The profiler's kernel category is `solidcore` (the C API's `smlib` spans
went with the C++ kernel): the docs, the schema's description and the
tests that named it say so. The attribution row, deny.toml and the
workspace manifest describe solidcore as the kernel behind crates/smlib,
not a second backend; docs/design-container.md says a cache an earlier
build wrote on `smlib` is evaluated again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DtL5M41G8Nua7HvuFPZkmJ
* Keys: a sketch and the model kept apart on Scope
`command_for` fell back to the first enabled command bound to a key, so a model key pressed in
a sketch (F, Fillet) still ran the model command. A key now runs only a command of the scope
the view is in, or one that works everywhere; otherwise nothing fires. Inspecting, views and
file commands (`inspect.*`, `view.*`, `file.*`) count as everywhere, so Measure's I still works
in a sketch. #4432's `sketch_and_model_keys_are_kept_apart` is ported to `Scope`.
Not ready: main's `the_extrude_key_in_a_sketch_finishes_the_sketch` (#2815) expects E in a
sketch to finish it and open Extrude, which this rule stops.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keys: keep model keys out of sketches as an opt-in preference
The strict sketch/model split is now Preferences > Shortcuts > Keep model
keys out of sketches, off by default. Off, a key resolves exactly as on
main (a feature key such as E still finishes the sketch). On, a sketch
runs only sketch keys and keys that work everywhere (inspect, view, file).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* rustfmt
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7584
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
* macOS update: say to quit SolidCraft before replacing it (#7584)
After Download and open, the update window told people to drag SolidCraft
to Applications, replacing the old copy, then restart it. Finder refuses to
replace an app that is running ("the item “SolidCraft” is in use"), so the
message now says to quit SolidCraft first, then drag the new copy over and
open it again. "Quit" rather than "close": closing the window on macOS can
leave the app running.
The id update.dmg_opened is unchanged; every catalog that carries it is
updated, and the user guide's update tables get the same step.
Fixes#7584.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #5968
* Joint dialog: Find Limits fills the limits from where parts collide (#5968)
joint.find_limits sweeps each value of a joint both ways from where it is,
on a copy and with its own limits left out, and answers where the parts it
moves first touch another part, where a closed loop stops closing, or that
nothing is met within a turn (angles) or the parts' reach (distances).
Edit Joint's Limits section gets a Find Limits button that runs it on the
joint as the dialog has it, off the window thread, and fills the rows.
joint.sweep now tells touching bodies apart from the other bodies of the
same two parts: on the Hinge Assembly sample the pins touch where it starts,
and the plates used to pass through each other unnoticed.
* find_limits: read the session only
* find_limits: a joint with nothing to meet, edits during a search, tiny ranges
* find_limits: keep touching at the start per pair of parts
Per body, the Hinge Assembly sample's plates, which only come flush in
the end plane the two leaves share, stopped the search. The leaves never
pass into each other: the sample's answer is a whole turn.
* find_limits: touching boxes cost no collision work; stale results and rounding
* find_limits: each pair of bodies of resting parts held to its own depth; loops without bodies
* find_limits: a 32-bit budget it can pass, a repaint with the result, a bad form says so first
* find_limits: each pair of resting bodies gets its own margin
* find_limits: Arabic, Hebrew and Vietnamese strings (complete catalogs on main)
* find_limits: search the joint with Edit Joint's side picks
Edit Joint now keeps the joint's sides as picks in its inputs, and its OK
commands compare them with what it opened on. Built without them, the
commands Find Limits applies first asked for the sides again, so every
search failed.
---------
Co-authored-by: MateuszSychXpl <151755914+MateuszSychXpl@users.noreply.github.com>
* claim: #9274
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: placements start closed (#9274)
A large assembly opened with every placement unfolded, so the browser was a
long list to scroll through. Placements now start closed; opening one shows
its own placements still closed, and closing and reopening it leaves them as
they were. Find in Browser, a pick in the view, Expand All and Collapse All
open and close them as before.
Preferences > Interface > Components start open (browser_components_open)
keeps every placement open from the start, as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: scenarios and the icon audit open placements, which now start closed
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Browser: tests that read rows inside placements set the open-placements preference
Three tests added on main since this branch started (joint folders, Features
folder marks, group rename) look at rows inside placements, which now start
closed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
With a profile or face picked, clicking a face, vertex or parallel plane that is
not in the profile's plane now sets Extrude to To Object, not one more profile.
