* Render output: Effects and Check sections, Size presets panel and the Check tool chip
* Render output: Sampling, Effects and Check editors as child rows under Output
* fix: restrict legacy Output controls to test builds
* fix: cover status controls and reveal Effects test targets
* fix: include shared quality reviews in copied check reports
* fix: remove the obsolete Effects GPU guard after Wear integration
* Render wear: a Wear row and editor for the aging layers
* test: read Wear header text from accessibility label values
* test: restore body picks for Wear header recovery assertions
* Render environment editor: rotation, intensity, backdrop colour and ground through render.environment.set
* Render environment editor: rotation ring in the view with one undo step per drag
* Render environment: Source, orientation, backdrop, ground and atmosphere sections
* Keep segmented controls inside their allocated rows
* fix: compile legacy environment controls only for tests
* claim: #3693
* Fix timeline playback to show each rebuilt feature
* Move History playback into the Inspect ribbon
* Refuse Play History up front when playback couldn't run
Starting Play and the per-frame check that stops it were looking at
different app state, so Play could be accepted during an apply, a delete
check or queued history work and then stop silently on the next frame.
Both now use one playback_blocked check.
The UI also reads the engine's PlaybackAction as the typed enum instead of
matching strings, so a bad reply is an error rather than a quiet toggle.
* Put Play History in the History controls
History now shows five controls in transport order: start, previous,
play, next, end. Play runs timeline.play, so it turns into Stop while
playback runs, same as the ribbon button and the shortcut.
It's on by default (#3688, #3740, #4216). Anyone who wants the old four
controls back can right-click them and pick Hide Play Button, or clear
history_play_button under Preferences > Interface. In a named vertical
History too narrow for five buttons beside its grip, Play is left to the
ribbon rather than overlapping the grip.
* Draw the History Play button as a plain play/pause glyph
The Play button in the History controls now uses the same drawn glyphs as
its neighbours: a filled triangle, and two bars while History plays. The
triangle is bigger than the step arrows so it doesn't read as Forward.
The ribbon command keeps its timeline_play and timeline_stop icons.
* Keep the playback changes clear of PRs queued ahead
Several PRs in the merge queue touch the same lines, so this moves ours
aside without changing behaviour:
- history_play_button and its reset-test row sit with the other History
preferences, not beside view_confirm_corner (#7248 adds status_bar there).
- History keeps main's history_transport_width() for four controls (#6430
and #7459 call it); the Play button's count uses history_controls_width.
- A new or opened document stops playback after dim_view::cancel(), clear
of the line #7819 adds after reset_chat.
- The Play/Stop label swap moves from interactive_command_info, which #7906
rewrites, into the ribbon's command_info.
* Stop playback after the command completes, clear of #6433#6433 rewrites the session.execute line in execute_command, and our playback check sat right under it, so the queue couldn't merge the two. Checking the revision after command_completed does the same job a couple of lines later.
---------
Co-authored-by: cfaulkingham <colin.faulkingham@gmail.com>
Two new commands, view.next_tab and view.previous_tab, with Ctrl+Tab and
Ctrl+Shift+Tab as their default keys: they appear on the Keyboard Shortcuts
page and can be rebound or cleared like any other. The window steps along the
tab strip and goes round at either end; one design alone stays as it is, and
a "save changes?" prompt keeps its tab shown. The engine only echoes the
step (no design edit, no undo step); engine.batch refuses them like the
other steps that go to another design.
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: sheet.* typed parameter schemas
* Sheet metal feature commands: typed parameter contracts
sheet.flange, sheet.perforate, sheet.hem, sheet.fold, sheet.unfold, sheet.refold and
sheet.convert read their parameters by hand, so a misspelt key or a value of the wrong
shape was ignored or failed late, and describe_command had only prose for them.
Each now has a contract in schema/sheet.rs, checked in front of the unchanged handler,
and returns FeatureResult. The values no shared type fits (sheet-edge points, an edge
flange's edges, a fold's line and fixed point, the flange type, the positions, the
relief shape and the perforation pattern) get types that call the handlers' own
readers, split out of cmd/sheet.rs, and give their messages. The rule's values
(thickness, K-factor, bend radius, reliefs) stay out of the contracts: the handlers
refuse them, and strict refuses them as unknown keys.
A test passed a nested `base` object whose `sketch` the flange never reads; it now
names the sketch at the top level.
Part of #2829 (#6581).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sheet metal contracts: a further bend's angle stays as lenient as before
The flange handler reads a `then` bend's `angle` that is no expression
(`true`, a list) as left out and bends it 90 degrees. The rebased
contract had moved that check into the shared reader, so the handler
refused such a call even with the check off.
