#4263)
* Canvas to Sketch: trace a canvas image into a sketch on it (#3931)

New command canvas.to_sketch, offered as Canvas to Sketch in the canvas
context menu. It traces the canvas image (automatic Otsu threshold, light
drawings on dark backgrounds inverted) with interpolated marching squares
and Douglas-Peucker, and adds lines and cubic Bezier splines through Insert
SVG's add_geometry to a new sketch on the canvas plane, with the canvas'
width, centre, rotation and flip. Holes stay holes; one undo step.

The image's declared width x height is checked before decoding (at most
40 megapixels) and the decoder runs under image::Limits, since canvases
are capped by file size, not pixel count.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new message to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 01:39:18 +00:00
github-actions[bot] 84a3a0c478 Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:57:22 +00:00
github-actions[bot] 1551c0acef Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:51:03 +00:00
Lars JansenandClaude Opus 5.5 f1cc49bcdb History: list a sketch under the feature built from it (#6489) (#6494)
* claim: #6489

* feat(history): list a sketch under the feature built from it (#6489)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:59:57 +00:00
5622963b91 Insert SVG / DXF: place, size and turn the drawing before it is added (#2605, #3443) (#3542)
* claim: #2605

* Insert SVG / DXF: place and scale the drawing before it is added (#2605, #3443)

After the file is picked, an Insert SVG (or DXF) window sets the
drawing's X, Y offset and scale, with a live preview; OK adds it in one
step and Cancel adds nothing. The insert commands already took `at`
and `scale`; the window is what was missing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert scenario: the picked drawing goes through the placement window (#2605)

`sketch_toolbar_imports_use_file_picker` expected the SVG added as soon as
it was picked; it now checks the placement window first and adds it with
OK.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: a size in millimetres, an angle, and placement by the drawing's centre

sketch.insert_svg and sketch.insert_dxf take width or height (mm, aspect kept, winning over
scale), angle (degrees) and align (origin or center). The new sketch.drawing_bounds reads a
file's own size without inserting it.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF window: Width, Height and Angle, placed by the drawing's middle

Width and Height in millimetres follow the scale (aspect kept); Angle turns the drawing
about its middle, where X and Y now put it. Uses sketch.drawing_bounds for its own size.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: handles in the viewport to scale, move and turn the drawing

The preview gets its box with a handle at each corner (scales about the opposite corner,
aspect kept), the box itself (moves) and a knob above it (turns, Shift snaps to 15 degrees).
They edit the same X, Y, Scale and Angle the window shows.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert handles: the move that comes with the release counts

A quick drag could stop short of the pointer's last position because the final move arrives
in the same frame as the release.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* Insert SVG / DXF: the Drawing Size command's label in the catalogs

`sketch.drawing_bounds` came without a catalog entry, which the i18n
test requires (and the complete ja and zh catalogs with it).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Move the new messages to a pending locale file

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Nathalie Schönwetter <nathalie@cfw-ag.ch>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-27 00:50:35 +00:00
github-actions[bot] 3bea744823 Regenerate generated files and fold pending files [skip ci] 2026-10-27 01:25:12 +00:00
N3MI-DGandClaude Opus 5.5 e8eb7ee11a Components: copy and paste bodies and components between designs and components (#3390) (#3390)
Squashed for the rebase onto main.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 00:33:57 +00:00
github-actions[bot] 924724dc89 Regenerate generated files and fold pending files [skip ci] 2026-10-27 00:34:00 +00:00
HiroKenEzandClaude Opus 5.5 56bcd872cb Cone primitive: solid.cone with base and top radius (#5641) (#6250)
* claim: #5641

* Cone primitive: solid.cone with base and top radius (#5641)