Clicking into the Profiles box first makes the next picks profiles again.
Preference extrude_auto_to_object (Tools) turns it off.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts, both sides kept:
- Cargo.lock, crates/engine/Cargo.toml: smlib's solidcraft-profile/solidcraft-step beside
main's solidcraft-testkit and the image comment.
- crates/doc/src/{eval,eval_more,name_lookup,project}.rs: smlib's "a stored name finds its
face or edge or asks to reselect" logic kept; main's long-name quoting (#8673) applied to
its messages. Main's split-name hole re-lookup (#10699) dropped: names here never report
split.
- crates/doc/src/lib.rs: both exports, with main's revolve_extent_for_handle.
- crates/engine/src/cmd/silhouette.rs: main's outline()/Silhouette split, on the fallible
world_state().
- crates/engine/src/cmd/sketch_project_tests.rs: both tests.
- crates/ui-egui/src/{canvas,hole_refs}.rs: main's anchor_item/model_text on
open_meshing::session_world.
- crates/ui-egui/src/preview.rs: main's cut_tint switch around smlib's kept-surface ghost
filter; both helpers and both tests.
Seam fixes: FeatureKind::Repair in main's kind_key/type_name_to_kind_key (#10748); main's
new world_state() callers in ui-egui use session_world or unwrap in tests; a sketch test's
Spline gets nurbs: None.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
Conflicts: Sketch Project keeps develop's exact pieces (a free-form edge as one spline) and
takes main's test for a spline that follows a circle, sampling every free-form piece; the
silhouette takes main's per-face facing, with develop's corner normals where a face has none;
the extrude dialog caches main's automatic operation over develop's fallible call.
world_state() is fallible on develop: main's new callers handle its error.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SdcgEu4Lr3moCCisdZShKz
* Sketch: a construction line with a length can be a normal line (#10258)
`construction: false` on a construction line command that has a
`length` makes the segment a normal sketch line, ready to close a
profile, instead of construction geometry. The default stays
construction, and an infinite line is always construction.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a length box in the construction line tools (#10258)
The horizontal, vertical, parallel and perpendicular construction line
tools show a Length box beside the pointer from the start. It stays
empty (shown as infinite) and leaves the keyboard to the tool's
shortcuts until a digit is typed; then the box takes the keyboard.
Without a length the tools work as before: one click, an infinite line.
With a length the first click sets the start and a second click the side
the segment runs to, sent as the command's `length` and `near`, so the
segment gets its length dimension. The angle tool has a Length box
beside its Angle box. A typed length keeps the start's snap, and the
preview draws the segment the click will create.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a construction/normal switch in the construction line tools (#10258)
A Construction | Normal switch sits under the Length box of the
construction line tools. Normal sends `construction: false`, so a
segment with a length becomes a normal sketch line, ready to close a
profile, without converting it afterwards. The switch starts at
Construction with each start of a tool. An infinite line is always
construction, so without a length the switch is greyed out and its
tooltip says why. It belongs to the tool alone: the Sketch Palette's
drawing line type (X) is left as it is.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With several bodies to send (after Add all bodies, say), the Print face
input refused every face. It took a print face only when exactly one
body was sent; any other pick was cleared at once, with a note in the
status bar only. Each body's print face then had to be set with Ctrl+B,
or by sending that body alone.
The input now holds the print face of each body being sent. A face
picked in it becomes its body's print face, in place of the one it had.
A click on a body's print face takes it out and clears only that body's.
A face of a body that is not being sent is refused with a message
(`ui.print_face_body_not_sent`, in place of `ui.print_face_one_body`).
Each change is still one `body.print_face` command, so it undoes on its
own. Picks in this window are no longer widened to the other pieces of
the face's surface, so a click on a print face takes it out rather than
adding its neighbours.
The user guide (guide/files.md) says so. The new message is in
assets/locales/pending/print-face-each-body.json, in all 31 languages;
the old one is removed from the catalogs.
Test: dialogs_save_mesh::tests::the_print_face_input_takes_one_face_for_each_body_sent
(fails without the change: the second body's face is refused).
