* claim: #754
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
* Sketch Dimension: arc length from an arc and its end point (#754)
The arc-length dimension existed (sketch.dimension type arc_length) but
the Dimension tool could only give an arc its radius. An arc and one of
its own end points, in either order, now dimension the arc's length:
click the arc, then its end. The pair was refused before ("cannot
dimension that combination"), so no existing result changes. A point
where the arc's end is (a coincident line end) counts as that end.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SBN24y2TcqRcm2zn8Gkj27
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: hovering a circle's edge wakes its centre
A circle's or arc's centre was hard to take with Line or Dimension: it is a small
point in the middle of empty space, taken only within 8 points of the pointer, and
nothing showed where it was. Hovering a circle or arc of the sketch being edited
now wakes its centre: drawn (a cross in a ring) and taken from 16 points away, so
the pointer can go from the edge across the inside to it. Hovering another curve
or point puts it back to sleep, as does leaving the sketch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* A woken centre's extra reach yields to a curve under the pointer
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Browser: surface bodies get the surface icon in the Bodies folder (#4165)
Every row in the Bodies folder had the solid body icon, so a surface (an
open shell, such as a Surface Revolve of an open curve) looked like a
solid. A body whose shell does not close now shows the existing surface
icon; solids keep the body icon.
Body::is_surface walks every shell's edges, so ModelBody caches it once per
body (shared by clones, like outline_bounds) instead of the browser
checking it every frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Add the surface icon to the requested-icons manifest
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Look At in the viewport context menu for a planar face or plane
Fixes#4105
* Look At tests: turn the camera without the animation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4846
* Warn when Ollama models lack tool support (#4846)
Check Ollama model capabilities in the background and cache results per
endpoint and model. Show an advisory warning for models without tools,
expose it through ui.agent_chat, and document the behavior.
Cover capability parsing, warning selection, background probing, caching,
and selection changes with synthetic regression tests.
* Keep the Ollama capability probe out of the web build
The panel never calls it there, so it would only be dead code.
* Wrap the model warning instead of cutting it off
In a narrow panel the end of the sentence, the part that says what to do, was truncated.
* Fix AgentConfig default after rebase onto main
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Move the Ollama no-tools warning into a pending locale file with ja and zh
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
solid.loft already closes to a point (a section {sketch, point}), but the Loft
window's Profiles input took profiles only, so a pyramid or cone tip couldn't
be made from the UI. The input now also takes a finished sketch's point, sent
as an apex section in pick order; profiles of one sketch still make one
section.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #2348
* Open linked designs from assembly browser
* claim: #2348
* Test linked design action with multiple components selected
* Fix linked design lookup in browser storage and translate its menu action
* Add Turn Up Axis to complete UI catalogs
* Keep browser DXF download after linked-design checks
* feat: add colored components inspection toggle
* feat: persist component colors and add cycling controls
* feat: assign component colors in creation order
* fix: update component color menu integration and translations
* fix: proper description for pending format change.
* fix: deleted duplicated format change description from docs/pending.
* Compare the component colour counter in the features-only check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Vadim Kalinsky <vadim@kalinsky.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Sketch: a click picks the sketch's own curve over a projected one under it
* Select Other tests: follow origin visibility rename
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Own-curve pick test: click away from the lines' midpoints, which are picks of their own now
* Use the select-other test helpers main already has
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5543
* Extrude: a profile drawn twice is cut once, not as two coincident tools (#5543)
A circle drawn twice at one place is two profiles of one region. Extruded
together they were two coincident tools: a cut through a 121-hole grid with
four such circles retried the boolean with the tool nudged (four times) and
took 25 s instead of 0.5 s.
merge_regions, which every extrude, revolve and surface feature runs on the
regions it builds from, now leaves out a region whose boundary repeats an
earlier one (within 1e-7 of its size; corners and segment middles on the
other loop both ways, holes alike). The selection itself keeps its
multiplicities, as profile_refs' tests require.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6186
* Timeline: a reorder evaluates the design once, from the cache it already has (#6186)
timeline.reorder checked the move on a copy of the model, then dropped it,
so setting the reordered design evaluated the moved part of the timeline
again; reorder_many (and moving features into a group) checked on an empty
model, recomputing the whole design even for a move near the end. The
check now starts from the session's own model, and the session keeps the
model it was checked on.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Marker is Copy: drop the clone
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #5849
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX
* Context menu: a right-click on a face of a selected body keeps the selection (#5849)
A right-click selects what is under the cursor first, so the menu is about it. The check
for "already selected" compared the pick with each selected item by identity, so a face
of a selected body never matched: right-clicking a face of a selected body replaced the
whole selection with that one face, and the face menu opened instead of the body menu.
