Commit Graph
20 Commits
Author SHA1 Message Date
26f42ae09b Snapshot: draw a see-through appearance see-through, and show a tool body inside its target (#2329) (#2330)
* Snapshot: draw a see-through appearance see-through, and give the CLI --body, --tool and --section

A headless picture dropped a body's opacity: the scene carried only a colour, so a design with
a translucent appearance was drawn opaque by `solidcraft-cli snapshot`, by MCP screenshots and
in a design's thumbnail, although the window has always drawn it as glass. There was then no
way to look at the body a cut would remove inside the material it meets: only a volume to
measure and reason about, which hides exactly the errors a picture makes obvious (a tool that
stops short, or lands in the wrong place).

- `SceneMesh` carries the body's opacity; `view::build_scene` takes it from the design
  (`model_body_opacity`), and a selected body stays solid so the selection colour reads.
- The GPU capture routes a see-through body into the scene's glass at its own alpha, as the
  viewport does; the CPU rasterizer draws the solid bodies first (they own the depth buffer),
  then the see-through ones blended over them, far sides before near sides and without writing
  depth, so what lies inside shows and a line between the two is not hidden.
- `snapshot --body NAME:opacity=0.3,color=#rrggbb`, `--tool NAME` (that body solid in the tool
  colour, the rest see-through) and `--section z=27` run the commands the app itself runs
  (`appearance.assign`, `inspect.section`): the options are shortcuts, not a second renderer.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Tests: measure the tool colour as it is drawn through a see-through target

The tool-colour filter was derived on paper and demanded a red more than twice either other
channel, which the target in front of it tints away (measured: (200, 108, 85) through opacity
0.3); and the colour check painted the tool, which a solid target hides.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* fmt

* Snapshot options: strip the colour's # rather than slicing it; README

Slicing `value[1..]` on an input-derived string is what the house rules ask us not to write,
even where a length check has already made it safe. The error a failed assignment reports now
names the body rather than claiming it came from --body, since --tool reaches it too.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* --tool: assign the bodies around the tool in groups, not one command at a time

Each appearance.assign is an undo step with a document snapshot behind it, so one per body
made --tool cost grow with the size of the design for no reason: the bodies around the tool
all get the same opacity, and the ones that share a colour can be named in one call. A design
whose bodies all wear the default grey now costs two commands whatever its size.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

* Rasterizer: say where its glass and the GPU's differ

Splitting each see-through body by facing orders its own two layers; it does not sort across
bodies, which the GPU does. Worth stating rather than leaving a reader to find it.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:10:45 -04:00
bherbruckandClaude Opus 5.5 f3505f0db6 World placement on all cores (#3053) (#3123)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-19 15:43:22 -04:00
DuBearte b04e0801d6 Per-command timings for script runs and batches (#1868)
Thanks @DuBearte.
2026-10-17 07:26:20 -04:00
Irakli Kourtis 1a0b33fcf3 Headless pictures draw on the GPU, with the viewport's pipelines (CPU rasterizer as last tier) (#1555)
Thanks @jyviko.
2026-10-15 22:19:26 -04:00
NOWN-DEV b3df2c382b snapshot --camera and saved views; grid: false / axes: false for headless renders (#1313)
solidcraft-cli snapshot takes --camera JSON and --view with a saved view name (through view.apply, as the MCP screenshot does), plus --no-grid and --no-axes; the MCP screenshot and ui.render take grid/axes, the headless render skips a hidden origin axis, and the app's ui.render follows the Grid and Origin switches. Closes #1245.
2026-10-15 02:59:56 -04:00
Mateusz Sych 1473893b08 MCP: a bridged server starts without the app and connects once it runs (#1298)
The bridged MCP server starts when no app is listening, says so in its instructions and in each tool error, and connects on the first call after the app starts. A batch that could not be sent says the app is not running. docs/mcp.md describes it.
2026-10-15 02:13:18 -04:00
Mateusz Sych 96356dc544 CLI snapshot takes --in; an unknown command suggests close ids (#1301)
snapshot starts from --in (a design or STEP file) with the script on top, as run does, and refuses options it doesn't take; an unknown command id names the closest registered ids.
2026-10-15 02:13:14 -04:00
bherbruckandClaude Opus 5.5 9eddb1cbd3 Preferences ▸ Graphics ▸ Display quality (Coarse/Normal/Fine/Ultra) (#1287) (#1319)
* Preferences ▸ Graphics ▸ Display quality: Coarse, Normal, Fine, Ultra (#1287)

A viewing preference that sets how finely the viewport tessellates curved faces and edges:
chord tolerance relative to each body's size (3e-3, 1e-3, 3e-4, 1e-4) and the most a facet may
turn (30, 20, 12, 7 degrees). Normal is the tolerance the viewport has always used.

Bodies keep a display plan per level, so switching is a re-plan the first time and instant
after; the reference mesh the model reads (picks, holes, measuring) and exports are unchanged.
Away from Normal the model scene builds edges, and faces on the CPU path, from the plan at that
level, so silhouettes and edges get finer with the faces and a highlight still lies on the
displayed triangles.

The preference is saved with the others, set over the control channel (`ui.prefs`
`display_quality`), labelled in en/de/ja/ko/zh. `solidcraft-cli bench-open --display LEVEL
[--edit NAME EXPR]` times the plans at a level and after a parameter edit.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Highlighted edges follow the display quality too

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 02:06:49 -04:00
NOWN-DEV 2e7f41710b run and eval can write their JSON to a file (--json-out) (#1242) 2026-10-14 20:18:17 -04:00
selune a261aaa841 Render: integrated workspace, preview image jobs and opaque PBR (#1046)
Lands the Render workspace (R3), bounded preview-image jobs with cancellation and atomic PNG export (R4a), and opaque PBR looks as one change.

