Commit Graph
84 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 207cb82818 Wave 327/509: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- f8c2fba07 jyviko: STEP import: FILE_DESCRIPTION and the preprocessor name a Y-up exporter again
- 5cc0d5e9c jyviko: Threads: a metric size without a coarse pitch suggests its fine pitches again
- e0545b2bd jyviko: Measure: an arc edge's angle is its span on the circle, not its NURBS parameter
- ae5dc2416 jyviko: Split Body: a face tool runs over its own surface's parameters

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 22:11:05 -04:00
jyvikoandClaude Opus 5.5 77f1bd1c1d Wave 308/509: STEP import: a torus face round most of its tube is formed within one turn of it
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- c070f044a jyviko: STEP import: a torus face round most of its tube is formed within one turn of it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 18:52:45 -04:00
jyvikoandClaude Opus 5.5 dca61e72be Wave 305/509: step_in tests: the import's repair notes for added seams and turned faces (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 6055ce6fd jyviko: step_in tests: knot multiplicities refused per knot, then by their sum
- ae393fd9c jyviko: step_in tests: a face with too many bounds is refused by the reader's own limit
- fc3a13f17 jyviko: step_in tests: the import's repair notes for added seams and turned faces
- 4688c0f20 jyviko: STEP import: a whole round face whose seam is off its frame's quarter lines is turned onto one

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 18:14:38 -04:00
jyvikoandClaude Opus 5.5 01aaf872b0 Wave 304/509: STEP import: a circle edge between two vertices is the arc between them, however short (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- d2858cb3d jyviko: STEP import: a circle edge between two vertices is the arc between them, however short
- 8b4b4a9d6 jyviko: SMLib pcurves: an end SMLib moves within the tolerance it held the edge at is mapped
- 6c355fdf7 jyviko: step_in tests: the cube fixture's edge directions clear of the assembly fixtures' ids
- efdc245d1 jyviko: step_in tests: a face the reader refuses leaves the rest of the solid as surfaces, named

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 18:02:29 -04:00
jyvikoandClaude Opus 5.5 20aedb330d Wave 302/509: STEP import: a round face off its frame's quarter lines is formed within one turn (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 2dd505d83 jyviko: kernel tests: rustfmt
- ee4d4b5a5 jyviko: STEP import: a round face off its frame's quarter lines is formed within one turn
- 97a31c0c0 jyviko: SMLib: the prebuilt where a union that seals a void keeps its enclosing shell first

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 16:40:45 -04:00
jyvikoandClaude Opus 5.5 6d5a12789e Wave 301/509: STEP import: a part's later instances in a window wait for its first, not end the window (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 025344dee jyviko: A refused face is tinted as well as ringed
- 25642b6d2 jyviko: STEP import: a part's later instances in a window wait for its first, not end the window
- c1713994f jyviko: Body::unmeshed_faces counts on the coarse plan, without making the mesh
- d0081b235 jyviko: kernel: a placed copy is planned as its original, moved, as its mesh already is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 09:05:22 -04:00
jyvikoandClaude Opus 5.5 14ae2c6996 Wave 300/509: A part the modelling kernel refuses is named, with what is wrong and what to do (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 188011736 jyviko: A part the modelling kernel refuses is named, with what is wrong and what to do
- d3b8c3dc5 jyviko: Browser: Repair Part is planned under #8371
- c15c39443 jyviko: Open and import card: the step marks share one box, size and stroke
- 090fcec6c jyviko: A refused face is ringed in the error colour while the window points at it

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 15:40:00 -04:00
jyvikoandClaude Opus 5.5 e8d0bd9c20 Wave 299/509: STEP import: the feature's warning says in words what became of the parts
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 920acc527 jyviko: STEP import: the feature's warning says in words what became of the parts

