Commit Graph
5 Commits
Author SHA1 Message Date
jyvikoandClaude Opus 5.5 1d8299aedf kernel: an SMLib body keeps each edge's and vertex's tolerance through its record
SolidCraft's own record of a body SMLib made (the rig's record check, the saved body, the next
SMLib import) re-fitted every pcurve at the kernel's working tolerance, 1e-5 mm. SMLib's fillet
and chamfer surfaces lie some 2e-5 to 2e-4 mm off their faces, so 15 fillet and chamfer cases
failed that check although SMLib's own passed. And SMLib reported one tolerance for a whole body,
the largest any part of it needed, so one loose edge (a pocket cut left one at 0.23 mm) made the
whole body loose on its way back into SMLib.

Now the tolerances go per edge and per vertex, both ways:
- solidcraft-smlib reads and writes the fork's new SMLIB_FLAT_EDGE_TOLERANCE and
  VERTEX_TOLERANCE arrays. Export gives each edge and vertex record its own (never below the
  floor, which becomes the body's). Where those understate what an approximated edge needs on
  its face (SMLib holds a blend's end curve 2.3e-5 mm off its plane at 2e-5), the export falls
  back to SMLib's largest everywhere, as before. Import writes each record edge's and vertex's
  tolerance.
- `geom::brep::pcurve::EdgeUse` carries its edge record's tolerance, and a pcurve is fitted to
  it where it is larger than the face's.
- The kernel's decoded body keeps its record's edge and vertex tolerances
  (`Body::tolerances`, in its edge and vertex order) after an SMLib operation and a saved body's
  decode, and keeps them through a rigid placement. Its record writes them again; anything that
  builds a new solid drops them.

SMLIB_REV moves to the fork commit that adds the arrays (smlib-blends-abi2 4a67471, ABI 2).

Rig and ladder fillet and chamfer cases on SMLib: 43 pass before, 60 now, none lost. Tests: a
pcurve fitted to its use's own tolerance, and the ladder's 08/006 cylinder rim chamfer whose
record, saved body and placed copy all stay valid and SMLib's check takes back.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01QWhMwdqJYQKQq8RCLSL1LT
2026-10-27 02:28:47 -04:00
93a2922c5e Display plans and the model cache for large STEP assemblies (#2814) (#4021)
* STEP import: mesh band faces that wrap around a closed surface correctly

Fixes two related bugs that caused SolidCraft to fail to mesh a face wrapping
all the way around a closed, non-periodic surface (a revolved ridge band, or a
tube-shaped B-spline surface): a missing face, a folded/self-overlapping
triangulation, or a hole in the rendered body.

1. Ring edges that run slightly off their surface. STEP files write a surface
   and the curves bounding it to the file's own declared uncertainty, so a
   ring edge can legitimately sit a few micrometres off the surface it
   bounds. The code finding where a ring edge crosses the planned split line
   compared against the edge's raw (off-surface) point using a hardcoded
   tolerance far stricter than the file's own precision, rejecting a valid
   cut. Now matches against the point on the surface directly below the ring
   crossing, respecting the file's declared tolerance.

2. Closed B-spline surfaces, their slits and their slivers. truck only treats
   the rotation of a revolved surface as periodic; a face on a B-spline
   surface whose control net closes on itself (a tube) wasn't recognized as
   wrapping around at all. This produced a folded face, a hole (a boundary
   loop landing a full period away from where it should cut), and one
   near-zero-width sliver face costing the entire body its tessellation
   plan. Adds periodicity detection for closed B-spline surfaces, period-
   aware hole-loop alignment, dropping of zero-width slit boundaries, and
   isolating a too-thin-to-triangulate face so it no longer takes the rest
   of the body down with it. The GPU shader's periodic wrap mirrors the CPU
   math so the two don't drift apart.

Regression tests: band_faces_split_when_ring_edges_run_off_their_surface,
band_face_with_a_zero_width_slit_is_still_meshed,
a_sliver_face_too_thin_to_triangulate_does_not_cost_the_body_its_plan.
Ablation-tested: disabling either mechanism in (2) reproduces its target
test's original failure message while leaving the other test unaffected.

* STEP import: mesh the band's split faces, not just split them

jyviko asked whether a band wall missing from the interactive app's render
was a shading issue or a genuinely missing face. It was missing: the ring-
edge split fix made the band's topology correct, but plan_face still
produced zero triangles for the two new sub-faces.

Two causes, both in plan_face (crates/kernel/src/tess/mod.rs):

1. The tolerance for how far an imported boundary may lie off its surface
   was tied to the requested mesh's chord tolerance instead of to the
   body's own size. A finer display tolerance could then reject a boundary
   a coarser one had just accepted, so the face would drop out exactly when
   zooming in on it.

2. Near a sharp corner of this flat-panelled band, several boundary points
   that are legitimately a few micrometres apart (within the STEP file's
   own declared precision) all projected onto the same surface point. The
   boundary loop then repeated a point in (u, v), which a triangulator
   can't follow, so the face's plan failed outright. One face without a
   plan costs the whole body its plan, and the fallback mesher can't
   handle a closed B-spline surface either, leaving both halves of the
   split band with no triangles at all: present in the topology, invisible
   in every renderer, and absent from the body's volume.