- Render workspace: an overlay-free product preview on the installed GPU device. Returning to Design restores its camera. render.scene and render.settings.apply are added.
- Image jobs: render.preflight/start/status/cancel/export run bounded CPU preview jobs. Export captures the job, overwrite choice and document, and checks the caller's file scope before writing.
- Opaque PBR: looks can carry metal fraction, roughness and dielectric IOR. The product viewport and preview PNG use them; geometry and mass are unchanged. The v1 catalog export refuses PBR rather than dropping it.
- Render setups and PBR looks are saved under design format 21. Labels are in en/de/ja/ko/zh/ru.

Supersedes #706 and #800. Refs #620, #673, #756, #1004.

Contributed by @0xlillith.

Co-authored-by: lillith <35337584+0xlillith@users.noreply.github.com>
2026-10-14 19:24:36 -04:00
bherbruckandClaude Opus 5.5 6de8f6db95 Agent-built designs: stop redoing whole-design work on every command (#1148)
A design built over MCP is many small commands, and each one did work over the
whole design, so building or showing a 1,300-body design took minutes:

- moved components were transformed and meshed again after every change; world_state
  now reuses each placed body whose definition and placement are unchanged
- next_d_name searched the design once per candidate number
- Document::eval evaluated every parameter for every expression; now only when the
  expression names one
- param_rows' used_by was quadratic; the desktop no longer gathers completions on every
  change while no text box has focus

solidcraft-cli bench-agent builds a generated ~1,300-body bicycle command by command
and times it (241 s -> 16 s here). Eval output is unchanged apart from timings.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 13:48:39 -04:00
Lasse LianandSychPL ec8e739aad Export a design's timeline as a replayable command script (#1045)
timeline.export_script (and solidcraft-cli script) writes a design's history as a command script that solidcraft-cli eval replays into the same design, so a bug that only shows on one design becomes a one-file repro. timeline.add restores one stored feature with its id, names and references, through the same checks a design file gets when it opens.

Closes #886. SychPL's #1078 approached the same issue independently; thanks to both.

Co-authored-by: SychPL <SychPL@users.noreply.github.com>
2026-10-14 09:06:24 -04:00
bherbruck 2f91338d3d Large STEP imports: no more multi-minute hang, shared STEP text, cancel and progress (#925) 2026-10-14 05:01:12 -04:00
Nathan Dane 9f76cca8b4 Collect application resources for #433 (#833) 2026-10-14 00:49:32 -04:00
bherbruck 6c61442bb2 Open large designs faster: meshes, face names and Measure on all cores (#916)
Display meshes after opening, the face names read when a feature finds a face by name, and inspect.measure over all bodies are now worked out per body on plain scoped threads (solidcraft_kernel::for_each_on_threads / map_on_threads), in body order and with the same results; the browser build stays serial.
2026-10-13 19:49:04 -04:00
bherbruckandClaude Opus 5.5 fe3717f2e4 fix: control port needs a per-launch token; MCP tool annotations tell the whole truth (#205) (#901)
solidcraft --control PORT writes a random per-launch token to a user-only file (<data>/control/PORT.token; 0700/0600 on Unix, icacls on Windows; SOLIDCRAFT_CONTROL_TOKEN overrides) and refuses any connection whose first request lacks it. mcp --connect, the demo and packaging smoke clients send it. MCP execute/batch/open/save/export/screenshot are annotated destructive and open-world, new_design destructive. Docs: control-protocol.md, mcp.md, AGENTS.md, pending release note in releasing.md.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 18:51:19 -04:00
Kevin Ravensberg 96f6424aec fix: confine MCP agents' files to allowed folders; recovery discard deletes only recovery entries (#205) (#578)
Agent tool calls (MCP, and bridged control requests carrying allow_paths) reach files only in the open design's folder (strictly inside home or the temporary folder, not in a hidden folder, and never its hidden files), the app's recovery folder, the server's private scratch folder and each --allow-path; --allow-any-path lifts the limit. Paths are resolved first, so .. and symlinks that lead out (including a save through a link, #845) are refused. On Windows, UNC, device, NT, verbatim non-drive, drive-relative, alternate-stream, reserved-device and 8.3 short-name paths are refused before any file system call, and the resolved path must be on a local drive. doc.recovery_discard and doc.recover {discard} delete only real recovery entries. Docs: mcp.md, control-protocol.md, README.
2026-10-13 18:24:08 -04:00
selune 006a23a767 Add design containers with deduplicated blobs and JSON compatibility (#327)
* Add fast design containers with lossless deduplicated payloads

* Keep display caching opt-in to avoid default save overhead
2026-10-12 19:15:41 -04:00
NOWN-DEVandClaude Opus 5.5 3938e267bb fix: fail solidcraft-cli run when a timeline feature fails (#402)
A parameter change can break a feature without failing the command that
made it; parameters.change reports it only in its `errors`. `run` then
exited 0 and exported the bodies as they were before the failing feature:
a shrunk sheet-metal tray whose unfold failed came out folded, without
the holes and cut-outs made after the unfold.

`run` now checks the evaluated timeline before writing anything. Any
feature with an error fails the run with status 1, lists the failing
features on stderr and writes none of the --out and --save files, as a
failing command already does. --allow-errors writes them anyway. `eval`
is unchanged and still reports the errors in its timeline.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 18:45:10 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00