Commit Graph
10 Commits
Author SHA1 Message Date
PaddleStrokeandClaude Opus 5.5 6a4b5c90c8 Properties: measure faster, show progress, and stop when closed (#8706) (#8730)
* claim: #8706

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure faster, show progress, and stop when closed (#8706)

Properties on a large assembly measured every placed copy of every body
afresh (transform plus three fine tessellations each), so it took minutes.
#5203 (in #8103) already moved the measurement beside the window; this
builds on it.

- A rigid placement reuses the body's own cached measurement: volume, area
  and counts unchanged, centre placed, box from the placed corners (quarter
  turns) or from the body's shared mesh placed (other turns). Scaled or
  mirrored placements are still measured as placed.
- Bodies are grouped by component once and the subtree traversal groups
  occurrences by parent once (both were quadratic).
- The measurement beside the window is watched by a Progress: the card
  says "Measuring... n of N bodies" with a bar, and closing it (or
  switching designs) cancels the worker at its next body instead of
  leaving it running.
- component.properties and occurrence.properties are answered on a copy for
  control-channel requests too, as inspect.measure is.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: count the measuring work instead of timing it in the reuse test (#8706)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-31 16:04:38 +00:00
RyanandClaude Opus 5.5 5e0e168ae9 Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095) (#8103)
* claim: #8095

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: moment of inertia, principal axes and first moments of a part or assembly (#8095)

component.properties and occurrence.properties report each closed body's
inertia tensor about its centre of mass, and in total the tensor about the
total centre of mass (world axes, g·mm²), its principal moments and axes,
the first moments, and with `about: [x, y, z]` the tensor about any point.
The tensor comes from each body's welded export mesh, tessellated once per
body, scaled to the measured mass and turned by each placement; bodies add
by parallel axes. The maths is a new crates/geom inertia module.

The Properties window shows the first moments, the tensor, the principal
moments and axes, and the view marks the centre of mass with the principal
axes while it is open. Inspect → Measure → Properties now opens that window
(it ran the command and showed nothing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: Copy matrix, and the whole design's card titled just Properties (#8095)

Copy matrix, under the tensor, puts it on the clipboard as three lines of
tab-separated values at full precision, in the units shown. The card for
the whole design is titled Properties; one opened on a component,
placement or bodies keeps its name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Properties: measure beside the window, so a large assembly doesn't freeze it (#8095)

Properties ran on the window thread: 18 s on a 144-body design, with the
window answering nothing meanwhile (#5203). In the desktop app the card now
measures on a copy of the session on a worker, the way #4614 made agents'
measures work, says "Measuring…" until the reply is in, and Close drops it.
A quick measure still shows at once; headless, tests and the web measure in
place.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 13:47:44 +00:00
raykholo c3dd40405d Measure: open surface bodies report no volume or mass (#4257) (#4268) 2026-10-25 17:21:39 +00:00
CamWightandClaude Opus 5.5 9559ad398a Physical material: one rule for a body's material and its density (#4783) (#4785)
* claim: #4783

* Physical material: one rule for a body's material and its density (#4783)

inspect.measure, component.properties, occurrence.properties and the
Properties window took a body's material name from the raw assignment,
but its density from Document::density, which falls back to the default
material when the assigned one is unknown or has an unusable density. So
a damaged or hand-edited design read one material and weighed another: a
design material "Broken" at -3 g/cm³ read "Broken" at 1.29 g/cm³.

One rule, in one place:
- DEFAULT_MATERIAL (new, beside DEFAULT_DENSITY in the material library)
  is the default material's name. The library's first row uses it.
- Document::body_material (new, beside Document::density) is the material
  a body's mass is computed with, as the library or the design spells it:
  the assigned one when it is known and has a usable density, else
  DEFAULT_MATERIAL. Document::density is that material's density, with
  the same value as before for every input.

inspect.measure and the physical properties name body_material.
inspect.measure now names every body's material, measured or not, since
naming it takes no measuring; the density stays with the mass, on the
bodies measured. So the Properties window shows the engine's name without
a fallback of its own. The places that keep the assignment as stored
(configuration cells, material.assign, material.edit, material.delete
and the dialogs) only use the constant, so a configuration still keeps a
damaged assignment as it is.

The visible change: a body whose material is unknown, or has an unusable
density, reads "Default", the material it weighs, and a miscased name
reads as the library or the design spells it. A body inspect.measure
can't measure now has its material too. Masses and densities don't
change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-23 13:44:27 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
bherbruck a6bb8fc924 feat: stabilize face attachments and closed spline workflows 2026-10-11 05:32:46 -04:00
bherbruck c1d819f235 feat: preserve body history and placed modelling workflows
Record ownership transfers in the timeline so earlier Join/Cut membership,
world placement, machining data and styles survive component moves, edits,
independent copying, undo and reopening. Preserve pending positions in history
snapshots and keep constructor transfers ordered during feature redefinition.

Retain shallow sheet pockets and exact planar intersection islands through
unfold/refold, with depth-aware flat previews and DXF export. Store explicit
3D wire coordinate spaces and migrate known legacy provenance without moving
saved points or analytic fits.

Infer unique eligible cylindrical Emboss targets, align Revolve manipulators
with actual extent geometry, and discard obsolete preview errors after input
correction. Certify constructed and immutable imported face styles using exact
source metadata while preserving legacy face names. Upgrade designs to format10
with bounded validation and geometry-preserving legacy migration.
2026-10-11 03:59:12 -04:00
bherbruck 07932d0f42 feat: preserve modeling intent across sketches, assemblies, and fabrication
Persist typed sketch dimensions and bounded ordered configuration rules in format 8. Use exact occurrence paths and source identity for editing, movement, appearance, and mass. Preserve sheet material regions through cutting, folding, and exact DXF export; retain nested cavities and material islands.

Validation: cargo xtask ci passed, including 368 engine tests, 178 UI tests, 68 UI scenarios, 136 kernel tests, and the 10-crate wasm check. Actual preview workflows and legacy format-7 origin-corner reopening were inspected.
2026-10-11 01:28:01 -04:00
bherbruck d71bdb78ec feat: strengthen modeling, configuration, and assembly workflows
Preserve linked sketch identities through deterministic face projection and resizing. Fix origin-corner picking, persistent inline navigation, appearance editing, configuration styles, component properties, contact sweeps, sheet exports, analytic STEP offsets, and bounded rolling-ball fit accuracy.

Validated with full cargo xtask ci, native workflow screenshots, repeated enclosure replays, and analytic geometry regressions.
2026-10-11 00:37:26 -04:00