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 08:57:39 -04:00
jyvikoandClaude Opus 5.5 7314e9440c Wave 296/509: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 97721ad05 jyviko: Fillet setbacks not past where the rounds meet are refused naming the least; the rig grades a refusal by its reason
- 3fd5e138c jyviko: kernel: rustfmt
- 61a1f8bf2 jyviko: STEP import: a face's NURBS form ends where its boundary does, within its tolerance
- cd4f72572 jyviko: STEP import: a surface model's closed shell beside a sheet is a solid of its own

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 15:14:34 -04:00
jyvikoandClaude Opus 5.5 65b02ff7ab Wave 292/509: STEP import: a refused solid comes in as a surface body of its exact faces (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- fd5319a0e jyviko: docs: the kernel's move from truck to SMLib, as written up on #4012
- 4cb0d6ee9 jyviko: STEP import: a refused solid comes in as a surface body of its exact faces
- e19785620 jyviko: STEP import: a refused solid's surface body faces as the file has it
- 529fb7cf3 jyviko: Release: macOS builds on macos-15 (GitHub retires macos-14 on 2026-11-02)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 12:48:43 -04:00
jyvikoandClaude Opus 5.5 53f4d607e2 Wave 291/509: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 5a596dd95 jyviko: STEP import: a patch side collapsed within its vertex's tolerance is a pole of the loop
- cfee4a720 jyviko: STEP import: a solid no B-rep can be made of is shown as a mesh of the faces that read
- 5bfecd8a0 jyviko: Tessellation: a loop corner on a side collapsed within its vertex's tolerance is a pole; a face no method plans is left out, named
- 0102f95dc jyviko: Tessellation tests: rustfmt

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-28 08:06:13 -04:00
jyvikoandClaude Opus 5.5 fceb07b797 Wave 283/509: STEP import: an edge through a face's pole is split there (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 0694fd4e8 jyviko: STEP import: an edge through a face's pole is split there
- 1d70ac267 jyviko: tess: a face whose boundary still crosses itself after untangling is filled leniently, not the whole body refused
- 77bd85cab jyviko: cli: snapshot --quality coarse|normal|fine|ultra meshes the bodies at that display quality
- 1404bc1f5 jyviko: STEP import: a spline face's edges are measured on their pcurves only, not by nearest point first

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 20:45:43 -04:00
jyvikoandClaude Opus 5.5 57921d7fcd Wave 280/509: STEP import: spindle and horn tori, and a negative major radius (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- dfcdefa92 jyviko: STEP import: a loop jumps at a pole to within the tolerance, as its pcurves closed it
- 7ba82d729 jyviko: STEP import: spindle and horn tori, and a negative major radius
- 3a7b51f72 jyviko: STEP import: an edge's distance from an analytic face is measured before its closed-form pcurve
- fcb162448 jyviko: brep: the geometry check reads a pcurve at its edge's parameter within the interval's rounding

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 16:27:16 -04:00
jyvikoandClaude Opus 5.5 40f16c36bb Wave 279/509: STEP import: an edge off its face's surface carries its gap as its tolerance (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 07cb8c7cc jyviko: STEP import: an edge off its face's surface carries its gap as its tolerance
- 21c64fb24 jyviko: tess: an edge loop of fewer than three segments is split until it encloses an area
- 9da3174bb jyviko: solidcraft-smlib: a revolution goes to SMLib as its NURBS form alone
- 31b9410f5 jyviko: solidcraft-smlib: a horn torus to rounding is no ring torus

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 16:45:52 -04:00
jyvikoandClaude Opus 5.5 335278e3c7 Wave 266/509: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 10ea00e74 jyviko: Profiler: every SMLib C API call is a span, timed by the C API itself
- 319c0bc9f jyviko: Profiler: kernel operations and STEP/IGES import stages are spans
- 9cd655259 jyviko: Profiler: commands, feature evaluation, io; diagnostics.profile; CLI --profile
- fafd977b0 jyviko: Profiler: the Profile operations preference switches recording at run time

