Commit Graph
22 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 55338e139e Kernel rig: each area's PATHS names only its own files, and EXEMPT lists only commands no case uses
The shared core (crates/smlib, the grader, doc eval.rs, engine features.rs and the kernel's core)
is in PATHS-ALL; the new areas' copies of it are dropped, so an area reruns on its own files and the
core reruns them all. sheet-metal also watches the sheet commands, the sheet document and the DXF
writer. 116 commands a case now uses leave EXEMPT; 25 geometry commands are still to cover.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 779532f63a Ladder 12: sheet metal, from a base flange to a bracket with a lip, each answer from its flat area
Base flange; an edge flange at 90 deg; four made together, the corners closed on the mitre plane
with the rule's gap, at 90, 72 (leaning out, the ends run on along a slant) and 108 deg (leaning
in, cut back); round, rectangular and tear reliefs; a hem; a fold, unfolded and refolded; the
tray's flat pattern (outline size and area, bend lines); a bracket with a hole and a flange on a
flange. K = 0.5, so every volume is T x the flat area. The 108 deg tray is a sheet-metal rig case too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 67dd8892f1 Kernel rig: bend table cases, JSON and CSV rows with angles, radii and K-factor allowances, and an unknown format refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 c114e6c35b Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 fce8e4a262 Kernel rig: perforation cases, square and staggered fields counted hole by hole, a field kept clear of a bend zone, and a pitch refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 c60bcb55e1 Kernel rig: path flange cases, a Z section, one line at 45 degrees down, and a path straight on refused
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 2edf649528 Kernel rig: hem cases, closed on a top and a bottom edge, open and flipped, on a flange, and one too short
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 02e1f18412 Kernel rig: each area runs only when the files its PATHS lists change, every area on the shared core
A plan job (scripts/ci/kernel_rig_plan.py, with its self-test) maps a pull request's changed files
to the areas: tests/kernel-cases/<area>/PATHS for each area, tests/kernel-cases/PATHS-ALL for the
shared core, the ladder whenever any area runs. Areas come from the folders, so a new one needs no
workflow edit. Pushes, merge groups, the release gate and runs by hand run every area. The
kernel-rig check counts a skipped build or shard as passed only when the plan selected none.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 b4fcd59100 Kernel rig: every area and the ladder as a parallel gate on pull requests that touch the kernel
kernel-rig.yml builds solidcraft-cli once (release, SMLib prebuilt; sccache on a sticky disk
that only pushes to main and develop commit) and hands it, with the rig's runner, to a matrix
of eleven shards: the ten areas of tests/kernel-cases/, each against its KNOWN_FAILING, and
the ladder against its golden. One path filter covers the kernel surface; drafts skip; a new
push cancels a pull request's old run; merge groups always run it, and the release gate calls
it. The areas other than fillets get a KNOWN_FAILING with only its header, to be seeded from
develop after the SMLib pin bump.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 21:08:31 -04:00
jyvikoandClaude Opus 5.5 cfaf4ab557 Kernel rig: the reason each refused sheet-metal, sweep, crash and ladder case must be refused for
Ten `refused` cases outside the fillets had no `refusal` since #8445 made one required. Each
was run; its refusal is the right answer for the reason its method gives, and that reason is
now its `refusal`.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-28 16:59:05 -04:00
jyvikoandClaude Opus 5.5 4856fd3df1 kernel-cases: #5198–#5463 triaged: 14 cases, 100 skipped
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:52 -04:00
jyvikoandClaude Opus 5.5 e47c338078 kernel-cases: #4830–#5197 triaged: 21 cases, 110 skipped
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:52 -04:00
jyvikoandClaude Opus 5.5 173000b44b kernel-cases: #4432–#4829 triaged: 21 cases, 175 skipped
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:52 -04:00
jyvikoandClaude Opus 5.5 5bc0dc6883 kernel-cases: #4161–#4431 triaged: 19 cases, 93 skipped
Cases from the issues filed after #4160, each a synthetic recipe with its own answer
(analysis or invariants); every other issue in the range is listed with why it was skipped.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:28:52 -04:00
Brennen HerbruckandClaude Sonnet 5.5 22fdb52498 kernel-cases: tessellation case from #466, skipped sources for sheet-metal, sweeps and tessellation
A revolved cone tip with an exact volume and area; auto-reports without
a design are listed in the skipped.json files.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 0ae42f4111 kernel-cases: sheet-metal skipped sources (87)
Every other sheet-metal-keyword issue and PR, one line each: UI, docs, file
format, naming and attachments, DXF output, feature requests, user designs
with no repro, and failures that belong to booleans, fillets, shell, sweeps
or threads.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 676670ba80 kernel-cases: sheet-metal tray and unfold cases from #349, #405, #436, #514, #723, #1797, #3417
Trays at 72 degrees and with four angles and heights, a tray shrunk by a
parameter and unfolded, an L bracket unfolded and refolded, opposite flanges
at 105 and 120 degrees, torn corners folded, and a rhombus whose square
reliefs would overlap.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 474f608536 kernel-cases: sheet-metal convert and unfolded tray cases from #479, #488, #723, #725, #839, #1092, #1285, #1481
Unfolded trays graded by the flat size W + 2(H - BD): torn, round and square
relieved corners, per-feature reliefs, rounded plate corners; a shelled tray
and a bracket converted at their bends; an L converted to the rule's radius.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 943a7d66b4 kernel-cases: sheet-metal flange and cut-out cases from #416, #529, #570, #601, #634, #659, #702, #978
A flange beside the leg of an L, along what a cut-out leaves of an edge,
beside a ledge as tall as its setback, a return on a flange's far edge, a
round hole, a slanted slot and an ellipse across a bend, a hundred slots with
four folds, and the refusal of rule values sheet.flange would ignore.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 b13155cbbf kernel-cases: sheet-metal cut-out, flange and refusal cases from #296, #1095, #1280, #1295, #1311, #1979, #3078, #3234, #3324, #3353
Cut-outs folded and refolded, a hole square to a 45 degree flange, a slot
that parts a flange from its base, an inside flange on a plate turned
62 degrees, cuts after cuts, a hole beside two adjacent flanges and a flange
on a flange's side edge; refusals for a flange on a bend line and a flat
pattern after a fillet; a mirrored sheet body that must stay sheet metal.
Volumes by hand (K = 0.5 folds: flat area * t; otherwise bend volumes).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 a11a736ce8 kernel-cases: sheet-metal convert and hole cases from #774, #1040, #1092, #3316, #541, #542, #560, #955
Plates converted to sheet metal (holes, long thin strips, engraving, a
channel with modelled bends, position kept) and holes and cut-outs
through or into a sheet; volumes by hand from the plate and the holes.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00
Brennen HerbruckandClaude Sonnet 5.5 3c465e6801 kernel-cases: sheet-metal fold cases from #262, #264, #638, #639, #685
Folds of tabs and plates, graded by closed form: a fold keeps the blank's
flat length, so V = flat area * t + theta * w * t^2 * (1/2 - K). Tabs
on one line (#264, #638), a tab on an L's inside edge (#639), a fold just
inside a tab root and a refusal at the root (#262), a fixed point on the
top face of a large plate (#685).

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
2026-10-27 02:28:45 -04:00