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10258
* Sketch: construction lines with a length (#10258)
The horizontal, vertical, angle, parallel and perpendicular construction
line commands take an optional `length`: the line becomes a construction
segment from `at`, running towards `near`, held by a length dimension
that follows its expression. Without `length` the line stays infinite,
as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Markus Kaltenbrunner <kaltenbrunnermarkus@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #10063
* docs: add a design approach and workflows chapter to the user guide (#10063)
Adds guide/design-approach.md after the window tour: the parametric idea, principles for designs that change well, the timeline and rollback marker, bodies vs components and occurrences, common workflows with links, a term map for users of other CAD software, and where to find help.
* docs: match the chapter to the app's labels and sketch colours (#10063)
Checked in the web app (0.29.0): the timeline strip is headed History, the toolbar shows New Sketch and Parameters for Create Sketch and Change Parameters, and fully constrained geometry turns white in the default dark theme rather than dark.
* docs: tighten the design approach chapter's wording (#10063)
The glossary covers most, not all, of the chapter's terms; Redo moves forward; the timeline is shown as the History strip; Report a bug drafts a report for the user to file and sends nothing itself.
* claim: #10218
* Assembly: move sketches to the part they're drawn on (#10218)
`component.move_sketches.to_parts` moves each given sketch, or every sketch in the design, whose
plane is an exactly attached face of a part's body into that part through
`component.move_sketches`, as one undo step. Sketches with no single part to go to stay where they
are, and the reply lists what moved and what stayed, with the reason. The Sketches folder's menu
offers it for the folder's sketches (or the selected ones), and a sketch's menu for that sketch or
the selected sketches; the status bar says how many moved and why the others stayed.
`component.move_sketches` now keeps a face-attached sketch where it is on its face: the sketch is
authored in the new component's placement (the face's own when the component owns the face), and
its picked point and repair plane are carried into it. Before, a face-attached sketch moved out of
the design was left without an author placement and failed to evaluate.
* Tests: the moved part is free to move; face anchor path
* Tests: move the to_parts test to the component command tests
* Shorter label: Move Sketches to Their Parts
main beb35029a (Release 0.29.0), develop 05f5e8601. Committed as resolved and
not yet compiling; fixes follow by layer.
Where the two sides could not both stay as written:
- Section caps: develop's stencil crossing count (with hatch by part) kept;
main's WINDING/NOT_CAP marking and its fs_solid_touch removed. main's #9407
test is kept and has to hold on the count.
- crates/kernel/src/prism.rs: develop's, which has no 3D prism boolean; main's
#6904 route has nothing to change there. Its test still has to be ported.
- Continuity legend: main's details card, with develop's G3/G4 classes.
- inspect.analysis one at a time: while main's "several analyses" preference is
set, turning one on leaves the others on.
- Model cache: FORMAT 8, since neither side's reader reads the other's records.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MNXLXkZLQ6T7TSi4wswcmk
* Sketch Ellipse: Major radius and Minor radius boxes while drawing (#10279)
The Ellipse tool showed no value boxes. After the centre it now shows
Major radius, after the end of the major axis Minor radius; a typed value
places the point at that size and becomes the ellipse's dimension, as for
a circle's Diameter. sketch.draw.dimensioned takes major_radius and
minor_radius for sketch.ellipse, so Dimension new shapes covers it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: test the typed radii in the tool and in sketch.draw.dimensioned, and say so in the guide (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch Ellipse: rustfmt the new engine test (#10279)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: consolidate Gruvbox contrast variants
* Consolidate Gruvbox variants into light and dark contrast choices
* Check both original Gruvbox viewport gradient endpoints
* Reset Gruvbox scenario state before independent theme checks
* claim: #10215
* Sketch: an option to make the part active when sketching on its face (#10215)
Preferences › Sketch › "Sketching on a part's face makes that part active", off by default.
When it is on, a sketch started on a face of another component's body activates that component
at the picked placement first and is made there, as after an explicit activate. The part stays
active, so what is built from the sketch lands in the same part.
For scripts the same is `sketch.create` `activate_part: true`; the reply's `activated` names the
component and placement. On an error the active component goes back to what it was.
* Tests: a free part, no edge projection, the sketch on the face plane
The three sketch chamfers take `points: [corners]` (a point reference or
{a, b} each), as sketch.fillet does: every corner is cut alike in one
edit, and a corner that can't be cut, or is named twice, refuses them all.