Fix: scale the off-surface tolerance to the body's own extent (new
Rules::extent), and collapse a run of boundary nodes that land on the same
surface point to one (drop_collapsed) before triangulating.

Regression test additions to band_faces_split_when_ring_edges_run_off_their_surface:
the body's volume now matches the analytic pentagon prism (was a third of
it - only the top cap - before this fix); display_plan leaves no face
without triangles from coarse to fine tolerance; and the actual tolerance
and facet angle the viewport draws with gives the split band its full
lateral area on both halves.

Confirmed on review_band_big.step, the fixture behind the review screenshots:
volume's relative error against the analytic pentagon prism drops from
1.4e-4 to 4.1e-6, and the band wall now occludes the floor grid behind it
in a snapshot the same way the top and bottom caps always did.

Full kernel suite: 739 tests, 0 failed.

* STEP import: hold an imported boundary to the file's own tolerance, not the part's size

jyviko: the off-surface acceptance added in the last commit
(rules.extent * OFF_SURFACE) scaled with the part, so a 2 m part
silently accepted a boundary 2 mm off its surface while a 20 mm copy
of the same part accepted only 0.02 mm. A STEP file's own declared
uncertainty does not grow with the part, so the bound shouldn't either.

Body gains boundary_tol: Option<f64>, Some(file's declared tolerance)
for a body read from STEP (crate::step_in::Units::tol, already used
by the ring-split fix in split.rs), None for anything this kernel
built. It's set before the import's own unmeshed-face check runs, and
carried over by the two face-split operations that re-cut an imported
surface (splitface.rs, outline.rs), since the file's uncertainty still
describes those boundaries afterward.

plan_face's accept now reads: the file's own tolerance when the body
declares one, or the old chord-tolerance/extent bound otherwise. The
old bound's tol * 10.0 term had to go too, not just the extent term:
at a 2 m part's typical display tolerance that term alone is ~20 mm,
nearly ten times the extent bound jyviko objected to, so keeping it
would have left the exact 2 m/2 mm example still silently accepted.

Two new tests in step_in/tests.rs:
- band_faces_split_when_a_scaled_copy_runs_off_its_surface: the same
  band fixture at a realistic 2 m scale with the same absolute slop
  and declared uncertainty as the small one, meshes the same way at
  every chord tolerance from coarse to fine.
- off_surface_budget_follows_the_file_not_the_part_size: the actual
  regression. The same off-surface error is accepted or refused the
  same way whether the part is 20 mm or 2 m; a 2 mm error against a
  1 µm declared uncertainty is refused at both sizes now (accepted at
  2 m under the old bound, refused at 20 mm - that asymmetry was the
  bug). Checked at both a coarse and a fine display tolerance.

Known gap, not fixed here: a STEP-imported body saved into a
.solidcraft design and reopened loses boundary_tol (native.rs's
decoder has no field to read it from) and falls back to the old
extent-based bound on reload. Today's design format has no concept of
this value at all; persisting it is a real format change, out of
scope for this fix.

Full kernel suite: 776 tests, 0 failed. clippy -D warnings clean.

* Display plans for STEP threads and pointed ends (#3847)

Three faces cost a threaded or pointed STEP part its whole display plan, so it
was drawn from the reference mesh: cracked, faceted, and never refined up close.

- A loop through a pole (a cone's apex on the boundary) seemed to wind around
  the surface: the jump at the apex, unwrapped to the nearest copy, was
  arbitrary. The loop is turned to end where it leaves the pole, so the step
  that closes it is an ordinary one (`seam::close_through_pole`).
- Projection onto a spline with hundreds of spans (a helical flank) restarted
  from a 16 x 16 grid and settled on another turn; it now starts from two
  points per span, capped.
- Sag refinement no longer inserts a point exactly on a boundary side, which
  split the side and failed the face.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* tess: a refused face's edges are divided finer and it is planned again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: sliver faces plan empty; a face no method plans is filled flat from its nodes (#2814)

A face whose boundary runs out and back along itself (two edges between the
same vertices, a rounding apart, as STEP files write slivers) encloses nothing
and is planned with no triangles. A face still refused after its edges are
divided finer (a cusp, a sliver whose sides sag across each other, a small cap
at a pole) is filled flat from its shared boundary nodes, so the rest of the
body keeps its display plan instead of falling back to the reference mesh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* display mesh tests: a rim the chord tolerance leaves a line is divided again (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* portable B-rep: up to 8192 control points along a spline direction (#2814)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* solidcraft-cli: --debug logs what the engine reports to stderr

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: a spline written over a tiny parameter range is read over one (#2814)

Some writers parameterize splines over a few millionths (a humanoid robot's
edges span 5.4e-6). The kernel tells parameters apart only to 1e-6, so over
such a range it evaluated the curve's end wrongly, and trimming an edge to its
vertices dropped a control point: the bodies could not be stored exactly and
the whole model cache was left out of the design. The knots are now stretched
to span one; the curve is the same and edges are trimmed by their vertices, so
nothing read from the file refers to the old parameters.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* model cache: a body keeps its file's declared accuracy (#2814)

