Commit Graph
22 Commits
Author SHA1 Message Date
Erlis VidalandClaude Opus 5.5 9e15995a74 A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the
plate's top face) could come out of the general boolean with the target's face whole over the hole
and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume
shows it and the sampled membership checks see the hole either way, so the result was kept. The
result check now refuses a body with a planar face lying back to back on another of its own planar
faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:15:37 +00:00
Peppe Bergqvist 926a7353a3 Sheet metal: possible to create flange on a flange (#3274) 2026-10-20 04:02:20 +00:00
Karl Von Richter 759e22b582 Try exact local cuts after invalid empty numerical results (#1765) (#1858)
Two empty numerical cut attempts stopped the boolean retry sequence before
the exact geometric strategies ran. When the result guard refuses that empty
candidate, the exact strategies (sliced planar, pushed walls, local prism,
sphere lens, seam halves) now try the cut first; if none recovers it, the
original empty candidate and diagnostics are kept, before any displaced
numerical retry.

Rebased onto main as one commit (the branch's own changes, its merges of main
dropped). The only conflict was the new engine regression test next to
main's #1985 STEP export tests in boolean_regression_tests.rs; both are kept.
2026-10-20 03:25:02 +00:00
fkirill 3ffd8efffc Loft: preserve holes through matching sketch sections (#2435) (#2447)
Rebase the complete PR change onto current main, preserving changes previously stored in merge commits.
2026-10-19 23:57:07 +00:00
ee67ed53af STEP export no longer hangs on a box with a screw hole (#1985) (#2243)
* claim: #1985

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* STEP export no longer hangs on a box with a screw hole (#1985)

The export reads its own STEP text back, and meshing the read-back screw
hole never finished. On a seam cylinder the boundary walk projected points
to angles up to 5e7 rad apart and moved each by two turns at most, so the
11-point loop spanned millions of turns and the polyline closing it across
the seam had 4.3 million points. Each projected parameter is now brought to
within half a period of the point before it, whatever the gap.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

* Second #1985 regression: the reporter's flanged enclosure

The issue's reporter delta-debugged a second design whose STEP export hung
on main: a flanged enclosure with two standoffs and no screw hole. It hangs
without the get_mindiff change and reads back with 29 faces and the same
volume with it. Both tests share the read-back checks.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01L15TLCjpXsQdp8ovC4ZacH

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 19:14:01 -04:00
fkirill 54b00fa7b1 Chamfer straight lips at tangent wall junctions (#2408) (#2490)
Thanks @fkirill.
2026-10-19 18:04:24 -04:00
28d67fb577 Regression tests: a cut short of a face keeps its skin, and the issue's pleats mirror and build at the far end (#1669) (#1730)
* Extrude: a profile edge short of a face is not grown through the skin beyond it (#1669)

A cut or join profile edge that lies on a face of the target is grown off it by 0.5 % of the body, so that the tool's wall does not lie in the face. Whether it lies on a face was judged half a growth step either side of it: empty just outside, material just inside. An edge 0.25 mm short of a 3.75 mm wall's far face reads the same, and the growth cut through the skin it should leave (55 050 mm³ instead of 56 130 on the test's wall). Now the space just past the edge, 1e-4 of the body out, must already be as the operation wants too.

In #1669, the pleat's window built directly at the far end of a case opened through the wall at 3.75 and 4 mm, while its mirror, built without the growth, rightly left the skin and then failed to join the loft through it. Built either way, the window now leaves the skin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Regression tests: the issue's pleats mirror and build at the far end (#1669)

The issue's battery case at 3.5 mm: the mirror of the window and the pleat builds (it needed #1670's meshing of twisted faces), and at 3 mm the same window and pleat built directly at the far end of the finished case join it (they needed #1667's end rounds).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Far-end pleat test: the direct build matches the mirror's volume

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Erikas <erkexzcx@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:13:26 -04:00
fkirill f480898158 Extrude: join extensions of ribs on curved bases (#2059) (#2082)
Thanks @fkirill.
2026-10-17 13:33:21 -04:00
fkirill 2c924fd385 Sweep: close circular tools before cutting a torus (#2005) (#2010)
Thanks @fkirill.
2026-10-17 12:46:21 -04:00
NOWN-DEV 40abcbc8cf Booleans: prism cuts whose walls only touch the target are exact (#1894)
Thanks @NOWN-DEV.
2026-10-17 08:00:06 -04:00
Irakli Kourtis f57a62deb7 Intersection edge nodes advance along the curve at fine display qualities (#1615)
Thanks @jyviko.
2026-10-16 03:00:56 -04:00
bherbruck 762b6fe934 Extrude Cut of a whole face beside round corners: grow the arcs too (#1275) (#1401) 2026-10-15 10:27:22 -04:00
Que 1cc65cbc91 fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)
fix: a lip swept flush around a rounded rim joins the body it sits on.
2026-10-14 18:49:45 -04:00
selune 293d660d6c fix(kernel): preserve intentional Split Face lines in contact joins (#782)
Intentional Split Face lines survive a join with partial planar contact, so the far face stays in two pieces. Follow-up to #704 / #674.
2026-10-13 12:46:34 -04:00
bherbruckandClaude Opus 5.5 29258767ce fix: refuse Boolean retries that change the part away from the tool (#616) (#644)
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 07:10:29 -04:00
bherbruckandjonaswre 1abd989a67 test: land the remaining ignored regression tests from #548-#573 (#582)
Ignored regression tests for #530, #531, #541, #542, #545, #547 and #570, from #548, #549, #550, #552, #555, #573 and #572.

