Commit Graph
31 Commits
Author SHA1 Message Date
Erlis VidalandClaude Opus 5.5 9e15995a74 A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)
A cut whose tool ends exactly on a face of the target (a hole cut from a pocket's floor up to the
plate's top face) could come out of the general boolean with the target's face whole over the hole
and the tool's end face under it: a skin of no thickness that keeps the hole closed. No volume
shows it and the sampled membership checks see the hole either way, so the result was kept. The
result check now refuses a body with a planar face lying back to back on another of its own planar
faces with nothing behind part of it (`coplanar::has_skin`), and the retries take the cut.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 04:15:37 +00:00
fe3b14e798 refactor: Aabb2 and point-built Aabb3 for every hand-rolled box (#2428)
* Iterate instead of indexing in nine loops

Replace index loops that look up neighbours by position with enumerate,
zip(cycle().skip(1)) for wrap-around pairs and zip(skip(1)) for
consecutive pairs. No behaviour change.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: ring_edges for the edges of a closed ring

Every walk over a polygon's edges, the last back to the first, spelled
x.iter().zip(x.iter().cycle().skip(1)); eighteen of them now call
geom::ring_edges. Three redundant take(len) calls go with them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Ring, a closed ring that knows it is closed

A Ring holds items in order around a closed polygon, loop or fan; edges()
walks each with the next and the last with the first, corners() each
with both neighbours. Ring<Vec2> has signed_area and even-odd contains.

Loop2::polyline returns a Ring, as do doc's face_loops and
boundary_loops, kernel's coplanar wire samples, CapLoop's segments,
tess pieces' rings, the gizmo's plane quads and the navigation cube's
facets. Their walks take edges() or corners() instead of wrapping an
index; sketch's text-hole test and doc's poly_area become contains and
signed_area. Loop2::joints pairs each segment with the next.

Replaces the ring_edges free function.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain, Ring and Path; bounds for a chain of points

Ring becomes Chain<T, Closed> beside Path = Chain<T, Open>: edges()
closes a ring and stops at a path's end, Path::close makes the ring,
and bounds() (the empty box for no points) serves both. Eight
hand-rolled min/max folds over a loop's polyline call bounds(); doc's
flat_polyline returns a Ring.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area and inside on Ring for any planar point

Ring's signed_area and contains take any Planar point (Vec2 or
[f64; 2]). The cam profile in joints_cam is a Ring: its own even-odd
test goes, and its edge walks, gap and area take edges(). face_params'
loop area, the text path's winding, tess pieces' ring area and the
copies in three tests call signed_area or contains; the formulas are
the same term for term.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: sheet's closed outlines go through Ring

dedup takes and returns a Ring (dropping a last point back on the first
is what makes it a ring's), near_outline walks a Ring's edges, and the
copy of it beside fold checks calls it. point_in goes: its callers ask
the Ring. Its formula anchored each crossing on the other end of the
edge, so the two can differ only for a point on an edge to the last
digit; one caller sets such points aside first, the others test a
region's interior point, a cut's midpoint or another outline's corners.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: cam tests build their outlines with Ring::from

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: area_vector on Ring<Vec3>; three Newell sums use it

Ring<Vec3>::area_vector is half the sum of a × b round the ring. heal's
loop_area, lip's outer-loop turning and the revolve's loop orientation
summed it by hand with a wrapped index; they take it from the Ring
(the half is exact, and two of them only read its sign).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3 from points; boxes built and asked through it

Aabb3 collects from points (skipping non-finite ones, as add does) and
gains inflated, contains and meets. Fifteen hand-rolled min/max folds
over points or boxes in kernel, doc and engine become collect or union,
and their "within tol of the box" tests become inflated(tol).contains.
blend's refused-edge boxes and naming's face index hold an Aabb3.

A NaN point is now outside every box, where the old negated
comparisons let it in; an infinite point no longer stretches a box.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb2, the plane's box; 2D folds and box tuples use it

Aabb2 mirrors Aabb3 (collect, add, union, inflated, contains, meets)
and adds relative, a point's place in the box. sketch's link and
link_loops each had that formula; link_loops' boundaries, prism's
segment and loop boxes, profiles' shape boxes and grid, and ends'
segment box hold an Aabb2 instead of a (low, high) pair. Folds in the
cam, sketch bounds, sheet's perforation grid and the sketch clipboard
collect one.

