Every blend entry point asks `backend()` and, on SMLib, hands its arguments to blend_smlib.rs:
fillet, fillet_each and fillet_radii (a radius per edge), fillet_g2 (SMLib's G2 blend-curve
section between the round's contacts), fillet_chord (constant-width section), chamfer, and
fillet_variable_spline (the radius law as an SMLib B-spline law; fillet_variable and
fillet_variable_points reach it, and fillet_max, fillet_max_each and fillet_tapered run on these).
Options SMLib has no construction for are refused as "not supported yet", never built by truck:
G2 corner patches, and chamfers with two different setbacks (distance and distance, or distance
and angle; equal setbacks are the equal-distance chamfer).
Each pick takes the body's nearest edge in its own edge order, as truck's blends do, and SMLib is
given that edge's midpoint, so a pick at a vertex never leaves SMLib to choose between edges. The
body goes in tagged as operand 0, SMLib's check must pass, and the decoded result carries SMLib's
history in the body's orders, the blend faces given FaceOrigin::Edge of the edge each replaced
(the picked edges and the rest of their tangent chains). The truck path is unchanged.
Tests (with the feature): a round's volume and its face's origin, a size per edge for rounds and
chamfers, a linear law from either end, refused sizes and picks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
* WIP: adopt the saved model on open (#3053)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* WIP: tests
* WIP: bench-open opens as Open does
* docs: opening from the saved model
* Tests: an edit after opening evaluates from the feature it changes
* clippy
* Read SOLIDCRAFT_NO_MODEL_CACHE through the env helper
* Open: no picture from the model when the model itself opens; cancel test evaluates
* Saved model: bodies passed through found without writing their record; states list runs of bodies
* Adopted results go into the evaluation cache: an undone edit, or the marker rolled forward, takes them again
* Model cache size guard: the saved model's writer
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The exact surface search could return an arbitrary parameter at a collapsed NURBS boundary, which corrupted the trimmed triangulation domain and lost volume on fine meshes of a fillet tapering to zero. Search results in the boundary projection are now validated, preferring a bounded parameter at a pole and snapping to a finite endpoint only when its transverse tangent has collapsed and the residual improves. Adds four regressions for decreasing chord tolerances, pole parameters, unbounded planar support and provisional preview.
Fixes#796.
Adds `fit: taper` to Fillet: where a constant radius doesn't fit along a straight edge, it follows the room there as a smooth spline, down to zero where a face closes to a point. Taper to Fit is in the Fillet dialog, and the feature's warning says how far it tapered.
Fillets (local, loop, rolling ball, corner, variable, chord), chamfers
(cutters, local corners, loops, two sides), shell, draft, offset faces,
split face/body, delete face, patch/copy/stitch/trim/extend and
transforms record their history over [body] while they build: faces
rebuilt from the body's, blends in place of edges (corner patches in
place of the edges at the corner), shell walls as offsets, edges as
pieces of the body's or where two faces meet. Multi-step operations
compose each step. The push-face offset fallback now has history, and
the bore union composes its narrowed tool.
A reflection reorders a body's edges, so transforms now match edges by
identity (mirrored copies reported the wrong edges).
Refs #136
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01J53sR6gEaVt56soFDpTck8
kernel::fillet_variable_points(body, edge, start, [(position, radius)...], smooth): the radius law is a B-spline of the edge parameter (straight pieces, or C1 cubic pieces with Catmull-Rom slopes), and since every section's arc is affine in its radius the blend is exactly a rational B-spline (degree 2 across, the law's degree along) with B-spline contact curves on the faces. The largest radius along the edge decides whether the blend fits. Fillet type variable takes mid: [[position, radius expr], ...] and smooth; middle radii are parameters of the feature (Mid radius) and follow user parameters. Tests: straight pieces against (1 - pi/4) L (a^2 + ab + b^2) / 3 per piece, smooth against the integrated law, either end as start, refusals; engine test with a parameter-driven middle radius.
Refs #9
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01RjGw4gA5ZvKrU8MQP6sBgT
New kernel file blend_variable.rs. The hooks into blend.rs are visibility
only: plane_normal, vtx, rebuild_face and unsupported are now pub(crate).
- fillet_variable(body, edge, start, r0, r1) works on the same edge
configuration as the constant fillet (straight edge, planar faces, end
faces square to it). The radius runs linearly from the end nearest
`start`, and every section square to the edge is a circular arc. The
blend is an exact degree (2, 1) rational B-spline: arc control points
move linearly.
- fillet_chord(body, edges, chord): the radius per edge comes from its
face angle (chord = 2 r cos(phi/2)).
Fillet feature: style constant | chord | variable {radius2, start};
FusionFilletEdgesCommand takes type, radius2 and start.
Tests:
- Variable 2 -> 5 on a box edge removes (1 - pi/4) L (r0^2 + r0 r1 + r1^2)/3.
Starting from the other end gives the same solid; equal radii give the
constant fillet; too large is refused.
- Chord 4 on a right angle equals radius 4/sqrt(2).
- Engine: both types by command.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01AS5Tn3xieewUSg3uxrMVdL