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 08:22:36 -04:00
jyvikoandClaude Opus 5.5 c025baddd4 Wave 263/509: Smooth edges: one G1 rule on exact surfaces and pcurves (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 57d48aa9f jyviko: Clippy: the kernel's and engine's warnings on develop
- b52a01e29 jyviko: Attribution: the hand-written box STL of kernel case 4561
- 15caa50d2 jyviko: CI affected crates: no truck crates are vendored any more
- c95580d04 jyviko: Smooth edges: one G1 rule on exact surfaces and pcurves

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-27 01:15:08 -04:00
jyvikoandClaude Opus 5.5 5a4e482e9c Wave 260/509: Formatting: rustfmt over the rebased branch (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 562a5bd33 jyviko: Formatting: rustfmt over the rebased branch
- bc15221fa jyviko: The desktop app links SMLib by default
- e476aba94 jyviko: SMLib in the browser: built with wasi-sdk for wasm32-unknown-unknown
- e1ad6ec1a jyviko: SMLib links prebuilt: one build per commit, pinned by SHA-256

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-26 22:57:25 -04:00
jyvikoandClaude Opus 5.5 d6dacbd6d8 Wave 258/509: Cargo.lock: resolved for the merged manifests (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 3e9c70e26 jyviko: Cargo.lock: resolved for the merged manifests
- 6e15b9676 jyviko: engine, kernel-cases: tangent joins out of the corner-pick count; 3383 and 5024 recipes to main's rules
- 46294c7c2 jyviko: kernel: STEP placements by a transformation operator keep its axes and scales
- 3d0f6aa3f jyviko: kernel: IGES trim pieces closed onto their meeting points in main's assembly reader

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-26 13:52:59 -04:00
jyvikoandClaude Opus 5.5 c7ead5658d Wave 228/509: kernel: how a body's material regions meet, read from the record (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 42e50a87c jyviko: smooth edges: tangent joins of planes, cylinders and cones, along straight splines too
- 89e23d1eb jyviko: record: a body built from a sketch has new edges, with no origins
- 8eb93ff06 jyviko: step_in tests: the cube fixture's edges lie on their lines
- 4b418c0d2 jyviko: kernel: how a body's material regions meet, read from the record

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 09:02:24 -04:00
jyvikoandClaude Opus 5.5 06c2c6087b Wave 224/509: STEP and IGES import: SMLib makes the pcurves that have no closed form (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 306c7b75b jyviko: pcurve: a rim at a steady pace on a spline face, read from the edge itself
- 28e0eea80 jyviko: pcurve: each use's closed form or none, and a kernel's trims for the rest
- 1bf206259 jyviko: STEP and IGES import: SMLib makes the pcurves that have no closed form
- 879958721 jyviko: pcurves: a flat patch's are a plane's; SMLib's sheet loops read either way round

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-23 22:22:32 -04:00
jyvikoandClaude Opus 5.5 542715de62 Wave 203/509: kernel: a tapered extrusion closes its corners by a rule, preserving curvature by default
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 384c5866f jyviko: kernel: a tapered extrusion closes its corners by a rule, preserving curvature by default

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 09:11:24 -04:00
jyvikoandClaude Opus 5.5 f6dd5c8c2e Wave 188/509: kernel: IGES export from the record (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 7d9eb68e4 jyviko: solidcraft-step: a record's layout (solids, voids, sheets) and outer loops for every writer
- ed43871f7 jyviko: kernel: IGES export from the record
- 1d4811201 jyviko: kernel: STEP import tests and docs without the deleted face splitting

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:38:43 -04:00
jyvikoandClaude Opus 5.5 3696bf259e Wave 187/509: kernel: STEP import and export on the schema 4 record and SMLib
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- ab8bc6625 jyviko: kernel: STEP import and export on the schema 4 record and SMLib