A face, edge or vertex of a selected body now counts as part of the selection, whether the
body is selected on its own or through an occurrence. The right-click then leaves the
selection alone, as it already did for a face in a multi-selection of faces (#3733).
selection::same_item is unchanged: dialogs and Select Other compare picks with it, and
there a face of a selected body is a different pick.
Fixes#5849.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01G1b41qKhyhmZoiAFYt9YwX
* Pass the held keys in the selected-body context menu test
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Move: placements of one part moved together each go the way asked (#4768)
A part placed more than once (an imported assembly's corners, screws or
fan blades) is one body in its component. Moving several of its
placements together moved that body once per placement listed, each
placement turning the move its own way, so the copies flew apart.
When solid.move names one part through two or more placements, it now
moves those placements in the world, as occurrence.move does with space
world: a placement held by a rigid group (an imported assembly) moves with
the outermost placement holding it, one inside another being moved isn't
moved again, and root-component bodies listed are moved as bodies, all in
one undo step. Other moves are unchanged, and so is a move with copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Free the grounded first part before the placement-move tests move it
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Test: a text's words follow its text parameters, and so does its cut
A sketch text whose words are an expression of text parameters (`Label + '-L'`): a parameter edit
and a configuration row that sets the parameter relabel the text, the text's cut follows, and the
expression is saved with the design.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Text parameters: a sketch text's words built from them follow every change
A design's parameters are numbers; a text's words (a part label, a size code) could only be typed.
Text parameters hold words: `parameters.add` or `parameters.change` with `unit: "text"` (the
expression is the text, quotes optional), and `sketch.text` and `sketch.edit_text` take
`text_expression` (quoted texts and text parameters joined by `+`, `Label + '-L'`) instead of
`text`. The text is laid out anew from its expression on every evaluation, so a parameter edit,
a configuration row or a script relabels it and the features built on it (a cut, an emboss)
follow in the same rebuild. The design file keeps the text parameters and each text's expression
(one pending format change); a configuration table's parameter column can be a text parameter;
the Parameters dialog lists them under the unit `text`.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01PsiqyXWBFGTCX9J51bhysc
* Text parameters: the joints' same-but-features check compares the text parameters
The joints are solved once per change unless the design differs only in its features
(same_but_features, #6372), which names every Document field. The text parameters are a
field of their own and change what a text's words evaluate to, so two designs that differ
in them are not the same but for their features.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
`cargo clippy --workspace --all-targets -- -D warnings` fails on Rust 1.97: the
reflection radiance bound in crates/render/src/raytrace/image.rs (#5494) trips
`clippy::manual_range_contains` (`v < 0.0 || v > 1e12`).
It now reads `!(0.0..=1e12).contains(&v)`. The two differ only for NaN, which the
`is_finite` check in front of it already refuses, so nothing else changes.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Project: don't lay a second copy over geometry the sketch already shows
A sketch on a face already holds the face's border, linked. Projecting that face
again, or one of the border's edges, added a second set of curves and points over
the first: on a rounded corner that shows as extra points and lines. Project now
skips a reference whose curves are all linked into the sketch already (lines,
circles, arcs), reports it as `already_projected`, and refuses a pick of nothing
new so it adds no undo step. Points on their own (the origin, a vertex) still
project.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Projecting the face a sketch already shows adds no second copy in the face scenario
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* claim: #976
* One set of X, Y and Z colours for every axis (#976)
The origin axes, the navigation cube's triad, 3D sketch triads and joint
origins drew `axis_x/y/z` (255,0,0 / 0,255,0 / 2,2,248), the view triad and
the headless picture drew `triad` (220,60,60 / 60,170,60 / 60,100,230) and
the Move gizmo drew `gizmo` (225,70,60 / 80,190,80 / 70,130,240). The
`triad` and `gizmo` tokens are gone: every axis reads `axis_x/y/z`, now the
view triad's values (the engine's `view::colors::AXIS_*`, so headless
pictures are unchanged, and the set the red-green table was measured for).