Boxes are built from the same terms (a round's box keeps c - r - tol).
As with Aabb3, a NaN point is outside every box and an infinite point
no longer stretches one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel: prism's segment boxes are plain Aabb2s

The SegBox alias named a (low, high) pair; Aabb2 says it itself.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Chain::bounds is an Aabb2; the boxes #2382 left as pairs follow

Chain::bounds returns an Aabb2. Its callers keep it: sheet's hole and
cut boxes (loop_box), letter boxes, island outlines and line-near-cut
test use meets, contains and inflated; profile's outline overlap and
max_clearance, profiles' box tests and the cam test read its corners.
flat_size and the flat pattern's JSON size are the union of the loops'
boxes (0 × 0 for no loop, where the pair fold gave -∞).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: Aabb3::intersection; hand-grown and hand-met boxes use the box

Aabb3::intersection is the box both hold. ops' four overlap boxes of a
boolean's operands take it, and seven boxes grown by hand (ops' body
boxes, the distance set's bounds, coplanar's face box, eval_more's
padded mesh box, compare's group and region boxes) call inflated with
the same amount on every side.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-20 03:44:49 +00:00
Artem Sushchev 80719744cf Union: when the slab past pushed-apart coplanar faces can't be cut off, trim it by editing faces (#2801) 2026-10-20 02:11:23 +00:00
JIJINBEIandClaude Opus 5.5 7ad5130cd2 refactor: geom::UnitVec3 for unit axes and normals (#2603)
* geom: UnitVec3; a face's analytic axes and normals are unit by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* geom: UnitVec3 adds to and subtracts from a Vec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc, engine: cylinder axes and measured normals held as UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, engine: functions that take a unit axis or direction say so by type

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* doc: a face's normal goes to Plane::from_normal as is

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* kernel, doc: main's new cylinder helpers take the face's axis as a UnitVec3

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:16:31 -04:00
Koschtetnix 487aa64e10 Multi profile extrusion performance (#2064)
Thanks @Koschtetnix.
2026-10-17 18:30:52 -04:00
Giovanni 48322f6464 Join a flange flush with a bent, tapered loft's end where the retry fails (#1391) (#1556)
Thanks @gvocale.
2026-10-15 22:19:22 -04:00
Que 1cc65cbc91 fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)
fix: a lip swept flush around a rounded rim joins the body it sits on.
2026-10-14 18:49:45 -04:00
Tobias Breckle a629236650 Join a floor into the hole it fills: grow the boss into the wall around it (#1212) (#1217)
Join a floor into the hole it fills: grow the boss into the wall around it (#1212).
2026-10-14 18:28:17 -04:00
bherbruckandClaude Opus 5.5 8fb5742706 fix: imprinting a partial contact boxes faces by their control points (#929)
#825 chose the faces to split by boxing each face, dividing its curved edges down to the contact tolerance; on the sensor enclosure's lid that division never finished (press/pull and extrude on 18 faces grew past 24 GB and timed out in the action matrix, on CI as here). The boxes now come from the edges' control points, with no division; a face whose extent can't be found counts as near. A test holds the lid's press/pull to a time budget.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 20:52:35 -04:00
NOWN-DEV 9184994721 fix: coincident faces are pushed apart only where that changes nothing (#817)
A coincident face is pushed apart only when the space it moves through holds nothing that changes the result; otherwise the boolean falls through to the exact strategies.

Co-authored-by: NOWN-DEV <257771410+NOWN-DEV@users.noreply.github.com>
2026-10-13 15:10:31 -04:00
bherbruckandClaude Opus 5.5 d2676da789 perf: imprint partial face contacts only near the contact (#825)
The partial-contact imprint (#704, #751) split every face in the contact plane against every tool face, one call per face, and measured all the tool's cylinders for each pair: the sensor enclosure's Case shell went from 6.6 s to 76 s and timed out in the CI matrix. Only faces near the contact are split now, each surface once, in one call: 7.0 s.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 15:06:55 -04:00
selune 293d660d6c fix(kernel): preserve intentional Split Face lines in contact joins (#782)
Intentional Split Face lines survive a join with partial planar contact, so the far face stays in two pieces. Follow-up to #704 / #674.
2026-10-13 12:46:34 -04:00
bherbruckandClaude Opus 5.5 a3dfbaa0b0 Booleans build the same body every time: face order no longer follows heap addresses (#748)
truck's face and edge IDs are their addresses, so walking maps keyed by them followed heap layout, and the ribbed lid's side-wall hole passed or failed by chance. The planar boolean's rebuild and glue now take truck's connected components in the shell's order, and the planar boolean's own maps are ordered. Healing's union-find keeps the lesser root and takes a run's ends in order of use. The face classification after an intersection orders each component's faces by the shell first. The lid now builds the same body on every run, with a test that builds it six times in one process. Its 0.5 mm side-wall holes, and one sensor enclosure hole of the same kind, now fail every time and are marked failing in the baseline.