The Chamfer window sends every picked corner instead of refusing a second.
Claude-Session: https://claude.ai/code/session_01PVKpSVXR9iiwSM9B25kpvq
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9743
* Update Links: linked designs that changed while the tab was away come back as one undo step (#9743)
Coming back to an assembly's tab read each changed link in an Update Links
run of its own, so each became its own undo step: one Undo took back one
component and left another copy of the same part at the new version.
component.update_links now takes `components`, a list, and goes on past a
design it cannot read: that link keeps its bodies, is named in `failed` and
gets a warning. The tab return sends one request with every changed link,
records as read only the ones that were, and says on the status line which
one could not be read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9489
* Sketch: the Line tool can switch to a tangent arc and back without changing tool (#9489)
With Preferences > Sketch > "Rest on a line's last point to switch to a
tangent arc" on (off by default), leaving the chain's last point and resting
back on it for 0.35 s makes the next click a tangent arc, by the existing
sketch.arc.tangent command, and the same gesture goes back to lines. A label
at the cursor says which. sketch.arc.tangent's end can now name an existing
point, so an outline drawn this way closes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: the cursor label names the command in words (#9489)
The label asked the catalog for a message id that doesn't exist, so it showed
the id. It now takes the command's translated label, and the test checks the
words it paints. Moved clear of the pointer's own badge.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9333
* Equation curves: the variable can carry its range's unit (#9333)
A curve can set variable_unit "range" (or tick the new box in its window): the
variable is then a length, so a ^ 2 / (4 * t) is a length when a is one. Start
and end must both be lengths, or one a length and the other a plain number in
the design's unit; anything else is refused. Saved only when set, as one pending
format change; without it curves behave as before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Claim #9739
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: one changed while the assembly was closed is read when it opens (#9739)
A link now keeps the SHA-256 of its design file's bytes as the assembly
last read them (DesignLink::file_sha256, a pending format change), set by
Insert Design, Relink, Extract to File and Update Links. component.links
reports `changed` from it, hashing a file again only when its time or
size changed (vfs::design_path_stamp, behind the design-path rule). The
app treats a link it meets for the first time whose file changed as not
read yet, so opening an assembly, in its own tab or in place of the blank
design, reads those parts again as a tab coming back does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Linked designs: read what changed last when a design opens in place of the blank one (#9739)
A read is taken up only by the design revision it started from, and
adopt bumped the revision after starting it, so the read was dropped.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* claim: #9860
Co-Authored-By: Claude <noreply@anthropic.com>
* Sketch panel follows Dialog buttons at top (#9860)
The Sketch panel drew Finish Sketch, Look at and Slice in a footer under
its options even with Preferences > Interface > Dialog buttons set to
Top. Panel::palette now reads the same published preference as the
feature cards and draws its footer row under the header, above the
options, when it is Top. With the preference off nothing changes.
Changes a default: no
Co-Authored-By: Claude <noreply@anthropic.com>
* Docs: Dialog buttons at top also moves the Sketch panel's Finish row (#9860)
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
The last 106 commands on the backlog get the two-sentence help under
their tooltip, in English, German, Japanese, Chinese, Arabic, Hebrew and
Vietnamese: Surface, Sheet Metal, Plastic, Inspect, Construct,
Configure, Parameters, Library, View and the few single ones (Bill of
Materials, Frame Member, Pattern on Path, Convert Mesh, checkpoints).
With that the backlog is empty, so it goes: the test is now
every_toolbar_command_has_help, and the docs that mentioned the backlog
say so. The help tests use sketch.drag, which is not on the ribbon, as
the command without help.
On Linux the window always had no OS decorations and drew Windows-style
caption buttons in the application bar. SOLIDCRAFT_TITLEBAR=system, or
"titlebar": "system" in graphics.json, now opens the window with the
desktop's own title bar and buttons (server-side decorations where the
compositor offers them). The default is unchanged; Windows and macOS
are unaffected.
Claude-Session: https://claude.ai/code/session_01Gnm1n2PVPqghMuR9kHWXfh
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
joint.create's flip text and the assemblies guide said two origins at one
point with the same z stay as they are; a point origin without x takes its
x from z, so a part turned about z turns back. Say so, and point to giving
x on both origins or joint.as_built.
edit.checkpoint and edit.restore_checkpoint now say that restoring or
forgetting uses the checkpoint (and later ones) up and that only the last
16 are kept, and the "no checkpoint N" error says why. The editing and
mechanisms skills no longer read as if a checkpoint can be restored twice.