A body restored from the cache dropped the accuracy the file it was read from
declares, so the planner held its boundaries to the kernel's own bound and a
reopened design drew differently from the import. It is stored with the body's
runtime values, and only when there is one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* tess: a boundary within a hundredth of its body lies on its surface, at every quality (#2814)

#1721 held a body read from a file to the accuracy the file declares. A writer
declares what it aims for, not a bound its edges keep: a 251-body robot
assembly declaring 0.01 µm has boundaries 10 to 30 µm off their surfaces, and
95 of its bodies lost their display plans. The bound is a hundredth of the
body again, what Normal quality always allowed, and now the same at every
quality, so zooming in still never drops a face (#1721's point). A file
declaring more raises it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

* STEP import: keep faces whose edge vertices sit slightly off their curves

Some exporters write an edge's vertex beside the end of its curve, further off
than the accuracy the file declares (a surface export declares
0.01 mm and puts a vertex 0.19 mm off two spline ends). The reader refused
such edges and left the face, and with single-face bodies the body, out.

A vertex may now sit up to the file's tolerance or 1/1000 of the model's size
(the diagonal around its VERTEX_POINTs), whichever is larger, never more than
the existing 1 mm ceiling. Spline and open-conic edges have the end control
point moved onto the vertex, so every such edge meets its vertices exactly.
The file's declared accuracy still governs closed-curve, seam and circle
checks.

* tess, io: review clean-ups (#2814)

- A sliver face is one whose loops are all slit: drop_slits finds it in the
  retry after a failed plan, so the pre-check on every face (folded) is gone.
- The flat fill uses cdt::triangulate (a lenient fill that leaves out sides
  crossing one already kept) and its flood-fill inside test, and the plane
  from geom::Plane.
- Refinement only builds its indexes when a face was refused, takes the
  faces to plan again from edge_faces, and re-samples edges on the pool;
  Rules::finer for the finer rules.
- One PackageWriter::fits for the model cache, the preview and the thumbnail.
- The band split's ring tolerance lives in split.rs; comments say what the
  off-surface bound is now.
- The CLI logger prints Level::as_str().

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LGeCa5jWWdroMWvXxN3LLM

---------

Co-authored-by: David Lackovic <lackovicdavid1234@gmail.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: jyviko <2501648+jyviko@users.noreply.github.com>
Co-authored-by: Ray <raykholo@users.noreply.github.com>
2026-10-21 10:37:12 +00:00
bherbruckandClaude Opus 5.5 349a6c6fc4 perf: a copy placed for showing doesn't turn its revolved faces again (#3044) (#3104)
Moving an occurrence places every body under it again, and each placed copy
searched every revolved face for where it sits to turn it away from its seam,
although its source had been turned already. On the Prusa Core One assembly
that search was most of the 12.7 s a move of the top occurrence took. A body
now records that its revolved faces are turned, and world placement
(`place_matrix`) skips the search for such a body. Modelling moves (pattern
copies, hole tools) keep `transform_matrix`, which still turns them in the
copy's own frame: where a face wraps all the way round the turn it finds
depends on those coordinates, and later booleans depend on it.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-20 11:01:56 +00:00
02c77df5f7 inspect.clearance: mesh each body once per check instead of once per pair (#2867)
* inspect.clearance: pairs whose bodies did not change are not measured again

Each clearance check measured every close pair again, though between two
checks usually only a few bodies change or move. Results are now kept per pair,
keyed by both bodies' geometry and placement and the check's settings; a pair
whose two bodies are unchanged is taken from that cache. With 40 overlapping
parts, a check after moving one of them took 0.8 s instead of 23 s (741 of 780
pairs reused). Pairs that could not be worked out are tried again each time.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: boxes and placed keys exactly as before the reuse

The pair boxes are taken over the mesh's triangles with finite corners, as a
distance shape's are, so pruning is unchanged. A placed body's identity now
includes its model body's own frame, so two placements are never mistaken for
one another.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

* inspect.clearance: a large body is meshed once for all its pairs

Each pair that touches cuts the larger body down to the pair's region with a
kernel boolean, and that boolean meshed the whole body twice: once for its
checks and once inside the intersection. A sheet with 600 faces paid about
2.5 s per pair for meshes that were the same every time.

A body can now keep its meshes for reuse (Body::keeping_meshes); its booleans
take the meshes from there, and the intersection takes its shell meshes
from there too (truck-shapeops: and_with_history_meshed). Clearance uses such
copies for one check. Results are unchanged to the bit. On a 3 x 2 m sheet
with bends and 300 holes, the clip took 0.23 s per pair instead of 2.6 s, and
24 rivets took 5.6 s instead of 16.5 s.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
2026-10-19 16:14:24 -04:00
Que 1cc65cbc91 fix: a lip swept flush around a rounded rim joins the body it sits on (#1164)
fix: a lip swept flush around a rounded rim joins the body it sits on.
2026-10-14 18:49:45 -04:00