A cone or truncated cone placed like the cylinder: base centre, axis,
base radius (or diameter), top radius (0, the default, is a full cone)
and height, with the new body / join / cut / intersect choice. It is
built from what the kernel already exposes, a revolve of its half
section about +Z through the origin, moved into place. Toolbar entry
after Torus, a Cone dialog that also places it on a picked face, Edit
Feature, a timeline icon, pending UI strings and attribution, and one
pending design-format change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 23:57:43 +00:00
github-actions[bot] 96e43bb4ef Regenerate generated files and fold pending files [skip ci] 2026-10-26 23:04:43 +00:00
github-actions[bot] 955f5aea43 Regenerate generated files and fold pending files [skip ci] 2026-10-26 22:56:34 +00:00
bherbruckandClaude Opus 5.5 739e442824 Links: ask before following a design's network paths (#7372)
A path a design names (a linked design, a sketch text's font file) now
goes through one rule before any file call: a network location is
reached only once its server is allowed, a device path never. Update
Links and Open Linked Design ask first (Allow once / Always allow this
server / Cancel); Preferences > Design lists the allowed servers and
can allow every network location. component.links reports such a
link's found as unknown with a reason, without looking for it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 18:52:43 -04:00
MAKAOandClaude Opus 5.5 30f951ecf9 Navigation bridge: a device's own app moves the view (#6094)
A homemade 3D input device's driver app (MAKMOUSE) listens on a loopback
port; with Preferences > Navigation > "Navigate with a device app on this
computer" on (off by default), the desktop app connects, says hello and
reads JSON lines: axis motion (orbit, pan or zoom by mode), zoom steps and
standard views. The motion goes through navigation::device like a 3D
mouse's, only in the focused window; a HID device the app names is left
to it. Documented in docs/3d-mouse.md.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-26 22:14:52 +00:00
github-actions[bot] 02458892d9 Regenerate generated files and fold pending files [skip ci] 2026-10-26 22:30:02 +00:00
amolinari-autotex 1d02a5f2d4 Personal Hole parameter presets (#4480)
* feat: add personal Hole parameter presets

* feat(hole): prompt for preset names and recall changed selections

Ask for a name only on Save new or Rename in the kit confirmation. Keep Enter and Escape inside the prompt, preserve cancelled drafts, recall only changed selections, and retain independent recessed-hole bottom choices.

* feat(hole): preserve thread direction and partial depth in presets

Carry Left/Partial, explicit source units and Custom draft guards through personal preset capture and recall. Preserve legacy Right/Full/flat defaults and reject unknown options before changing the form. This production bridge depends on the handedness and graphical-depth changes inherited below it.

* docs(hole): describe supported preset thread options

* feat(ui): save modified hole presets in place

* fix(presets): retain reference placement and current locale contracts

* test(ui): borrow restored preset library during serialization

* test(presets): preserve modal focus with viewport focus restoration

* Use UI kit controls for hole preset selection
2026-10-26 22:00:56 +00:00
github-actions[bot] 610f2e479c Regenerate generated files and fold pending files [skip ci] 2026-10-26 21:16:46 +00:00
Colin Faulkingham 4c7087ec16 Disable Perspective while editing a sketch (#2144) (#4291)
* claim: #2144

* Disable perspective toggle while editing a sketch (#2144)
2026-10-26 20:48:21 +00:00
github-actions[bot] b28decfaf6 Regenerate generated files and fold pending files [skip ci] 2026-10-26 20:30:44 +00:00
Jesper We 436ee95095 Preference: return to the previous view when a sketch ends (#7038) (#7043)
* claim: #7038

* Preference: where the view goes when a sketch ends (#7038)
2026-10-26 19:31:55 +00:00
github-actions[bot] 1ee2532678 Regenerate generated files and fold pending files [skip ci] 2026-10-26 20:00:04 +00:00
Nathan Dane fbcd4852c1 Navigation bar: the view commands (#6585) (#6586)
* claim: #6585

* Navigation bar: the view commands (#6585)
2026-10-26 17:46:15 +00:00
97cce94a1c Agent chat: tool calls read as summaries, raw JSON behind Details (#1457) (#6245)
* claim: #1457

* Agent chat: tool calls read as summaries, raw JSON behind Details (#1457)