Older theme files' `triad` and `gizmo` lists still read and set the axes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5860
* Doc: stop the names of split faces from growing with every split
* Joints: the long-piece-name test takes the longest name a piece now gets
Split-face names are bounded at 512 bytes since #5860, so the test cannot
build one over 512; it takes the longest the history gives.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
#5187 fixed the frozen Render preview: product frames now set ss_ready
themselves instead of keeping the flag from the last Design frame, so
paint() no longer blits that stale offscreen picture. Nothing tested it.
The new test draws a see-through Design frame (offscreen, for
order-independent transparency) and then an opaque product frame on the
same renderer, and checks the middle pixel shows the product. With the
product branch's ss_ready update removed it fails with the stale red
Design colour, [255, 129, 129, 255].
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Home: a theme's File view follows its own colours where it sets none (#4868)
and no built-in theme sets them, so every theme kept Dark's or Light's blue rail and grey cards
under its own app bar and headings. A theme that leaves them unset now gets them from its own
palette: page and cards from its panel and dialog, the rail from its accent deepened as Dark's
and Light's are, the primary action from its soft accent, and each ink the one of its own colours
that reads best there. Dark and Light themselves are unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Leave a theme that sets no colours as its base palette
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* test: cover malformed and unbounded recovery metadata
Add regression tests for oversized JSON, mismatched entry IDs, and
non-regular recovery metadata. These expose failures in the baseline
recovery reader before the implementation fix.
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
* fix: bound recovery metadata reads and validate entry identity
Reject oversized and non-regular recovery metadata before reading it,
and bound the read if a file grows after inspection. Require each JSON
entry ID to match its filename for orphan listing and recovery loading,
preventing unrelated save paths from being attached to a recovered design.
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
* Format recovery.rs
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Signed-off-by: Taha Zarif <tahazarif380@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6226
* Offset Face: split a face off its seam and try again, as booleans do (#6226)
A hole's wall arrives from a STEP file as one whole turn bounded by one wire that
runs along its seam twice, where SolidCraft builds the same wall as two halves.
Offset Face heals the body before it moves anything, and healing such a face
fails inside truck with `This wire is not simple`, so the panic guard turned the
whole operation into a kernel internal error. Since importing is how a part with
a hole usually arrives, Offset Face did not work on imported parts with holes at
all.
`seam_faces` already answers this for booleans: split every such face in two
along a plane through its axis, run the operation, and compose the history back
over the body as it was given. This gives the offset path the same retry.
- `seam_faces::one_body` is `boolean`'s answer for an operation that takes one
body, with `needed_one` beside `needed`.
- `offset_faces` now does its healing, its face picking and its offset inside one
closure, so the retry runs the whole of it on the split body; the first attempt
is guarded, so the failure is an error the retry can act on rather than an
unwind. The faces are picked per body, because the pieces are numbered
differently once a face is split — the points do not move, so they pick the
same surface either way.
The regression test is in `seam_faces_tests.rs`, beside the boolean ones: a
20 x 20 x 10 block with a 6 mm hole, read back from STEP, whose top moves 2 mm
and lands on the same volume as moving the built body's top, with its history
intact.
Checked against `main` before and after: the three kernel tests that fail here
(`blend::…seam_twice`, `step_in::…parallel_body_preparation`,
`tests::a_box_cut_round_a_small_hole…`) fail the same way without this change.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: CarlosKeese <dudukeese@gmail.com>
Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
* claim: #4544
* Add Norwegian Bokmål translation
* Refresh Norwegian Bokmål translations against current main
* Drop Norwegian messages whose ids are no longer in the English catalogue
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #5103
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Redefine Sketch Plane names the plane a sketch is on now (#5103)
For a sketch with no body-face attachment the panel only said so. It now shows
a Current plane row: the origin plane, a construction plane's name, or the
plane it is offset from, turned from or flipped from. English, Japanese and
Chinese messages added.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Drop needless to_string calls in the plane name format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
* Themes: Okibi (dark) and Akari (light), from the Okibi design system
Two built-in themes mapped from the Okibi design system v1.8
(https://kaievns.github.io/okibi-akiri-design-system-spec/): cool charcoal
ash with a single ember accent, and its warm-paper light twin. Every one of
the 156 colours is set, so nothing falls back to the Dark or Light palette.