Fixes #707.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 12:31:23 -04:00
bherbruckandClaude Opus 5.5 11c03fb0ab fix: imprint each surface once when fusing partial face contacts (#751)
Robustness seed 16 failed in most runs: the imprint split a block's side along both halves of a cylinder's round side, and the second split re-traced the first circle, sometimes leaving a sliver the glue could not match. The imprint now splits along each surface once (10/10 runs pass, 3/12 before).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 11:35:27 -04:00
bherbruckandClaude Opus 5.5 add4a18961 fix: fuse bodies that touch back to back over part of a face (#679, #674) (#704)
Two L's extruded up and down from one 2 x 2 grid now join into one solid (the planar rebuild gives each fan of faces around a pinched vertex its own vertex copy), and a pad whose end lies half past the edge of the face it stands on fuses exactly: contact faces are imprinted with each other's outline and the common faces glued away, still held to the retry guard. Face splitting handles a line crossing an edge twice; glue matches differently parametrised curves and keeps several pieces apart. Robustness seed 16 now fuses with the exact volume.

Fixes #679, fixes #674.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 10:02:44 -04:00
bherbruckandClaude Opus 5.5 29258767ce fix: refuse Boolean retries that change the part away from the tool (#616) (#644)
Joining ribs flush with a lid's window left a zero-thickness slit far from the rib (the planar fallback glued back only one of the faces its pieces shared) and displaced the tool on the other joins. Gluing now joins every shared face pair, coincident-face separation checks there is material behind a pushed face for every join, and any join or cut that needed a retry must be closed, keep volume monotonic and leave the part unchanged outside the tool's box, or it is refused with an error. Feature command replies carry the feature's warning.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 07:10:29 -04:00
Kevin Ravensberg 24cff445ad fix: fuse a loft standing on a face instead of returning touching shells (#577)
Fixes #396. A union that would come back as shells touching over an area is rejected and the face-in-face case is fused exactly; line and point contact stay as before.
2026-10-13 06:04:41 -04:00
Irakli KourtisandClaude Opus 5.5 01bf0e4eaf perf: pattern joins skip pushing apart faces that don't meet (#437)
Pattern copies of a post joined to a body already holding the original post had
their tops in its plane, so every join first pushed faces apart (about 190 ms,
then discarded). Faces now coincide only where their boxes meet, the push-apart
retry runs once per boolean instead of twice, and splitting prism outlines skips
the sampled arc projection for points off the arc's circle.
Sensor enclosure evaluation: 3.07 s -> 1.63 s, same bodies.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 19:35:43 -04:00
bherbruckandClaude Opus 5.5 296683229d Rename SolveCraft to SolidCraft everywhere, with compatibility shims (#389)
* WIP deep rename (not for push)

* WIP2

* WIP3

* WIP4 wxs fix

* rustfmt

* Rename the remaining identifiers in merged crash-report code

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 17:17:01 -04:00
Iraklis KourtisandClaude Opus 5.5 43ddde4a5d feat(kernel): an edge's meeting sides are sets of origins (merged faces)
EdgeOrigin::Meet now names each side as a Side: the sorted, de-duplicated
origins of the face there. substitute maps a side to the union of the inner
faces' origins, so a meeting with a face an inner operation merged keeps its
lineage; meeting() derives sides from whole faces. Fillets after box cuts
that leave coplanar pieces now report exact history. Prism lineage meets a
cap of several origins and resolves wall junctions away from shared
vertices by the operand's one edge between the walls. bore_union's recut
reports history only for a one-face bore (pieces of a two-arc bore's recut
wall were given both arcs).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
Iraklis KourtisandClaude Opus 5.5 08d7037176 feat(kernel): modifiers report exact face and edge history
Fillets (local, loop, rolling ball, corner, variable, chord), chamfers
(cutters, local corners, loops, two sides), shell, draft, offset faces,
split face/body, delete face, patch/copy/stitch/trim/extend and
transforms record their history over [body] while they build: faces
rebuilt from the body's, blends in place of edges (corner patches in
place of the edges at the corner), shell walls as offsets, edges as
pieces of the body's or where two faces meet. Multi-step operations
compose each step. The push-face offset fallback now has history, and
the bore union composes its narrowed tool.

A reflection reorders a body's edges, so transforms now match edges by
identity (mirrored copies reported the wrong edges).

