Commit Graph
1475 Commits
Author SHA1 Message Date
bherbruckandClaude Opus 5.5 d2188fb7ab IGES import: a B-spline curve over a tiny knot span keeps its faces (#3885) (#3886)
A curve written over a knot span of 1e-7 or less was refused on the STEP side
("knot vector consists single value"), and both faces it bounds were lost. Its
knots are moved and scaled onto (0, 1), which leaves its shape as it is.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:13:28 +00:00
bherbruckandClaude Opus 5.5 438abbcf82 STEP conformance sweep: the cones to a point read right now (#258) (#3901)
cone_point and cone_point_vertex join the sweep now that #3871 reads a cone
bounded only by its base circle up to its point.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:03:46 +00:00
Christian SvenssonandClaude Opus 5.5 079a600481 Recovery: autosave every open design tab (#2884) (#2952)
* Fix recovery for unsaved background tabs (#2884)

* Recovery: scheduled autosaves of every tab write on the worker thread (#2884)

After #3139, Autosaver::save waits for the write and Autosaver::tick runs
it on a worker. The scheduled path now goes through tick (which skips a
tab whose previous write is still running), so several dirty tabs no
longer write on the window thread each interval (#3044). save stays for
Save, close and shutdown. Each tab's autosaver has no clock of its own:
the shared cadence decides when it is due. The tests wait for the
writes a tick started.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Recovery: closing a tab waits for its running autosave before removing the entry (#2884)

With the autosave on a worker thread, discard could remove the files and
the lock while a write was still running; the write then recreated the
entry without a lock, and the next launch offered a design closed with
Don't Save. discard now ends the running write first, as Drop does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:58:05 +00:00
bherbruckandClaude Opus 5.5 94bd8719aa STEP import: a void reads as a cavity whichever way its shell flag points (#3730) (#3872)
A BREP_WITH_VOIDS void's faces face into the cavity, so it encloses volume of
the opposite sign to the outer shell. Its ORIENTED_CLOSED_SHELL flag alone
doesn't tell: SOLIDWORKS writes .F. over a shell already facing into the
cavity, SolidCraft .T., and flipping by the flag added the cavity's volume. A
void enclosing volume of the outer shell's sign is now turned inside out.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:54:54 +00:00
bherbruckandClaude Opus 5.5 fc3dedfd5c STEP import: regression sweep over the step-conformance parts of known shape (#3880)
* STEP import: regression sweep over the step-conformance parts of known shape

Fifteen generated parts from step-conformance (CC0): plain, NURBS, seamed,
placed, inch and far-away cylinders, domes, a grooved shaft, a plate with 100
holes, a 3.6 m disc, a 0.5 mm pin, a B-spline half-torus and a washer. Each
reads back with its exact volume, its box and its face count. The half-torus
on a TOROIDAL_SURFACE and the cones to a point are left out until they read
right.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* STEP conformance sweep: the pin's volume as FRAC_PI_8 (clippy)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 23:07:47 +00:00
bherbruck 41a62d210c File menu: Export STL… and Export 3MF… open the mesh dialog with that format; command search finds mesh export by format (#3873) 2026-10-20 22:43:30 +00:00
bherbruckandClaude Opus 5.5 5638259737 STEP import: a cone bounded only by its base circle reaches its point (#258) (#3871)
A cone face written with no vertex at its point has the base circle as its only
loop (or that circle and a VERTEX_LOOP at the point, which has no edges). Its
surface was spanned over the circle alone, a sliver, so a solid cone came in as
a flat disc. Such a face is now spanned to the apex, and its circle is joined to
the apex by a seam line out and back, as a cone with a seam is written.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 22:35:12 +00:00
NOWN-DEVandClaude Opus 5.5 090119a5c5 Boolean: a small hole in a large body's face stays a hole when the face is divided (#2579) (#2580)
* Boolean: a small hole in a large body's face stays a hole when the face is divided

A boolean divides faces at a tolerance that follows the larger operand (a few
millimetres on a part a few metres long). A small hole's rim, two half circles
when read from STEP, then became two chords: its polygon in the face's
parameters had no area, and the sign that tells a hole from a face piece came
out at random. The hole became a face of its own, inside out, and the face it
was cut in stayed whole. A box cut round such a hole gave a piece without it,
and the shared part of that piece and a pin in the hole came out negative
("malformed") or the boolean failed.