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 07:34:27 -04:00
jyvikoandClaude Opus 5.5 0bd4531c7c Wave 110/509: WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 42997a62e jyviko: WIP kernel: Body::mesh(&MeshTolerance) as the one mesher (does not build yet)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-22 00:18:36 -04:00
Brennen HerbruckandClaude Opus 5.5 a90020efb4 Wave 97/509: solidcraft-step: faces around a spline closed on itself get a seam
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- a89c67adf Brennen Herbruck: solidcraft-step: faces around a spline closed on itself get a seam

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 12:35:19 -04:00
Brennen HerbruckandClaude Opus 5.5 84aa2c5b1b Wave 94/509: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 8fde178fe Brennen Herbruck: kernel: any schema 4 record into SMLib with its order, healed where refused
- 5014c4f17 Brennen Herbruck: kernel: with SOLIDCRAFT_KERNEL=smlib, STEP solids are SMLib's bodies
- 8ad09ec64 bherbruck: smlib export: a face's loop crosses its poles where the face's parameter box says
- f4da25243 bherbruck: solidcraft-smlib: the fork at bf7c272, whose operation results hold their own gaps

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 11:44:05 -04:00
539f52cc0a Wave 27/509: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib (and 2 more)
3 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 5b8d89abd Brennen Herbruck: kernel: schema 4 STEP records of revolved and conic-bounded parts against closed-form volumes
- c35fd77f6 jyviko: solidcraft-smlib: rebuild SMLib when its own sources change
- 734883bdb jyviko: solidcraft-smlib: booleans, fillet, chamfer and shell through SMLib

Co-authored-by: Brennen Herbruck <brennen.herbruck@gmail.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 01:36:36 -04:00
39118d67a9 Wave 25/509: solidcraft-step: refuse loops across a closed spline surface's seam; conformance parts and truck volumes (and 1 more)
2 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 91e482fc8 Brennen Herbruck: solidcraft-step: refuse loops across a closed spline surface's seam; conformance parts and truck volumes
- 8f31c088f jyviko: brep: a budget of 4,000,000 items, pcurves included

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 01:55:38 -04:00
Brennen HerbruckandClaude Opus 5.5 f63a15bc68 Wave 24/509: solidcraft-step: seams for STEP faces that wind around their surface, looser pcurve fits
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- 3d7e465b1 Brennen Herbruck: solidcraft-step: seams for STEP faces that wind around their surface, looser pcurve fits

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 01:40:05 -04:00
bherbruckandClaude Opus 5.5 517471d0d3 Wave 22/509: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader (and 3 more)
4 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- e0bad4161 bherbruck: solidcraft-smlib: check test on every primitive
- 7050e9cfc bherbruck: solidcraft-smlib: mass properties of every primitive against closed forms
- 4983b8872 Brennen Herbruck: kernel: the boolean runner builds every SMLib operand
- acff340a0 Brennen Herbruck: solidcraft-step: representation context units and uncertainty, shared with the kernel's STEP reader

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-21 01:23:02 -04:00
Brennen HerbruckandClaude Opus 5.5 7f7358f918 Wave 13/509: STEP geometry as plain data: read and write ISO 10303-42 curves and surfaces without truck
1 commits, squashed; the originals stay reachable from tag archive/merge-main-develop.

- f06581ca5 Brennen Herbruck: STEP geometry as plain data: read and write ISO 10303-42 curves and surfaces without truck

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
2026-10-20 22:21:19 -04:00
wckdboyandClaude Opus 5.5 743accca7a Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031) (#5409)
* claim: #4031

* Triangulation: split a crossing boundary segment ourselves, never in spade's assert (#4031)

A trimmed face's boundary segment that crosses a constraint already in the
triangulation went to spade's add_constraint_and_split, which asserts
(cdt.rs:978, `!previous_region.is_empty() || from == final_vertex`) when a
split lands so near another vertex or constraint that the piece up to it is
blocked. The kernel guard caught it, but the whole operation failed and a
crash report was written; a STEP body imported empty or not at all (#4598,
also #4293, #4478, #5068, #5229).

