expected.json `continuity`: over the tangent seams wholly within `within_mm`
of `near`, the curvature jump across them (exact surfaces, 65 stations a
seam) at most `curvature_jump_per_mm` clear (`clear_mm` along the seam) of the
vertices where two of them turn, where a neighbour's own G1 seam ends.
07/015, the box corner's three r5 rounds with corner: g2: one valid body of 10
faces within the box, its patch's twelve seams jumping at most 1e-3 per mm
clear of the hole's six corners by 1.2 mm (2.7e-4 measured; the ball corner
of 009 jumps 0.2). Its golden entry is the passing run's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
doc: world_state, world_state_reusing, state_in_frame_at, state_in_frame, face_point_state,
face_point_names and construction_state return Result. A body that could not be placed, a
frame that could not be inverted, a sketch plane or thread axis that did not survive the
placement, or a failed placing worker used to leave things where they were without a word;
now the call fails with what could not be placed. is_placement is the one test of an
occurrence's placement (finite, a rotation that does not mirror, a translation within
1e9 mm). Opening a design names every occurrence that fails it; add_occurrence refuses
one; a joint solution that would place an occurrence outside one is not applied and the
joints placing it report it.
engine: Session::world_state returns Result and keeps a failure in its cache as it keeps a
placed model. bounds, home_camera, open_sketch_plane, the scene builders, the world
previews, frames::to_local and auto_operation pass the error on; helpers answering "not
found" take the placed model from their caller. Commands setting a placement check it
(valid_position, exploded view, fastener at a point, STEP insert matrix).
ui: panels, picks and hovers read the session's placed model through
open_meshing::session_world; a model that cannot be placed shows no placed bodies, and the
viewport says why across its bottom. Pictures and the control channel report the error.
cli, mcp: snapshots, renders, benches and the oracle report the error; the kernel-case rig
records it as the case's failure. Tests read the new Results with unwrap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
A rig case whose SMLib call fails left nothing to replay it from: nothing called
solidcraft_smlib::set_dump_dir. `solidcraft-cli kernel-cases --dumps=DIR` now points SMLib's
dump folder at DIR/<area>-<case> before each case runs, so a failing call leaves its
arguments and B-reps there (smlib_brep_read reads them back into a scratch C program), and
turns it off after the run. Off without the flag. The kernel exposes it as
smlib_dump_dir, beside smlib_built (the CLI reaches SMLib only through the kernel).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
truck-modeling, -topology, -shapeops, -stepio and the vendored truck-geometry, -meshalgo,
-shapeops, -stepio and matext4cgmath (with their attribution rows and vendor notes) are removed.
The kernel-cases runner has one kernel, SMLib, and no build-mismatch check; a modelled thread is
cut by SMLib's exact screw-swept groove (the faceted groove path is gone).
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
Body::mesh / mesh_plan / mesh_of and MeshTolerance (chord, display, display_of, export_of)
replace tessellate, tessellate_with, display_mesh*, display_plan*, reference_display_mesh_angular;
every caller in kernel, doc, engine, io, ui-egui, gpu and the CLI renamed mechanically; the
truck-mesher fallback, mesh_shells*, refined* removed; Body::new orients from the planner;
truck-meshalgo dropped from Cargo.toml with the tests of its hooks. Still to fix: trait imports
in tess/*, splitface/lumps/preview/step_in/boolean_record meshalgo uses, measure.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The kernel accepts `truck` (as well as unset) for its truck backend, and
`boolean_kernel()` reports that backend as `default`. The rig compared
the raw setting with that name, so a run with SOLIDCRAFT_KERNEL=truck
reported every case as "this build runs booleans on the default kernel,
not truck" instead of grading it. The rig now names unset, empty and
`truck` alike as `default`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
All operations move to SMLib at once, so the selector is no longer the booleans' own:
`SOLIDCRAFT_KERNEL=smlib|truck` (read once, unset is truck, the same refusals for an unknown
value or SMLib in a build without it) is answered by `solidcraft_kernel::backend()`
(crates/kernel/src/backend.rs), which every operation's dispatch calls. The boolean's SMLib path
moves to smlib_boolean.rs. The regression rig's kernel check (`boolean_kernel`) now answers from
the switch, and the rig and CLI set SOLIDCRAFT_KERNEL.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
Two faults made simple curved solids look open (#818's blind hole: 80 open edges, a stadium
slot: 52):
- It meshed with `refine`, the measuring mesh, which splits triangles across curved faces on
their own and leaves T-junctions on the edges they share with neighbours. It now checks the
display mesh, whose faces share each edge's points.