divide_face now divides a loop whose polygon is flat again, finer (down to a
hundredth of the loop's own size), before reading its sign. Only the polygon
that places the loop changes; loops that have an area are untouched.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Kernel: the long-plate hole test in tests.rs; a flat loop's size from its box

Review: the test moves into the kernel's test file (no file of its own),
and finer_if_flat takes the loop's size from the diagonal of the box round
its sample points instead of the largest distance between any two.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-10-20 21:56:33 +00:00
raykholo 5ba8c815a6 IGES import: trim curves with reversed pieces no longer drop their faces (#3358) (#3359)
* claim: #3358

* IGES import: trim curves with reversed pieces no longer drop their faces

A curve on a surface (142) gives each trim loop twice: B in the surface's
parameter space and C in model space, running the same way. Some exporters
write C as a composite curve (102) whose pieces are in order but some of
them end to start. The reader passed those pieces on as they were, so the
loop did not close and the STEP reader left the face out ("face boundary is
not a closed loop").

The pieces of C are now turned to run head to tail, starting at S(B(start)),
the point where the parameter-space curve begins on the surface. That keeps
the loop's sense from the file, so holes still run against the outer loop.
A piece whose ends are one vertex at the sewing tolerance keeps its
direction.

On a 9,276-face trimmed-surface car model, 7,887 faces now import instead
of 3,882.
2026-10-20 17:32:48 -04:00
bherbruck cb1b230732 Add Dutch, Swedish, Traditional Chinese, Indonesian, Romanian and Hungarian (#3826)
The new catalogs are machine translated; native speakers, corrections are very welcome.
2026-10-20 17:32:44 -04:00
bherbruck 6e22e3709d Web: reopen designs saved on the computer from the recent list after a reload; forget stale remembered files (#104) (#3834) 2026-10-20 17:32:36 -04:00
Krzysztof HeimandKrzysztof Heim 1b84ce6330 fix: skip impossible drags of determined sketch geometry (#2006) (#2199)
Co-authored-by: Krzysztof Heim <krzysztof.heim@b4bridge.com>
2026-10-20 20:56:50 +00:00
bherbruck 687caad24c IGES import: a revolved arc is a cap, not a whole sphere (#3806) (#3813)
A surface of revolution (120) wrote its arc generatrix as a whole STEP circle, which
turns into a whole sphere twice over when the arc is centred on the axis; the trim could
not pick the cap out of it and the face meshed as the full ball. An arc in a plane through
the axis now comes in as a sphere or torus, any other arc as an exact rational B-spline of
just the arc.
2026-10-20 20:56:35 +00:00
bherbruckandClaude Opus 5.5 7e05c8b23c Hovering a long helical edge no longer freezes (#3745) (#3818)
Hovering an edge lights its circular rim, which starts from the edge's
tangent chain. That looked at every edge of the mesh for each edge in the
chain (and searched the chain itself each time), so a long helical edge in
many pieces, a thread's crest, took seconds: 7.6 s inside the frame on the
first hover of the stem's thread in a real watch-movement STEP file. The
edges are now found by the grid cells of their ends, two join tolerances
across, so each step looks only at the edges that end near it: the same chain
in the same order, in 29 ms for that thread.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 17:08:50 -04:00
7dfbaf2a2c Parameter autocomplete matches anywhere in the name, prefix matches first (#2757) (#2849)
* claim: #2757

* fix(params): autocomplete offers a parameter for any part of its name (#2757)

Typing `side` now offers `cab_side_thickness`: parameters match the word
anywhere in their name, after those that start with it, both in the expression
boxes and in parameters.complete. Functions, constants and units still match
from the start.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 20:39:14 +00:00
1e0e8f78dc Shift+R repeats the last tool or dialog (#3045) (#3160)
* claim: #3045

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Shift+R repeats the last tool or dialog (#3045)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 20:29:22 +00:00
bherbruckandClaude Opus 5.5 754eb56e5b perf: hovering a large body never waits for its pick index or plan mesh (#3745) (#3766)
The first hover over a large body made two things in the frame: the body's
pick index (its triangles and edges in hierarchies; about 0.3 s for a long
modelled thread, a quarter of a million triangles) and, with the GPU viewport,
the plan mesh a highlighted face is drawn from (about 0.7 s for the same
thread). The window froze for the sum.