Co-authored-by: thocsmith <193096300+thocsmith@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #8510
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Measure: drag the labels away from the part (#8510)
The distance and X/Y/Z labels in the view follow a drag of the pointer and keep
a leader to what they measure; a double-click or a new measurement puts them
back. A press on a label picks nothing, starts no box selection and opens no
Select Other.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9105
* Sketch: alignment guides from any hovered point while drawing (#9105)
While a drawing tool waits for a point, hovering a line or arc end, a
rectangle corner or a free point wakes the same temporary horizontal/
vertical tracking guide as a circle centre or line midpoint. Idle
hovering keeps centres and midpoints only. Preference
sketch_tracking_points (on) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #9680
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: drag over the eyes to show or hide many rows at once (#9680)
Press an eye and drag up or down over other eyes: each eye the pointer passes
takes the first eye's new state (shown or hidden), and the whole drag is one
undo step. A plain click is unchanged. Dragging near the list's top or bottom
edge scrolls it. A component's eye now goes through browser.visibility, so it
is undoable like a body's.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: fix the eye drag's undo merge and layering (#9680)
Merge the drag's steps from the undo depth noted at press, when the design
and visibility still match, instead of searching the history. Run the merge
every frame from logic(), so a release under an overlay is never missed. An
eye under a popup or tooltip no longer takes part in the drag. Adds a
regression test for a drag from the Origin's eye after a show.
Co-Authored-By: Claude <noreply@anthropic.com>
* Browser: say when the eye drag's undo merge gives up (#9680)
Co-Authored-By: Claude <noreply@anthropic.com>
* Gallery test: the eye-drag state key is not a renderable element
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: bherbruck <tenbee91@gmail.com>
After a lost device the next start began from on_exit, while eframe was
still writing app.ron, and the old process then hung in
vkDestroySwapchainKHR on NVIDIA. Start it from Drop for App instead, after
eframe has joined the settings save and before it drops the window's GPU
surface, and end the process there after a loss. The update restart moves
there too. The loss reason is passed to the next start and shown in its
note.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Quick measurement: the selection's length, area or distance in the view's corner (#7000)
With edges, faces, sketch curves or points selected, the view's bottom right corner above History
shows what they measure, as the Measure tool lists it: an edge's length (Ø and R for a round
one), a face's area, a point's position; two items' distance and angle; several edges' or faces'
count and total. It is computed off the window thread from a copy of the session whenever the
selection or the design changes, and a click copies it. Preferences > Interface turns it off. The
Measure dialog's rows come from the same function.
* Quick measurement: off by default, turned on under Preferences > Interface (#7000)
The quick_measure preference now defaults to false, so nothing changes until it is turned on.
Its tests turn it on, and a new test checks that nothing shows until it is.
A comma separates arguments only directly in a function call, so plain
parentheses take a decimal comma like the rest of an expression:
`-(width-0,5)/2`. The UI no longer rewrites commas before wrapping a value
in the design unit's parentheses.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Help: add manual update checks and status window
* Test manual update checks and localized results
* Add update check to the native Help menu
* Localize Help update checks in all app languages
* Document manual update checks from Help
* Document ui.help updates control action
* claim: #5574
* Pick hidden geometry near long clicks in a five-row list (#5574)
* fix: make Select Other configurable and fit its list to the window
---------
Co-authored-by: Kirill Frolov <k.a.frolov@vk.team>
* claim: #7944
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Theme: System follows the desktop's dark/light setting on Linux (#7944)
On GNOME (Wayland, or X11 through XWayland) the window toolkit never reports
the desktop's dark or light preference, nor its changes, so Theme: System kept
its colours. The Linux app now reads org.freedesktop.appearance color-scheme
through the XDG Desktop Portal's Settings interface (then GNOME's color-scheme
and gtk-theme when it has no preference) on a thread of its own, follows the
portal's SettingChanged signal, and falls back to gsettings or a slow poll.
The window reads the answer through Services::desktop_dark; the decision from
the raw values is prefs::desktop_prefers_dark. Windows and macOS keep the
window toolkit's theme.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>