- It matched vertices by rounding to a 1e-6 mm grid, which splits points a rounding error apart
across a cell boundary. It now joins vertices closer than `tolerance.weld_mm` (default 1e-4 mm).
Both cases now have 0 open edges, also with the weld at 1e-6 mm.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
For the history areas' cases (threads, tessellation):
- A count may be an inclusive range `[min, max]`, where the geometry only bounds it (a modelled
thread's faces).
- `"watertight": true` meshes each body (chord tolerance `tolerance.mesh_mm`, default 0.01 mm)
and requires no open and no over-shared edges, with vertices matched by position.
- `"timeout_s"` gives a case longer than the run's timeout, at most 30 min.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What the complexity ladder needs from the rig's case runner, kept in the one runner:
- A script may name a `base` case directory: that case's commands (and its own base's, up to
32 deep) run first, so a ladder case starts from the previous tier's finished part without
copying its commands. `$CASE` is each recipe's own directory; `$OUT` is the running case's
scratch directory, in its bases too.
- `missing` in expected.json reports the case as not supported yet without running it: a
capability with no command or parameter (multi-start threads, fillet setbacks) stays visible
instead of being faked with a stand-in.
- Each result carries `seconds` (the commands' own time, without process start or grading) and
`measured` (body count, face/edge/vertex counts, volume, area), for the ladder's golden.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
`"outcome": "solid_or_refused"` takes a clean refusal, or else grades the result as usual. Two
bodies that touch along a circle only (#168, #3841) have no one-solid union: a refusal or the two
bodies left apart are both right; fusing them is wrong. The two cases said opposite things
(two bodies, a refusal) and now agree.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- `"shells": N` in expected.json grades the total number of shells: a body with a sealed void
holds two, and some joins keep several lumps in one body. Those cases (#3175, #3455, #3526,
#3730) are graded on validity again instead of being marked not valid.
- When SMLib's record conversion says "not supported yet" (revolved surfaces, traced intersection
curves), its check gives no verdict. That's shown but not graded, since it isn't a fault of the
body. solidcraft_kernel::SmlibCheck carries the three outcomes.
- `$OUT` in a recipe is a scratch directory outside the repository, for files a case writes. The
two STEP-export crash cases write there instead of /tmp.
- cargo xtask kernel-cases --results FILE keeps every result as JSON.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- solidcraft-cli and solidcraft-engine forward an `smlib` feature to solidcraft-kernel/smlib, so
`cargo build -p solidcraft-cli --features smlib` gives the rig SMLib's check.
- solidcraft_kernel::boolean_kernel() says which kernel this process runs booleans on.
`default` until the SMLib switch (SOLIDCRAFT_BOOLEANS=smlib) lands and answers there. An smlib
run on a build without the switch reports "not supported yet" instead of grading the default
kernel under SMLib's name.
- An area may keep its skipped list in parts (skipped-<part>.json).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every geometry case the old kernel got wrong becomes tests/kernel-cases/<area>/<id>/: an
engine script or oracle recipe, and expected.json with the right answer, from analysis or a
hand calculation, or else the invariants. Never a kernel's output.
- solidcraft-cli kernel-cases <dir>...: runs a case and grades it. The checks are the outcome
(succeeds, or refuses cleanly), the body count, and one closed shell per body that passes the
record's structure and geometry checks and, with SMLib built, SMLib's check(All). Counts,
volume, area, centroid and box are graded where the case gives them. Each run is pass, fail,
not supported yet or crash.
- cargo xtask kernel-cases [--kernel default|smlib|both]: one process per case, so a native crash
or a hang (--timeout) is that case's result. It writes docs/kernel-cases.md: coverage per area
and source, results per kernel, and the sources looked at and skipped (<area>/skipped.json).
- solidcraft_kernel::validity and smlib_built, which the rig's checks use.
tests/kernel-cases/README.md gives the format.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>