Co-authored-by: jonaswre <jonas.wrede@beyondit.gmbh>
2026-10-13 02:51:12 -04:00
Jonas Wrede 7a8754bef7 test: failing regression test for #544 (ignored until fixed): Blind Ø2 hole into a long D-profile bar is refused ("exact fallback … takes planar faces only") although it stays clear of the round face (#551)
Adds an ignored regression test for #544; it runs once #544 is fixed.
2026-10-13 02:28:12 -04:00
f525704192 test: failing regression test for #268: Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall (#283)
* test: reproduce #268 (Panic from truck-topology lib.rs:186 when joining struts that end on a bore wall)

* Sew refuses edges whose ends weld to one vertex (#268)

The sewer welds vertices on a 1e-6 grid but only rejected edges shorter than
1e-9, so a sliver edge between the two welded its ends into one vertex and
truck-topology panicked ("Two same vertices cannot construct an edge") inside
the guard. Such an edge is now a degenerate-edge error before any truck call,
and the boolean takes its usual fallback.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 11:18:24 -04:00
CypherNaugh_0xandClaude Opus 5.5 3086c32a9a A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked
The loft's top lies in the pocket floor. truck's boolean cannot take coincident faces, and the exact polygon fallback (planar_boolean) only takes bodies whose faces are all planar, so the hole's cylinder ruled out the only path that handles this cut. planar_boolean now first tries a sliced form: when an axis-aligned slab holds the tool and none of the body's curved faces, the body is split on the slab's planes (planes clear of the body's own faces), the planar middle piece takes the exact boolean, and the pieces outside are glued back on along the cut faces (the middle piece is healed first so its edges match theirs). Pieces in several parts are refused rather than glued into one shell. split_by_plane's half-space code is now ops::half_space, which this uses.

Tests: loft_cut_beside_a_round_hole replays examples/regressions/loft_cut_beside_round_hole.json and checks the exact volume (slab - pocket - prismatoid - hole; fails on main). With the hole made after the loft, the body is the same (volume, area, 19 faces, 42 edges).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 5249ae84ef Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back
Moving a body transforms its intersection-curve edges, and truck-geometry 0.5.0 scales each curve's tolerance by the operator norm of the matrix. matext4cgmath 0.1.0 computes it from eigenvalues through a quartic whose Newton refinement loops while the residual is above a tolerance and never gives up. For a translation matrix all four eigenvalues are 1, and near that quadruple root the iteration can cycle forever (about one translation in eight of the boolean retries' shifts, by a scan of sizes 0.1-2000 mm). matext4cgmath is vendored with both Newton loops stopped after 100 steps (vendor/README.md, ATTRIBUTION.md).

truck master no longer computes the norm in transform_by, so the vendored copy can go once a truck release after 0.5.0 is adopted.

Tests: moving_a_body_with_an_intersection_curve_edge_ends (kernel) cuts a cylinder with a tilted box and moves the result by one of the shifts that hung (hangs on main). examples/regressions/oblique_cut_of_cylinder_hang.json is the variant of the oblique cut that hung the app; it hangs on main, and since the previous commit it passes without reaching the shifted retries, so it is replayed by the engine test as a scenario only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 f3a689f284 A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)
The boolean checks its result by meshing both operands and the result, then sampling membership densely where the operands' boxes overlap. The mesh step came from the larger body's size (0.46 mm here), which facets the bar's 3 mm arc so coarsely that two meshes of the same arc disagree over a few percent of the thin overlap box, and a correct cut failed the 0.4 % mismatch limit. The step now also follows the smallest side of the overlap box (2e-3 of it), never finer than 1e-5 of the size, so it only changes where the bodies meet in a region much thinner than they are. truck's first result for the cut is then accepted, and it matches a split of the bar by the tilted plane.

Tests: oblique_cut_through_a_small_arc_matches_a_split replays examples/regressions/oblique_cut_of_cylinder.json and compares with solid.split_body by the same plane (fails on main). The full suite runs no slower.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00
CypherNaugh_0xandClaude Opus 5.5 f17ff913d6 A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"
heal_keep evaluated the result's intersection curves outside any guard. truck panics where such a curve no longer evaluates, and the panic escaped boolean_whole, so the retries and fallbacks that would have succeeded never ran. heal_keep now runs under guard and returns the solid unhealed when healing panics (as its doc already promised for failures), and the boolean builds its result body under guard too, so a result that cannot be built counts as a failed attempt.

Tests: shallow_loft_cut_from_the_top_face replays examples/regressions/shallow_loft_cut_from_top_face.json and checks the exact prismatoid volume (fails on main with the panic).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-10 17:57:34 -04:00