PolyBoundary::add_constraints now adds every segment that can be added, then
splits each blocked one itself: a vertex at each crossing, inserted from the
crossed edge's own vertex, and the pieces between added where they can be. A
segment with crowded or very many crossings, or a face with more than four
blocked segments (a rim that runs back and forth across itself), leaves them
out, as truck did before #1653, so the face meshes slightly off instead of
not at all. Pinched faces (#1648) still split where they cross.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-25 02:55:24 +00:00
edf57cec29 Stand up Y-up STEP and IGES files from SolidWorks automatically (#5191)
* claim: #5150

* Stand it up: don't offer it for SolidCraft's own STEP files (#5150)

STEP replies from file.insert_step and doc.open now carry the file's
originating system, and the window skips the stand-up offer when it is
exactly SolidCraft, as SolidCraft's STEP export writes it.

* Stand up Y-up STEP and IGES files from SolidWorks automatically

The STEP header (originating system, preprocessor version, FILE_DESCRIPTION) and the IGES
global section's native system ID say which program wrote a file. A SolidWorks header means
Y up: the import's component is stood up as it opens, as one undo step, and the message offers
Undo. SolidCraft's own files are left alone; an unknown exporter keeps the offer.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Ray <raykholo@users.noreply.github.com>
Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-23 02:53:20 +00:00
93a2922c5e Display plans and the model cache for large STEP assemblies (#2814) (#4021)
* STEP import: mesh band faces that wrap around a closed surface correctly

Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping
all the way around a closed, non-periodic surface (a revolved ridge band, or a
tube-shaped B-spline surface): a missing face, a folded/self-overlapping
triangulation, or a hole in the rendered body.

1. Ring edges that run slightly off their surface. STEP files write a surface
   and the curves bounding it to the file's own declared uncertainty, so a
   ring edge can legitimately sit a few micrometres off the surface it
   bounds. The code finding where a ring edge crosses the planned split line
   compared against the edge's raw (off-surface) point using a hardcoded
   tolerance far stricter than the file's own precision, rejecting a valid
   cut. Now matches against the point on the surface directly below the ring
   crossing, respecting the file's declared tolerance.

2. Closed B-spline surfaces, their slits and their slivers. truck only treats
   the rotation of a revolved surface as periodic; a face on a B-spline
   surface whose control net closes on itself (a tube) wasn't recognized as
   wrapping around at all. This produced a folded face, a hole (a boundary
   loop landing a full period away from where it should cut), and one
   near-zero-width sliver face costing the entire body its tessellation
   plan. Adds periodicity detection for closed B-spline surfaces, period-
   aware hole-loop alignment, dropping of zero-width slit boundaries, and
   isolating a too-thin-to-triangulate face so it no longer takes the rest
   of the body down with it. The GPU shader's periodic wrap mirrors the CPU
   math so the two don't drift apart.

Regression tests: band_faces_split_when_ring_edges_run_off_their_surface,
band_face_with_a_zero_width_slit_is_still_meshed,
a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan.
Ablation-tested: disabling either mechanism in (2) reproduces its target
test's original failure message while leaving the other test unaffected.

* STEP import: mesh the band's split faces, not just split them

jyviko asked whether a band wall missing from the interactive app's render
was a shading issue or a genuinely missing face. It was missing: the ring-
edge split fix made the band's topology correct, but plan_face still
produced zero triangles for the two new sub-faces.

Two causes, both in plan_face (crates/kernel/src/tess/mod.rs):

1. The tolerance for how far an imported boundary may lie off its surface
   was tied to the requested mesh's chord tolerance instead of to the
   body's own size. A finer display tolerance could then reject a boundary
   a coarser one had just accepted, so the face would drop out exactly when
   zooming in on it.

2. Near a sharp corner of this flat-panelled band, several boundary points
   that are legitimately a few micrometres apart (within the STEP file's
   own declared precision) all projected onto the same surface point. The
   boundary loop then repeated a point in (u, v), which a triangulator
   can't follow, so the face's plan failed outright. One face without a
   plan costs the whole body its plan, and the fallback mesher can't
   handle a closed B-spline surface either, leaving both halves of the
   split band with no triangles at all: present in the topology, invisible
   in every renderer, and absent from the body's volume.