The reader is back to the handler's behaviour, and `ThenSteps` is the
stricter one, as the schema guide asks: warn reports such an angle and
strict refuses it. Tests cover the reader's leniency, the type's
refusal and the three check levels on one flange.
Part of #2829 (#6581).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Lists many PRs add to: no written lengths, one file per theme (#7747)
* xtask lists: the fixed-table allowlist in order, each with its own reason
* Lists: the wide-character blocks and the drawing scale presets as slices too (#7747)
* Lists: the drawing units test reads UNITS as a slice (#7747)
A new command, sketch.spline.reverse, runs a spline the other way: its
point list is reversed in place, so its last point becomes its first and
the curve keeps its path (chord-length fits, uniform clamped knots and
closed fits read the same both ways). Points and constraints stay. A
projected spline and one an offset uses or makes are refused. The
sketch's right-click menu offers it for one selected spline.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Links: update linked designs that changed while the assembly's tab was away
A design coming back to its tab compares the modification time and size of its linked
design files with what they were when it went to the background, and runs Update Links
on the worker thread for those that changed: saved in another tab, another window or by
a checkout. Preference update_changed_links (Design, Linked designs) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Docs: the assembly guide says linked designs update when their tab returns
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: Vietnamese strings, now that vi is a complete catalog
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: remember what each design last read, so an update that fails is tried again
A design's linked files are now recorded as the design last read them: when Update Links reads a
link without an error, or when the link is first seen. Coming back to the tab reads again what
differs, one link per run, so a file that cannot be read holds up no other and is tried again
the next time, and a part changed while the assembly was shown is taken up on its next return.
Closing several tabs together reads nothing on the way, and the web build, which keeps no file
times, looks at nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Links: no read during a save-changes prompt, records for adopted designs and missing files
A tab shown to answer "save changes?" reads no link before its save, and Cancel there or on a
batch lets the tab left in front read what it skipped. A design opened in place of the blank one
records its links at once, a link whose file is missing is recorded as missing so it is read when
the file comes back, and a read queued for a design that is no longer shown by the time it starts
is dropped. More changed links than can wait at once are read on the next return.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Assemblies: edit a linked component in place, with the assembly around it
Activating a linked component opens the design it comes from in a tab of its own, with the
rest of the assembly drawn faded around it where the component sits, so the part's own history,
browser and commands are at hand. Finish Editing in the browser saves the part, goes back to the
assembly and closes the part's tab when the edit opened it; coming back to the assembly updates
the changed link (or Finish Editing runs Update Links when that is turned off). Update Links in
the part also reads the assembly's links again, off the window thread, and redraws the assembly
around the part; a result for an assembly changed meanwhile is dropped with a message.
The part is an ordinary tab, so saving, autosave, recovery, closing and quitting treat it as any
other design. The model scene's ghost triangles are now drawn (only the preview's were).
Preference edit_linked_in_place turns it off. Builds on the update of changed links when an
assembly's tab returns.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a double-click opens it, Activate only activates
A double-click on a linked component edits it in place, in the browser as on a face in the
view (around the placement clicked), and the component's menu gets Edit in Place. Activate and
the browser's radio button make it the active component as they always did, so a linked
component can still be activated without opening its design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Double-click on a component's face: edit a linked one in place, activate any other
A double-click on a face in the view activates the component the body belongs to, at that
placement, as a double-click on its row does; a linked one is edited in place. Bodies of the
design itself or of the active component are left alone, and so is a double-click with a
modifier. One preference, double_click_components, covers both gestures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from review
An edit whose part never opens is forgotten instead of starting on a later open of the same
file, and the web build starts the edit after its synchronous open. Finish Editing goes on only
for a save into the linked file and in the part's own tab, waits for a "changed on disk"
answer, and says so when the part was saved elsewhere. Showing the assembly no longer drops a
refresh, which now records the links it read so coming back reads nothing twice. The faded
assembly is worked out once per picture, a bad mesh index skips its whole triangle, and the
last two status texts come from the catalogs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Finish Editing on the MODEL tab and the mouse's back button
Finish Editing is a command now, component.finish_edit, with its schemas: the app window
answers it, anywhere else nothing changes, as with view.fit. While a linked design is edited in
place the MODEL tab ends with a FINISH EDITING panel, pinned at the right as FINISH SKETCH is,
with a new left-arrow icon; the browser keeps only the line naming the assembly. The mouse's
back button, or a keyboard's Back key, finishes too unless a dialog, tool or sketch is open.