A large mesh's pick index is now made on a worker, and picks scan the mesh
until it is there (a few milliseconds); a body's plan mesh is made on a worker
too (`ModelBody::plan_mesh_soon`), and until it is there the hovered face is
lit on the mesh the viewport already has. Small meshes, and the browser build,
make both at once as before.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:28:11 -04:00
Nathan Dane c78095ccde Fix UI stack integration after rebasing on main 2026-10-20 21:50:22 +02:00
Nathan Dane 6decbf407f Command search: concentric corner radii, a wider closed field with tighter spacing 2026-10-20 21:01:32 +02:00
Nathan Dane 6f521991c7 Command search: the closed ribbon field keeps its original size; the I-beam cursor over it 2026-10-20 21:01:32 +02:00
Nathan Dane 6c9ddc2528 Command search: the ribbon field animates into the search field; the footer fills the sheet edge to edge 2026-10-20 21:01:32 +02:00
Nathan Dane 41f5957d60 Icons keep their multi-tone artwork: tone accents for confirm, menu and radial glyphs 2026-10-20 21:01:32 +02:00
Nathan Dane d45fcce72c Command search popup on the UI kit; the bottom command line is gone 2026-10-20 21:01:32 +02:00
Nathan Dane a3e2fe25bb Context menus, radial menu and rename popover on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane 57aad71bbe Window frame with page list and the confirm dialog on the UI kit 2026-10-20 21:01:25 +02:00
Nathan Dane f2eaead594 Per-tab accent tokens: fill, ink and tint for every tab, with a contrast guard 2026-10-20 21:01:25 +02:00
Nathan Dane a5e0fe3ec4 Parameters, Configuration Table, Crash Reports and Appearance redesign (step 8 of #2016, after the cleanup PR) 2026-10-20 21:01:25 +02:00
Nathan Dane dad56187df Cleanup after the popup move (step 7 of #2016, after the panels PR) 2026-10-20 21:01:18 +02:00
Nathan Dane 7026248e25 Every popup and panel on the UI library (step 6 of #2016, after the library PR) 2026-10-20 21:01:11 +02:00
Nathan Dane 1122cd44b8 UI library, tokens, fonts and icons (step 5 of #2016, after #2287) 2026-10-20 21:00:56 +02:00
Nathan Dane 837dbe66df Compass and viewport overlays (step 4 of #2016, rebased onto step 3) 2026-10-20 21:00:50 +02:00
Nathan Dane 845edeba5f Floating browser card and history strip (step 3 of #2016, rebased onto step 2) 2026-10-20 21:00:50 +02:00
Nathan Dane c2e3bdfe1c Floating shell frame: workspace and ribbon cards over a full-bleed viewport (step 2 of #2016, rebased onto #2176) 2026-10-20 21:00:50 +02:00
Nathan Daneandbherbruck a0c1a67220 Application bar and ribbon redesign (step 1 of #2016) (#2176)
* ui: spacing, radius and type tokens, per-tab accents, agent and on-accent tokens

* ui: per-tab accent behaviour and a larger application bar with a Start page button

* icons: silhouette master and flat assistant and agent link icons (open for review)

* icons: apply review notes (sparkle assistant, refined plug, silhouette halo)

* icons: wire the silhouette master to inspect.silhouette; record the accepted icons

* ui: application bar to the design: separators, Save, house, assistant icon, readable hovers

* ui: ribbon structure: Model to View tabs, contextual Sketch and Sheet Metal, migrated pins

* ui: ribbon painting to the compact design

* ui: smaller icon button highlight and assistant mark on the bubble corner

* ui: short ribbon labels that wrap at spaces

* ui: ribbon buttons fit their labels and Finish Sketch shows its full name

* ui: constraint gallery, workspace menu, section list headings and richer tooltips

* ui: lighter selected tab label, ribbon surface and dimmer bar separators match the dark design

* ui: document tabs as rounded chips with a dimmer inactive label

* ui: document tabs fit their names and show close only when active or hovered

* icons: close and plus masters for the document tabs (open for review)

* ui: centre the new-tab plus and overflow button on the bar

* ui: a quiet rule under the ribbon tabs on non-contextual tabs

* ui: the application bar mark separates its faces with the bar colour, not white

* ui: open ribbon section label uses the selected tint and a chevron

* ui: dim the tab close and plus icons until hovered

* ui: every ribbon dropdown uses the chevron, the workspace card included

* ui: the active document tab uses the design's surface colour

* ui: the bug button's right padding mirrors its icon side

* ui: square constraint cells and a rule before the grid

* ui: constraint cells back to their earlier size, keeping the rule

* ui: smaller constraint cells and icons, centred in the section

* ui: constraint cells fit the height of the large buttons' icon and label

* ui: sketch Create titles share the other labels' line

* ui: format the application bar and ribbon changes

* ui: active tab surface token and the colour and hover tests that follow the redesign