Fix: scale the off-surface tolerance to the body's own extent (new
Rules::extent), and collapse a run of boundary nodes that land on the same
surface point to one (drop_collapsed) before triangulating.

Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface:
the body's volume now matches the analytic pentagon prism (was a third of
it - only the top cap - before this fix); display_plan leaves no face
without triangles from coarse to fine tolerance; and the actual tolerance
and facet angle the viewport draws with gives the split band its full
lateral area on both halves.

Confirmed on review_band_big.step, the fixture behind the review screenshots:
volume's relative error against the analytic pentagon prism drops from
1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it
in a snapshot the same way the top and bottom caps always did.

Full kernel suite: 739 tests, 0 failed.

* STEP import: hold an imported boundary to the file's own tolerance, not the part's size

jyviko: the off-surface acceptance added in the last commit
(rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part
silently accepted a boundary 2 mm off its surface while a 20 mm copy
of the same part accepted only 0.02 mm. A STEP file's own declared
uncertainty does not grow with the part, so the bound shouldn't either.

Body gains boundary_tol: Option<f64>, Some(file's declared tolerance)
for a body read from STEP (crate::step_in::Units::tol, already used
by the ring-split fix in split.rs), None for anything this kernel
built. It's set before the import's own unmeshed-face check runs, and
carried over by the two face-split operations that re-cut an imported
surface (splitface.rs, outline.rs), since the file's uncertainty still
describes those boundaries afterward.

plan_face's accept now reads: the file's own tolerance when the body
declares one, or the old chord-tolerance/extent bound otherwise. The
old bound's tol * 10.0 term had to go too, not just the extent term:
at a 2 m part's typical display tolerance that term alone is ~20 mm,
nearly ten times the extent bound jyviko objected to, so keeping it
would have left the exact 2 m/2 mm example still silently accepted.

Two new tests in step_in/tests.rs:
- band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same
  band fixture at a realistic 2 m scale with the same absolute slop
  and declared uncertainty as the small one, meshes the same way at
  every chord tolerance from coarse to fine.
- off_surface_budget_follows_the_file_not_the_part_size: the actual
  regression. The same off-surface error is accepted or refused the
  same way whether the part is 20 mm or 2 m; a 2 mm error against a
  1 µm declared uncertainty is refused at both sizes now (accepted at
  2 m under the old bound, refused at 20 mm - that asymmetry was the
  bug). Checked at both a coarse and a fine display tolerance.

Known gap, not fixed here: a STEP-imported body saved into a
.solidcraft design and reopened loses boundary_tol (native.rs's
decoder has no field to read it from) and falls back to the old
extent-based bound on reload. Today's design format has no concept of
this value at all; persisting it is a real format change, out of
scope for this fix.

Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean.

* Display plans for STEP threads and pointed ends (#3847)

Three faces cost a threaded or pointed STEP part its whole display plan, so it
was drawn from the reference mesh: cracked, faceted, and never refined up close.

- A loop through a pole (a cone's apex on the boundary) seemed to wind around
  the surface: the jump at the apex, unwrapped to the nearest copy, was
  arbitrary. The loop is turned to end where it leaves the pole, so the step
  that closes it is an ordinary one (`seam::close_through_pole`).
- Projection onto a spline with hundreds of spans (a helical flank) restarted
  from a 16 x 16 grid and settled on another turn; it now starts from two
  points per span, capped.
- Sag refinement no longer inserts a point exactly on a boundary side, which
  split the side and failed the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* tess: a refused face's edges are divided finer and it is planned again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814)