Refs #136

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
Iraklis KourtisandClaude Opus 5.5 d5cb276965 feat(kernel): every boolean path reports exact face and edge history
ops::boolean's result carries its history over [a, b] whichever path made
it, recorded by the code that builds the faces:

- truck path (incl. jitter retries): shapeops history mapped through the
  order-preserving copies and the cut's turned tool, then through healing
- heal records which input faces each healed face merges and which input
  edges each joined or exact edge replaces (HealMap); opt-in, so heal_keep
  callers pay nothing
- trivial shortcuts, the void, glue, faces pushed apart (push_faces records
  its own history; the slab cut back on a union maps to the operands'
  faces in that plane), the nudged retry, by_lumps and join composition
- prism booleans: section segments carry tags (operand cap edge, the wall
  beside it, its vertices) through the 2D boolean; walls, caps and edges of
  the extruded or sewn result follow from them
- planar and faceted polygon booleans: polygons carry their operand face;
  faces join the pieces across edges, edges come from the pieces either side

History gains renumber/over (and consuming forms) for composition;
record gains regions/traced/build helpers. truck-shapeops
*_with_history now return the solid with an Option history. Paths that
cannot report (bore narrowing via offset, inexpressible lineage) leave the
result without history. Boolean results, tolerances and fallback order are
unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
2026-10-12 11:52:53 -04:00
f0dda667bb Report accepted Boolean retries on features and fuzz runs (#249)
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-12 10:38:04 -04:00
bherbruckandClaude Opus 5.5 0a526c6f85 fix(i18n): keep saved language on font failure, tighten CJK font matching
- Web: a failed CJK font fetch shows English for this session only; the
  saved language preference is kept (CjkFontLoader, persisted on save).
- Web fetches the CJK font only when a CJK language (ja) is selected.
- fonts.rs: directory scans match CJK-specific names only (no "noto" or
  "gothic"); CJK stays the last fallback after the Latin UI font.
- Revert unrelated clippy rewrites in component_clone.rs, coplanar.rs,
  canvas.rs and issue_report.rs to match main.
- Tests: default English, fallback order, CJK-only matching, fetch only
  for CJK, failed fetch keeps the saved language.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
2026-10-12 10:06:50 -04:00
Mithril-3d 1fee62dd54 feat: add web CJK font loading and robust cross-platform font detection 2026-10-12 10:06:50 -04:00
bherbruck ab05b24dee Prepare 0.2.0 usability release and refresh desktop demo 2026-10-11 10:55:55 -04:00
CypherNaugh_0x 8970254672 A drain pad whose bore is the drain hole's wall (a ring joined flush under a floor, or overlapping it) now joins instead of failing with "coincident faces on curved bodies": the mesh intersection can't take two walls on one cylinder, and the coincident-face push only knew planes. Such unions now narrow one body's bore (its walls pushed toward the axis, clear of the other's), join, and cut the original bore's cylinder out again over that body's length, which is exact when the cylinder holds no material of either body (checked on samples). Inside that step a face is pushed into the other body only as deep as there is material behind it all over, so a narrowed rim over the other's bore can't fill it; then the other body's bore is narrowed instead. Test: drain_pads_flush_under_a_floor_with_a_hole (ring flush and 2 mm into a 1° floor, and a disc across the hole, against hand-calculated volumes) 2026-10-11 13:01:54 +02:00
bherbruckandClaude Opus 5.5 1bf377c14b No panics in the boolean's final assembly (the web build aborts on any panic: the Plastic Enclosure sample panicked 8 times and crashed the browser's start page); face pushes check their result and fall back to the general offset (a boss standing on a plate joins again with off-axis cylinder seams); offset errors name the face they can't move; docs/robustness.md with the before and after rates; caught panics counted per design in the robustness runs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-10 00:04:37 +00:00
bherbruckandClaude Opus 5.5 fc7cb5d60d Booleans: prisms along one direction combined exactly in 2D (overlapping holes in plates; equal sections stacked end to end), bodies touching along one whole face stitched (a part joined with its mirror image), pushing coincident faces works with any plane-and-cylinder neighbours
Oracle: 60/76.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-08 04:53:49 +00:00
bherbruckandClaude Opus 5.5 2f39f0381a Kernel: push coincident faces apart before trying the boolean (no slow failing retries first)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 23:00:57 +00:00
bherbruckandClaude Opus 5.5 3229fd9740 Kernel: booleans with coincident planar faces push the faces apart exactly (perpendicular neighbours stretched or shrunk), union cuts the slab beyond the plane
Oracle: 29/29.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL
2026-10-07 22:41:29 +00:00