A torus face covering most of its tube off the tube's quarter lines (an
exhaust collector's bend: 326° of the tube from −113.8°) needed a fifth
quarter along the tube, which STEP counts from the outer equator: its form
ran past a full turn of the tube and SMLib refused the solid. #8496 turns
frames about the axis only, and the torus label had no tube reference.
The torus label gets a tube start (`tube_start`, radians; 0 and left out
of the record by default, so older records mean what they did): v counts
from there, in every evaluator, form, pcurve, iso curve, tessellation,
placement, SSI and SMLib transfer. A spilling torus face's tube start moves
to where its tube begins, or a turn before where it ends, whichever puts
its tube circles on the grid of a round face they are about the axis of
(a pipe's cylinder meeting the bend); circles round the tube are labelled
from the tube start (brep::form::on_tube), so their forms and pcurves lie
on the face's quarter grid exactly. The saved-format change is one file,
crates/doc/src/format/pending/torus-tube-start.rs.
Engine assembly: COLLECTOR_EXHAUST_VER_1 now comes in as a closed solid
(refused 3 -> 2); Poppy Humanoid unchanged (4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shell's `forward` is about the surface the face's (u, v) are on, its NURBS form when it has
one, which may run against its cylinder, cone, sphere or torus. The kernel read it against the
analytic surface, so a fillet's bore whose form runs the other way was a shaft and an M10 thread
was refused in its 8.5 mm hole. `Face::form_turns` says when the form turns the normal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every lib warning under --features smlib outside the files agents are editing
(assemble.rs, sweep_path.rs) pointed at code nothing calls any more:
- body: shell_nesting;
- boolean_record: of_pair and its Traced alias;
- planar_regularize: the generated-wall regularization (and its branches in the
certified one, which was its only other path); planar_sources:
with_shell_planar_sources;
- plane_fit: plane_through, EdgeSampler, planar_face, plane_frame (the patch is
fill's); only loop_area is left;
- polyhedron: solve3; prism: wall_along; offset: Surf::normal;
- record: regions, region; shell_groups: groups, parents and their limits;
- splitface: side_of_point, Analytic, analytic_face, face_sides, canonical;
- spline_conv.rs, all of it (surfaces builds NURBS records); an unused import in
tess/uv.rs.
The tests of deleted items go with them: prism's wall_along test, the shell
grouping test in body_lump_tests, and the generated-regularization assertion in
regularization_protection_tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
heal: a body's faces on one surface merged and its edges on one curve joined by SMLib
(Brep::merge_faces, SmBrep::RemoveTopologicalEdgesAndVertices), the edges along its split lines
kept, with SMLib's history over the body. Its booleans already end the same way
(SmMerge::BooleanPostProcess). The truck healing is deleted with what only it did: coplanar and
collinear merges by hand, flat surfaces rebuilt as planes, and approximate edges refitted as
lines or arcs from samples. on_split_line stays; edge_points reads a record edge.
Deleted, with no port: the retries around the old boolean's failures (touching_walls,
bore_guard, tangent_cylinders, sphere_lens, tool_reseam, candidate_reach). Each re-ran a failed
boolean with a changed tool or split faces; SMLib's boolean is the one path, and a case it
fails is its defect to fix there. Their own tests go with them (the helpers' unit tests in
issue_788_tests, bore_union_tests, candidate_reach_tests, and sphere_lens' relaxed-tool test);
the #2750 lens cut's result test stays, as a boolean test, without the retry diagnostics.
Heal's tests built truck prisms and a truck spline edge: deleted.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
The emboss is built from the body's record: the wall's face loses the profiles' footprints,
each profile adds planar walls and its cap on the wall's cylinder at the new radius, and SMLib
builds the body from the finished record (assemble.rs: a record taken apart and finished again
in canonical order, pcurves from the record's routine for new uses, the record's own for kept
ones). surf_of and with_same_surface read the record's analytic surfaces; the topological
offset and draft that only the old kernel used are deleted (SMLib's offset faces and draft in
offset_backend replace them).
#3782: the saved pick had to lie on the half of the wall the sketch is tangent to (its angle
inside that face's span). The wall is every exterior cylindrical face of the body (a stepped or
interrupted cylinder is refused before), so the pick is checked on the cylinder between the
endcaps. The sleeve test's far-side pick now succeeds; a pick on the bore is still refused.
(not built: base in progress)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_017itGh5fpMEousnZ91cYcVt
truck placed a face that no intersection divides (every face of a shell
that meets nothing of the other) by counting the faces a ray crosses,
taking each face's surface as stored. A revolved body's reversed faces
counted the wrong way, and an inward shell (a void, a cut's inverted
tool) was read as a solid: a cut beside a sealed void came out empty,
refused or, with a tool whose bounding box covers the target, taken with
the body gone. Intersections of such bodies came out empty as well.