Each tool-call card now says what the call did, built from the command's
translated label, its main parameters (lengths in the design's units) and the
bodies the result names: "Extrude Sketch1 by 10 mm", "Box 40 x 30 x 20 mm,
then Fillet 4 edges (r 4 mm)", "Measured Block: ...", "Saved block.solidcraft".
Calls it can't put in words keep the agent's title. The raw arguments (now
kept from the in-app client and ACP's rawInput) and the result sit under a
folded "Details".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Agent chat cards: show file names, never paths; temp files not named

ui.screenshot reads "Screenshot"; save/export/open and other tools' titles
show only the file name. The full text stays under Details and in the tooltip.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-26 17:22:17 +00:00
github-actions[bot] a2ccbd0684 Regenerate generated files and fold pending files [skip ci] 2026-10-26 19:21:19 +00:00
DanielandClaude Fable 5.1 2e566e2c58 Placement handles for Rest, Boss and Snap Fit (#4384) (#5362)
* claim: #4384

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: shared module, with Rest as the first tool

The Rest handles spike becomes a shared module, place_gizmo, so other features placed on a face can
use the same marker and knob. The mechanics (crosshair with its three states, the grab offset, the
footprint while dragging, the turn knob) live in place_gizmo.rs. The handles own the pointer through
canvas::owns_pointer, as the move triad does, so navigation and Select Other's press-and-hold leave
them alone. Each tool is one file under place_gizmo/ that gives a Spec: which dialogs it serves,
which commands' Position input also takes sketch points, where the place is, how the pointer
re-places it, its footprint and its turn, if any. The module lists the tools one per line, so tools
added on separate branches each add one `mod` line and one list line. Rest is the first.

The handles are always on; the preference the Rest spike had is gone. The POINTS accept flag on a
Position input is granted from the tools' Specs instead of a Rest-only arm in the plastic dialog's
start. Handles are published as `rest:position` and `rest:rotate` as before.

Seen straight down, the dialog's height arrow collapses onto the place and its value box sits just
right of it, where it took the press meant for a knob pointing that way. The knob now slides out
along its ray until it is clear of the box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: Boss

The marker moves a boss across the model, also from Edit Feature, and its Position input takes
sketch points while the handles are on, so a screw boss can be dragged onto the centre of a
circle drawn for it. A boss is round, so it gets no knob; the footprint while dragging is its
outer circle. Published as `boss:position`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: Snap Fit

The marker moves a snap fit across the model and its Position input takes sketch points while
the handles are on, so the arm can be put where a sketch says (#3423). The knob points the
catch: it turns between the four directions the Catch Direction combo offers for the face, so
the knob and the combo always agree; the command keeps only those four, so there is no free
turn. The footprint while dragging is the arm's foot, its thickness behind the place and its
width across. Published as `snap_fit:position` and `snap_fit:rotate`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Placement handles: the look in one file

Everything that draws the handles (the crosshair and its three eased states, the knob's ball, the
cased lines, the angle label, the colours) moves from place_gizmo.rs into place_gizmo/look.rs, so a
restyle touches one file and the mechanics (hit radius, drags, knob geometry) stay where they are.
No change in behaviour.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: behind a Design preference, off by default

The handles sit behind Preferences > Design > Placement > Placement handles (`placement_handles`,
also through `ui.prefs`), off by default as the hole placement work in #2912 is: a Rest, Boss or
Snap Fit is then placed by its click alone, its Position input takes faces only, and no handle is
drawn or published. The tests switch the preference on; one checks the default.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the tests hide the origin through set_origin_shown, as main does since #1849

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the move marker as designed in the prototype, drawn with theme tokens

The marker is a dot with four arms to the screen cardinals: short and dotted at rest, longer with open arrowheads when pointed at, solid while dragging, each state growing out of the previous one (360 ms). Sizes are the prototype's. Its core is the icon highlight and its casing the marker halo, the tokens main's hole handle uses, so the literal allowance goes. The tip shows while pointing, not during a drag.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the dialog's drag arrow stands above the move marker

With the handles on, the Height arrow started at the marker's centre and ran through its upper arm, head on arm tip. The arrow now keeps the marker's full reach and a gap free at the base, its shortest length grows by as much, and the base dot is left to the marker. Other dialogs are unchanged (clearance zero).

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: a turn ring on the face replaces the knob

The ring lies on the face about the move marker's centre, drawn in perspective, a fixed 65 px on screen like the move triad's arrows (it is a control of something on the screen, not a measure of the model). At rest it is a short dotted arc with an open chevron grip just outside; pointed at, the dotted circle opens from the grip both ways round and the grip slides in and fills; while turning, a solid arc around the grip. Dragging the grip turns the feature as the knob did, through the same handle name, so the harness tests stand.