* tests: the merged parameter and narrow toolbar tests follow the compact ribbon

* i18n: the Malay Gap label has an English source and its Japanese and Chinese translations

* apply_off_thread tests: the evaluation lingers in tests, so still computing never depends on machine speed

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 17:23:49 +00:00
bherbruckandClaude Opus 5.5 5d9ebe9911 Renaming a feature no longer rebuilds the design (#3044) (#3097)
* perf: renaming a feature evaluates nothing (#3044)

A feature's name labels it and builds nothing, but a timeline rename evaluated
the whole design again (about 70 s on the Prusa Core One assembly, and again
for undo). When the only change is one feature's name, the model renames its
result, sketch and construction geometry in place and takes the renamed
design's fingerprints. A rename other features follow (a plane a sketch is on)
or of a failed feature still evaluates the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Guard cheap commands on designs with thousands of bodies, plus a scaling bench (#3044) (#3121)

Cheap commands stay cheap on designs with thousands of bodies, with a scaling bench.

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:08:59 -04:00
bherbruck b2168435ba Web: save to and open from files on your computer (#104) (#3681)
Save As and Open use the browser's file dialogs where the File System Access API exists; Save writes back to the same file, its handle kept in IndexedDB across reloads. File > Download design added. Other browsers keep storing designs in OPFS.
2026-10-20 13:39:55 -04:00
SS-ENandClaude Opus 5.5 34afcf75c1 Joints: a loop that meets only to within nanometres still moves (#3475)
A closed loop whose joints meet a few nanometres apart along their parallel
axes (faces modelled that far apart) passes the conflict check, but the loop
solver wanted 1e-7 mm before it moved anything. No value of a planar loop
takes such a gap out, so every drive of it stopped at once (stopped_by_loop,
fraction 0) and joint.reach called the loop open.

The solver now closes such a loop as far as it comes and, when what is left
is within the conflict check, keeps it that closed on the way. joint.drive,
joint.reach and the nearby pose of the dof count share it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:41:37 +00:00
932d8d6b4f Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)
* Tessellation: trimmed faces of display meshes stay on their surfaces

Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Tessellation: one boundary rule for every mesh; drop the #1648 retry

A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Thread preview test: wait for the stale fit error to clear before the next preview

After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:49:45 +00:00
fkirill fb87cde6a1 Sketch: persist Shift-picked midpoints with ordinary constraints (#2087) (#2378) 2026-10-20 16:26:19 +00:00
Victor Santos Oliveira 5305d7c82d Clarify delayed detection in unclean-exit reports (#3640) 2026-10-20 16:05:55 +00:00
Colin Faulkingham 59cd55f531 Sketch: keep three-point arcs attached to the through point (#2166) (#3610)
* claim: #2166

* Fix three-point arc through-point attachments (#2166)
2026-10-20 15:55:58 +00:00
kaltenbrunnermarkusandClaude Opus 5.5 2668518079 Section Analysis: dragging the cut stays smooth on large parts (#3616)
On an imported part with 2.5 million triangles, every frame of a Section
Analysis drag looked up the picked face's plane several times (each lookup
tessellates the whole body, about 0.1 s) and cut every triangle again for
the outline (38 ms).

- planar_face keeps its last answers for the model state they were found in.
- The outline cuts through a SectionIndex: the mesh's triangles sorted into
  slabs along the cut's normal, kept per mesh while the normal stays, so a
  cut looks at one slab (0.06 ms on that part) and finds the same segments.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:54:04 +00:00
rlartotandClaude Sonnet 5.5 e29a57dc3a inspect.interference/clearance: list mesh bodies as unchecked (#3249) (#3258)
* claim: #3249

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* inspect.interference/clearance: list mesh bodies as unchecked

Mesh bodies (STL, 3MF and OBJ imports) were filtered out before any pair
was formed, so two overlapping STL imports reported count 0 and an empty
unchecked list, which reads as "no collision". Each mesh body is now
listed in `unchecked` as {a: name, b: null, reason: "mesh body: not
checked"} by both commands. inspect.clearance also stops refusing a mesh
body named in `bodies` or `against` as "no solid body"; it is listed
instead. The parameter docs and the assemblies guide say so.

