Commit Graph
11 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 0eacff3ee4 brep: orientation, not position, tells a face's outer loop
truck lists some planar faces' hole loops before the outer loop, so the
rule that loops[0] is the outer loop never held for truck's records; moving
it in the adapter would renumber those faces' edges, which history and
names stand on. The outer loop is the one that runs counter-clockwise about
the natural normal (what check_geometry checks); the order is the
producer's, and SMLib's import puts the outer loop first, as SMLib needs.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:58:14 -04:00
jyvikoandClaude Opus 5.5 bff2379abc brep: check_geometry refuses loops that enclose no area or turn the wrong way
check_geometry compared pcurve ends with edge points only, so a loop whose
pcurves enclose nothing passed whenever its uses lift onto the same 3D points:
SMLib's hole-rim fillet with both seam uses on u = 0, or a whole sphere whose
pole-to-pole seam has both uses on one line (the continuity check skips the
pole). Such a face has no surface and meshes to nothing.

Each edge loop's signed (u, v) area is now taken over 16 points of each use's
pcurve: a loop within 1e-9 of the square of its extent of zero is refused
(Problem::Empty), and each face must have exactly one counter-clockwise loop
about the natural normal, the rest clockwise (Problem::Turn). Outer and inner
are told apart by area rather than position, because the truck adapter writes a
face's wires in truck's order, which puts a hole first on some planar faces of
the sample designs (the model cache test caught it).

Fixtures: the pole-to-pole seam on one line, and a sheet whose plane axes are
swapped so its loop runs clockwise; a seamed sphere passes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:55:17 -04:00
jyvikoandClaude Opus 5.5 fa68b66c56 brep: splines closed on themselves are periodic for pcurves and tessellation
A spline surface whose first and last control rows coincide in a direction
(points and weights, knots clamped there) closes on itself, but the display
evaluator's domain gave NURBS no period. The pcurve routine therefore never
moved a seam's second use by a period: SMLib's fillet round a hole's rim (a
rational spline closed in u) got both seam pcurves on u = 0, its outer loop
enclosed no (u, v) area, the decoded face tessellated to nothing and the body
measured 6839.73 mm3 against SMLib's 6989.00.

tess::uv::closed detects the closure from the record, within 1e-9 of the
control net's extent; the domain then has period = the active knot interval's
width, and the evaluator wraps a parameter outside that interval back inside
it, so pcurves, projection, sizing and the display plan all treat the direction
as periodic. The record stays as it is. The display plan hands both evaluators
wrapped parameters (the GPU does not wrap).

Tests: a rational torus band, a NURBS cylinder and a NURBS dome with a pole,
each bounded by a seam used twice, get seam pcurves one period apart; a record
of the band passes check_geometry and its seam uses on one line are refused;
SMLib's hole-rim fillet decodes with every face meshed and SMLib's volume
within 1e-3.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 02:52:36 -04:00
jyvikoandClaude Opus 5.5 9823cf46c7 brep: a budget of 4,000,000 items, pcurves included
Schema 4 counts every pcurve's control points as items, which schema 3 had
none of, so a body that fitted the old 1,000,000 no longer does (a STEP
plate of 50k faces). The binary envelope's own caps on bytes, values and
entries per collection still bound a body.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 01:55:38 -04:00
jyvikoandClaude Opus 5.5 884b4221e2 brep: document check_geometry in the validation section
What it checks, against which tolerance, its bounded cost, that it is a
spot check rather than a certificate, and that the truck adapter runs it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 00:48:03 -04:00
jyvikoandClaude Opus 5.5 5b7525ddb6 brep: cones narrowing along z, and a linear duplicate-shell check
SMLib makes narrowing cones with a negative half angle; schema 4 now takes
them as they are (r(v) = r0 + v tan a already covers them), with the
natural v range below the apex. The check that no region lists a shell
twice was quadratic per region (about 1e9 comparisons at the caps); it now
remembers the last region that listed each shell.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 00:29:30 -04:00
jyvikoandClaude Opus 5.5 f6fa9e808a kernel: the truck adapter writes pcurves through brep::pcurve
The adapter now saves each edge's curve record and interval when the edge first appears and
computes every face's pcurves from those records and the surface record it writes, with the
shared plain-record routine; the truck-face version in native/pcurve.rs is deleted. Loops go
in as the record keeps them (relative to the surface), so a reversed face no longer has its
wires reversed and back again.

The native tests are ported (adapter::face_alone gives one face's record for them). The cut
body's intersection pcurves now fit at 1e-6 mm too: the routine follows the converged
intersection, and truck's own points are within its 1e-6 mm of it, which the lift check
allows for on intersection edges. docs/native-brep.md says where pcurves come from and what
a surface intersection's point at t is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-21 00:14:18 -04:00
jyvikoandClaude Opus 5.5 6b9d6727a7 brep: docs for schema 4, and a pcurve lift test
docs/native-brep.md describes schema 4: the records with their SMLib and
STEP names, regions and shells, the loop convention, every edge's uses,
the canonical order (a reversed face walked backwards), each curve and
surface kind's parameterisation, pcurve rules, validation, history, the
SCBREP05 envelope and what the truck adapter writes and refuses.

A test lifts every pcurve of a box, a filleted box with a bore and a
sphere onto its face and checks it is its own edge at both ends and the
middle; with a reversed face's pcurves left in truck's oriented order it
fails by 30 mm.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-20 23:23:40 -04:00
bherbruckandClaude Opus 5.5 d0afc31632 Save the evaluated model with every design: exact, stored once, scaled caps (#3053) (#3093)
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: say why bodies were not kept

* Exact planes and revolutions; budgets for large bodies (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: the model cache and the exact native B-rep (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: time a save without the cache too

* Model cache entries are Deflate-compressed (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Model cache: one that does not fit the design file is left out, never a failed save (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 02:31:08 +00:00
selune 913583bfee Show a bounded native-cache preview before authoritative reconstruction (#463)
Refs #303. file.save / file.save_as can store a warm native geometry cache (cache: true, off by default) keyed to the document hash, app version and adapter revision. Opening shows a bounded preview from it until the rebuilt session replaces it. Any cache failure counts as a miss.
2026-10-13 02:54:01 -04:00
selune 9f88537927 Define a kernel-neutral native B-rep format and guarded adapter (#461)
A SolidCraft-owned portable B-rep schema (geometry schema 2 with analytic curves and surfaces, explicit frames and ranges, fitted intersection curves) and a versioned body envelope (SCBREP03) with its own metadata records, a bounded binary codec, a validator with resource budgets, and an adapter that refuses what it can't convert exactly. Pinned by a box-and-fillet golden fixture. Not yet written by application saves. Refs #303.
2026-10-13 00:13:29 -04:00