The floating value box yields: with a handle's centre under it, it moves to the other side of the arrow's tip or above it, since seen straight down the box sat exactly where the grip is. A handle the arrow's stem crosses keeps the pointer.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: a compass while turning, and the turn pulled onto the face's compass points

Four ticks just outside the ring at the face's in-face world directions (the ones the Snap Fit combo names, +X, −Y, …) appear while turning and stay put, so you can see how far you have gone. A Rest's turn is pulled onto one of them within 8°, otherwise it steps by 5° as before; Alt or Ctrl frees it. The readout beside the grip names the point it sits on ("90° · +X") and keeps clear of the ring.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the footprint in the preview's blue, the idle handle steps back

The footprint drawn while the marker drags is a filled shape in the preview's own blue with a thin darker edge, not a white outline, so white stays reserved for what can be grabbed. While one handle is dragged the other fades to a quarter and comes back when the drag ends.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the ring in the preference text, the docs and the tests' wording

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the look as tuned in the app

Marker: drawn to the redrawn design (dot r 3.9 pt, two dashes per arm, a filled head 8.7 × 7.1 pt whose base is where the outer dash began); pointed at, the outer dash becomes the head (its far end narrows to a point, its near end widens); dragging runs the inner dash on into the head as a shaft. Every casing is 0.4 pt outside the edge, for lines, heads and the dot alike.

Ring: the grip and the compass lie in the ring's plane like the circle, so the grip is never skewed against it; the grip is a thick chevron with a hole that flattens into the base as the grip slides onto the ring, and fills; the dotted circle stays while turning, with the solid arc laid over it; opening eases in and takes 0.3 s, leaving is a 0.15 s fade over the resting ring, not the sweep backwards; a drag keeps the angular gap of the press, so the grip does not jump onto the pointer; the compass ticks and the readout's point name are in their axis colours, and the grip takes the axis colour (eased) while aligned with one, with that point's tick left out; free turning keeps a hair of pull (0.5°) so an axis can still be hit; the readout wraps to a half turn.

Value box: with a ring it keeps out of the circle the ring, grip, compass and readout sweep, one place per view, nothing moves when a turn starts; also when the value does not evaluate and there is no arrow.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the readout shows a half turn as 180°, not −180°

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the motions in one place

The animations the handles grew (a factor eased in and out each way on its own time and easing, a handle stepping back while the other works, a colour that comes and goes from the last one it was on, the gap a press keeps for its drag, an offset that slides instead of jumping) move out of place_gizmo into motion.rs, so the next manipulator reuses them. The look's timings become Transitions in look.rs. No change in behaviour: the contact sheet before and after is identical, the harness tests stand.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

* Placement handles: the axis colours as main names them since #4430

The compass and the aligned grip take the one set of X, Y and Z colours (axis_x, axis_y, axis_z); the Move gizmo's own array is gone.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

---------

Co-authored-by: Claude Fable 5.1 <noreply@anthropic.com>
2026-10-26 15:35:10 +00:00
github-actions[bot] 2016ba71f4 Regenerate generated files and fold pending files [skip ci] 2026-10-26 18:07:03 +00:00
Colin Faulkingham b55f30959d AI Preferences: reflect agent authentication results (#2578) (#4253)
* claim: #2578

* fix: reflect agent authentication in login badges (#2578)
2026-10-26 11:57:00 +00:00
github-actions[bot] a078d4e7e9 Regenerate generated files and fold pending files [skip ci] 2026-10-26 17:30:10 +00:00
Dahak BuildsandDahak Builds 6f5f64f2d9 Viewport: perspective while orbiting, orthographic on face-on views (#2682) (#6700)
* claim: #2682

* WIP: perspective-while-orbiting with auto-ortho on face views

---------

Co-authored-by: Dahak Builds <dahakbuilds@users.noreply.github.com>
2026-10-26 11:14:14 +00:00
github-actions[bot] b20f522f5d Regenerate generated files and fold pending files [skip ci] 2026-10-26 16:34:07 +00:00