Fixes #3249

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

* docs: separate the mesh-body note from the paragraph above

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-20 15:42:39 +00:00
JakobonlyandClaude Opus 5.5 23b0120759 Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393) (#3408)
* claim: #3393

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: a radius dimension past an arc's end extends the arc to its arrow (#3393)

A radius or diameter dimension on an arc whose leader is dragged past the arc's
ends had its arrow pointing at empty space. The radial frame now keeps the arc's
span, and an arrow outside it gets the arc continued from the nearer end round
to the arrow tip and a little past it, as dimension drawings do. Full circles,
ellipses and arrows on the arc are unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:40:26 +00:00
SS-ENandClaude Opus 5.5 76b17f2663 sketch(feat): a click on another dimension inserts its name into the value being edited (#3186)
While editing a dimension's value, a single click on another driving
dimension now inserts its parameter name (a double-click no longer needed,
and its second click does not insert it twice). A lone value such as `10`
or `10 mm` is replaced by the name; an expression in progress keeps what
was typed and gets the name at the cursor (replacing selected text), so
`10 + ` becomes `10 + d10`. The cursor ends after the name and the field
keeps the keyboard.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:32:07 +00:00
83790139b1 Editing a sketch past the history marker rolls the marker to it (#2716) (#3339)
* claim: #2716

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Editing a sketch past the history marker rolls the marker to it (#2716)

Edit Sketch rolled the timeline back to just after the sketch only when
the marker was later. With the marker before the sketch it stayed there:
the sketch wasn't built, so it opened with no palette and couldn't be
edited. The marker now moves to just after the sketch either way, and
Finish Sketch puts it back as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 15:28:52 +00:00
Dahak BuildsandDahakBuilds 7bda28e786 Contact: a check finds bodies crossing face to face, not only a corner inside (#3323) (#3388)
* claim: #3323

* Contact: a check finds bodies crossing face to face, not only a corner inside (#3323)

The collision probe sampled each tessellation's points (vertices, edge
midpoints, triangle centres) against the other body, so plates crossing
face to face - where the crossing strip is smaller than a face triangle -
put no sample point inside and went unreported while inspect.interference
found the overlap. Where an edge of one body passes through the other's
surface, the middle of the chord it cuts lies inside; its distance from
that surface is the depth. Touching and grazing are unchanged. The sweep's
collision work model pays for the added edge pass.

---------

Co-authored-by: DahakBuilds <dahakbuilds@users.noreply.github.com>
2026-10-20 15:21:17 +00:00
JakobonlyandClaude Opus 5.5 2f5f65d6e3 Sketch: an angle dimension between two lines from one point measures the angle between them (#2724) (#3439)
* claim: #2724

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* Sketch: an angle between two lines from one point measures the angle between them (#2724)

An angle dimension on two lines that share an end (two radii of a circle, the
two sides of a corner) took the acute reading of the lines' directions, so
radii 120° apart measured 60° and 150° apart 30°. With no text position given,
the angle is now measured from the shared end towards the lines' other ends,
the reading anyone would mean; the supplement stays the alternative reading.
Lines that share no end, and dimensions placed with a text position, are
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

* ci: re-run the checks; the run on the last push was cancelled

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_0158is7fBbAVh538YmVF3MpZ

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 14:51:06 +00:00
bherbruckandClaude Opus 5.5 9e78e86b92 perf: renaming a body evaluates nothing (#3044) (#3095)
A body rename changes names only, but committing it went through the general
"design changed" path: the whole timeline was evaluated again. On an imported
assembly that means reading the STEP file again and meshing every body (about
100 s on the Prusa Core One, and the same again for undo).

When the only change from the previous design is one body rename (the
features' stored body names and the body-keyed maps the rename updates), the
model now renames the body in its results instead: every body keeps its
geometry and meshes, and the fingerprints are set to the renamed design's so
the next evaluation reuses everything. Undo and redo of the rename take the
same path. A rename the model can't follow that way (the body is changed or
named by a later feature, sheet metal, threads) still evaluates the design as
before.

`bench-open --ops script.json` times commands and their undo on an opened
design, with the view work each leaves.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 12:18:40 -04:00
Christian Svensson 511faedcfa Fix OpenGL startup with portable AO depth reads (#2888) (#2933)
* claim: #2888

* fix: preserve AO depth in a portable integer texture (#2888)
2026-10-20 11:41:40 -04:00