* Give the Okibi and Akari themes an icon palette
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #6392
* perf: apply a joint solve with indexed joints and occurrences
Every change to a design re-solves its joints and applies the solution. Applying it searched
the joints for each value and, for each occurrence the solve places, searched the occurrences
for it and walked its parents' first occurrences by searching again.
Joints and occurrences are now indexed once, keeping the first of each id as the searches
found it, and the parents' transform is read through the index as the loop leaves it
(component_transform shares the walk, transform_through).
Synthetic design, headless (2000 components at the root with one component inside each, 4000
joints, a solution placing every occurrence): apply 14.1 -> 2.2 ms (median of 12).
The new test applies a solution that moves a component and the components inside it, and
checks each lands where the solution put it, read through its parent as the loop has just
moved it.
* claim: #6394
* perf: group bodies, features and occurrences once in component.list
component.list searched every body, every feature (three times) and every occurrence (twice)
for each component, so its cost grew with components times contents. Bodies, features,
occurrences and children are now grouped by component once, keeping their order, and each
component reads its own groups. The output is unchanged.
The new test lists nested components and checks each gets only its own bodies, features,
sketches, occurrences and children, in timeline order.
* Dialog curve picks keep their sketch (#3726)
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Format
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Adapt context-menu test to Sel::SketchCurve's sketch field
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Path Flange picks keep their sketch too
Path Flange (#4096) landed after this PR and still looked its path up in the newest sketch with those ids.
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* Home: stop a recent card spinning forever when its picture can't be made (#4655)
A recent design whose thumbnail job returned no picture (empty or unreadable design) kept the loading placeholder, which draws a spinner, with no retry. Record such keys as a terminal 'failed' state and draw a box placeholder instead; opening or saving the design clears it and tries again. Sample previews are untouched: a failed sample build still keeps its shipped picture.
* Format the gallery sample row
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
---------
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
The row itself showed the key the command runs from (#1810), but its help
tooltip still named the default one.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
With G bound to the centre rectangle, G, Escape, R started the centre
rectangle again, because R's family remembered the variant used last
(#4308). A remembered variant that has a key of its own no longer takes
over the family's key; one without a key still comes back on it.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
When an agent's models come from several providers (Hermes and OpenCode
name each one "Provider · model" or say "Provider: ..." in its
description), the chat header shows a provider drop-down before the model
drop-down, and the model drop-down lists only that provider's models
without the provider in front. It opens on the provider of the model in
use; picking a provider alone changes nothing. ui.agent_chat takes
provider and reports providers and provider.
* claim: #3983
* Agent skill for reproducible bug reports (#3983)
skills/solidcraft-reporting has an agent gather the version, steps and
exact error, reproduce the problem in a fresh design (a command script or
one batch with rollback off), shrink it while it still fails, check the
numbers with measure and a screenshot, keep private designs out, search
for duplicates, and write the report in one shape: Reproduced on, Steps
with a minimal script, Expected, Actual, Attachments.
Listed in skills/README.md and docs/mcp.md; the bug template's steps
field points agents to it. The skill-name check now covers its files.
* Reporting skill: GitHub takes a design only as a .zip
* Show scroll arrows on the theme row when more themes are hidden
* Fade the theme row edges and use the chevron icon for its scroll arrows
* Remove the outline left on the theme row arrows after a click
* Trim the theme row scroll arrow tests
* Drop the earlier theme row arrows' test and labels
In an assembly the bottom timeline listed every feature of every component,
unreadable with a few dozen parts. While a component is active (or one is
picked in the browser), it shows only that component's features and those of
the components inside it. A toggle ahead of the features names the component
and switches to the whole design and back. The marker and drops map from the
shown features to the design's positions.
Tests: the_timeline_shows_only_the_active_components_features,
a_slot_among_the_shown_features_is_a_design_position.
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
* claim: #4323
* Gruvbox Dark and Dark Soft: readable selected tab labels (#4323)
The Model tab and the shared tabs (Assemble, Insert, Inspect, Manage,
View) draw their selected label in selected_ink on accent_soft. Both
Gruvbox dark variants inherited the default dark selected_ink #9cc7f5,
which reaches only 4.48:1 on #48544f (Gruvbox Dark) and 4.13:1 on
Set selected_ink to the Gruvbox foreground #ebdbb2 in both files:
5.76:1 and 5.31:1. Tabs with their own accent keep their own ink.
A test checks the selected label of every workspace and contextual tab
against its soft background in Dark, Light and every built-in theme
file.