A face whose boundary runs out and back along itself (two edges between the
same vertices, a rounding apart, as STEP files write slivers) encloses nothing
and is planned with no triangles. A face still refused after its edges are
divided finer (a cusp, a sliver whose sides sag across each other, a small cap
at a pole) is filled flat from its shared boundary nodes, so the rest of the
body keeps its display plan instead of falling back to the reference mesh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* portable B-rep: up to 8192 control points along a spline direction (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* solidcraft-cli: --debug logs what the engine reports to stderr

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: a spline written over a tiny parameter range is read over one (#2814)

Some writers parameterize splines over a few millionths (a humanoid robot's
edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over
such a range it evaluated the curve's end wrongly, and trimming an edge to its
vertices dropped a control point: the bodies could not be stored exactly and
the whole model cache was left out of the design. The knots are now stretched
to span one; the curve is the same and edges are trimmed by their vertices, so
nothing read from the file refers to the old parameters.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* model cache: a body keeps its file's declared accuracy (#2814)

A body restored from the cache dropped the accuracy the file it was read from
declares, so the planner held its boundaries to the kernel's own bound and a
reopened design drew differently from the import. It is stored with the body's
runtime values, and only when there is one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814)

#1721 held a body read from a file to the accuracy the file declares. A writer
declares what it aims for, not a bound its edges keep: a 251-body robot
assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and
95 of its bodies lost their display plans. The bound is a hundredth of the
body again, what Normal quality always allowed, and now the same at every
quality, so zooming in still never drops a face (#1721's point). A file
declaring more raises it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: keep faces whose edge vertices sit slightly off their curves

Some exporters write an edge's vertex beside the end of its curve, further off
than the accuracy the file declares (a surface export declares
0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused
such edges and left the face, and with single-face bodies the body, out.

A vertex may now sit up to the file's tolerance or 1/1000 of the model's size
(the diagonal around its VERTEX_POINTs), whichever is larger, never more than
the existing 1 mm ceiling. Spline and open-conic edges have the end control
point moved onto the vertex, so every such edge meets its vertices exactly.
The file's declared accuracy still governs closed-curve, seam and circle
checks.

* tess, io: review clean-ups (#2814)

- A sliver face is one whose loops are all slit: drop_slits finds it in the
  retry after a failed plan, so the pre-check on every face (folded) is gone.
- The flat fill uses cdt::triangulate (a lenient fill that leaves out sides
  crossing one already kept) and its flood-fill inside test, and the plane
  from geom::Plane.
- Refinement only builds its indexes when a face was refused, takes the
  faces to plan again from edge_faces, and re-samples edges on the pool;
  Rules::finer for the finer rules.
- One PackageWriter::fits for the model cache, the preview and the thumbnail.
- The band split's ring tolerance lives in split.rs; comments say what the
  off-surface bound is now.
- The CLI logger prints Level::as_str().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Ray <raykholo@users.noreply.github.com>
2026-10-21 10:37:12 +00:00
Luke JonesandCodex 26c0c19ef7 Preserve imported part names and IGES assembly structure (#1609)
Build on #1426's import components and nested STEP assembly instances.
Replace placeholder solid labels with meaningful part or instance names.
Translate IGES groups and subfigure instances through the existing STEP
component path, preserving nesting and placements and sewing surfaces
within each group. Bound assembly walks and reuse work buffers.

Related to:
- tangency-labs/solidcraft#1386
- tangency-labs/solidcraft#1426

Co-authored-by: Codex <noreply@openai.com>
2026-10-21 00:39:08 +00:00
bherbruckandClaude Opus 5.5 438abbcf82 STEP conformance sweep: the cones to a point read right now (#258) (#3901)
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:03:46 +00:00
bherbruckandClaude Opus 5.5 94bd8719aa STEP import: a void reads as a cavity whichever way its shell flag points (#3730) (#3872)
A BREP_WITH_VOIDS void's faces face into the cavity, so it encloses volume of
the opposite sign to the outer shell. Its ORIENTED_CLOSED_SHELL flag alone
doesn't tell: SOLIDWORKS writes .F. over a shell already facing into the
cavity, SolidCraft .T., and flipping by the flag added the cavity's volume. A
void enclosing volume of the outer shell's sign is now turned inside out.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:54:54 +00:00
bherbruckandClaude Opus 5.5 fc3dedfd5c STEP import: regression sweep over the step-conformance parts of known shape (#3880)
* STEP import: regression sweep over the step-conformance parts of known shape

Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:07:47 +00:00
bherbruckandClaude Opus 5.5 5638259737 STEP import: a cone bounded only by its base circle reaches its point (#258) (#3871)
A cone face written with no vertex at its point has the base circle as its only
loop (or that circle and a VERTEX_LOOP at the point, which has no edges). Its
surface was spanned over the circle alone, a sliver, so a solid cone came in as
a flat disc. Such a face is now spanned to the apex, and its circle is joined to
the apex by a seam line out and back, as a cone with a seam is written.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:35:12 +00:00
AlF c83446c6c9 Fix issue 3120, import of STEP file not correct (#3208) 2026-10-20 11:07:50 +00:00
bherbruckandClaude Opus 5.5 f6cf8ceaad perf: an instanced STEP part's first instance shares its display mesh (#2814) (#3047)
Later instances of a part showed a mesh shared through the first instance,
but the first instance meshed its own, so every repeated part was meshed
twice. The first instance of a part placed more than once now shows the
shared mesh too; a part placed once keeps its own (no second copy).

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:01:50 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
Rifqi Al Fatihandbherbruck 46a0b25280 STEP import: CJK names read back whole (#2344) (#2347)
Adjacent \X2\...\X0\ runs, as step_out writes one per character, now
decode: the backslash opening the next run was pushed as a literal, so a
name exported as 圆角 came back as 圆\X2\89D2\X0\ (also every linked
component insert, which round-trips through STEP).

STEP and IGES bytes that are not UTF-8 are decoded in their detected
legacy encoding (chardetng + encoding_rs) instead of from_utf8_lossy, so
GBK or Shift_JIS names from vendor files no longer turn into U+FFFD.

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 02:32:50 +00:00
bherbruckandClaude Opus 5.5 adaac4d1b6 perf: STEP import reads and orients distinct parts in parallel (#2814) (#3046)
Converting an assembly went one occurrence at a time: a part's solid was read
from the file and oriented on the calling thread, and only runs of four or
more solids in one representation used the workers. Each step now takes the
next solids across occurrences and parts (up to 64, stopping where a part not
yet oriented comes back), and the workers read and orient the new parts side
by side, each taking the next one when it is done. Later instances still only
place the part their first instance oriented.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 00:26:36 +00:00
NOWN-DEV 53a9260aeb Interference: near-coaxial pins after a STEP round trip, with flush heads, in either order (#1984)
Interference: near-coaxial pins after a STEP round trip, with flush heads, in either order.
2026-10-19 17:22:56 -04:00
bherbruck 5997d28de7 STEP import: orient each instanced part once (#2814) (#2875)
Thanks @bherbruck.
2026-10-19 04:07:39 -04:00
bherbruckandClaude Sonnet 5.5 9eb1540a34 Docs: describe SolidCraft as independent CAD (#2768)
Reword comments, docs and package descriptions so they describe SolidCraft's own behaviour instead of comparing it to another product. The trademark notice, the commercial-CAD rule and the navigation preset name stay as they were.

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-18 21:16:11 -04:00
Moritz 9be8bb5e6b Fix Steam Frame STEP trims and spline projection (#1974) (#2043)
Thanks @moritzuehling.
2026-10-17 13:33:17 -04:00
franco michetti fbc00bb2c4 STEP import: a ball bounded only by its seam comes in whole (#1742)
Thanks @onembyte.
2026-10-17 06:46:47 -04:00
NOWN-DEV 172782705a fix: STEP import reads unclamped (periodic) B-splines on the seam (#1916)
Thanks @NOWN-DEV.
2026-10-17 05:30:13 -04:00