The assembly guide describes editing in place.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second review
Saving the assembly waits while it reads its links for the part
Finish Editing waits for dialogs, tools, sketches and prompts open in the part, also when run as a command
The assembly reads the edited part explicitly when it does not check its links on its own
The FINISH EDITING panel cannot be customized
A tab opened by an edit stays that edit's to close when the part is entered again
The mouse's back button finishes editing; the keyboard's only while no text field has focus
Refreshing the assembly keeps its selection and active component
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third review
component.finish_edit run as a command opens nothing and answers with an error when it cannot finish; engine.batch and engine.script refuse it
A double-click or Edit in Place while a dialog, tool or sketch is open in the assembly keeps it open
What changes in the assembly while it reads its links without changing its document stays: picks, activation, components dragged but not captured
Showing the assembly while it reads its links starts no second read
A new or opened design in the part's tab ends the edit
Finish Editing keeps the part's tab open while its agent chat runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: Update Links run as a command in the part refreshes the assembly too
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the ribbon button reads Finish Edit, as Finish Sketch does
A bare "Finish" took the catalogs' surface-finish translation (German "Oberfläche").
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the fourth review
Finish Edit waits while the part's agent is in the middle of its turn, instead of keeping the tab of any chat open
A part saved while its assembly refreshes is read again when the edit finishes: the refresh records the files as it found them
A double-click on a linked component while something is open in the assembly says so instead of activating it
Commands are recognised in any spelling the engine takes, so engine.batch and engine.script cannot slip Finish Edit through
Update Links run as a command refreshes the assembly from the control channel only, not for the app's own reads
Moves of components the refresh removed are not carried over, and a refusal is one message
The command description and the guide say that the command does not save the part
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: the command is Finish Edit, as Finish Sketch is
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: a command to start it, and fixes from the full review
Added component.edit_in_place {component, path?}: the double-click and Edit in Place in the menu run it, and as a command it asks nothing, so a network location not allowed yet or a design open elsewhere makes it fail instead
Finish Edit asked by the part's own agent finishes once that agent's turn ends; the button still waits for the turn
The parameters and design properties panels, with text typed and not applied yet, hold up entering and finishing an edit
A refresh is not taken up under an undo, a queued command or a feature still being computed in the assembly
Refusals say what holds them up (a refresh, a file being read or written) instead of nothing
The browser strip names the assembly that is refreshing, not any assembly
The schema description says the command does not save the part
Korean strings for every new message
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the second full review
The MCP batch tool refuses component.edit_in_place and component.finish_edit as steps instead of sending them one by one
Edit in Place asked while the assembly's agent is in its turn opens the part once the turn ends; a double-click then is refused rather than stopping the agent
Both commands answer queued: true when they wait for the agent's turn, and stopping the agent forgets what it queued
An undo, a queued command or a delete check running in the design holds up entering and finishing an edit
A refresh redraws every edit of the assembly, the parts in other tabs too
In an assembly never saved, a double-click activates the linked component as before
The control and MCP docs list the new batch and script refusals, and the commands list every way they fail
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: fixes from the third full review
The MCP batch tool refuses the two commands however a step names them, an execute step too
A queued Edit in Place is checked fully when asked for, a second one is refused, and both queued requests wait for what runs in the design instead of being dropped
Disconnecting the agent forgets what it queued, as stopping it does
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Edit in place: help text for the Finish Edit button
main now requires help for every toolbar command (#7134), and Finish Edit
is one. Written in every language the branch's catalog carries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6032
* View angles: an optional readout under the orientation gizmo and a command to set them (#6032)
View > View angles (also Preferences > Graphics, or view.angle_readout) shows the
view's pitch, yaw and roll in degrees and Ortho/Persp under the axis view or cube,
updated live; off by default. Clicking the readout opens a small card to type
exact angles, which runs view.apply.
The angles are the camera's own (Camera::view_angles / with_view_angles), about
the up axis: yaw is the heading of the line of sight (Front 0, Left 90, Right -90,
Back 180), pitch the eye's elevation (Top 90, Bottom -90), and a positive roll
turns the model clockwise. view.apply documents this convention and now refuses a
pitch past +/-pi/2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6380
* Cylinder: place by distances from reference edges, like Hole (#6380)
A Cylinder standing on a flat face can take up to two straight edges of
that face as references, each with the distance of its base centre from
the edge's line, measured in the face's plane, as a Single hole does
(#37). `solid.cylinder` takes them as `references: [{edge, distance}]`
with a numeric `base`; the edges are found again by their persistent
names, else their points, so the cylinder follows them when the part
changes, and each distance is a parameter (an input of Inspect Feature).
A cylinder without references stays at its base, as before.
In the Cylinder window, started on a picked face, Reference 1 and 2 take
the edges, each with its Distance measured from the pick, so it works
with the mouse alone; the canvas shows each distance with a box to type
it in, and Edit Feature picks the edges again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: Edit Feature shows each reference edge input once (#6380)
A face selected when Edit Feature opened the window had already added
the reference inputs; the edit added them a second time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder references: the measured-once cost test's cylinder has none (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: pick the face it stands on in its window, then the edges (#6380)
The Cylinder window took its place only from a face selected before it
opened, so started first it stood at the origin and offered no reference
edges. It now has a Face input before Reference 1 and 2, as the Hole
window does: start Cylinder, click the face, click the edges, OK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Glossary: reference edge, and "Reference" among the words with more than one meaning (#6380)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder edge references: the Cone dialog (#6250) gets the references field too
The Cone primitive landed on main after this branch began; its dialog initialisers lacked
the `refs` field the Primitive kind gained here. The dense form check for Cylinder fills only
its fields: its face and reference edges place it, which the reference tests cover.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Cylinder: declare references in its contract; reference-placed cylinders are not placement-independent
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Sketch: switch a circle or arc dimension between radius and diameter (#7499)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: Toggle Radius / Diameter for a circle's or an arc's dimension (#7499)
New command sketch.toggle_diameter, with input and output schemas, and a
context-menu item on a single selected radius or diameter dimension. The
circle keeps its size: the dimension's parameter is halved or doubled (a
plain value is rewritten, an expression is wrapped). Refused, with nothing
changed, when anything else uses that parameter.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #7077
* Repeat Last Command in command search, with a key you can change (#7077)
Shift+R already started the last tool or dialog again (#3045), but it was a
key the app kept for itself: command search could not find it and Keyboard
Shortcuts could not change it. It is now the command edit.repeat, with
Shift+R as its default key. A call through the engine is refused, because
only the app has a tool to start.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Arabic and Hebrew for the new strings
ar and he are complete catalogs on main now (#3458): every new message
needs them. The pending-messages test compares right-to-left messages in
display order once #7532 lands (#7527).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Locales: Vietnamese for the new strings
Vietnamese became a complete catalog on main (#5823), so every new English
message needs it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contracts for the cylinder, sphere, torus, pipe, bounding solid and scale
Contracts for solid.cylinder, solid.sphere, solid.torus, solid.pipe, solid.bounding_solid and
solid.scale, with `FeatureResult` output, and the shared types `AxisDir` (calling
`cmd::axis_dir_form`, split from `axis_dir_param`), `NumberExpr` and `ScaleFactors`. The
descriptions say what the evaluation does: the limits it enforces, the real default scope of
`targets`, and where `participants` overrides a key or has no effect. Scale makes no body, so it
declares `name` and `participants` itself. Box's descriptions get the same corrections. The
reply test runs every form in Warn and checks for no `param_warnings`; the guide lists the new
types and adds lessons from the conversion.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Typed contract for the cone
`solid.cone`, added on main beside the primitives this PR converts, gets its contract and
`FeatureResult` output: the cylinder's keys plus `top_radius` / `top_diameter`, with the
evaluation's limits in the descriptions (a radius above 0, a top radius of 0 or more, a height
that is not 0 and may be negative, sizes within 1e7 mm). A `null` top radius stays the handler's
to refuse, since the handler takes it beside a `top_diameter`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6724
* Extrude: the picked region is the one extruded again (#6724)
Since #5530 (#5302) every index or point pick grew to the whole drawn
profile that reference geometry cuts, so a lens or crescent clicked in
Extrude, where the face's projected outline cuts a circle, extruded the
whole circle while the dialog highlighted and counted one region.
Dialogs now send exact_regions: true with their profile picks, and the
command keeps each pick to the region it names. Picks without the flag
(scripts, agents, the CLI) still take the whole drawn profile (#5302).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Every new command comes with input and output schemas
A test fails for a command without a contract or an output type, unless it is a planned!
placeholder or listed in schema/unconverted.txt, which holds the 400 commands that predate
the rule and only shrinks: the test also fails when a listed command has its schemas, when
the list names a command that doesn't exist, or when it isn't sorted.
`checked!` now takes only the command's id and checks the contract that id publishes
(`run_checked_as`), so the contract enforced is always the one described. Another test runs
every command that has a contract in strict with an unknown key, so a contract is never
published without `checked!`, under the command's own id, enforcing it.
A new book page, Command schemas, explains how to write a contract and a reply type, the
tests to add, the shared field types and how to add one, with a checklist; the failure
messages point to it. "Adding a command", CONTRIBUTING.md and AGENTS.md now include the
schemas, and the MCP tool description and docs/mcp.md no longer list the converted commands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the commands added on main since: view.layout, view.history_layout, view.normal_to
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Command schemas guide: what participants and targets do, checking the evaluation, warning-free replies
- `participants` changes the result for some features and nothing for others; where it and
another key override each other, or where it has no effect, say so in that key's
description or in the summary.
- The example primitive's `targets` default to every body in the feature's component, not the
bodies it meets; they're ignored when `participants` lists bodies.
- Check what each value does where the feature is evaluated, not only how the handler reads it.
- A reply test runs every form in Warn and checks for no `param_warnings` (Strict for a reply
that isn't an object).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 43 commands added on main since: frame, component, render and others
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* List the 11 commands added on main since: browser folding, standard views, parameter sweep, path flange
browser.collapse_all, browser.expand_all, inspect.parameter_sweep, sheet.path_flange and the
seven view.* standard views (back, bottom, front, isometric, left, right, top) landed on main
without schemas; the gate flags them, as intended. 457 commands listed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Schema rule warns instead of failing for now
A command without input and output schemas prints a warning listing it
(test output and a CI annotation). SCHEMA_RULE_STRICT in coverage_tests.rs
(or SOLIDCRAFT_SCHEMA_RULE_STRICT=1) makes it fail again. Docs say "should,
and will become required".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #4098
* Extrude: document which way a positive taper goes (#4098)
A positive taper slopes the walls outward (the far end is larger along the
extrusion direction), a negative one inward. Say so in the params doc, the
JSON schema and the guide, and pin the sign with a test.
* Split the schema contracts into one module per command file
`schema/commands.rs` becomes `schema/features.rs` (solid.box, solid.extrude,
FeatureResult) and `schema/inspect.rs` (engine.describe), each with its own
tests file holding its `schemas_and_the_key_check_agree` key lists and its
`strict_keeps_todays_errors` cases, so conversions of different command files
touch different files. The shared loops become helpers in `schema/tests.rs`;
the assertions are unchanged. `engine.describe` gains a key-list test, and
`schema_defaults_are_valid` now covers every command with a contract.
No behaviour change.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add shared schema field types for the next conversions
For the feature commands to be converted next, each deciding acceptance with
the reader the handlers already use:
- `FaceRef` and `FaceRefs` (`face::face_ref`, `features::face_points`)
- `EdgeRef` and `EdgeRefs` (`features::edge_points`)
- `SketchRef` (`features::sketch_id`)
- `FeatureCommon`: `name`, `body_name`, `body_names` and `participants`,
which `add_feature` reads for every feature, flattened into a contract
with `deserialize_with = "feature_common"`, which keeps the key in the
message and the issue's path.
The shape checks of `face_ref`, `edge_points` and `sketch_id` (and
`feature_sketch`) move into pure helpers (`face_ref_form`, `edge_ref_form`,
`sketch_key`) that the handlers and the types share; the handlers behave as
before. Tests check that each type and its schema accept what the reader
accepts (apart from a face name's byte cap and an index written `1.0`),
that the contract's messages match the handlers' errors, and that the
handlers still look picks up one at a time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Spike: typed parameter contracts and JSON Schemas for solid.box and solid.extrude
The schema RFC's spike (plan/schema-spike.md). solid.box and solid.extrude get
typed contracts with generated JSON Schemas (2020-12), checked in front of the
unchanged handlers by a per-session level: off (the default, which changes
nothing), warn (the call runs and gains param_warnings) or strict (the call is
refused and the design left alone). Also engine.describe and the MCP tool
describe_command, `solidcraft-cli mcp --param-check off|warn|strict`, a
FeatureResult type for feature replies, and an env-var audit recorder
(SOLIDCRAFT_PARAM_AUDIT) used to check the contracts against every test.
Local spike branch; not for upstream as is (see the results report).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Parameter contracts: put the audit recorder behind a feature; drop two ignored test keys
The audit recorder is now on only in a build with the engine's `param-audit` feature
and `SOLIDCRAFT_PARAM_AUDIT` set. Its code is still compiled, linted and tested without
the feature. `scripts/param_audit.py` summarises a test run's audit logs, and the schema
module's docs give the steps for converting a further command.
Two tests passed keys their command ignores, which the audit found: `position` on
`solid.box` (`hole_face_tests.rs`) and `symmetric` on `solid.extrude` (`face_tests.rs`).
Both are removed, so the tests build what they always did. Comments no longer call
the contracts a spike.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>