In an AND the crossings now count as each face is oriented, and an
inward shell holds what lies outside it. An OR keeps truck's count.
The corrected cut let a folded offset through: an arc edge next to a
face it meets tangentially had its ends moved past its middle, and the
arc went the long way round (robustness seed 73's shell). The offset
refuses an arc whose middle crossed its chord, as it does a straight
edge that turned round.
Goldens: seeds 0, 45 and 77 had a cut refused as empty that now takes
what it should; their volumes are checked by hand in the PR.
Moved in by more than its radius, a round collapses and its neighbours meet
along a new edge. That edge was always built as a straight line keyed by its
ends, so on a disc whose circular edge is rounded the four arcs where the floor
meets the side became one chord used by four faces, and the shell failed with
"This shell is not oriented and closed" (#319).
The new edge now runs where the edge's face meets the face across the round
(the round's far side, crossed as a strip), through the edge's middle moved
onto both: a line or a circular arc, checked to lie on both moved faces, and
refused otherwise. Twins are the new edges with the same ends through the same
middle.
Fixes#319
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Fillets (local, loop, rolling ball, corner, variable, chord), chamfers
(cutters, local corners, loops, two sides), shell, draft, offset faces,
split face/body, delete face, patch/copy/stitch/trim/extend and
transforms record their history over [body] while they build: faces
rebuilt from the body's, blends in place of edges (corner patches in
place of the edges at the corner), shell walls as offsets, edges as
pieces of the body's or where two faces meet. Multi-step operations
compose each step. The push-face offset fallback now has history, and
the bore union composes its narrowed tool.
A reflection reorders a body's edges, so transforms now match edges by
identity (mirrored copies reported the wrong edges).
Refs #136
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
Shelling a body through a face that a convex round meets tangentially, with
the round at least as large as the thickness, puts the cavity wall through
the rim where the round meets the open face. Both shell strategies then fail
and the first one's generic error ("a corner whose faces don't meet the same
way after the move") was reported. The shell now says why and what to change.
Successful shells are unchanged.
Found by fuzz seed 33, which reaches this case now that a disc's two edges can
be rounded to half its thickness.
Claude-Session: https://claude.ai/code/session_01TWc1smHYwTSVrVc8SNvS44
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The check is geometric, not a tuned threshold: on the reported basin (18 mm rim, sloped bowl wall) the rim strip reaches zero width at 15.17 mm and the shell is refused from there on. Tolerances only absorb rounding (scaled to the body size), and at most 2000 straight edges per face are compared pairwise. Arc edges and curved faces are not checked.
This is a guard, not the full fix. Building such a shell needs the offset to change topology: drop the strip that collapses and let its neighbours meet, as offset_body already does for rounds thinner than the move, extended to planar faces. That is substantially more work in the most delicate part of the kernel (rims, ledges, steps, arc-bounded strips) and is left for a separate change; until then the workaround is to model the hollow directly (an offset loft and a box cut).
- solvecraft-cli fuzz / fuzz-one: seeded random modelling sessions (boxes, extruded profiles with arcs, revolves; joins and cuts of boxes, cylinders and spheres, fillets, chamfers, shells, holes, patterns) on a grid that makes coincident faces and tangencies common, every step checked (command ok, every body a sound solid via the new Body::validity, volume moving the right way), plus the boolean volume identity on random primitives; one process per seed with a time limit; failures minimised to scripts
- shell/offset: corners where a curved face meets another at an angle are refined onto the moved surfaces (Newton); edges that are neither lines nor arcs are rebuilt through their moved points; one shell per piece; faces that would cross say so (not supported yet) instead of leaving a cavity inside out; flat revolved faces count as planes; the unhealed body is tried when the healed one fails
- cylinders start their seams at an odd angle (grid-aligned seams broke booleans along them)
- partial revolves of profiles touching the axis build no zero-area face on the axis
- booleans on bodies in several pieces retry a piece at a time
- regression tests for each, and a fixed set of seeds in cargo test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
The merged face count no longer joins faces across a Split Face line, and Offset Face's same-surface grouping stops there. A piece whose move the body's topology cannot follow (its neighbour stays put) is swept along its normal and joined on or cut in, giving walls along the split line as in Fusion. Engine test: a split box top counts 7 faces; one half up 5 (27000 mm³), the other down 3 (25200 mm³).
Fixes#12
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT