Commit Graph
147 Commits
Author SHA1 Message Date
Yeonghun LeeandClaude Opus 5.5 316b49cd84 Extrude from a whole face rounded by fillets: join, and cuts whose walls only touch (#2040) (#2041)
* Extrude: a join from a whole face rounded by fillets sweeps the face itself (#2040)

A face's sketch fits an edge that is no line or arc (the quarter-ellipses
where fillets meet a slanted face) as splines a hair off the body's edges,
so a join from the face touched the body along a face it did not match and
failed with "boolean Union: no result" after minutes. When the profile is
a whole planar face of the one target, the join now sweeps the body's own
face, which shares its edges and is sewn on along it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: a cut into a whole face keeps the walls that cut and moves the others off (#2040)

A cut from a whole planar face sweeps walls from each of its edges. Where
the face beside an edge turns away from the sweep (n_N . -n_P >= 0) the wall
only touches the body along that edge, or lies in the face beside it, and
the boolean failed on it with "no result". The cut now keeps the walls that
go into the body, exactly (the body's own edges), runs the outline round
the others well outside the body, and starts a little out from the face.
A cut whose walls all only touch takes a slab beyond its depth plane.

Not covered: a cutting wall tangent to the face beside a touching one (a
round's wall meeting an end face, as in the issue's part); the boolean
still fails there.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Extrude: leave a whole face outlined by lines and arcs to the profile's own tool

Only a face whose outline the projection had to fit needs the body's own face as the tool. A square drawn over a box's top already meets the body exactly, and the swept face lost the names a sketch on the new top attaches to (stacked_face_tests, #489).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Run the whole cut tool from a face under the kernel guard (#2040)

Review: `builder::vertex`, `builder::line`, `Face::try_new` and
`builder::translated` ran outside `crate::guard`; only the sweep was
guarded. `cut_tool` now runs all of it under one guard.

Adds an end-to-end test of a cut into a face the body stands out past
below it (the block's top strip between its rounds): it takes only
what lies over the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* test: the slab cut of whole_face_tool, on a spline prism (#2040)

A prism on a closed spline standing on a wider plate, cut 3 into its whole
top face: the slab takes the face's area times the depth and leaves the
plate alone. A test-only counter asserts the slab was the tool, so the test
cannot pass through the profile's own tool. Shortens the name of the
rounded block's top-face cut test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Kernel: the face's outline as a Vec now that polyline returns a closed chain (#2040)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-21 00:41:41 +00:00
932d8d6b4f Tessellation: trimmed faces of display meshes stay on their surfaces (#1653)
* Tessellation: trimmed faces of display meshes stay on their surfaces

Display meshes triangulate a trimmed face in parameters scaled by the
surface's speed along each, so a strip stretched along one parameter is
not fanned across, and every boundary segment stays a constraint: one that
crosses another is split where they meet. Boolean meshes keep truck's way.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Tessellation: one boundary rule for every mesh; drop the #1648 retry

A boundary segment that crosses one already added is split where they
meet in Boolean meshes too, which keeps a pinched face (#1648) whole
without the snap-and-retry. Faces whose segments all go in mesh as
before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Robustness goldens: seeds 1, 23, 55, 64 and 86 re-recorded on current main for #1653

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Thread preview test: wait for the stale fit error to clear before the next preview

After switching back from M6x1.3 to M8x1.3, wait_feature_preview stopped at the M6 error still on
screen when the new preview started a few frames later (seen on Linux CI with #1653's meshing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

* Robustness goldens: the slow seeds 14, 20 and 40 re-recorded for #1653 from the merge queue

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 16:49:45 +00:00
bherbruckandClaude Opus 5.5 349a6c6fc4 perf: a copy placed for showing doesn't turn its revolved faces again (#3044) (#3104)
Moving an occurrence places every body under it again, and each placed copy
searched every revolved face for where it sits to turn it away from its seam,
although its source had been turned already. On the Prusa Core One assembly
that search was most of the 12.7 s a move of the top occurrence took. A body
now records that its revolved faces are turned, and world placement
(`place_matrix`) skips the search for such a body. Modelling moves (pattern
copies, hole tools) keep `transform_matrix`, which still turns them in the
copy's own frame: where a face wraps all the way round the turn it finds
depends on those coordinates, and later booleans depend on it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:01:56 +00:00
SS-ENandClaude Opus 5.5 ac757960dc Boolean retries: a candidate whose edges run far outside the operands is discarded unmeshed (#3020) (#3185)
The retries in boolean_whole_inner mesh every candidate to compare its
volume. A nudged union at the coarse tolerance could come out with a face
on a cone whose trim loop ran metres along the cone's continuation (edges
up to 12.7 m outside a 155 mm part); meshing it took seconds to minutes per
face and once never finished, though its volume (+-1e10 mm3) failed the
check anyway.

check() first samples the candidate's edges (16 per edge) and discards a
candidate with a point further outside the operands' mesh box than 5% of
their size (or a non-finite point): no edge of a union, cut or
intersection can lie there. The reason goes into the new
BooleanDiagnostics::rejected (omitted from JSON when empty). Results of
sound candidates are unchanged.

On the reporting design the PitchTail join drops from 18.7 s to 4.3 s with
the same result; the regression tests synthesize a cone face whose loop
runs off its surface.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 10:45:27 +00:00
14b7529465 Loft guide rails (#201) (#3371)
* kernel: loft guide rails (#201)

A loft follows one or two guide rails between its sections: stations are added between each two
sections, each the plain loft there moved so that the point a rail guides lands where the rail
crosses the station's plane — turned about the loft's direction and scaled (or stretched across
to the rail) with one rail, carried, turned and sized between two. The sections and caps stay
exact; the smooth loft runs through sections and stations. Solid and sheet lofts.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* doc, engine: solid.loft and surface.loft take guide rails (#201)

`rails` (one or two {sketch, curves}) and `rail_fit` (scale | stretch), stored on Loft and
SurfaceLoft (one pending format note), parsed by the sweep's rail parser (now shared) and built
through the kernel's railed loft. Rails on a loft to a point, or on a surface loft with edge
sections or end continuity, are refused as not supported yet. The rails' sketches are walked as
the feature's references and their components placed like a sweep's.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ui: Rail, Second Rail and Rail Fit in the Loft and Surface Loft dialogs (#201)

The rail inputs and fit row the sweep dialogs have, shared through dialogs_sweep; Edit Feature
brings the rails back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs(roadmap): loft guide rails (#201)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: review clean-ups (#201)

- Sweep and loft rails share one turn-and-size map (`sweep_path::rail_frame`).
- A station's middle and the loft's direction come from one curve through the sections'
  middles (exact derivative) instead of two more plain-loft evaluations per station; at most
  33 wires, so railed faces stay light.
- Nearest points on a section use `param_on` (kept only where the search comes nearer); the
  size uses `Aabb3`; one B-spline builder; anchors keep their nudge.
- The railed and plain lofts share one path in `loft_with_rails` and `loft_sheet_with_rails`.
- The engine leaves the not-yet-supported refusals to the design's evaluation; both lofts start
  their rails from the first section's first point.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* loft rails: refuse rails on sections with holes, with a test (#201)

Main's lofts now take sections with holes (#2447); rails shape only the
outlines, so a railed loft of rings is refused until the rails carry the
holes too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 03:22:30 +00:00
bherbruckandClaude Opus 5.5 d0afc31632 Save the evaluated model with every design: exact, stored once, scaled caps (#3053) (#3093)
* Model cache written by default: exact bodies, stored once, scaled caps (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: say why bodies were not kept

* Exact planes and revolutions; budgets for large bodies (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Native B-rep: rebuild shells as the kernel made them (closed and seam edges) (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* docs: the model cache and the exact native B-rep (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* bench-open: time a save without the cache too

* Model cache entries are Deflate-compressed (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Model cache: one that does not fit the design file is left out, never a failed save (#3053)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 02:31:08 +00:00
e661e6f809 inspect.clearance: pins on one cylinder with their hole are answered or reported in seconds (#3027)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: pins on one cylinder with their hole are answered or reported in seconds

A pin seated line to line in its hole, on its axis, and with a blend running into its wall
(a fillet under a head) sent the boolean through minutes of retries that ended unchecked; a
pin a hair off its hole's axis was passed as clear. Clearance now asks first whether the pair
holds such a pin (from the faces' surfaces alone). On its axis the boolean gets a few tries,
which answer plain pins at once; a hair off, or when those tries fail, the shared volume is
worked out apart by coaxial_overlap, which now also takes the zero-offset, equal-radius case,
moves the hole's wall when a blend keeps the pin's from moving, and checks its band more
tightly. What neither answers is reported as unchecked, naming the pin.

The kernel gains with_attempt_budget: the booleans run inside it get a number of tries of
the kernel's own intersection between them, the same on every machine.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: the pin tests sit beside the other measured pairs, not at the file's end

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: the bodies left whole meet their booleans with their meshes kept

A body that meets several others at one size (a bracket with balls pressed into it) was
meshed again for each pair's intersect: only the clipping used the copies that keep their
meshes. The intersect, the pin work and the union check now take those copies too.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* Near-coaxial overlap: ten tries per intersection, enough for a flush head pulled back

#1984's headed pin made before its plate needs more than eight.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Aac7mP9rthK3WsPpPRvCsF

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 00:09:50 +00:00
fkirill 3ffd8efffc Loft: preserve holes through matching sketch sections (#2435) (#2447)
Rebase the complete PR change onto current main, preserving changes previously stored in merge commits.
2026-10-19 23:57:07 +00:00
fkirill 983fbe2b14 Fix lip and groove on round objects (#2751) (#2790)
Thanks @fkirill.
2026-10-19 16:34:50 -04:00
1cd9983c8f Surface trim: projected curves, several kept regions, mutual trim (#767) (#1466)
* kernel: trim keeps picked regions, mutual trim, curves swept along a direction (#767)

Trim moves to surface_trim.rs: TrimKeep::Side (the old behaviour) or
Regions (the connected pieces the points pick, parted where the tool runs
along an edge). mutual_trim cuts two one-face surfaces by each other's
surface, extending one that stops short when asked. SplitTool::Curves takes
a sweep direction; a closed curve's field is signed by inside/outside
instead of extending its end segments.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* kernel: classify display edges of a face with a closed-edge hole without a panic

A hole cut by a closed curve is a loop of one edge that starts and ends at
one vertex; mapping the face rebuilt that edge through a check that
panics on it (the guard caught it and dropped every smooth flag of the
body). Such faces are now left out of the ruled-surface test.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* surface.trim: keep several regions, trim by projected sketch curves, mutual trim (#767)

keep takes a list of points (the regions they pick); curves: {sketch,
curves?, direction?} sweeps sketch curves onto the surface (along the
surface's normal: not supported yet); with + keep_with trims two
surfaces by each other, extend? meets a short one, stitch? sews the
kept pieces. Trimmed faces carry their lineage, so they are named
after the faces they are pieces of. New fields noted in a pending format file.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* Trim dialog: sketch curves as the tool, several keep points, mutual trim (#767)

The tool input takes sketch curves too; keep points are places (several
on one face add up); another surface with its keep points makes a mutual
trim with Extend to meet and Stitch toggles. Edit Feature brings it all
back. Labels in every locale catalog.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* ROADMAP: M8 trim by projected curves, several regions and mutual trim (#767)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:04:02 -04:00
SS-EN 3115c50359 Chamfer: two distances and distance + angle on curved edges (#2893)
Two-distance and distance + angle chamfers work on curved edges.
2026-10-19 10:14:18 -04:00
fkirill 5bed5196c7 Fix lens-profile cuts into revolved quarter spheres (#2791)
Lens-profile cuts into revolved quarter spheres now build (#2750).
2026-10-19 10:14:12 -04:00
SS-EN 771f62be71 Interference: clear apart pairs from their meshes, intersect the rest in parallel, time budget (#2895)
Thanks @SS-EN.
2026-10-19 09:14:52 -04:00
SiroArt 71534117af Mesh a face thinner than the tolerance instead of leaving a hole (#2712)
Thanks @SiroArt.
2026-10-18 21:56:28 -04:00
NOWN-DEV 8313c3468a Joint origins: resolve by the named face, keep a hole's end and the turn (#2186) (#2187)
Thanks @NOWN-DEV.
2026-10-18 13:08:23 -04:00
DuBearte e70bd52409 Extrude: a side drawn in collinear pieces is one face (#1788) (#1949)
Thanks @DuBearte.
2026-10-18 05:43:23 -04:00
83c31d77c4 surface.boundary: surfaces through boundary curves and curve networks (#763) (#2129)
* feat(geom): surfaces through curve networks, and spline spaces to build them

Adds spline_space (clamped B-spline spaces, Hermite interpolation, exact
embedding by Bézier degree elevation and knot insertion, a monotone cubic
for reparameterising) and network (loft, Coons and Gordon surfaces through
curves in one or two directions, with G1/G2 cross-boundary conditions
against a neighbouring face). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* feat(kernel): boundary surfaces from sketch curves, 3D curves and edges

kernel::boundary_network turns sketch chains, 3D sketch polylines and edge chains
into network curves, gives G1 frames of the faces along open edges
(EdgeFaces), builds the B-spline face (sides split at chain vertices so a
join shares the body's edges) and joins it into a surface body by stitching.
G2 is refused for now (not supported yet). Part of #763.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* fix(kernel): second derivatives of B-spline surfaces in the vendored truck-geometry

BSplineSurface::uuder and vvder multiplied the second differences by p
instead of p·(p − 1), as BSplineCurve::der2 does, so every surface of
degree p ≥ 3 (NURBS too, through its homogeneous surface) reported
1/(p − 1) of its second derivative: a cubic surface's curvature read as
half. This is why a G2 boundary surface on a cylinder measured half the
curvature it carries (#763). New tests hold both to finite differences
for degrees 2 to 5.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(kernel): G2 boundary surfaces against a body's face

The network always carried the face's curvature across a G2 edge; the
refusal came from measuring it with truck's halved surface second
derivatives (fixed in the previous commit). EdgeFaces now reads the
face's second fundamental form from the exact second derivatives
instead of differencing the normal. A new test holds the curvature
across a cylinder's edge to the cylinder's within 0.1%, also with a
sheared far curve; G3 is refused (a network holds up to G2).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(kernel): a boundary patch with straight corners measures its own area

A stadium's arcs meet its lines at 180°, so the Coons patch is singular
at its corners. From such a corner the reference mesher's boundary walk
ran onto the B-spline's extrapolation past its domain (a planar spline
passes through every point of its plane there), and the face measured
289 mm² for its 158.5 (#763). The vendored mesher's bounded projection
(nearest_projection, #2043) keeps the walk on the domain; this holds it
there, by the faces, the measuring mesh and the display mesh. The
display path (#1653) was never affected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(geom,kernel): three-sided boundary surfaces (one side collapsed to a point)

A network curve may be a PointCurve: the apex where the two sides beside
it meet. The curves through it cross it at the point itself, its row of
the net collapses there, and the kernel's face leaves that side out of
its loop (three edges, one vertex at the apex). One point per patch, as
a side; refused elsewhere, when it moves, or with a continuity
condition. Tests: a triangle and a quarter disc filled flat with their
analytic areas (40 mm², 25π), by geom and by the kernel's faces and
meshes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(doc): boundary surfaces through curve networks and loops of three or four

FeatureKind::SurfaceNetwork saves a network as `u` and `v` curves, each
a sketch chain (planar or 3D), a chain of a body's edges with an
optional G1/G2 continuity, or a point (the apex of a three-sided
patch), and an `operation` that can join the surface into the body of
its edges. A SurfaceBoundary of three or four sketch curves, refused
until now, builds as the flat Coons patch of its loop (three collapse
the side opposite the first curve). The format change is one pending
file; feature-walk goldens record the new variant's sketches, bodies
and points.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(engine): surface.boundary through loops of three or four and curve networks

The command keeps its loop form (two to four curves of one sketch; three
and four now build the flat patch of the loop, crown refused there) and
gains a network form: `u` and `v`, each curve a sketch curve id, a
{sketch?, curves} chain (planar or 3D), a {body, edges, continuity?}
edge chain (g1/g2 with the face beside it) or a {point} for a
three-sided patch, with `operation` new or join. Edits may move between
the two forms (timeline.redefine accepts the command now that it has a
dialog).

Tests: analytic areas of loop patches and of a hyperbolic paraboloid
bounded by four 3D lines (every mesh vertex on z = xy/10), a loft
across two sketches, G1 and G2 measured across a cylinder's edge with
inspect.continuity (angle < 0.1°; curvature jump 1e-16 with G2 against
0.027 with G1), 26 hostile networks refused without panicking, and u/v
added to hostile_params_never_panic.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* feat(ui): Boundary Surface dialog

Curves and Cross curves take sketch curves and edges (picks that meet
end to end in one sketch or body are one chain); Continuity and
Operation (New Body or Join). Two to four sketch curves of one sketch
with nothing across are the loop patch; anything else is a network.
Edit Feature brings either back (per-side orders, crown and stations
the dialog does not show are kept). Strings in en, ja and zh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* docs: ROADMAP M8 and the bridge patch's notes for boundary networks (#763)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* test(oracle): a boundary surface through a loop, thickened (#763)

Case 83: four sketch curves (a square's three sides and a half circle
for its top) make one boundary surface, thickened 2 mm; analytic values
from tools/oracle-analytic/cases_surfaces.py (V = 2A, area 2A + 2P,
centroid by moments). Recipes gain boundary_surface, thicken and remove.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* refactor: boundary surfaces, review cleanups

Project onto the face once per derivative evaluation (the frame is
passed to natural() and reused by scale()), keep each track's
finite-difference step instead of rescanning its table, export the
kernel's edge-pick and chain caps and the default station count for
the engine, doc and dialog to share, map TooLarge spline errors to
KernelError::TooLarge, reuse the engine's operation parser, and skip
the dialog's sketch lookup when the picks are no loop.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-17 21:47:38 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
fkirill 2c924fd385 Sweep: close circular tools before cutting a torus (#2005) (#2010)
Thanks @fkirill.
2026-10-17 12:46:21 -04:00
NOWN-DEV 8a2d142333 fix: a cut takes only its sketch, a join adds only it (#1310)
Thanks @NOWN-DEV.
2026-10-17 08:42:17 -04:00
NOWN-DEV 40abcbc8cf Booleans: prism cuts whose walls only touch the target are exact (#1894)
Thanks @NOWN-DEV.
2026-10-17 08:00:06 -04:00
DuBearte b04e0801d6 Per-command timings for script runs and batches (#1868)
Thanks @DuBearte.
2026-10-17 07:26:20 -04:00
Mateusz Sych d1b96100d3 Split Body: a plane lying on a face of the body splits it exactly (#1510) (#1897)
Thanks @SychPL.
2026-10-17 07:21:06 -04:00
NOWN-DEV 186555dbe9 Clearance report: overlaps, near pairs and nearest bodies (#1900)
Thanks @NOWN-DEV.
2026-10-17 04:54:39 -04:00
Mateusz Sych 3eae8c34f6 Fillet beside a hole: the suggested largest radius fits (#324) (#1885)
Thanks @SychPL.
2026-10-17 04:08:39 -04:00
NOWN-DEV c38992fc09 fix: booleans with whole-turn round faces read from STEP are exact instead of failing (#1892)
Thanks @NOWN-DEV.
2026-10-17 04:08:34 -04:00
NOWN-DEV 962070e955 Interference: a pin a hair off the axis of its hole gets its crescent (#1893)
Thanks @NOWN-DEV.
2026-10-17 04:08:31 -04:00
Irakli Kourtis 98ce6a4ee8 Sweep guide rails and two-rail sweep (#771) (#1806)
Thanks @jyviko.
2026-10-17 04:07:46 -04:00
Mateusz Sych 920ea42fe1 Revolve: a partial turn's planar faces come out whole (#726) (#1718)
Thanks @SychPL.
2026-10-16 15:26:10 -04:00
Mateusz Sych 31b2ddc0cf Split Body: the face a plane split cuts takes an attachment that follows the plane (#565) (#1746)
Thanks @SychPL.
2026-10-16 13:26:11 -04:00
cronos bba03803b7 Accelerate current-view DXF export and keep desktop exports responsive (#1738)
Thanks @crono2250.
2026-10-16 10:26:27 -04:00
bherbruck 2c020dbcbc Revert #1682 (three-axis milling) (#1715)
Thanks @bherbruck.
2026-10-16 09:02:19 -04:00
CypherNaugh_0x 737c9358d0 Add three-axis milling with independent CAM and Fusion validation (#1682)
Thanks @CypherNaught-0x.
2026-10-16 08:26:28 -04:00
Mateusz Sych d84d8c3222 Joint origin: a circle given by its centre (#393) (#1686)
Thanks @SychPL.
2026-10-16 08:26:14 -04:00
midasdf bbd4f29ebb Class-A surfacing 3/3: blend curves, curved-edge fillets, the G2 corner and continuity analysis (#1642)
Thanks @midasdf.
2026-10-16 06:26:27 -04:00
midasdf 07da7f8065 Class-A surfacing 2/3: surface match, boundary patch and CV fairing (#1487)
Thanks @midasdf.
2026-10-16 03:26:20 -04:00
phanoob 9bb65b4d68 Booleans: a prism cut beside the target's other faces takes the exact 2D route in a column (#1629)
Thanks @phanoob.
2026-10-16 03:26:13 -04:00
JIJINBEI 3333f8a62b Divide intersection edges from their neighbours' parameters (#1038) (#1412)
Thanks @jijinbei.
2026-10-16 00:27:55 -04:00
Irakli Kourtis fac3f96bdd Patch: G1/G2 to the faces beside the loop, general and N-sided loops, points (#759) (#1521)
Thanks @jyviko.
2026-10-15 23:07:24 -04:00
rlartot daf618c344 Edge division: evaluate each point once (#1560)
Thanks @rlartot.
2026-10-15 22:19:51 -04:00
6ad391fd75 Chamfer: refuse a result that grows a convex edge's part (#1428)
* Chamfer: refuse a result that grew a convex edge's part (or shrank a concave one's)

A chamfer of a curved edge that runs off a face it skims (robustness seed 57's
ball rim) built a part bigger than before. Checked from the two faces' normals
at the edge; rounds and unclear angles are left to the wedge bound.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Action matrix: the sheet metal tray's relief corners refuse a 0.25 mm chamfer

Each is a 2.5 mm concave edge (the corner of a corner relief, between two
planes at right angles): a chamfer there fills at most 0.25²/2 × 2.5 = 0.08
mm³. What was built took 0.95 mm³ away; the chamfer guard now refuses it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Robustness goldens: seed 57's wrong-way chamfer is now refused (#1390)

On main with #391, seed 57's chamfer grew the part; this refuses it, so the run goes on
to its later steps and ends ok.

---------

Co-authored-by: Phanoob <phanoob@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-15 14:26:30 -04:00
midasdf e8e2ccc8a9 Class-A surfacing 1/3: the continuity core, a G3 free-form blend and patch crown (#1249)
The continuity core (kernel bridge: Hermite control rows reproducing a support surface's position, tangent, curvature and change of curvature, G0 to G3), surface.blend between two edge chains (#764), and a crown for fitted patches. Existing patches and fillets are unchanged by default (crown 0 is the plain patch bit for bit). SurfaceBlend and Patch.crown are noted under format 22.
2026-10-15 13:32:16 -04:00
bherbruckandClaude Opus 5.5 4c7ea34a68 Web app: open and insert STEP files over frames, with progress and Cancel (#1376) (#1424)
* Web app: read a STEP file a piece per frame, with progress and Cancel (#1376)

The kernel's STEP reader walks the file first and converts its solids afterwards,
and StepReading exposes those stages: parse and walk, then convert a solid (or a
batch) per step, then finish into the shared import cache. The web app's file
load drives it from the frame loop for about 30 ms a frame, shows the same
progress card and Cancel as the desktop, and then runs the insert or open, which
finds the file already read. The desktop path is unchanged in behaviour.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Web app: make the imported bodies' meshes a few per frame too (#1376)

After the read, the insert or open runs, and then the bodies' display meshes are
made a frame's worth at a time ("Preparing the view"), as the desktop worker
warms them, instead of all in the first frame that draws the design.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 10:28:09 -04:00
bherbruckandClaude Opus 5.5 1744fbb262 Measure: centre-to-centre for holes, diameters for circles and arcs, slot sizes (#1392) (#1419)
Measure now reads the picked item's exact shape (cylindrical faces, circular and arc edges,
sketch circles, arcs and lines, profiles, planes, points):

- A circle, hole or arc shows Ø, R and its length (circumference, or arc length and angle).
- A slot (a sketch profile, or a half-cylinder end of a slot in a solid) shows its width,
  centre-to-centre length and overall length.
- Two items where one is round measure from the centre or axis by default (axis to axis,
  axis to plane, edge or point), with the closest and farthest distances listed too; the
  panel switches between centre, min and max, and the canvas line follows.
- inspect.measure and MCP `measure` (new `items` argument) add diameter, radius,
  center_distance, min and max; existing fields are unchanged.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 10:27:13 -04:00
Irakli Kourtis 5fa8e7d60a Sweep: orientation, twist and end scale (#1269)
Part of #771 and #772. solid.sweep and surface.sweep take orientation (perpendicular, parallel or a direction), twist (up to 4 turns) and end scale (0.01 to 100), applied about the profile's normal through the path's start; default options run the old sweep, so existing sweeps are unchanged. New fields are optional, left out when unset and noted under format 21; twist and scale are model parameters. Both sweep dialogs get Orientation, Twist and End Scale rows; labels in every catalog. Checked on main + this branch: cargo check --workspace, kernel/engine/UI sweep tests, the doc suite and the robustness goldens.
2026-10-15 06:24:31 -04:00
bherbruckandClaude Opus 5.5 8535d229ff Display helical-trimmed faces from imported threads correctly (#1289) (#1300)
A modelled thread as other CAD systems write it to STEP has cylinder faces trimmed by helices
that turn several times around the shaft, and cylinder faces bounded by two circles with no
seam edge. The display planner refused any face whose boundary winds around its surface, so
the whole body fell back to the reference mesher, which drew those faces with triangles across
the solid.

The planner now cuts such a face along a parameter line into one period: every loop and its
copies a period apart are clipped to the strip, and the parts of the cut line inside the face
join the pieces into closed loops, with the seam nodes made once for both sides. The cut face
is meshed by Delaunay with sag refinement, and the sag check runs once more after shaping.
Bodies with a face trimmed by more than one turn take their reference mesh (picking, measuring,
the CPU viewport) from the plan too.

Tests: an ISO M10x1.5 and M12x1.75 thread built from helices, as made and after a STEP round
trip: the display mesh stays within the tolerance of its surfaces and the thread's volume, and
has no degenerate, sliver or flipped triangles.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-15 00:51:30 -04:00
Irakli Kourtis b4edf05373 Extend any surface: natural, tangent and curvature, up to a target (#760) (#1166)
Extend works on any surface: natural (continuing the face's own surface), tangent (G1 run-off) or curvature (G2 run-off), by a distance, up to a plane or face, or back to the surface's bounds, with neighbouring edges lengthened to meet. Untrim and Extend share face parameter-loop helpers. The new SurfaceExtend fields are noted under format 21. Closes #760.
2026-10-14 22:46:29 -04:00
Irakli Kourtis 2a4907884b Ruled Surface: strips off an edge chain, exact where possible (#762) (#1151)
Ruled Surface: strips off an edge chain in normal, tangent, angle or direction mode, exact planes/cylinders/cones where possible, mitred or round corners, stitched into one surface body. SurfaceRuled is noted under format 21. Closes #762.
2026-10-14 21:44:56 -04:00
Irakli Kourtis 16c49c3e86 Untrim: holes removed and a face restored to its natural bounds (#1150)
Adds surface.untrim (#761); the SurfaceUntrim feature is first saved in format 21.
2026-10-14 20:29:25 -04:00
NOWN-DEV 2cab09f65b Join keeps its tool exact where the tool ends in the part's faces (#1244) 2026-10-14 20:18:09 -04:00